Edit step list configurations
In teststand 3 and earlier, when executing a sequence it was shown in a column the result of the step and the high limit and low limit
Now in TS 4 it is possible to edit the step list but i did not manage to show the step result . For example if i create a new column (type expression) and just put Step.Result.numeric, xhen executing the sequence I have a popup because for some steps there is no step.result.numeric available.
My question is how to have the same as TS 3 and earlier ( Result + limits in a column when executing a sequence)
Note that the numeric measurement appears as part of the description for the numeric limit test. The default TestStand 4.0 step list configuration has a description column, just like previous versions.
I guessing that you probably know this and are purely interested in creating a custom step list configuration, but I wanted to be clear that this functionality has not been removed.
Similar Messages
-
Import sequenceview control property from step list configuration
I have worked out a step list configuration in my development maschine
How to import it in a User Interface (labview simple UI) . I have to run it on my deployment maschineHi aparab,
thank you for your answer.
I am stil not sure what you exactly want to change.
If you only want to change the view of the Simple User Interface between Edit Mode and Operating Mode, you can do so by selecting Ctrl + Alt + Shift + Insert.
If you want to manipulate the look of the Sequence File, this is an X-Control in the background. If you need another look, you can change the control on the Simple User Interface in LabVIEW. But you have to implement all the functionality by yourself then.
There is a toolkit called FlexStand, that might be a solution for you. I added the links to some information about it and the product page below.
FlexStand Operator Interface™ - The Flexible NI TestStand Operator Interface - National Instruments
http://www.ni.com/white-paper/11016/en/
FlexStand Operator Interface™ von CIM Industrial Systems - National Instruments
http://sine.ni.com/nips/cds/view/p/lang/de/nid/210040
I hope, one of the points above answer your question. Otherwise, let me know and describe what you exactly what to manipulate and how it should look like. You can add some screenshots, that help me understand.
Regards,
Melanie -
How to deploy custom Step List Configurations?
Step List Configurations is accessible to user via right click menu in Sequence File and Execution panes. How to deploy the custom Step List Configuration what I have at my deployment computer? Next question, if the user will modify this menu, how do not overwright the local changes with a new version installation?
Sergey Kolbunov
CLA, CTDskof,
To you copy your Step List Configurations to another PC you can find them stored in the layout_current.bin file found in C:\Documents and Settings\<windows username>\Local Settings\Application Data\National Instruments\TestStand X.X directory. If you copy this file to the same location on another PC, or even on the same PC to a different user account, your Step List Configurations should carry over.
Since this file is stored in a directory that is different for each major version of TestStand, you shoulnd't have to worry about overwriting it if you install a new major version (4.2 over 4.1). I haven't tested for minor revisions that would share a folder (4.0 & 4.0.1) but that would be the only situation in which you might need to be concerned.
John B.
Applications Engineer
National Instruments -
Modifier "step list configuration" Teststand 3.5
Bonjour, Je voudrais modifier les "steps liste configuration" sous Teststand 3.5. Je sais que la fonction existe sour la version 2010. Je voudrais ajouter des colonnes. Cette fonction existe sous Testsand 3.5 ?
Bonjour geof31,
Je pense que les documents devraient vous aider à vérifier si les actions peuvent être réalisées sous TestStand 3.5 :
Where are my TestStand Step List Configurations Stored?
Changing Columns Properties of the TestStand Sequence Editor Execution View Window
How Can I Hide Comments in TestStand?
Adding Step Numbers to Your Sequences
Cordialement,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France -
Step List Configuration Question
Hi,
I'm using TS2010 in .NET ,Is it possible to change my custom
list configuration through my application(font size,width,etc..).
Thanks
AssafAssaf,
yes, it is possible.
The key to start with is "axFileSteps.". In the context menu, browse for the property you want to modify.
Font-settings for instance split up into three categories:
Text
Header
Comment
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Make Not 'Visible' "Setup Main Cleanup" in Step List Configuration
Hi
I dont want the Operator to see the "Setup Main Cleanup" text while testing
any ideas how to acheive this
In the image as u see the "Setup Main Cleanup" are unwanted info for the Operator
& can confuse. I wasnt able to reduce its size also
the operator only sees the Steps with Large text
Attachments:
steplistconfig.PNG 160 KBHi aparab,
I don't know if's possible to hide the sequence editor itself in the TestStand development system.
If you want to customize the GUI for the operator, it could be usefull to create a custom UI in LabVIEW, .NET ...
Take a look into this document for further information:
Best Practices for NI TestStand User Interface Development - National Instruments
http://www.ni.com/white-paper/7560/en/
Regards, Stephan -
Steps to configure FBA in office 365
hi,
i need to integrate users in SQL list to office 365 , is it possible to achieve this using Form based authentication??
if yes , then give some guidance steps to did integration.
if not , then suggest me a best and simple way to do this.
Please help me with this? i need steps to configure FBA in office365.
