Edit payload in SXMB_moni
Hi,
Is anyone did edited the payload in sxmb_moni and restarted the message?
I read in many threads that it is possible to do.....could any one let me know how to do?
regards.
Hi,
In my opinion, that is not possible editing payload in sxmb_moni, u can edit it in RWB.
follow this link [Editing Payload in SXMB_MONI; , they have same question with you, maybe this will help you..
Thx,
Glenn
Similar Messages
-
Editing Payload in SXMB_MONI
Hi All,
Is this possible to edit payload in SXMB_MONI.
I have already the following url which talks about editing payload from RWB - > Message monitoring.
https://www.sdn.sap.com/irj/scn/wiki?path=%3fpath=/display/xi/whole%252bpayload%252bto%252ba%252bxml%252bfield
Actually I am looking into the options of editing payload in SXMB_MONI of ECC.
Thanks in Advance for the help.
Best Regards
AshokHi ,
am trying to edit only asynchronous message, here is the requirement that we have
Our OTC team has escalated a support issue with a call tag
return that could fail as it comes into SAP.
A "call tag" return is the result of a mis-shipment where the customer
either received damaged product or the wrong product. These returns
come in with not only the account but also the invoice number. The
return is referenced to the originating invoice and the credits are
created based on the prices and discounts that are on the invoice. If
the invoice number on the return does not match an invoice for the
account, then the return will fail.
For some reason, the return fails in the ABAP Proxy layer of SAP ECC
with Application errors and does not provide the ability for the
business to repair the data.
Unfortunately, this failure occurs frequently in production today (1-2
a week - as many as 15) and we anticipate that we will continue to see
these failures with SAP. The invoice is being manually keyed at the
returns setup. Sometimes the error is caused by a keying mistake and
sometimes the documentation (call tag, invoice, packing list) is not
legible.
We also know that External Vendor cannot correct and resend the
return. Their process not only creates the return for credit, but
also has to account for all of the inventory that is being sent for
destruction. Their quality steps lock the return down once it has been
sent to client for credit. Their system will not permit the return to
be corrected and resent.
We do, however, need to find a solution for the correction of these
failed returns that allows us to account for the return and create the
proper credit.
Returns (Order To Cash) team require ability to Edit the payload of
Asynchronous ABAP proxy messages in SAP ECC system, which are failed
due to Incorrect data with Message Status as "Application Error -
Manual Restart Possible".
For this the proposed solution is to Edit the Payload via SAP
XI's "Message Editor" in Runtime Work Bench -> Message Monitoring ->
Proxy Runtime of SAP ECC system.
The message editor is configured in SAP XI and ECC system with the
required roles and SAP Correction Notes.
Message Editor is NOT Working for messages with "Application Error -
Manual Restart Possible" status, while it is working as expected for
messages with "System Error - Manual Restart Possible" status.
Below Error Message is seen, while trying to edit the message with
Application Error in SAP ECC,
" Message editor can only be used for executable, asynchronous XI
messages with errors"
This issue in SAP XI's Message Editor needs to be resolved to complete
the testing of proposed solution in Sandbox systems and make a decision
on the solution to be used for this business requirement. -
Response payload in SXMB_MONI is missing
Dear All,
I have a query related to Response payload in SXMB_MONI.
I triggered an IDOC and XI has sucessfully generated files in my Outbound folder .
<b>When I see sxmb_moni , it is showing message successfully processed message . When I click on successful processed message it is not showing me the Response payload-MainDocument(application/xml) in SXMB_MONI.</b>
PLease help me to find out the solution immediately.
Thanks in advance.
Regards
PrabhatHi,
>>>1) I am not able to see "Payload" under Response in SXMB_MONI in Production server SP15.
can you see the payload before CALL adapter service?
>>>>2) In runtime workbench (Production server sp15) when I click on "Message Monitoring" it is showing error 404 not found.
go to TCODE - SICF and test this service
/sap/bc/gui/sap/its/webgui
navigate from it to the TCODE - SXI_monitor
that's how the message payload is displayed in RWB
BTW
>>>My support pack in development server was sp14 and in production it is SP15.
I just hope your test XI server was SP15
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a> -
Dispay RFC sync payload in SXMB_MONI
Hi all,
I hava a synchronous scenario RCF-TO-SOAP (RFC sender is R3 client).
On XI I want that the parameter LOGGING_SYNC is set to 0, but at the same time I want
to see the inbound payload in SXMB_MONI. I want to see it only for this specific scenario.
How to achive this ? (maybe to do some setting or programming on R/3 before making a synch rfc call ?)
