Edit MSS 60.1 iView

Hi,
EP: 6.0 SP14
SAP: 4.70 X200
MSS : 60.1
I need to make a couple of changes to the standard worksets. NWDI is not configured. So can I simply install NWDS and make the required changes to these iViews by importing the PAR files and adjusting them, or is there something else to be done? I have read something about using Content Mirroring here but not sure if I need to use it before updating the source files. Any suggestions are welcome.
Thanks and regards
Message was edited by:
        Shehryar Khan
Message was edited by:
        Shehryar Khan
Message was edited by:
        Shehryar Khan

Hi,
Thanks for the reply. Can you please highlight why I'd need PDK? I have seen quite a few posts on this forum but none have mentioned about PDK so far. The procedure mentioned so far is to simply download the PAR file from Portal, Import into NWDS, adjust the application, and upload back into portal. Please correct me if I am wrong. What is PDK giving??? Wouldnt the application compile without it? Is there anything else to consider such as deployment descriptors???
Regards

Similar Messages

  • MSS Start Process iView

    Hi,
        Can we skip the first step "Employee Selection" and move directly to the "Process Selection" in the "Start Process" iview with MSS 1.0.
    If this can be done, Can you please let me know how to skip the Employee selection step.
    Thanks,
    Anand
    Edited by: Kirupanand Venkatapathi on Jun 30, 2009 9:24 AM

    Hi Siddharth,
                       Nice to see your reply, i went to the table V_T5ASRPROCVALID but i haven't seen any of the below process 
    Change Employee Group and Subgroup
    Change Personnel Area and Subarea
    Request for Internal Transfer (Enhanced)
    Request for Promotion
    Request for Internal Transfer
    Request for Separation
    Request for Special Payment
    Request for Transfer
    Change of Working Time
    in that table, i want to remove the above process from MSS Start Process iView and you mention feature for this, if you have any idea about that feature please let me know.
    Really i appreciate.
    Thanks and Regards,
    Abhiram.

  • Cuatomizing MSS Team Calendar iView on the Portal

    We have installed the ESS And MSS Business package.  But we are unable to access the MSS Team Calendar.
    The error message is:
    No views found: Missing customizing.
    Please advice.  Is there a how to guide?

    Hi Amr Azim
    Please check the below threads for similar issues :
    Team Calendar in MSS: No Views found: Missing customizing
    MSS Team calendar error - No Views found,  Missing Customizing
    For accessing MSS Team calendar iview in the sap portal, you need to check the IGS configurations
    [Internet Graphics Server (IGS) Administration |http://help.sap.com/saphelp_nwpi711/helpdata/en/48/bbe36cd880307ce10000000a42189b/content.htm] , SAP Note 704604, 946153, 1294238.
    Hope it will helps
    Regards
    Arun Jaiswal

  • Edit the 'New Task' iView

    Hello!
    I want to know if there's a way to edit the 'New Task' iView from the Universal Worklist iview (com.sap.netweaver.bc.uwl.ui.UWL).
    I want to put a specific USER in the field 'Assigned to' and make it fixed, where the user could not change it.
    Is it possible ? how can it be done ?
    Thanks in advance,
    Alessandro

    Hello Alessandro,
    New UWL Task iView is based on an WebDynpro application. There are two ways to accomplish your task:
    1) Write your own, completely new, application
    2) Use and modify existing standard one.
    No doubt, second approach is easier.
    You are interested in application
    tckmcbc.uwl.ui~wd_ui/UWL
    (WD Project : tckmcbc.uwl.ui~wd_ui ; Application : UWL)
    Workaround is following:
    1) download this app. from WEB AS
    2) import it into your NWDS, the sources are built in
    3) Modify UWL application (component)
    4) ... the most challenging point, depends on the access point you want to use your modified app. at.
    When deploying, you usually upload your application to "local" namespace. In this case, u have to modify the link of the command (button) that starts the wizard, to point it to your locally deployed app.
    Or you can (manually) modify the MANIFEST.MF and SAP-MANIFEST.MF files in result package (ear for WD), to change the "local" key-vendor and key-location values to [sap.com]. Then your application will replace standard one and will be used as default (no need to customize noth.).
    For example, we had a request to add "New UWL Task" button to Meeting detail iView (Collabotration). Another request was: automatically set the meeting Subject to UWL task name.  To do so, we had do decompile standard MeetingOverview functionality and ad another button "Create Task" to meeting detail page. Then this button was linked to our custom application. If you are interested, i could send you that WD UWL project, we've have prepared (to avoid steps 1-2).
    mz

