Edit PO

Hi
need some help regarding editing a PO.
Can we change the Item category in some way in ME22N ?
Pls advise.
regards
Kumar

hi,
When you see the settings in the Customising in the SPRO...
Here when for GR: PO item linked is ticked, and no indicator is ticked for the GR indicator FIrm that means item cat can't be changed, if it would be ticked, then it will changable in the PO ...the same goes with the IR also...
So we can say that when ever the PO item linked indicator is ticked with the GR or IR indicator not ticked an item cat can't be changed in the PO if and if the further docs like GR and IR are made for PO...
Regards
Priyanka.P

Similar Messages

  • Open and edit animated .gif while preserving frame timing

    CS4 Premium Design Edition, Win XP
    I was disappointed with the removal of Image Ready from CS3 because although some of the functionality was placed into Photoshop 10, there was no way to open and edit an existing animated .gif while preserving the timing of each individual frame. I was told on the PS forum at the time that I really needed to use Fireworks. I resented that, because I was very happy with Image Ready and I didn't want to have to learn a new application just to gain functionality that had been included in previous versions of PS/IM.
    I've now got CS4 Premium Design Edition which of course includs Fireworks... and here's what Help has to say on the subject of imported .gifs.
    "Note: When you import an animated GIF, the state delay setting defaults to 0.07 seconds. If necessary, use the States panel to restore the original timing."
    This is no use to me. What if I don't know the individual frame timings? What if there are 200 frames with varying timings?
    Simple question: which current Adobe product is capable of importing a .gif while retaining the frame timings? If anyone knows, or if I've misunderstood the nature of the Fireworks Help quote above, I'd really appreciate some input here. Thanks :)
    Not so simple question: why was an excellent gif-editing application thrown out to have its functionality partially replaced by a bunch of scripts and half-effective workarounds cooked up by desperate users ("import a gif by using the video import and typing *.* into the filename box..")? It's a fair question I think.
    Mark

    Hi Bob, that's not glib at all, it's a reasonable question.
    I uninstalled it along with everything else when I installed CS3, in the reasonable expectation that whatever replaced IR would be at least equal in functionality.
    Perhaps I should just dig out CS2 and install IM from there, but I have some serious reservations about doing so, because I don't know if/how a partial install of CS2 will impact upon my installation of CS4, and I'm not confident of getting support.
    I am also curious to know if/why Adobe actually removed basic functionality without replicating or replacing it in their other software. I really want to know: which recent, currently supported Adobe product
    should I be using in order to regain this functionality? Or do Adobe no longer produce a geniuinely comprehensive .gif-editing application?
    Mark

  • Creative Mediasource ID3 Tags - Edit more than one year at a ti

    I use a 60gb Zen Xtra with Mediasource. I take pride in the ID3 tags of all my files especially those of my Jazz collection and my player is well organised. The only thing I have to ask is - is there any way of editing the year of, say, an entire album that was recorded in 959 for example all at the same time. It lets me do this for Artist, Album and Genre but not year. Is there any upgrade in software I can get or am I just missing something here?
    Thanks in advance for your input,Matt

    Shucks, I tried and you can't seem to do it. A curious oversight.
    You can either use another copying program like which will let you do it, or simply get a mass tagger (but you will need to edit the tracks on the PC first, then copy). For some mass tagger recommendations look here in the Zen FAQ at Nomadness.net.

  • Unable to capture data in an editable dynamic ALV.

    Hi ,
    I have created a dynamic editable ALV whose displayed structure can be changed at runtime based on the selection in a drop down list value selector.
    Im trying to capture the values entered in the ALV into an internal table before the user changes the structure of the ALV to a different structure.
    In the ON_SELECT event handler of the drop down list box , im rasing a data_check event to capture the ALV data.
    The problem is that the control is not entering the event handler for the data_check event.
    If i raise the data_check event in my save event handler or any other event handler , it works fine.
    Can someone please suggest a solution.
    Regards,
    Newton.

    Hi ,
    I have figured out that the problem is local to my machine , because the code works fine on other machines.
    I guess my internet explorer has some bug.
    Regards,
    Newton.