Thanx, JanosThanx for the answers, but I wonder if it is possible to set up logging just for one type of messages -
when RFC sync sender is R/3, as it is stated in the link below:
http://help.sap.com/saphelp_nw70/helpdata/EN/d6/49543b1e49bc1fe10000000a114084/content.htm
Set logging in the message header. This means that this message is logged even if logging
is deactivated explicitly in the configuration. The logging information is part of the message
header:
<SAP:Logging>1</SAP:Logging>
Thanx, Janos -
Modify Payload in SXMB_MONI
hi all,
I want to modify the Payload XML at the first point by stopping the Communicaiton Channel and restarting after the change.
What is the correct way to do that.
Thanks,
FSHi,
As said by Aashish, you can't modify the payload in SXMB_MONI. Either you need to run the scenario or sending the message via RWB test tab through Integration Engine.
Ensure that you are sending the message from Integration Engine, not from Adapter engine.
Thanks, -
Is Payload of SXMB_MONI stored in Some table?
hi Experts,
I am looking at table named SXMSPERROR, is it possible to resend the message(not using SXMB_MONI restart option) if there is an entry for any interface in this table.
Is Payload of SXMB_MONI stored in Some table, so that we can get the payload using Message ID?
Please help if possible! Thanks!
MayankHi Experts,
I was going through the blog by michal: /people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages, it says about a report RSXMB_SUPPORT_RESTART by which we can restart successfully processed payloads.
I used this report in POC evnironment, and by this report i am able to resend successfully processed messages as well as Messages with errors.
So can u please help me in understanding advantages/ disadvantages of using these reports:
RSXMB_SUPPORT_RESTART
RSXMB_RESTART_MESSAGES
What will be the difference if i restart failed message using these reports?
Thanks,
Mayank -
Response payload in sxmb_moni
hi ,
in my XML Message in sxmb_moni the response payload is missing.
and this is happening only for one scenario and it is working fine for other interfaces.
can some one help me the structure of XML message is depend on which configuration exactly?
ThanksHi,
Go to RWB->Message Monitoring and check for the messages.
Also test your message Mapping with the help of Live datat from SXMB_MONI.
Is your scenario is Synchronous.
Regards,
Moorthy -
Missing payload in SXMB_MONI
Hi.
Have an interface with one message in to XI(JDBC). I split this message. One to SAP R3 (idoc) and one out to an server through an fileadapter.
In SXMB_MONI I can see the payload (content)for the idoc-message, but there is not an payload for the other file.Only the SOAP Body.Can not see the content, but the file is beeing sendt to the server.
Can somone tell me why ?
PS! We have just upgradet to SP21.Hi,
Follow this BLOG
/people/prasadbabu.nemalikanti3/blog/2006/02/13/configuration-of-a-central-integration-server
Regards
Seshagiri -
How to hide a payload in sxmb_moni and RWB and Adapter engine.
Hi
I need to hide the pay load in sxmb_moni, RWB, Adapter engine. Because payload has some sensite information.
I need to hide the pay load for perticuler interface Name (http://filetoidoc.com) only. not all payloads.
Please help us this.
advanced thanks
SatiOfcourse you can:)
below are the fields mentioned in blogs
We can also tell exactly which interface/service/namespace can be used:
SXMBPARTY= Communication Party
SXMBPRTAG= Issuing Agency
SXMBPRTTYP= Identification Scheme
SXMBSERV= Service
SXMBIFNS = Interface Namespace
In your case you will use the last one SXMBIFNS
Thanx
Aamir -
MISSING OF BODY IN PAYLOAD UNDER SXMB_MONI
HI ALL.
here iam doing file to file scenario.
my data structure is
DT_lccTolcc3
accdetails
header
keyfield
docdate
siteid
body
accno
keyfield
amount
trailer
keyfield
totalrec
totmat
and my fcc parameters
header,1,detailed,*,trailer,1
header.fieldNames keyfield,docdate,siteid
header.keyFieldValue HEADER
header.keyFieldName keyfield
detailed.fieldNames accno,keyfield,amount
detailed.keyFieldName keyfield
detailed.keyFieldValue |
detailed.fieldSeparator |
trailer.fieldNames keyfield,totalrec,totalamt
trailer.fieldSeparator |
trailer.keyFieldName keyfield
but while executing and testing in sxmb_moni its showing the message like sucess but there was no body in payload.
so what r the changes do i need to configure.
WAITING FOR YOUR GREAT ANSWER.
BYE
regards.
seeta ram.Hi Seetaram,
>>detailed.fieldNames accno,keyfield,amount
>>detailed.keyFieldName keyfield
>>detailed.keyFieldValue |
>>detailed.fieldSeparator |
Since u have given the detailed fieldSeperator as |
the fields will be filled with the value
accno = 5000000303
keyfield = 220.05
amount = 'blank'
for the input 5000000303|220.05.
u have specified the keyField value as | and the actual value in the payload will be 220.05.. this is the reason why u dont get the body in the payload.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution -
Hi All,
We are on SP16, and are not in a position to upgrade to SP19 right now.