  • Edit MSS compansation planning (ECM)-IVew

    Hi
    I am having one requirement i need to edit MSS compansation planning (ECM)
    IVews , this might be standard package and i am added software component(SE)
    to NWDI. and i created one track
    after loging to NWDS i can see only software components i did't see any imported packages to modify respective IVew.
    is it nessary to do checkin? please let me know the process to modify the existing IVew.
    Quick response highly appriciated
    Best Regards
    Alleiah

    Hi there,
    You have to import the MSS package at the NWDI, create a track and make the changes.
    Is it clear?
    Regards,
    Luciano

  • Changing Layout and RFC used in MSS Attendance Overview iview

    Hi There,
    We are using HTMLB based MSS iviews and need to change layout and information on Attendance overview screen. We got required PAR file and i can create a project based on this PAR as well.
    Now i see so many errors due to missing import, even com.sapportals.html* based import statements are indicated as error..
    If i have missed out something during import of this par file, how can i correct it now.
    Thanks a lot for your suggestions.
    Rgds

    thansk Prakash,
    Finally directed them to server files.. and it did the job )
    Rgds
    Edited by: Sudhir on Oct 13, 2008 10:17 AM

  • MSS - Compensation Profile iViews Error Messages (Parameter CREVI not set)

    Hello Folks,
    We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
    I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
    General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
    Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
    Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
    Thanks much for your help!
    Thanks,
    NVR.

    Enter in the iview PCD portal content :
    iView Compensation Planning - edit iview - in propertes search for the field Compensation Review (CREV) it's optional and fey from SAP Table T71ADM08
    Edited by: Javier Ignacio Serrano Zamorano on May 5, 2010 10:20 PM

  • MSS General Data iView

    Hi To all,
    I'm implementing MSS 60.1.5 <b>(No WebDynpro)</b>
    I have a problem with GeneraData iView
    (com.sap.pct.hcm.eeprofilegeneraldata.default)
    It's a JSP and it utilize the RFC HRWPC_RFC_EP_READ_GENERALDATA
    The problem is that the iView do not show in a correct way the data. I.E. next to Employee SubArea(description) show the office adress, or next to salary class(description) show the value of the Employee status.
    Someone know how can I reorganize the view?
    Thanks in advance
    Dom

    Hi,
            Can you help me regarding MSS iview customization (based on par and not webDynpro).There is one iview General data in which we have to add one new field.For that a new function Module is created in the Backend R/3 by ABAP persons.The New Function module wraps the old function Module + the new Field.Do you know How this filed can be shown in our iview.
    Regards
    Imran

  • MSS/Company property iview empty

    Hello,
    We need to show company property iview from MSS/General Information. We've customized 40 infotype. We choose a user from Employee Search iView, when selecting an employee, the Company Property iView is empty.
    Please, do you know how can I do so as to show data in this iView?
    Thank you

    If the iviews show blank or nothing.... You should check the permissions of the iviews or page, and see with the user,. give permissions to the rol as read permission and end user permissions.
    This could be....
    Hope its help
    Bye

  • MSS Status overview iview Objective Settings & appraisals

    Hi All,
    Currently the status overview Iview of MSS for appraisals display all the employees(in org unit) irrespective of whether the employee/appraisee has existing documents. This is because this Iview also has the functionality of creating the appraisal documents from here.
    In our case we don't create appraisal documents from this Ivew, so we hide the "In Preparation".
    Now the question is we want to filter the employees and display only those who has appraisal documents already created. How could we achive this?
    All we need is: We wanted to give an view to higher level manager with all the employees who has apprisal documents in completed status and he need to just approve/reject. Is there any other way we can achive this with out using the Status Overview Iview. I am not able to locate any bsp which serves this purpose from HAP_DOCUMENT.
    Please adive me, how can I achive this.
    Apprciate your inputs and any kind of help.
    Thank You,
    Hari.

