Edit mp4

hello
to those people that have the mercury play back engine
i wonder if you can edit mp4 without rendering and export it to mpeg2 format
please try this for me and let me know
if it work i would like to buy the card right away
thanks guys

we still go to tape so rendering is that final step.
That is not called Rendering, but encoding or transcoding.
In a number of cases it is important to use the correct terminology, like here. It is incorrect to say: "While sailing my car..." or "While flying my boat..."
One can avoid misunderstandings and miscommunication by using the proper terminology. OTOH, it may well be a shortcoming of the english language:
There is no egg in eggplant nor ham in hamburger; neither apple nor pine in pineapple. English muffins weren't invented in England nor French fries in France. Sweetmeats are candies while sweetbreads, which aren't sweet, are meat. Quicksand works slowly, boxing rings are square and a guinea pig is neither from Guinea nor is it a pig. Why is it that writers write but fingers don't fing, grocers don't groce and hammers don't ham?
If the plural of tooth is teeth, why isn't the plural of booth beeth? One goose, 2 geese. So one moose, 2 meese? Doesn't it seem crazy that you can make amends but not one amend. If you have a bunch of odds and ends and get rid of all but one of them, what do you call the thing left? Is it an odd, or an end?
If teachers taught, why didn't preachers praught? If a vegetarian eats vegetables, what does a humanitarian eat? In what language do people recite at a play and play at a recital? Ship by truck and send cargo by ship? Have noses that run and feet that smell? Park in a driveway and drive on a parkway?
How can a slim chance and a fat chance be the same, while a wise man and a wise guy are opposites? You have to marvel at the unique lunacy of a language in which your house can burn up as it burns down, in which you fill in a form by filling it out and in which an alarm goes off by going on.
English was invented by people, not computers, and it reflects the creativity of the human race, which, of course, is not a race at all. That is why, when the stars are out, they are visible, but when the lights are out, they are invisible.

Similar Messages

I would like to be able to edit MP4s in CS5. I can not open the file. What am I missing?

I would like to be able to edit MP4s in CS5. I can not open the file. What am I missing?

According to the publisher For GoSystem Tax, the 32-bit version of Internet Explorer 8, 9, or 10 is required. Which means it can't be accessed from an iPad. This seems weird. I would recommend you contact the publisher.

Will QuickTime Pro Edit mp4?

I own the Madonna: The Immaculate Collection on DVD. I have converted the VOB file to mp4, but it is 62 minutes long. Every video is included in the one file. I want to break the videos down individually for my iPod. I don't mind spending the $30 to upgrade my QuickTime to pro it it will allow me to do this. If not, does anybosy know another program ($50 or less) that will? I've also read some user reviews on QuickTime. Are there a lot of bugs/issues with Windows XP? Thanks.
Windows XP

Will QuickTime Pro Edit mp4?
Yes, but it may not be the best solution in all work flows. Converting and then clipping into segments is a viable solution that will save the final product as an .mov file even though the movie is still in its original format. Reversing the work flow, however, and clipping the file into segments first is not very accurate owing to the way in which the sequential blocks of audio and video data are stored in the file.
Every video is included in the one file. I want to break the videos down individually for my iPod. I don't mind spending the $30 to upgrade my QuickTime to pro it it will allow me to do this. If not, does anybosy know another program ($50 or less) that will?
A cheaper and perhaps better solution would be to dowload the free Windows version of MPEG Streamclip and use it. Since it employs an MPEG based player/editor window, you can accurately set in and out points for the decrypted VOB and convert the segments directly to individual iPod compatible files. In addition, filters are available to change brightness, contrast, saturation, and/or volume, as well as, custom cropping with improved scaling as part of the conversion process. In some ways, it is also easier to use than QT Pro.
I've also read some user reviews on QuickTime. Are there a lot of bugs/issues with Windows XP?
If you really don't want to use Apple's QT tools, MPEG Streamclip for windows will also use the QT Alternate software instead. I personally don't find QT to be "buggy" to any real degree. Most of my problem have been traced to use of the QT H.264 codec at low video data rates. The "predictor-corrector" routines appear to be written for use at higher data rates (my guess would be in the 2.0 mbps to 5.0 mbps range) and so tend to be slow to "clamp" video data rate excursions in excess of user settings below 1.0-1.5 mbps with certain vintage video content. As I use the Mac version, I'm stuck with QT 7 and simply make adjustments as needed for a 100% conversion success rate for the nearly 400 videos currently on my iPod.