  • Lock Ups !!!!!!! "k7t turbo limited edition"

    1.3g duron
    k7t turbo Lim.Edition
    256mb 133mhz sdram
    40gig seagate , 10gig samsung
    Liteon 16x10x40x / 52x cdrom
    7200 Radeon Pci 32mb
    REalTek Ethernet
    Welp fixed other problem by installing XP with cpu cache off and then turned back on when finished. Everything seemed to work fine all up to the point when I tried to start playing games. First game "quake 3" works fine aslong as im constantly moving intill I have to leave it on untouched for a min or so. Then it locks up or freezes and all I see is a black screen. In  starcraft it will let me play for a good 2 minutes and then the screen freezes. Last game  I tried was black and white that let me play for a good 4 mins then everytime i tried again the time it took to lock up got shorter and shorter. Ive installed new bios and via chipset drivers and still nothing.
    Anybody got any other ideas I can try ????????????

    well I didnt think I needed to since I was using a PCI card. I guess Ill go ahead and try. As for my power source im going to list everything it says cause i dont know a thing about them.
    model: atx-350-12v
    max output is 350w
    input:        output:
    115vac        +12v   15a       max
    8a max        +5v    35a       max
    60hz      
    230vac        +3.3v  20a       max
    4a max        -5v    0.5a      max
    50 hz         -12v   0.5a      max
    hope that helps

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Installation problem on windows server 2008 r2 datacenter edition 64bit

    hi
    today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
    because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
    so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
    this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
    why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
    thanks for feedbacks!
    regards, jan

    > no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
    If you take the time to give exact error messages then someone will be certainly able to help
    > on windows server 2003, there are NO problems.
    Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
    I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
    Markus

  • I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    The application Acrobat provides no language translation capability.
    If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
    Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
    Transfer the output into a word processing program that is localized to the appropriate language.
    Do cleanup.
    Be well...

  • New to HD Editing and CS, building a PC to suit requirements of HD edit. Experienced help wanted :-)

