Edit start-up applications ??
hi all
I have installed the Cairo-dock application and launch it , everything is OK , but it disappear automatically when I reboot.
so how I can modify the start-up applications in Gnome-shell ??
thanks
Please learn to search the wiki before asking questions here. This one, for example, as some of your others, is well documented:
https://wiki.archlinux.org/index.php/Gn … logging_in
Help vampirism is discouraged.
Closing.
Similar Messages
-
ABAP Trial version u2013 starting the application server
Hi,
I have a problem starting the application server via the management console. After choosing action ->start I have to enter user and password. Do I have to create a new user password combination, use the OS password or try bcuser and minisap? None of these three options worked out. I always get the message 'Start failed: 2 Invalid Credentials'. Or went there something wrong during the installation?
Thanks for your help.
BirgitHey Birgit,
In my case I installed ABAP Trial version (also known as MiniSap) on my local machine (Windows).
When I turn on the machine, my Windows(OS) requires a User/Password (It was configured this way but it is possible you configure to not require a User/Password, it uses a default).
When I instaled the ABAP Trial version, I logged on with a User/Password with administrator rights (it is necessary for installation).
When, in the "Management Console", I start the ABAP (the "NSP" node), it asks me the user and password and I use the OS User/Password that I used to install ABAP Trial (above).
If you are doing the same I don't know why the message "Start failed: 2 Invalid Credentials".
Merry Christmas,
Edited by: Walmir Catunda on Dec 15, 2008 11:34 AM -
I've always used both iPhoto and Adobe Photoshop Elements for editing my photos. Previously, I could edit in the external application (Adobe PE), save the photo (back to iPhoto), go back into iPhoto and then still edit that photo within iPhoto if I wanted to.
Recently, though, if I edit a photo in Adobe PE and save it, if I attempt to edit it further within iPhoto, I am warned: "Image Cannot Be Edited: This photo was previously edited with another application or with an early version of iPhoto. Duplicate this photo to edit it."
I don't WANT to keep duplicating my photos - it's a stupid waste and I just want to tweak my previously edited photo.
When did iPhoto start requiring duplication in order to edit a photo that had been worked on in another program?
And why?
And is there any way I can change this or get around it?
Thanks.Where are you seeing these Jpegs when you duplicate the Raw?
Duplications are virtual. Try this test.
Select a Raw and go File -> Reveal in Finder -> Original
That brings you to the Master file in the iPhoto Library. It's selected.
Apply a label to it - In the Finder: File -> Label.
Now, back to the iPhoto Window and gp Photos -> Duplicate
You now have a second snap in the Event -> My Photo - version 2
Select Version 2 and go File -> Reveal in Finder -> Original
Notice that it brings you to the same file.
So, you've duplicated the Photo, not the file.
Regards
TD -
Gnome-Shell 3.8 freezes a few seconds when i start an application.
Hi!
I've been using GnomeShell for abount 1 year now. But there is an pretty anoying thing with it. When i open (for example google-chrome) the clock stops and i cant click on anything for about 3 seconds. But not only when i start an application but also randomly when i busy with developing PHP etc. Is this an known issue? And is there a way to fix it?
Cheers,
KevinI can confirm this issue partially. When I try to search for the application, I type a few letters (depends on the speed of typing) and Gnome freezes for a few seconds.
Probably
extra/tracker
is the cause.
Edit:
I have removed tracker, gnome-photos, gnome-documents, but with no luck - it still lags. I did the trick with:
top > /tmp/top
and proceed everything again. This shown me that the problem was gnome-contacts, which went to the ~70% CPU.
I removed it as well and everything works fine now.
Last edited by hsz (2013-06-05 19:49:14) -
Start javaws application just with X server
Hello!
I hope someone can help me to get my javaws application started without any window manager just by using a x server.
It works by starting xterm (xinit /usr/bin/xterm) and then stating my application in xterm by "javaws http://url".
Is it possible to get my application started directly? (Without xterm...)
Do I understand it right? Before I can start the application, X server has to be running? After that start the javaws command?
How can I get this managed?
Thanks a lot!
YvesThere must be *some* foreground process to keep the connection with the xserver - in common setups a window manager will serve this purpose, but it could be anything else.
If the javaws call is backgrounded (is this mandatory / can you override this) then you need some other process.
One way would be to launch it from your xinitrc, then get the PID and wait for that PID to close. The simplest implementation of this would be with the following in your xinitrc:
javaws httpp://...
wait $?
