Edit Template in Dynamic Conversion Admin is not working

Latest oracle UCM 10gR3 is installed with patches and Site Studio 1ogR4 on windows XP and it is running fine.
When I click on "Edit Template" button after selecting a template in Oracle Content Server >> Administration >> Dynamic Converter Admin >> Edit template nothing happens and no error message is displayed. Some times a dialog pops up with message "preparing to install template editor..". The first time I clicked on this "Edit Template" button, it has installed "Template Editor 10gR3(10.1.3.4.1) version 9.0.0" successfully and it is there in program files.
I find that Dynamic Conversion is working fine by checking in a word doc and it generates HTML. I tried this on IE6 and IE8 on two different UCM installation by enabling IE to run all ActiveX and Javascript but it did not work on either. I am logged on as admin user.
What could be the issue and how to resolve?

Hi
Check Note.941978.1 to see the possible cause of the issue and also the workaround for the same.
Thanks
Srinath

Similar Messages

Dynamic drill link is not working when i substitute some parameters in Plus

Hi Gurus,
Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
Thanks & Regards
Vikram

Hi Vikram
Oh gosh, me and my big mouth!
Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
Hope this helps
Regards
Michael

Visual admin tool not working

hii guys,
in my netweaver system visula admin tool not working .when ever im trying to connect with user id and password its showing like this.how can i solve this issue.plz help me

Hi,
Try to login to system info page with administrator or j2ee_admin for java and dual stack respectively to check if the password is correct.
If the password is incorrect, then check if you have any alternate admin ID. Change the administrator or j2ee_admin password, then try to login with the new password. Change the password of SDM and securestore to the new one.
If this is not the case, then check the log files in visual admin directory. Please post the same.
Cheers...,
Raghu

The ADOBE conversion program is not working.

The ADOBE conversion program is not working, and I purchased a new computer. How do I transfer it?

You do not neet to transfer anything to your new computer.
Only thing you need to do is to download Adobe Reader XI from www.adobe.com if you use our service via Reader rather than web ui at https://cloud.acrobat.com(login (log in with your Adobe ID and password).
Please let me know if you cannot login to the above site.
Thank you.
Hisami

Setting a New Default "Output To" Template in the Render Que Does Not Work

I'm trying to change the default "Output To" template in the Render Que to not show the timecode for a PSD file, but when I change the default template by clicking on "Custom" from the dropdown menu and using the checkbox to set a preset as the default in the "File Name and Location Template", nothing changes. The next PSD item I add to the render que still uses the previous template (i.e. it adds the Frame) and doesn't honor the new default I just set.
Just submitted a bug report, as well.
Using AE 2014.1.1 (13.1.1.3)
Windows 8.1 Pro

I'm not surprised either of you is having problems creating a new output module and making it the default. That's not where you do it.
Go to Edit>Templates>Output Module. Make a new one. Select one to use as a default. Select a different one if you want a different default. You can have a default for both stills and movies. You can do the same thing for Render Settings. It's the same basic drill.
Since this is basic AE 101-type stuff, I bet you'd get a lot out of these how-to's from the pros:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

IRR dynamic action filter does not work when condition set.

Hi All
I've set up a filter on an Interactive report using a dynamic action. The fiilter is used to display records that expire within a term ( example 30,60,90 days.) The dynamic action is set to fire On Change. This all works fine as long as I do not set the report condition to only display when P1_DAYS is not null.
I am using a report template that includes #REGION_STATIC_ID# as referenced in this post -
http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html
I hoped not to display a blank report region .. wait until after the user selects the "term" before displaying the results. Any workaround suggestions would be appreciated.
Version -
Application Express 4.0.1.00.03
Thanks
MO

Kindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

Resetting admin account not working

I tried to update an application and was told I need to be logged on as administrator. I followed http://docs.info.apple.com/article.html?artnum=306876, but it did not work. I was able to log in a root and when I selected my user account to check "allow user to administer this computer" it was already checked. My account is noted as an Admin account and the the box is checked, but it still isn't working....
Message was edited by: JayS

Thanks for the suggestions. I changed my account password and repaired the keychain as you described. Unfortunately, it still isn't working. I installed software for my digital camera off of disc, and I am trying to update the program within the program itself. A window continues to pop up stating that I need to log on as an administrator to do an update. My account is listed as an administrator account....
Any other thoughts would be appreciated.
Thanks again.