Thanks
Mohammad ArifThese are not in SharePoint. those web.config are in ADFS server.
http://social.technet.microsoft.com/wiki/contents/articles/4184.ad-fs-2-0-auto-populate-the-username-field-of-the-forms-sign-in-page-when-signing-in-to-office-365.aspx
Modify FormsSignIn.aspx.cs
1. Open FormsSignIn.aspx.cs for editing
2. Find the following and set your cursor to the next line down:
using System;
3. Paste the following code:
using System.Web;
4. Find the following and set your cursor to the next line down:
protected void Page_Load( object sender, EventArgs e )
5. Paste the following code:
HttpCookie cookie = Context.Request.Cookies.Get( "Office365Username" );
if ( null != cookie && !String.IsNullOrEmpty( cookie.Value ) )
UsernameTextBox.Text = cookie.Value;
cookie.Expires = DateTime.UtcNow.AddDays( -1 );
cookie.Value = "";
Context.Response.Cookies.Add( cookie );
6. Save and Close FormsSignIn.aspx.cs
Test
1. Launch Internet Explorer and browse to
https://portal.microsoftonline.com
2. Type the username and tab to the password
field to cause the UPN suffix detection to trigger
3. Select the link which takes you to sign in at your AD FS 2.0 Federation Service
4. Observe the forms-based sign-in page presented to you. You should find that the username field is populated with the value used on the Office 365 sign-in page. -
I am trying to get an airport express to work, it is replacing a netgear router. Tried following the directions that came with it plus suggestions sent to me but so far I am not able to get things going. Can anyone send me a step by step list from start to finish and also explain what numbers, passwords etc that I would have to install. I am the stupid in the KISS method of doing things
Hi doctorshane
Your router is the heart of your network. Replacing one changes everything.
Please follow Philly_Phan's instructions here:
My airport express won't stop flashing amber and I can't figure out how to hock it up.ihad a router which worked fine
To which I would add: disconnect your modem from power and let it rest a moment while you configure your Express. Make it a habit to do this whenever you change the device connected to a cable or DSL modem. Most modems will refuse to communicate with anything new, until its memory has been reset with a power cycle.
If you still have difficulty please explain where you are getting stuck. If you reply in that thread, not this one, it would help others with your problem. Don't begin a new question unless the recommendations you receive are getting nowhere or your question doesn't get any replies after a day or so. Philly_Phan's instructions are correct so follow them.
Otherwise, you are likely to repeatedly receive the same advice and will fail to achieve any progress. -
Steps to configure R/3 system to Portal implementation
Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
ThanksHello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022 SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022 SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022 SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022 SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022 SAP_R3_SelfServiceGenerics_MetaDataFIN
1. Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2. Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3. Choose the Maintain JCo Destinations button.
4. The available jCos are displayed with a red light, indicating that they are not yet maintained.
5. In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6. In Guided Procedure Section 1: General Data, make the following entries:
Field name User action and values Note
Name <jCo_Name> or <jCo_name>_Metadata Do not change the client number (for example, 100)
Maximal Pool Size <keep default value>
Maximum connections <keep default value>
Connection Timeout (msec.) <keep default value>
Maximum Waiting Time (msec.) <keep default value>
7. Choose Next.
8. In J2EE Cluster, make the following entries:
Field name User action and values Note
Use Local J2EE engine <SID> on <host> Selected Keep default values
9. Choose Next.
10. In Connection Type u2013 Data Type, make the following entries:
Field name User action and values Note
Data Type Dictionary Meta Data Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type Load-balanced Connection (recommended) For Dictionary Meta Data Connection, the value cannot be changed
11. Choose Next.
12. In Msg. Server Connection, make the following entries:
Field name User action and values Note
Message Server <select message server for your SAP ERP HR system> The values are taken from the technical system list of the SLD
Logon Group <select logon group for your SAP ERP HR system> The values are taken from the technical system list of the SLD
13. Choose Next.
14. In Security u2013 User Authentication, make the following entries:
Field name User action and values Note
Used Method <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name <enter connection user name> For example, rfcsysuser
Password/Confirm Password <enter a password>
Language English
SNC Mode Off For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15. Choose Next.
16. In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17. In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai -
Error in running ibots - advise steps to configure BI scheduler
Hi All,
Can anyone help me to rectify the below error while tried to create ibots using OBIEE 10.1.3.4.1 ?
+++ ThreadID: 13ac : 2011-02-07 23:47:08.171 [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure. Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC Odbc driver returned an error (SQLDriverConnectW). State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004) Error Codes: . Error Codes: AGEGTYVF +++ ThreadID: 13ac
I have followed all the steps mentioned in the material but i dont know what went wrong, if possible can anyone mention the series of steps to configure the BI scheduler.
Thank you,
SudhakarDid you try looking at the Administrator username and password in the Job Manager Configuration screen?
The error message "Authentication failed for Administrator in repository Star: invalid user/password" simply says that the userID and password do not match the same settings in the repository.
Refer to this thread
Could not create a Job with BI Scheduler
Thanks
Venkat krishna
Edited by: Venkat Krishna on Feb 8, 2011 10:22 AM -
When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?