Is there any way editing the payload inside XI is possible with SP16?
Regards,
Puloma.hi,
>>>>Do you think it is advisable in a Production scenario?
I expected that (PRD)... that's why I said it was not possible..
you my blog only on DEV for PRD you should model the flows
in such a way that <b>NO PAYLOAD</b> editing should be possible
send the message once more from the sender - that's how it should
work in case of error
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
No Payload in sxmb_moni call adapter
I did soap to soap asynchronous scenario....
my requirement is to send one systems soap request as it is to other systems soap response...
i.e., sending soap message asynchronously...
its often saying that queue is stopped... i am deleting that queue and manually checking for message tracing.....
upto technical routing my payload is there, there is no payload in call adapter...
i checked in adapter monitoring, message monitoring and sxi_cache.. there is no error atall...
Please guide me in resolving this problem...
Regrads,
Pushparaju.BHi,
<i>my requirement is to send one systems soap request as it is to other systems soap response...</i>
Your reqirement is not very clear. Could you please elaborate?
Is it that you want to send a soap request, and donot expect any response back?
Have you called an mapping in your interface determination?
If so, maybe the mapping is not successful and hence you are not able to see the message after technical routing.
I suggest that you check the mapping in the repository, with the payload that you are using as the request.
Regards,
Smitha. -
Edit Payload XML Tag after mapping in cleanUp?
Hello experts,
I've created a 1:N multi mapping with the graphical mapping and now the receiver system has a problem with a string within a tag in the payload which should be renamed from "request1" to "request".
I think I need something like
payload.replaceAll("request1","request");
but I don't know if this is possible in the cleanUp section of the graphical mapping.
As I have to use plain html adapter I can't use any adapter modules.
Best Regards,
RichardHi Stefan!
You could use a Java mapping after the graphical mapping to replace the node names.
How can this be done (doing a Java mapping after graphical mapping)?
I read about a similar problem here where namespaces were removed:
[delete namespace and prefix with Seeburger X.400 receiver;
Would it be possible to do use two different mappings instead of of a multimapping?
I guess this would be the easiest way but as it's not clear up to now if the sending system will provide a file interface or a http call (both systems - sender, receiver - are no SAP Systems). If it'll be a file this file could easy be read a second time but if it's provided via http this will not be possible (as far as I know ..).
BR,
Richard -
Extract Payload from sxmb_moni
Hi Experts
The scenario is: XI pushes data into BI using ABAP proxy adapter. successfully passed data is seen in PSA. the uniquie key in data is journal ID.
Requirement: i have to read the journal id in runtime when data passes through adapter, and create a file, with fields Journal ID, and success/failure... depending on whether it passes through the adapter successfully or not.
In table SXMSPMAST, i get the status, but how can I read the payload? i am sure the payload for failed records are stored in some SAP internal table, but can someone tell me which table?
This is very urgent.. and suitable reward points will be awarded to any help on this.
Thanks in advance,
Sushmita.Data can be seen in tables SXMSCLUP, SXMSPCLUR
-
Payload is not visible in sxmb_moni
Hi friends,
when i send payload from RWB, i am getting success in RWB but when i see that payload in sxmb_moni, i could not see my payload in main document ..only in attachment i could see that paylad.
could you give some idea what could be cause for that?
thanks
rajaHi,
That link is not much useful to me (I mean all the settings for fine in sxmb_adm..that i checked already)
for more info: I am using SOAP adapter as a sender and receiver is R3
Thanks
Raja
Edited by: Raja on Apr 15, 2008 10:47 AM
Maybe you are looking for
-
When I export my Indesign document to an epub why is the first image smaller than the rest?
All of the images are intended to be full page, and appear so in Indesign, however when I export the document to an epub, and view it on the iPad, the first image displays at about half the size of the other images. When creating the images in photos
-
When I try to bookmark a page not all the folders iun my bookmark menu appear.
I have 18 folders in my bookmark drop down window. When I try to save a page only some of the folders appear in the list of folders to save the page in. The folders that do appear are not in any sequence. Some are recently used some are not. I tried
-
Firefox Randomly stops loading web pages properly until restart.
So i want to first say that iv been a long time firefox user, however a few firefox builds ago i started having this issue where randomly when clicking a link or typing a page into the url and attempting to load, the browser would just load... and lo
-
Password-protected Numbers spreadsheet only opens in computer that created it
I recently password-protected a spreadsheet file on my iMac. It works just fine when I open it on my iMac. However, if I try to open that same file from my MacBook Air, it rejects the password. It says that the password is incorrect. When I try t
-
Low level of ink in cartridges 564
I am suspicious about the level of ink in the cartridges 564. I printed one 13x19 image (a portrait) and the level of ink in HP Utility jumped to half full, after the the second print it went to 1/4 full. It seems that the level in the crtridges is v