    Firstly let me say hi and thanks in advance to all that read and assist with my questions
    A Bit about me..
    I have recently acquired the need for video editing at a much higher level with both having a family now (baby daughter) and a very active hobby (rc heli flying at a sponsored level).  With this in mind I bought a HD video camera some time back without the realisation that, to effectively edit such footage requires horsepower!!.... so i have saved up for a new computer and ended up here after much reading on various forums (toms hardware, video guys etc etc).
    Where I am up too....
    I have started by firstly implementing a NAS into my Home network which is primarily used to store and stream media (Gigabit LAN) around the home. It is setup in RAID 5 with 5 x 2TB disks (so about 7TB of storage).  I have done this so there is some backup of photos, movies, home video etc (if I lose a disk , hopefully i will not lose the lot).  I have also acquired adobe Premiere Pro CS 5 and now need a workstation that will allow me to edit in confort ( the one I have will not even run it!! .
    My aim is to store original files and completed work on the NAS (or burn to Bluray etc).
    I am looking at a PC solution, as I can obviously get more horsepower for less $$ than a laptop solution. 
    I have built PC's in the past but not with high frequency and this will be the biggest budget one I will have attempted. I have been researching alot over the last few weeks about sytems and components and found this forum to be very good in dealing with hardware specs and requiremnts in a very proffesional way.
    I am now at the point where I getting a little muddled with which way to go and still have a lot of research to complete.  My approach is to tackle each of the components needed one at a time in a fairly hierarchial manner.
    What the PC will be used for..
    This PC will be used primarily for the video editing and some gaming (when I have time).  AlLso any other horsepower intensive apps if needed (I have a laptop and other comps for general duties).
    Budget
    My budget is fairly rigid at $2500 AUD (so I am not looking at a Zeon solution LOL). The budget is to include:
    Case                              ?
    CPU                            Intel I7 2600K (based on my research this seems to be the best way to go with my budget and needs)
    CPU Cooler                  Standard Intel supplied Cooler (seems to perform reasonably well even when moderately overclocking (~4.0 - 5.0 khz) 
    MOBO                           ?
    RAM                              ?
    Graphics Card                 ?
    BLURAY Writer               ?
    PSU                               ?
    HDD Storage               1 SSD and 3 HDD's with 2 in Raid "0"
    OS                              Windows 7 64 Bit
    23 inch Screen               ?
    Questions
         Motherboard
    I guess my issues with MOBO slection revolve firstly around which chipset to go with Z68 (newer) or the P67?  It seems the Z68 is feature rich, however I also seem to feel that the Quick sync and SRT would be better disabled with what I am setting the machine up for? So therefore what advantage is there with going with Z68 if any? or am I better off getting a more established P67 chipset based board?
    I also see that some boards have the Nvidia NF200 for expanding bandwidth on the restrictive 16 PCIe lanes available on the 1155 socket boards given I am only looking at one decent Graphics card is this a chip I should avoid (as I have read this can cause latency with only one graphics card)?
    Another thing I have noticed is some boards have a PLX PEX8608 chip which seems to manage the limited PCIe lanes better if other cards are plugged in?
    I also see some boards have the Marvell Sata 3 controller on them that does not seem to perform as well as the native Intel Sata 3 controller on the Southbridge in tests.  I guess I have no real idea of when I would be looking at stretching the bandwidth and wonder whether I need to concern myself with 4 x sata 3 connections (2 intel and 2 Marvell)?
    One last question I see there is now MOBO's available with PCIe 3.0 available (even though there are no devices that can utilize it) is this even worth being a consideration or is it not really of any importance to the slection process?
    In summary it appears there is lots of goodies on offer with different chipsets and boards, however I do not want to waste budget on things I have no use for or gimmicks.
         CPU Cooler
    It is my intent to start with the factory supplied Intel bundled cooler and invest the money not spent on this item on better graphics card etc. For moderate Overclocking it seems to perform ok.... am hoping this will be ok?
        HDD Storage
    At this stage I am not up to speed with the exact storage devices I need, I am initially looking at whether my ideas for a storage system have merit? Please bear in mind I am not a CSpro user as of yet and so some of this is just based on research with no base knowledge....?
    1 x ~120Gb SSD                                    for OS and Programs
    1 x ??Gb/TB HDD 7200 rpm                    for Media Projects
    2 x ?? Gb/TB HDD 7200 rpm in raid "0"    for Media Cache and Preview Files
    Will the onboard Raid controller accommadate the above adequately?
        Graphics Card
    I am looking at Nvidia as far as I can tell so that I may make use of the CUDA threads and as far as type I assume I pick the best one of the approved list (adobe approved list)?  I am still confused ast to whether there is any benefit from a using a twin GPU card, its unclear to me whether the CUDA can tap into both of the GPU's on such a card? Of course budget restraint will come into play here.
         Ram
    I am looking at 4 x 4gb dual channel Ram cards to give a total of 16Gb total (DDR 3)  as for brands, types and frequencies I have no idea yet and need to cover off some of the above first before my research gets too wide?
         PSU and Case
    I am hoping for a modular device for this, however I was thinking this and the case are a low priority at this stage (until some of the other solutions are verified).
         Blur Ray writer /reader
    With me using my NAS for media streaming I will not be burngin to many Blu ray disks, however I will be reading a few so that I can upload them onto the NAS via this unit.  I have no idea what is a good or bad unit or what to look for in this area?
         Monitor
    I have found some cheap solutions in the 23" sizing for a main screen (~160 AUD) supported by my existing 17' monitor, however is there anything I should be looking for in particular with the monitor I choose?
    I will update each section with what is decided on so that it may help others who are having the same tough decisions to make?
    Even if we just tackle the Motherboard first I would be greatfull...
    Thanks for reading and again all assistance is appreciated.
    Regards
    Jody

