Edit objects from package ztms in local request

Hi ,
I am checking Inconsistancy check for a Transport Request, it showing error as , " Edit objects from package ztms in local request.". can anyone please help me in resolving this error.
regards,
Govind Nagotla

Hi,
the reason may be, that development class ZTMS has an invalid or unknown transport layer in table TDEVC (look at field PDEVCLASS), or the whole class is unknown in your system, if the object comes from a foreign home system!
Regards,
Klaus

Similar Messages

Error : Only edit objects from package ZSD in local requests

Hi Experts,
We are modifying all Z-programs to unicode enabled programs in ECC6.0 Upgradation. While doing this we are not able to save it as a transportable request. It displays error as "Only edit objects from package ZSD in local requests".
So can anyone tell me how to save it as a transportable request.
Thanks,
Ranjith C.

Hi,
two ways:
1. change the transport type: create transport type copy in se01 and copy all mentioned objects to that transport
2. better way: correct development class and transport layer
case a. target system was not definied (not known to TMS) or is empty
case b. source system (original system for objects) not known to TMS
case c. objects assigned to local package (former local development class)
etc.
If you don't understand this explanation, just use one of Z transport layers showed in stms, by changing the transport layer in the definition of the package (se80) to shown in STMS (link name from source to targed system)
Kind regards,
Mirek

Only edit objects from package ZPACKAGE in local requests

Hi Experts,
I was adding a secondary index to a Ztable present in a package ZPACKAGE. When I tried to save in a workbench request, I got the error message "You cannot use request XXXXXX". I then created a local change request where the target system is not mentioned in the transport request. I was able to save the index and later I mentioned the target system. When I tried to release the transport request, I get the message "Only edit objects from package ZPACKAGE in local requests". Kindly suggest what can I do save the changes in a transport request and release it.
Thanks

Check out the transport layer and target system for that transport layer. As someone suggested, talk to your basis.
This is most common when you have the actual table in temp folder but the index stored in Zpackage.
I would first check my objects package to make sure that they are in right package. If everything @ right place, then i will check the package transport layer and software component then check the 'use access' of the package. if the package is good then check the transport path and target systems for each transport later.

Transport error: "Only edit objects from package CL in local requests"

I have made changes to an SAP original program as per Note 1096366 on SAP's service web site. The program is an Include program (LCLCMFMZ). I have assigned it a transport number, but it keeps trying to make the target local. When I change the target to DEV, it will not transport and I get the following error:
"Only edit objects from package CL in local requests"
Does anyone know what this error means?
Thanks.

Thanks Nick,
but I think I have figured it out. I needed to create a transport of copies (from se09) and include this object in that transport (right click and choose 'Include object...'). Then back to se01 and display all transportable object (including transport of copies). Then select my transport of copies, choose a target system (from double clicking and going to properties). Only then would it let this object get transported.

Error "Only edit objects from package /VIRSA/ZVIR in local requests"

Hey, SAP gurus,
After I applied OSS note 1149445 in our Dev box to fix the bug in program /VIRSA/ZVFAT, I had problem to realease the transport. I got the error u201COnly edit objects from package /VIRSA/ZVIR in local requestsu201D.
u201CObjects in package /VIRSA/ZVIR cannot be edited in transportable Workbench requests in the current Dev system. The transport routes are configured such that objects from package /VIRSA/ZVIR can only be edited in local Workbench requests.u201D
What can I do to release the transport and move it to our QA box?
Thanks in advance!
Fisher Li

My co-worker and I followed SAP instruction on this one and solve the issue.
We created a "transport of copies" by using Transaction SE01. Go to the request overview and choose Request/task -> Object list -> Include objects to include the "child transport number of my transport" in this "transport of copies". Add the target system and release the change request.
Thanks!
Fisher Li

Only edit objects from package in local requests

Hello Experts,
could you help me please
a user has tried to transport a local request, I modified it by putting the target system, but when the user wants to release it, he gets the error massage "Only edit objects from package in local requests "
Thanks a lot