Maybe find a local who can translate for you. I don't know what to tell you for dealing in another country for service on your computer.
I can offer you something you can do if you want to give it a try. You'll need a backup of your data in your Home folder because you need to erase the drive. You'll also need a solid, preferably fast, internet connection.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Some steps for configuring Network are skipped in installation Solaris 10
Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai -
How to make an editable bulleted list with multiple lines and custom bullets?
How do I create an editable bulleted list in Acrobat Pro? I've figured out how to add text fields with multiple lines, and how to add a list box, but I don't see the check box for multiple lines in the list box or how to add bullet points. Can someone please give me step by step instructions? Also is it possible to use custom bullet points?
Is it a text field or a list box field? The two are not the same...
The bullets are something that the user will have to enter manually (into a text field, they can only select values in a list-box).
They can use any unicode character, or special characters if the font used for that field allows for it. You can't use images for the bullets, if that's what you mean. -
Picking List configuration For user
Hi Friends
I do not know how to configure picking list for user ,
We are maintaining WM at Plant .
I would request you to mention entire process step by step which may help me to understand picking list configuration in totality .
Thanks In Advance
JayaHi,
You can do this in the transaction OMLV -> 'Print Code', Form name depends on the print code. Few are here with.
Single print / TO item LVSTAEINZEL
Multiple print / TO LVSTALISTE
Single print for ref.no. LVSTAEINZEL
Multiple print ref.no. LVSTALISTE
Picking list version 1 LVSKOMMIL1
Picking list version 2 LVSKOMMIL2
Posting change notice LVSUMBUCHEN
Single printout w. kanban LVSTOSOLOKANBAN
Single printout w.kanban LVSSAMMELKANBAN
Best Regards, -
Improvements to Export Item in Edit History List
1st off - I really like that there is an 'Export - (date/time)' item in the history list - thanks .
2nd - If a title could be added to the export, that would help.
3rd - If an export plugin could intervene - that would be cool too.
For example, my web plugin uses 4 phases of export, and I typically do it with 2 tree-sync exports, so I have 6 non-descript export entries each time I export after editing.
If I could have that web export condensed from 4 to 1 and have the tree-exports labeled to distinguish - it would be perfect!
Thanks for listening,
RobHi,
According to your post, my understanding is that you want to show edit mode when click the "Picture" fields.
We can use JSLink to achieve it.
You can follow the steps as below:
1. Save the following code as a js file(like PictureFieldTemplate.js).
// List View – Field open modal dialog Sample
(function () {
// Create object that have the context information about the field that we want to change it output render
var pictureFiledContext = {};
pictureFiledContext.Templates = {};
pictureFiledContext.Templates.Fields = {
//"Picture" is the column name. "Picture": { "View": pictureFiledTemplate }
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(pictureFiledContext);
function pictureFiledTemplate(ctx) {
var url= ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
var itemID=ctx.CurrentItem.ID;
var itemTitle=ctx.CurrentItem.Title;
return "<img alt='"+url+"' src='"+url+"' complete='complete' onclick=\"openModalDialog('EditForm.aspx?ID="+itemID+"','"+itemTitle+"')\" />";
function openModalDialog(url,title)
var options = {
title: "Item-"+title,
width: 600,
height: 600,
url: url
SP.UI.ModalDialog.showModalDialog(options);
return false;
2. Upload the js file into Document Library.
3. Edit the list view page.
4. Edit the list web part. Go to Miscellaneous -> JS Link.
5. Add the following URL into the JS Link textbox.
~site/Shared Documents/PictureFieldTemplate.js
Result:
If you just want to show edit mode when click a picture, SharePoint provide a column “Edit” to achieve this function.If you don’t want to use the default image, we can use jQuery to change it.
Best Regards
Dennis Guo
TechNet Community Support
Maybe you are looking for
-
Get the "cannot extract embedded fonts" error message
I get the "Cannot extract embedded font 'UZNVZW+HElveticaNeueLTStd-Hv-Identity-H'. Some characters may not display or print correctly." error message when I generate a PDF from MadCap Flare or Frame Maker. I am on Windows 8 64-bit / Adobe Acrobat 11
-
EbXML 2.0 support in WLI
Hi all, Is there any information available on when (or if) "ebXML 2.0" will be supported in WLI? Thanks! Jim
-
XY graph fails even in random generated data
Hi, I have attached the Temp_test.vi and the image of the output on the screen. The vi simulates a temperature reading over long time. The plot shows the data normally, but after a while some earlier genrated points, not the current data drops to ze
-
Increase the size of list layout output of transaction vl10c.
Dear All, Is it possible to increase the size of the list output of standard transaction VL10C in printout?? Any clues would be of great help. Thanks, Aditya
-
Adaptive WebService and late binding of nodes
Hi, my Model has the folowing structure: Request -- out -- In (1..1) -- In -- Node1 (0..1) -- In -- Node1 --- MandatoryField -- In -- Node2 (0..1) -- In -- Node2 --- MandatoryField -- In -- Node3 (0..1) -- In -- Node3 --- MandatoryField At least one