EDIT2: The second line should be something like:
wait $(pidof javaws)
Actually, after rereading `man wait` the $? which speicfies the PID may not even be necessary.
EDIT: completely OT, Karol is our "Archivist" now?
Last edited by Trilby (2013-07-23 15:47:30) -
Can´t start the application
Hello friends!
After installing NetWeaver 7.02 I wanted to start a WebDynproABAP application. I activated WebDynpro like shown in the tutorial "Step by Step Configuration for Running Web Dynpro in SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version". But When I start the application I don´t get the login-popup like shown on page 8 of the tutorial. I get only the first yellow bordered Window with the links "logon" and "change password" but the buttons do nothing.... I can´t fill in the username and password....
Can anybody help me find out the problem? I thaught it was a problem while the installation - so I installed it all again - nothing changed.
Please help me!
Thanks
Martinthere are 3 Errors in the sapmmc:
1. Process type RD - Message S10 - Communications data: Service initialization failed
2. Process type D2 - Message BS5 - SAP Basis System: Buffer synchronization has not been called for too long
3. Process type U3 - Message BY4 - Database: Database error -8007 with PRE access to table WBCROSSGT
DSR: Transaction: E80269E124F7F1B1B4B7000C294D1C08
Root: 000C294D1C081EE19AA04658118B74B7
Connection: 00000000000000000000000000000000
Counter: 0000000000
How can I solve this?
Edited by: Martin Tilenius on Mar 8, 2012 11:37 AM -
I just started using a Mac computer running 10.8 and it has a command for all applications, Edit > Start Dictation.
I got it to work flawlessly in MS Word, but when I click inside a text frame in ID CC, I get the first letter of the first word and then nothing else.
Something to write off or is there a secret?Are you sure you are using the mouse properly? http://www.youtube.com/watch?v=hShY6xZWVGE
-
How to start a application with a login window?
hi there
does anyone have any idea on how to start an application with a login window? a login window is the first frame or window to be displayed when an application starts running. and only correct login id and password have been entered the real application will start. any sample out there? thank you.You can start a new thread by making a thread object and passing it an implementation of a runnable object. Runnable has just one method, public void run(), this is was gets executed in a second thread. perhaps the code you would use would look something like this.
<code>
// set up thread for login window
new Thread(new Runnable() {
public void run() {
// construct your login window here
// when you are done processing the
// password....
if(goodPassword) {
authorized = true; // a global variable
notifyAll(); // don't forget this
else {
System.exit(42);
}).start();
// control does not stop this code gets executed while
// the above thread is running.
// Set up main program here. This is done in the
// backround.
while(!authorized) {
synchronized(this)
{ wait(50); }
// now when the user logs in this frame pops
// up real quick.
myFrame.setVisible(true);
</code>
Hope you can figure it out.. good luck :) -
How to start an application in the background using "oscmd" on windows
Is there any way to launch a windows application using oscmd without suspending xmath?
From a "cmd" window one can use the start command:
> start notepad
Which starts the application without suspending the "cmd" window.
From xmath command line, one may use:
> oscmd("start notepad")
This starts the application. However, the user cannot interact with xmath as long as the application is running.
Thanks
Xmath715, windows xp version 5.1 SP2Hi Farshid,
There is a command in the Shell API of Windows that runs an executable:
#include <utility.h>
#include <ansi_c.h>
#include <shellapi.h>
#include <windows.h>
int main (int argc, char *argv[])
int res;
if (InitCVIRTE (0, argv, 0) == 0)
return -1; /* out of memory */
HINSTANCE stuff;
stuff = ShellExecute(NULL, "open", "notepad.exe", NULL,NULL, SW_SHOW);
printf("%i",stuff);
return 0;
You can build a similar program into an executable and since the Parent
executable will finish executing, control will return to XMath even
while notepad is still open.
Richard
Field Sales Engineer, New Jersey
National Instruments -
Error while trying to start the application
Hi,
Could any one please suggest the cause for this error. This error occured when I tried to start the application installed on Websphere server.
--------Reading configuration for server: server1
ADMU0111E: Program exiting with error:
com.ibm.ws.process.exception.ProcessOpException:
com.ibm.ws.process.exception.ProcessOpException: Error creating new
process.
Thanks in advance.Hi,
Could any one please suggest the cause for this error. This error occured when I tried to start the application installed on Websphere server.
--------Reading configuration for server: server1
ADMU0111E: Program exiting with error:
com.ibm.ws.process.exception.ProcessOpException:
com.ibm.ws.process.exception.ProcessOpException: Error creating new
process.
