Edit or Change a Change Number in BOM

Good Day
Dear All
Please can anyone can tell me is any process is there to Edit or change the CHANGE NO in BOM

Hi Radhakrishna,
Masters like BOM and Routing can be created and changed with change number. Accordingly changes can be tracked with respect to the change numbers. For Eg BOM created wit hqty 10 with change number X , then BOM changed to 12 with change number Y, then system will display the reports on BOM changes with respect to change numbers. Historial data you can track.
You can create new change number in CC01 with different validity date and make changes to BOM. You cannot edit the change number once its is created.
Have a look on the below doc posted by me on usage of revision level with change numbers.
Usage of Revision Level for PP Masters -BOM and Routing
Thanks & Regards,
Ramagiri

Similar Messages

I am running Itunes 9 on Tiger. Everytime I try to edit my credit card number, it says "session timed out". I need to change the card number in order to purchase music. Also, I lost the last 2 purchases. Can I download them again without a charge?

I am running itunes 9 on Tiger. Everytime I try to edit my credit card number, it says "session timed out". I need to change the card number in order to purchase music. Suggestions?
Also, I lost the last 2 purchases when I backed up after a hard drive crash. Can I download them again without a charge? Newton

Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.

I need to change my phone number on my business card. My card is in a PDF form. How can I change it?

I need to change my phone number on my business card. I am using a Intel IMAC OSX 10.8. My card is in a pdf format.

A JPG won't allow you to actually change the text, but you could blank it out & paste over it I suppose.
Photoshop would only allow you to paste over it, not edit the text I think, but that may be your only option since whoever made it may have restricted editing rights.

How do I change the phone number attached to my Icloud? All the codes and stuff are being sent to my old number.

How do I change the phone number attached to my Icloud? All the codes and stuff are being sent to my old number.

Hello Babyygrl23,
Welcome to the Apple Support Communities!
It sounds like your iCloud Apple ID has a phone number associated with it that you would like to update. If this is the case, after signing in to the linked website below, you will see a section on the left side of the screen labeled Phone Numbers. You can edit the phone number associated with that account from there.
Apple - My Apple ID
Cheers,
Joe

Changing the default number of rows displayed in a interactive report

Hi,
I have a sql query based interactive report but i cant change the default number of pages i.e 15.
is there any way to change the number of rows displayed.
Thank you,
rakesh

Hi,
That was very useful document that you shared, yes that is correct we can so it this way but there is another way doing it where in if you go to the report attribute section and in that there is Layout and Pagination and under
that you can fix the number of rows, and over there we can also accept values from page item such as if the page item value changes the number of rows displayed in the report changes dynamically.
In my report i get only pagination but not a option for layout.
Any help will be appreciated.
And also where i can get the links to the similar document that you have shared ?
TY
rakesh
Edited by: rakesh119 on Apr 30, 2013 12:10 PM

Change of batch number

dear all,
by any chance can i change the batch number once material doc is posted and material is already there in stock with X batch number.
i dont want to cancel the material document.
please advice..
regards,

Hi,
Create the new batch first through MSC1N for material, plant & sloc combination.
Then you can transfer the stock from existing X Batch to new Y Batch through 309 or 311 movement type.
Enter the receiving batch as the new Y batch. & the existing batch as X.
Edited by: Komal Gala on Aug 8, 2008 4:09 PM

In base component when user change the serial number we need to set date time in Extra attribute filed

HI Team,
In ibase component when user change the serial number we need to set date time in Extra attribute filed..if we click edit ,User change serial number after save we need to set date time in Extra Attribute 4 field .
Component - PRDGENSET
In this component there is no attributes,so where we need to implement and how to implement please help.
Thanks
kalpana

Hi Abi,
Thanks for your reply..see i debugged..i have put break point in method SET_S_STRUCT method if press enter in serial number ,debuggeris triggered..in SET_S_STRUCT method value getting serial number..so how to write the logic here...
In GET_S_STRUCT method iam getting all attributes but serial number is not filled..So could you please help here what to do..
in set_S_STRCUT method value iam gettin serial number...in collection wrapper iam geting zrealtions if i open attributes_ref -if i pass Attribute value in run time its getting displayed.so how to write the logic based on serial number please help some coding.
Thanks
kalpana

How to change Text to Number in Excel 2013

Hi,
I imported and parsed a large CSV file (75000 rows) with 4 columns as numbers. They arrive in Excel as text with a "." as decimal separator. In Excel options, I set the decimal separator to "." but data remains as text. I could edit and
enter each cell to convert it as number but I have 4 x 75000 cells...
Any idea ?
Thanks for your help

Hey Wlid1966,
This simple action, I've included some links that explain you step by step:
http://www.extendoffice.com/documents/excel/582-excel-change-text-to-number.html
http://www.extendoffice.com/documents/excel/671-excel-change-number-to-text.html
http://www.accountingweb.com/article/three-ways-convert-text-based-numbers-values/222008
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Extracting changes from Change Master and importing to another BOM