    Ok well after much reading I have got the following as the setup that shoe horns in at $2500 ish...
    Interested in thoughts for Premiere pro:
    Component Model $ each Stat Ice Store
    Case
    UNKNOWN AT THIS STAGE BUDGET $200
    Power Supply
    FSP Aurum Series 750W Modular Power Supply $139.00 PCCASEGEAR
    Motherboard
    ASUS P8P67 Deluxe REV 3 $212.00 I-Store
    Processor
    Intel I7 2600k Gen 2 $324.00 All needs Computer
    CPU Cooling
    Thermalright Silver Arrow CPU Cooler $89.00 PCCASEGEAR
    Memory
    G.Skill Ripjaws X F3-12800CL8D-8GBXM (2x4GB) DDR3 $79.00 $158.00 PCCASEGEAR
    OS/Programs Drive
    Patriot 120G Wildfire SSD SATA3  $289.00 Umart
    Capture/work Drive
    2 x  Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
    Render to Drive
    2 x  Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
    Dual/Quad Head Video
    Gigabyte GeForce GTX 580 Super Overclock $589.00 PCCASEGEAR
    DVD-RW
    LG BH12LS38 Optical Media (OEM) $68.71 Mega Buy
    Operating System
    Windows 7 64 Bit Pro $129.00 Umart
    Monitor
    Samsung S23A300B 23in Widescreen LED Monitor $149.00 Netplus  $2,362.71
    Total
    This will be supported by a 10tb 5 disc NAS on Gigabit connection for long term secure storage.

  • Edit animated gif

    Hi,
    How can I edit an animated gif in Photoshop Elements 6 for Mac?
    When I open the file there is just the first frame in one layer - no other layers available.
    Thanks!

    Thanks Barbara!
    Barbara B. wrote:
    ... then bring it to PSE.
    I can't drag the single frames from Preview to PSE, because PSE 6 doesn't run in window mode.
    (Is this improved in the current version?)
    I can only drag the single frames to the desktop (as TIFF files, I guess transparency info is lost then?).
    Barbara B. wrote:
    ... there's a bug beginning in PSE 6 where you can't change the frame delay rate from the default when you save an animated gif.
    What's the default frame delay rate? Maybe it's just what I need.
    Barbara B. wrote:
    You might  want to look into a free program like giffun from stone.com instead.
    Yes that's maybe a better idea. It doesn't have to be free software. Can you recommend something good?
    Thanks again!

  • Can i open and edit animated GIF in Adobe Photoshop Touch?

    Can i open and edit animated GIF in Adobe Photoshop Touch?

    No, only regular static GIF images are supported. The desktop version of Photoshop does support this however.

  • Preserving PDF links and actions created in Acrobat after editing in Illustrator

    I created an interactive PDF in Acrobat from an Illustrator file saved as a PDF.  It's basically an interactive prototype that simulates dropdown menus, highlighted selections and navigation between screens.  Using the Link Tool, I set layers to appear through the layer visibility action, and certain layers to toggle through javascript.  Since the prototype is evolving, however, I have to periodically make minor edits to it in Illustrator.  Once I make an edit and save the PDF again, when I open up the saved document in Acrobat, all the link tool actions are gone.  This is highly frustrating because most of the edits take just a minute or two in Illustrator, but I have to re-create all the links in Acrobat when I'm done, which takes a very long time.  How can I make minor edits in Illustrator while preserving the action elements I created in Acrobat?

    Well, that's a bummer.  It's so close to a feasible workflow for generating quick early-stage prototypes that you can continue to work on. 
    Thanks for the info.

  • Edit and output video without modifying any pixels?

    That subject line sounds cryptic, I'm sure, but I need to assemble numerous snippets of animated pixel art into what should become a somewhat lengthy animation. Final Cut should perform no internal resizing and no compression prior to output; all input files are 240x160 without exception. Stills are PNG to take advantage of the Alpha channel, but the animated clips are uncompressed QuickTime with a single, unique RGB value reserved for the background for chroma-keying (all layering is to be all-or-nothing with regard to the Alpha/keying; there is no partial transparency at play).
    All I need is to compile these clips together, layer a few elements on top of each other, and tweak the timing here and there. Beyond that, Final Cut should leave everything exactly like it found it, down to the pixel. (I'll worry about the output format and compression later.)
    Is this possible (and easy) in Final Cut Express? In my disastrous trials with Adobe Premiere Elements (v.1), Premiere insisted on internally resizing the clips for editing, which fuzzed up the images and defeated the chroma keying (as if the fuzziness wasn't bothersome enough). It's possible this was due to user error, but as far as I can tell, nothing can prevent Premiere from reprocessing everything into its native DV dimensions, which is quite destructive toward pixel art. Anyway, I'm frustrated enough with Premiere that I'm willing to purchase Final Cut, if it can meet these requirements easily.
    Thanks much for any information you can provide. Oh, and if Final Cut could possibly output the entire sequence as an animated GIF, that'd be fantastic, but I tend to think it'd be a little too heavy-handed (even though my total palette is well below 256 colors) because it's used to crunching fancy true-color videos instead of this basic pixel art.