Thanks in advance. -
Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" when starting my application created in LabVIEW 7.1? I am starting the application in a PXI rack running Windows XP. I have an executable written in LabVIEW 7.0 that runs without this error. After clicking the Continue button in the error, the application seems to continue happily.
Is there something I need to include when I make the executable?
I would like to understand and eliminate this start up error.
Thanks in advance.
BobNorthHi Bob,
I looked through the program and I figured out where the error is coming from, and potentially what is causing it. In a lot of the cases of the program you are searching a 1-D array for the name of the case, and if you don't find it then it skips the function and gives "Error 1 occurred at Config Data Registry.vi(CASENAME) invalid object 0". I attached a screenshot that shows what I mean. The Search 1-D Array.vi is returning a -1 which means it didn't find the case. The reason I believe this is happening is because the shift register for that array is not initialized. While the other cases "reset" and "register" interact with the array shift registers and most likely create the array you need, if the program defaults to the "get data" case then it will try to run that before registering and won't have an array to search. This would also explain why it only has this problem at first and seems to run just fine after that. To fix this you should either make an initial array and wire it into the shift register or make the "reset" case the default as opposed to the "get data" case.
Regards,
Peter W.
Attachments:
Config Data Registry.png 55 KB -
Can't start VC application in Portal 7.3 tc~wd4vc~launcher error
Hello,
we are trying out visual composer 7.30 with Portal. After developing in VC and deploying to portal I can't start the application. In the log-files there is the following message:
Application sap.com/tr-gruppe_impl cannot be started. Reason: it has hard reference to application sap.com/tcwd4vclauncher, which is not active on the server because application is not deployed. Probably refering application sap.com/tr-gruppe_impl declares runtime but no deploy-time dependency to the referred application which is wrong. Deploy the component sap.com/tcwd4vclauncher or contact owners of application sap.com/tr-gruppe_impl to check their references..
I have read several threads that tcwd4vclauncher doesn't exist in portal 7.30, but these threads don't offer or describe a solution which fits my problem.
Do I have to deploy the missing component? If, yes where can I get it?
Please, does anybody have met the same problem and solved it?
Thanks in advance,
Kind regards,
LuHi Lu,
Please make sure the WDEXTENSIONS.sca, BI-WDEXT.sca files are deployed on your system.
Regards,
Natty -
Can not Start Oracle Application Server ORB process
I have just installed Oracle Application Server (OAS) on my
machine running Windows NT 4.0 Workstation. When I logon to the
OAS manager and tried to start ORB, I got below error message:
Please wait while the command is being processed on host ssoh_x
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
Starting ORB processes...Returning filename D:
\orant\orb\admin\.event
waiting for ORB to be ready...
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
ORB is not responding. Please restart manually...
I have tried to re-install OAS for the second time. But I still
got the same problem.
I plan to use the OAS, together with Oracle Internet Commerce
Server (ICS) to develop an e-commerce project. I am yet to
download and install the ICS. I don't have any Oracle databases
installed in my machine. I'm using MS SQL Server 7.0 instead.
Please advised me on how to configure the ORB so that I'll be
able to start the application server.
nullHi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null -
Error starting the Application Server and Deployment Tool
After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!Hi,
Would be more helpful if you can mention, the O/S. Also, pls mention where
you are getting this error, at kjs or kxs, or, are you able to start the server
and at which specific instance do you encounter this.
Regards
Raj
"Antonio Casqueiro" wrote:
After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please! -
Error starting the Application Server and Deployment Tool in Windows 2000
After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?
Maybe you are looking for
-
Can we add new logical system in Entitlement tab in SAP Authentication.
Hi , We already Installed and configured sap integration kit and every thing works fine. My question is as of now we connected our sap BW Dev system to BOBJ but we would like to connect to BW Prod System to same BOBJ System. What are the steps we ne
-
Multiple input currencies for a single entity
My client must support multiple currencies for any given Entity. For instance, Spanish Company #1 must be able to record transactions (sales and purchases/costs) in both Euros and in British Pounds, since both currencies are used by this entity. Si
-
Customized Ringtones do not play on iphone
I was able to create customized ringtones and get them on the iphone, but they will not play when I get a call or go to the ringtones to hear them. Has this happened to anyone else?
-
Hi all I have a 2008 model iMac running Snow Leopard 10.6.4. After installing the most recent security update this weekend, the machine rebooted and hung on start up (it was stuck on the circular activity indicator / gray screen for well over an hour
-
Mp600r does not work after installing mavericks 10.9 what do I do now ?
Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?