    Hi, Check HAP_CALIBRATION / search.htm and result.htm you can enhance his behavior modifying filtering,
    Best Regards.-

  • MSS Organizational Assignment iView not displaying

    Hi,
    I'm using the MSS business package.
    When navigating to Team - Employee Info - General Info, selecting an employee and clicking on the organizational assignment hyperlink, nothing happens. The Org Assignment iview does not popup.
    However if I go into the other links under Team - Employee Info such as Personnel Development, and choose the same employee, the organizational assignment iview does start correctly.
    I'm not sure where the problem lies here or what config controls this behaviour.
    Any advise please.
    Regards
    Mr.T

    Hey Mr. T,
      First off, great name.
      Secondly, and to address your issue, can you say whether or not you've attempted to move (copy/paste) any of the XSS content from the default location in the PCD to another location? Any content that might use OBN and/or relative paths to call secondary content items will NOT work properly if you start moving content around in the PCD. That's not to say it can't be done, but additional steps must be taken after you've moved this content. Please comment on the current location of your content in the PCD... was it moved at all?
      Additionally, it may prove useful to captur an HTTP trace during the 'failure scenario' because you can often derive the target PCD location from the entries in that trace. HTTP Watch is a free tool that works well. There are others too, just Google-search for one. If possible, paste the last dozen or so lines of the trace into a reply here and we can try to see what exactly is being called and, hopefully, tell you why it's not rendering.
    -Kevin

  • How to find out OrgUnit from the MSS team viewer iview

    Hi Experts,
    Please refer following link:
    https://wiki.sdn.sap.com/wiki/display/profile/HowtoreadinformationfromtheteamviewerinWeb+Dynpro
    Using this link, I am able to find out the perno.
    I have to find out OrgUnit of selected person. I did the mapping. I have also written following code:
    String orgunit = wdContext.currentSelectedOrgUnitElement().getObjid();
    wdComponentAPI.getMessageManager().reportSuccess("You have selected orgunit "+ orgunit);
    However, orgunit value is always null
    Can you please let me know how we can get the orgunit in this case?
    Regards,
    Gary

    Hi Gabriel,
    Requirement 1
    Thanks. I did so. Using this I can see the OrgUnit. However, this is the OrgUnit of MSS user. It remains same through out the program. It is unlike pernr which changes as the user clicks on different Employees.
    My exact requirement is as below:
    User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Structure". Here organization structure will be displayed. Now the user will expand Org Structure. I want to know the Org Unit of different Organization as the user will go on expanding the Org Structure using the buttons
    Requirement 2
    User will click on Employee Selection drop down box. After that he will select "Employees from Organizational Unit". Now we can see the Go button. I have to write some code on the button. Where I can find the code for the button. I spent lot of time. I am not able to find out the exact place where the view for the button is located.
    Please help.
    Regards,
    Gary

  • MSS Phone List iView (MSS 60.1.5 Java Version)

    Hi,
    I have downloaded the Phone List iView from deployment on portal. When i open that par file with Netweaver Developer Studio it doesnt have any source code in it. Can anybody tell me how to modify it?? Am i doing right thing here.???
    Thanks

    >> want to change the length of Phone Number field. How do i do that?
    You will have to change the Infoset /SAPQUERY/HR_ADM. The Telephone Number field is p0006-TELNR. As this is a std field, you may not be able to change the length. you should probably put in an additional field with  the reqd legth, in the Infoset & add code for that field to display the Tel No. Remove the P0006-TELNR form the Infoset Selections.
    >>>How would i know if one iView is a transaction on backend( and what is the transaction?
    You can see it in the iView Properties (Type/transaction etc) under Content Admin in the Portal.
    Regards,
    Suresh Datti

  • MSS Personal data iview

    HI Experts,
    I have to add phone field in personal data iview.
    I am using EP7.0 Portal ,and this is a webdynrpo based iview,I wanted to know whether there is any hidden field for phone or we need to add this field or is there any configuration required from backend.
    Thanks in advance.
    Thanks,
    Vinay

    Hi,
    If this field already manitained at r3 side, you need to get that field from R3 as same what the other fileds you are getting. Nothing is required for this only thing you have to Map this field and you have to bind this field to your view.

  • Webdynpro Application Name for MSS/Employee Search Iview

    Hi all,
    I want to modify <b>MSS/EmployeeSearch</b> application. I am not able to find out the technical name(WebDnypro Application name) for this <b>MSS/employee search</b> I view. I know we can find  it out from pcd I view properties, but in this case its different from PCD.
    Regards
    Praveen

    I solved it my self

Maybe you are looking for