Distorted picture while editing MP4 file in Adobe Premiere CS5

hi,
I am trying to edit an MP4 file in the Adobe Premiere CS5 and having a distorted picture every few seconds.
When I am playing the original file using VLC or Media Player it looks OK.
Untill now I didn't have problems with editing MP4 files.
Did anybody had similar problem (and a solution )?
I am adding the file info captured by MediaInfo:
General
Complete name                    : E:\tami\video\M4H04540.MP4
Format                           : MPEG-4
Format profile                   : Sony PSP
Codec ID                         : MSNV
File size                        : 17.5 MiB
Duration                         : 16s 16ms
Overall bit rate                 : 9 189 Kbps
Encoded date                     : UTC 2011-07-01 07:14:25
Tagged date                      : UTC 2011-07-01 07:14:40
Video
ID                               : 1
Format                           : MPEG-4 Visual
Format profile                   : Advanced Coding Efficiency@L4
Format settings, BVOP            : Yes
Format settings, QPel            : No
Format settings, GMC             : No warppoints
Format settings, Matrix          : Default (H.263)
Codec ID                         : 20
Duration                         : 16s 16ms
Bit rate mode                    : Variable
Bit rate                         : 9 000 Kbps
Maximum bit rate                 : 14.0 Mbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate mode                  : Constant
Frame rate                       : 29.970 fps
Color space                      : YUV
Bit depth                        : 8 bits
Scan type                        : Progressive
Compression mode                 : Lossy
Bits/(Pixel*Frame)               : 0.326
Stream size                      : 17.4 MiB (99%)
Encoded date                     : UTC 2011-07-01 07:14:25
Tagged date                      : UTC 2011-07-01 07:14:40
Audio
ID                               : 2
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format profile                   : LC
Codec ID                         : 40
Duration                         : 16s 0ms
Bit rate mode                    : Constant
Bit rate                         : 64.0 Kbps
Channel(s)                       : 1 channel
Channel positions                : Front: C
Sampling rate                    : 24.0 KHz
Compression mode                 : Lossy
Stream size                      : 125 KiB (1%)
Encoded date                     : UTC 2011-07-01 07:14:25
Tagged date                      : UTC 2011-07-01 07:14:40
Thanks,
Miki

Not a problem; not scolding, just suggesting that users there might be of more help, since CS5/CS5.5 is a whole different animal than CS4.
I suspect that, if setting playback to full resolution didn't help, there's not much you can do with these files as they are. You'll have to convert them to something else. Does the break up appear when you step through the video frame by frame? If not, you could use AME to convert these to something else, which will then let you edit a little more effectively in Premiere Pro.
EDIT: Sorry, missed that you said that exporting retained the blobs. In light of that, you'll have to look at a third-party converter to flip these. MPEG Streamclip for Windows might work.

Editing MP4 files in CS6 then importing into Premiere Elements 13

I would like to import MP4 files from a Phantom Drone into Photoshop CS6 ---Edit those files--Then rather then making the movie in CS6 --import into Premiere Elements 13 to edit and render ..Is it possible to use both program's to enhance the final movie? Thanks Tom

Tom
Add On..
On what computer operating system is your Premiere Elements 13 running?
If your Photoshop CS6 comes with Bridge, I am wondering if there is a way to go from
CS6 Bridge to Elements Organizer 13. From Elements Organizer 13, you could import from there
into the Premiere Elements 13 Editor.
Quick results...
Photoshop CS5.1 Extended, File Menu/Export/Render Video
File Menu/Browse in Bridge
Right click .mp4 export in Bridge, select Open With, select Adobe Premiere Elements 13 which needs to be set as default.
Seems 13 is opening but without the .mp4.
More later.
ATR

Cannot edit MP4 files, maybe compression error?