Dear All,
Our client uses ECM and manages two BOM's the Engineering BOM and Production BOM.
The Engineering BOM s are changed through change number. We need to import these changes to the production BOM, (only the changes) through another change number
This means,
We have the Engineering BOM (No plant, usage 2) and Production BOM (Plant BOM with usage 1)with the same structure (BOM header is Z)
Header : Z
Position 1 :A Qty 1
Postion 2 : B Qty 1
Both initially had components A and B, each with Qty 1.
Now with a change number, the Engineering BOM is changed, a new component C is added, the quantity of A is revised to 2.
Now the Engineering BOM is
Header : Z, Plant ( blank) and Usgae 2
Position 1 :A Qty 2
Postion 2 : B Qty 1
Position 3 : C Oty 1
Our requirement is to extract the changes from the Change master, ie, the extract should say BOM header Z is changed,
New position 3 : C Qty 1,
Modified Position 1, Qty 2.
This should have only the changed information and we want to input this to the Production BOM, through another change number to change the Production BOM.
We want this process to be automated, in the sense, user enters the Production BOM header, Plant and usgae 1 and the new change number, then the BOM will be updated with the changes in the engineering BOM.
My Questions are
1- How to get an extract from the Change master with only the changes file, to a txt or xml or any format?
2- Apart from manually updating the Prodcution BOM by seeing the changes from Environment ->Reporting ->BOM changes of the Change master of the Engineering BOM, is there any other way to update the Production BOM only with the changes?
3- Ideally we want to import the changes to the Production BOM rather than deleting the items and again copying from Engineering BOM. What is best practice used in this scenario?
Any suggestions would be helpful
Regards,
Aby Thomas

Dear Mario,
Got ur point.. This is of course possible.. Practicallyboth the BOM's are not exactly identical. Tere is one more BOM apart from the Production BOM.
And there is a need to transfer the changes ( changes alone ) between BOM's.
Further more, there are interface from SAP to other systems, where they alos requires the BOM changes.. So the requirement arises, how to transfer the changes between BOM and also to other systems from SAP.,
If we do not have any interface from legacy PDM, how to extract the changes from the change master?
What is the general practise followed?
Regards,
Aby Thomas

ML81N: How to change the external number to mandatory?

Hi All,
Is it possible to change the External number field in transaction ML81N from optional to mandatory through configuration settings. Please provide me the path if you have any idea.
Edited by: Julius Bussche on Oct 30, 2008 11:12 AM

Hi,
It can be done using t-code SHD0.
here give the transaction name- -ML81N
in the tab transaction variant-----give a name say --yML81N
then press create.....and go to your required screen....
and there in the field External number tick mark the check-box required
save and exit.
then in the tab standard variants activate the transaction variant created.
Regards
Debarshi.

How to change the port number for deployment in JAVA Studio Enterprise 8?

Hi!
Yesterday i downloaded this new sun java studio enterprise and found it mind blowing.
Now i find that all my previous applications which were running on port 8080 can't be run on sun java studio enterprise(sjse) 8.
Can anyone tell me how to change the port number on this software so i won't have to edit all my applications?

http://docs.sun.com/source/819-0080/install.html
In the Admin Configuration page (or at the command line), enter the following:
Admin User Name�Name of the user who administers the server
Password�Admin user�s password to access the Admin Server (8-character minimum)
Admin Port�Administration port number for initial server instance
HTTP Port�Port number to access the default server instance
HTTPS Port�Secure port number to access the default server instance

Change UUT serial Number with Single Pass in Batch model

How do I change the UUT serial Numbers with Single Pass in Batch model ?
I also like to change the UUT report path, so that each UUT saved in it's own directory.
TIA
George Zou
http://webspace.webring.com/people/og/gtoolbox

the path to the UUT report can be configured in the report options.
You can't specify unique path for each UUT in the report options.
Both report path and UUT serial number are stored in the sequence context during execution. So if you want to know where those variables are located (in order to change their values during runtime), you can set a breakboint in your sequence, change to the variabels tab and do a search for the variables (you perharps have to play around a bit with the searchstring though).
I've already find the place where TestStand holds the information. The problem is that there is no proper callback I can override.
I can only change the serial number in my sequence file. But that is too late to include the serail number in the report file name. The serial number inside the report does get changed.
By the way, I can't change the process model. User wants out of box batch model.
Thanks for reply.
George
Message Edited by zou on 06-19-2008 08:40 AM
Message Edited by zou on 06-19-2008 08:43 AM
George Zou
http://webspace.webring.com/people/og/gtoolbox

How can I change the phone number in my iPad

Can someone guide me to change my phone number.

Hi Wandalee123,
Welcome to the Support Communities!
The article below will explain how to edit your Apple ID account, including your phone number:
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on the link below to access your account.
My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address.
I hope this information helps ....
Have a great day!
- Judy

Need to change my mobile number in my facetime for it to work as it has my old number in there how do i change it step by step thanks

need to change my mobile number in my facetime for it to work as it has my old number in there how do i change it step by step thanks

I'm not sure what is going on but try this.
Open a program which allows you to edit text (on Windows I would suggest NotePad but I don't know what to use on MAC) You want a very simple text editor.
Type your username as you want it.
Highlight it and copy it to the clipboard. Go to the log on page and paste in the name from the clipboard.
Maybe that will work.
All I can think of about the first character becoming an upper case character is that it reminds me of some word processing programs - such as Word or Works - which always assume the first word of a sentence will begin with a capital letter and they change it for you.
I don't know why this would be happening in your case, but that is what it reminds me of.
Is there a spelling add-on or plug-in that might be coming into play here?
I assume that you have no problems at work (you say this is happening on your home computer) so I would begin to look at differences between the two as to software installed, browser add-ons and plug-ins, etc.
Maybe someone at the computer department at the school can help you track this down.
Stan

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I have changed the DNS number to 8.8.8.8, I have worked on this for 2 days and still can't find a fix, HELP!!

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Edit or Change a Change Number in BOM

Similar Messages

Maybe you are looking for