HI
Follow the steps.
1. Create a new transport request
2. Select include objetcts
3. Object list from request and select your tranport request
4. Release the Transport request and transport.
If don't work try this other case:
1. Run tcode SE01
2. Create a new "Transport of copies"
3. Into the request, choose menu "request/task -> object list -> include objects
4. Include your transport request
5. Add the target system and release the request.
If you get any error put here
Regards
William Neira

Display ERP object from business context of service request

Hi Experts,
I have a requirement to display a custom business object in ERP from the business context tab of the service request. The custom business object is added as a link to the service request. The display of standard BOR object works fine, but for the custom business object, when the user clicks on the link nothing happens.
I am using CRM 7.1 (CRM 7.0 with EHP1) and ECC 6.0, no EHPs.
Thanks in advance
Prabhas

If you are using JWSDP 1.3, here is how you can do it. However this is an internal API, specific to Sun's JAX-RPC implementation and may change in the future. Anyway, here is how you do it.
If you service endpoint implements javax.xml.rpc.server.ServiceLifecycle interface, then you can keep a copy of javax.xml.rpc.server.ServletEndpointContext in init() method. In the actual method invocation, you can obtain javax.xml.rpc.handler.MessageContext from the ServletEndpointContext. And then invoke getProperty on the message context to return HttpServletRequest as follows:
HttpServletRequest request =
(HttpServletRequest) messageContext.getProperty(
com
.sun
.xml
.rpc
.server
.http
.MessageContextProperties
.HTTP_SERVLET_REQUEST);
Hope this helps.
-Arun

Transfer object from package $TMP

Hi gurues,
I need trasnfer objects in $TMP package to another new pakage (because I need transport them)
Can someboy explain me (as detailled as possible) how create a new Order Request /Package
and how transfer fromt $TMP to the new ?
Thank you very much!!!

Hi,
If you want to create new Package then go to SE80 T-code and create there.
To create new request go to RAS1-- Transport - select Object type -Select the object which you want to transport-select Transferred selection - before that give grouping and collection mode-there you will have option called Package select that and give your package after that it will ask you to create request.select create and give discretion and select save button.
Transporting : Go to SE09 and transport task first and then transport Request.
Ali.

Ojects from Package cannot be transported

Hello,
When I try and release a transport request, I get the following message.
Objects in package ZXI cannot be edited in transportable Workbench requests in the current system DXA. The transport routes are configured such that objects from package ZXI can only be edited in local Workbench requests.
the configuration of the transport routes must be corrected in the Transport Management System (TMS).
Kindly help me add this package to the transport routes.
Currently the Transport layer in STMS has name ZDXA.
Please advise.
Thanks.

While creating a package you have to specify teh transport layer.

Multiple object is not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"

Can you help someone to get multiple object using "Edit Objects" from "Acrobat X Pro" to "Photoshop CS5"? Refer below:
Selecting the multi object (Acrobat X Pro):
Click Edit Objects => Displays below option, click OK:
Opened only one object instead of above multiple selected - in Photoshop CS5
Thanks in advance,
Pasumalai J

Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai

Getting error while passing implicit request object from JSP to JavaBean

Hi,
I am getting error while passing implicit object ie( request object)
from within JSP to JavaBean.
Following is source for JSP, JavaBean and Error message I am getting.
vaLookup.jsp Source
<jsp:useBean id="db" class="advisorinsight.javabeans.DisplayPages"
scope="request">
<jsp:setProperty name="db" property="request" value="<%= request %>"
/>
</jsp:useBean>
<jsp:getProperty name="db" property="totalrecords" />
JAVABEAN DisplayPages.java source
package javabeans;
import java.io.Serializable;
import javax.servlet.http.HttpServletRequest;
public final class DisplayPages implements Serializable {
private String totalrecords;
private HttpServletRequest request;
public void setRequest(HttpServletRequest req){
this.request = req;
public java.lang.String getTotalrecords()
this.totalrecords =
this.request.getParameter("totalrecords");
return this.totalrecords;
public DisplayPages(){
totalrecords = "";
request = null;
error after executing vaLookup.jsp
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service JavaExtData successfully loaded
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service LockManager successfully loaded
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service RLOPManager successfully loaded
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:7] info: ENGINE-ready: ready: 10819
[30/Nov/2001 11:56:46:0] info: --------------------------------------
[30/Nov/2001 11:56:46:0] info: JSPRunnerSticky: init
[30/Nov/2001 11:56:46:0] info: --------------------------------------
[30/Nov/2001 11:56:51:7] error: Exception: SERVLET-compile_failed:
Failed in compiling template: /va/valookup.jsp, javac error:
c:\iplanet\ias6\ias\APPS\variabl
S\va\valookup.java:76: Undefined variable: JSP_8
db.setRequest(_JSP__8);
^
1 error
Exception Stack Trace:
java.lang.Exception: javac error:
c:\iplanet\ias6\ias\APPS\variableannuity\va\WEB-INF\compiled_jsp\jsp\APPS\va\valookup.java:76:
Undefined variable: JSP_8
db.setRequest(_JSP__8);
^
1 error
at
com.netscape.server.servlet.jsp.JSPCompiler.compileJSP(Unknown Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileOrLoadJSP(Unknown
Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileInstance(Unknown
Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileInstance(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callJspCompiler(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callUri(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callUriRestrictOutput(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformRequestDispatcher.forward(Unknown
Source)
at com.netscape.server.servlet.jsp.JSPRunner.service(Unknown
Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown
Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)

The only thing that I see that looks funny to me is when you pass the request object into the method using <%=request%>, Im not sure whats going to happen here because that is suppose to print the results. Have you tried simply using <%request%>?

Retrieve version of object from transport request

hi,
I deleted my report program from a modifiable workbench transport request.
Now I want to retreive the version of program associated with this transport.
Can I do that ? (this version is not available in version mgmt of the report)
thanks in advance
B

Since this is a continuation of your earlier post:
retrieve the version of object
Please assign poin ts to that one and mark it as closed. Then I will unlock this one.
Other thread closed and this one re-opened.
Rob
Edited by: Rob Burbank on Mar 31, 2009 1:46 PM

Release object from transport request

HI
I want to take off two objects from my transport request.
How is it possible without releasing all the exisiting objects from the request.
Regards,
Tapish

Hi Tapish,
You can go in any of the following ways
1)Goto SE01 and give your transport request number.
   goto your task and click on edit button. you will get the list of all objects in a table.
   click on the object that needs to be deleted and click on the delete button.
2)Goto se03 and give your request number to unlock all the objects.
    click on the objects that need to be deleted and click on delete button on top.
    dont forget to lock the objects after deleting the required
The second option will work in your case i guess.
Hope this helps..
Cheers,
Srinath.

Moving object from one client to another using transport requests...

Hi,
If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
Regards,
Rajesh

Hello Rajesh
If the two systems share a common transport directory then you can simply go to transaction STMS, double-click on the import queue (target system), then choose menu Extras -> Other Requests -> Add.
The transport request will be added to the import buffer. Next you can import the request.
If the two systems do not share a common transport directory you can use RFC-enabled function module EPS_FTP_PUT to copy the data and cofile from the source to the target system (check for DIR_TRANS directories using transaction AL11).
Regards
Uwe

How to include objects of a z* package into a single request

Hi Gurus,
The requirement is I need to include all the objects in a z*package into one single request.One way is I find out latest version of each program and include it in request.But there are some 200 objects in the package.Is there any simple way to do it , I mean is there any option wherein I type the package name and all programs get included in the request..........
Helpful answers will be rewarded
Regards,
Raghu.

Please try this ..
Goto SE09 ..
Create a transport request ...
Delete the sub-task ..
Now place cursor on main task(request)
click on Include objects(Ctrl+F11)
In the popup check 'Freely selected objects' radio button .. click Ok
Enter the package name ... and any other parameters .. and F8 ..
This will include all the objects in the particular package selected ..
Then release the task ...

Edit objects from package ztms in local request

Similar Messages

Maybe you are looking for