    After some further research, it seems my best approach for this project will be to compose my small QuickTime clips with all layering done beforehand, then assemble them with a utility such as QuickTime Pro or MPEG Streamclip, as discussed here:
    http://discussions.apple.com/thread.jspa?messageID=7813920&#7813920
    MPEG Streamclip, in fact, seems to work quite well in my initial tests. If the clips are numbered sequentially, dropping them into the application assembles them beautifully. And it's free!
    Thanks again to those who replied.

  • Edit .Gif

    Hi,
    I am developer not photoshop professional. But for some reason our creative person is absent for some days.
    Now I want to edit .Gif file. please help me.
    As per forums discussion I am trying to open the .Gif file using photoshop but it showing me warning that "This is an animated Gif. You can only view one frame.Saving over this file will result in loss of information."
    Please help me in this task..
    Thanks in advance..

    Here is one way:
    http://techtidbeats.blogspot.com/2011/11/how-to-openedit-animated-gif-in.html
    It's possible the other person was using some other software for gif animation, besides photoshop cs4
    or they have the master files saved as psds somewhere.

  • How to edit a Animated Gif file and convert to SWF

    I am using the creative cloud with fireworks. I chose the free trial with buying in mind if I saw it work properly. I simply want to upload an animated GIF file and then download it as a SWF file. I saw someone on youtube do this and it's not that if I get on the correct page I would not know how to do that but I just cannot find how to get the GIF into the software to edit. It has just simply put them in the creative cloud folder which can open them on IE> How do i make it available to edit and convert to SWF please? Thanks in advance.

    You will likely get better program help in a program forum
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Animated Gif Editing Help

    Im trying to add a face to every layer of the gif, so i can move the head, eyes, and mouth.. when i add the image of the face to layer 1 of the animated gif, its good, i hit play and the first frame is the head and it disapears on the second, but when i duplicate and edit the face and put it above the second frame of the animated gif the origional face gets edited aswell, making it unable to create the illusion of the eyes moving from one place to the other, how can i have different images of the face on every frame of the video?

    Hi,
    What version of Ps do you have and what platform are you using? Are you working with video content for the layer changes, or do you have a still that you're manupulating?
    regards,
    steve

Maybe you are looking for

  • How to hide title text while launching a ECC transaction thru ITS in ICWC

    Dear all, We are calling an ECC transaction into ICWC through Transaction Launcher. Our client doesn't want to see the Title of ECC transaction which appears top of the ECC transaction screen. (for ex: Create Sales Order). How can we hide it, kindly

  • Text in Spry Slideshow, not working in Explorer.

    Hi, I have attempted to search for a similar topic, but am not able to find anything. I have input the spry slideshow into my page, and it is fully functional for safari, chrome, firefox, but seems like it is only not working in IE. The text that is

  • Invoice cancellation does not create accounting document.

    Hi. here's the scenario. A billing document has been creating in transaction VF01.When created, an accounting document and a controlling document have been generated(you can get the document numbers when you click on the 'Accounting' button in VF03 o

  • How To Performance Optimize GRC Access Control 5.3

    Hi Everyone, GRC RIG published in BPX the following How-To-Guide: How To Performance Optimize GRC Access Control 5.3 https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90aa3190-8386-2b10-c4ba-ced67322ea6d We appreciate any feedback a

  • Revert to mountain lion

    Hi guys, i upgraded to mavericks os and don't really like it, how can i revert to my previous version of os, do i still have it on my computer? Thanks for any advice. Ela