Hi, I'm new to Final Cut Express. I just bought it to replace iMovie. But I'm having a issue - only had it open for not even a hour and I started getting a "General Error", specifically "Out of Memory". It was a mp4 clip, like this:
MPEG-4 MOVIE
1280x720
H.264, MPEG 4 HIGH EFFICIENCY AAC
2 (Audio Channels)
3,127 (Bit rate)
45.5 MB
I browsed the forums for a bit, trying to figure out what I could do to make the errors go away. I've never had problems with compression or anything like this before. I saw somewhere that I should use MPEG Streamclip to convert the clip to .mov using Apple Intermediate, but MPEG couldn't edit the file either, although it played it fine. I tried going in and trying to export to .mov via Quicktime, but it only exported a completely white video with normal audio. I have no idea what to do now.
Why is this happening, how do I fix or prevent it from happening??
Message was edited by: BreatheHorror

I think you missed me a little here... from MPEG Streamclip, I took the original dimensions and tried to convert it to quicktime with the following settings:
APPLE INTERMEDIATE CODEC
QUALITY 100%
UNCOMPRESSED SOUND
1280x720 UNSCALED
FRAMERATE 29.97
When I try to convert like this, using any of the clips (the clip I had originally talked about was one out of a batch of twenty, I tested them all last night after posting a realized they all get the same error) I get a empty, 0kb file and a Error that says it can't prepare the movie.
FCE won't even open the video at all. I can import it, but when I try to open it with the viewer it doesn't open, it simply spits out a general memory error. It's my Quicktime that does the white screen every time I try and convert the movie through it.
I will however, try to change the setup of my FCE Sequence... when trying to use this clips I was using HDV-APPLE INTERMEDIATE CODEC 1080i50. I was using it because I need the 1080p (this is for Youtube) and it was the only easy setup that was the size I needed. I'm a noob, I don't have any idea on how to change the size of the video (just any easy setup gives me the old square video, so if I try to change it when rendering the clips would be all placed weird with possible gaps).

Editing .MP4 video from a N8 on a PC

Hello,
I'm looking for a PC software wich suport the N8 video filles. THX.
When i try to import the movies made with my N8 in Adobe première pro, it's not working.
I've tried with Adobe Premiere Pro and Windows movie maker...
Aparently the Nokia .MP4 files are not in a contener or in a codec Adobe Première pro can open.
I'v been trying, i mean alot, to convert the .MP4 in .mov .avi .wmv.
And in different codec also xvid dv etc.
but they still wont open.
So my question is :
Do someone know an editing software for PC which can directly open movies filles from a Nokia ?
Thx.

How would video correlate with size constraints of SMS?
Happy to have helped forum with a Support Ratio = 42.5

Editing .MP4 vidéo from a N8

Hello,
When i try to import the movies made with my N8 in Adobe première pro, it's not working.
Aparently the Nokia .MP4 files are not in a contener or in a codec Adobe Première pro can open.
I'v been trying, i mean alot, to convert the .MP4 in .mov .avi .wmv in different codec also xvid dv etc.
but they still wont open.
So my question is :
Do someone know an editing software for PC which can open movies from a Nokia ?
Thx.

I would imagine that you could convert the files with MPEG Streamclip or Compressor, both will convert to Pro Res.
DM

Best settings for editing MP4 videos in Pre9?

Hello!
I have some MP4 video's that I wish to edit.
When I edit them and try and save them, I am struggling to find the best settings to use.
If I try making them Pal DVD widescreen the motion is very jerky.
If I use H264 wide screen the file is enormous.
For example the mp4 is 1Gb, when edited and saved as H264 the file is 18.4Gb.
Any one have any suggestions?
Cheers.

i im shooting weddings but im quite new at more frame rates i used to shot in dv 29.97 but now i have this cam and looking for a Canon XF300 so i need to learn more about frame rates and that

Editing .MP4 in Premiere 2014 CC out of sync - XA25 clips

Hi there,
Constant problem I am having, I record in .MP4 in XA25 of someone speaking to camera wearing a Sanken COS-11D lavalier microphone. I then transfer the file to my computer and import the file into Premiere and the voice doesn't match with the video. Seems a few frames out. I suppose I can adjust the audio layer to match the video, but that won't work for a long term solution. Any suggestions?
thanks!

Hi Kevin,
I don't see anywhere in the user manual that says it is variable...
Here are my settings for recording with the XA25
MP4 - 25p @ 24Mbps
I am going to try it in AVCHD and see if I get the same issues,
Maybe I need to pick a codec that matches better for editing?
cheers
Dan

How should I start my project for editing MP4 in Premiere E9

Hello,
I am new to the forums and to video/picture editing in general. The main disconnect I have is with all the different formats and such.
Long story short. I have Premiere elements 9. Im using a Flip Ultra HD (to my understanding it produces MP4).
I was wondering if someone could point me in the direction of the most accurate way to start my project in Premiere elements 9.
Thank you very much in advance to anyone who may be able to help.
-Jeff

You should select the Settings for a Flip Mino/Ultra HD project, then use Get Media to get the files from your camcorder into your computer.
You can see how to set up a project and get media in the first couple of tutorials in my free 8-part Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

Editing Mp4 in Cs5

Hi,
I have an Mp4 (that I had shot before with a Canon GL2 and edited it to a MP4) now I am trying to RE edit it, but whenever I export it, it is jittery. I am wondering what my source settings should be? (import) Should I set the settings for MP4 or the original footage?) And when I export should I still export to H.264? (since that is what it already was?)
And a second question is does Premiere Pro cs5 have a program like Live Type that has preset text with motion?
Thanks so much in advance, I appreciate ANY advice, I am tired of banging my head against the desk!
ruez2bu2

I would guess that the mp4 is a progressive video file and you have used a DV preset to re-edit.
As you are editing an mp4 file you need to initially use a sequence with settings that match the file.
To use a mp4 compatible sequence drag your file from the media window onto the new icon at the bottom of the window.
Then when you export make sure that you match the pixels 720x480 or 576 ( depends where you are)
col

Newbie Q re editing .mp4

I have an oral history in an .mp4 file. It's about 30 minutes long, and I need to do two things. First, I need to divide it up into 2 or 3 shorter files. Second, I need to delete a few minutes of off-topic chatter.
I assume GarageBand can do these things, but I've never used it before and when I opened it, I got kind overwhelmed.
Is GarageBand the easiest thing to use to do this? If so, can someone point me toward instructions that can be followed by the technically-challenged?
Or is there some other, easier, way to do what I want?

I need to divide it up into 2 or 3 shorter files.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)
I need to delete a few minutes of off-topic chatter.
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
Is GarageBand the easiest thing to use to do this? I
i'd choose an audio editor:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)
but GB will work fine

Why can't I edit mp4s in iMovie?

I had trouble importing mp4s to iMovie from my Sony Bloggie, so I copied them to my desktop, then imported them to iMovie. They won't play in the viewer from the Event or Project Libraries -- they play audio only. I'm using iMovie version '08. What's going on?

Hey There Pippi10,
I understand you want to crop a video clip, but are not seeing the option to do that. From the image above, it looks like you created a project, but you didn't double click to open the project. With the project open, you would be able to drag the selected clip above into the timeline and crop it.
Below are a few resources for iMovie which will explain this a little more:
iMovie (2013): Create a new movie
https://support.apple.com/kb/PH14687?locale=en_US
iMovie (2013): Add clips
https://support.apple.com/kb/PH14694?locale=en_US
iMovie (2013): Crop a clip
https://support.apple.com/kb/PH14715?locale=en_US&viewlocale=en_US
Have a great weekend!
- Judy

How to edit MP4 movies?

How to join two or more qucktime movies?

hey, traderart,
see if this can work：http://www.ehow.com/how_6944202_join-movies-quicktime.html
or as i know, video converters can do this job well. if you want, you can try this video converter mac .
to use a video converter to join movies, you need only import->merge->output.
good luck.

Edit mp4

Similar Messages

Maybe you are looking for