Dynamic Selection on report not working

Dear all,
I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
Is there some configuration to make to this report so that the dynamic selection works?
Thanks for ur help.
Nas

Also Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks

Dynamic Action on item not working in APEX 4.2.1

Created Dynamic action on item(Radio based on LOV) to show/ hide other items (event is Change). But its not working. I mean nothing happening onchange ..

Based on the Radio item value "a" (Y/N) i am showing or hiding items b and c. All these items are in same region.
Output seen : By default all the items are displayed and no action on changing the value of the radio item a.

Dynamic selection in s_alr_87012079 not working.

Dear All,
Dynamic selection for Standard FI report S_ALR_87012079 seems not working properly. When users here are specifying period range in dynamic selection , all the data is being fetched.
I searched the forum and found the following link , but its unanswered.
[Dynamic Selection in S_ALR_87012079;
Do i need to copy the program and do any customized coding or any other options.
Thanks n regards,
Sij.

Hi Sij,
1) Go t se36 and before that you have t get logical database name 2) From there go to menu and check the views 3) Take the view and click on chnage 4) Get the exact node which one you need and check the fields .In the same way you can add function groups also and then save.This is did for s_alr_87011990 report with custom fields.You can try and see.
Regards,
Madhu.

Oracle ses Admin password not working

Hi,
The ip address of my machine has changed. So, the admin and search pages were not opening up since they have old ip address.
So I went to the files and changed all the occurences of old ip with new one. I was not able to change it in .dbf and .lock files.
After that, when I try to login through admin page, the password is not working.
Getting "Login failed. Check the log file for more information." Which log file to check for?
Please suggest some workaround.
Thanks,
Shyamala

The log file is the oc4j log file in $SES_HOME/oc4j/j2ee/OC4J_SEARCH/log. See more info here.
Is this Windows? Before installation, you should have set up a loopback network adapter, as per the install guide. The setup would then have been immune to changes in IP address.
If the server name is hard coded into the various config files, it's easy enough to add an entry to the HOSTS file.
For example have a look in %ORACLE_HOME%\network\admin\listener.ora. You might find a line
(ADDRESS = (PROTOCOL = TCP)(HOST = DHCP_HOST_12345)(PORT = 1521))
This means the machines host name was supplied by DHCP and is no longer valid. If so simply make an entry in your hosts file
(C:\Windows\System32\drivers\etc\hosts or /etc/hosts) which looks like
127.0.0.1 dhcp_host_12345
That will force it to loop back to the local machine for all references to dhcp_host_12345
If you've actually got hard-coded IP addresses in the config file, things are a little harder. See what's in the oc4j log file and I might be able to suggest how to continue.

Manufacturing-admin still not working

Hi everyone!
I had no problem in getting SQL Trace up and running on my local Netweaver instance. However now I'm stuck getting SQL Trace running on our test machine. I followed the instructions given in the respective documents as well as the ones given in thread [http://localhost:50000/manufacturing-admin/ not working |http://localhost:50000/manufacturing-admin/ not working ] - yet it won't work. In ICM Monitor the status of HTTPS protocol is inactive.
What might I be missing? Thanks for hints on solving this issue.

Hi Juliane,
There are a lot of SAP Cryptographic libraries available from Service Marketplace, but it's tricky to find them:
1. Login to the Service Marketplace
2. Navigate to Software Downloads - > Installations and Upgrades
3. In the download catalog find the link SAP Cryptographic Software
4. Click the same link once again and in the popup window agree to the terms
5. Browse the list of all available cryptographic libraries and download the one suitable for you software/hardware config
There are just three different libraries for Microsoft Windows:
1. SAP Cryptographic Library Microsoft Win32 for x86/IA32 3342 08/06/2010
2. SAP Cryptographic Library Microsoft Win64 for IA64 (Itanium) 3342 08/06/2010
3. SAP Cryptographic Library Microsoft Windows 2003 for x86_64 3342 08/06/2010
You probably need the first one
Let us know if it helps
Good luck
Ivan

The editing "Guided" mode of Photoshop Elements 11 not works!

Using the editing "Guided" mode of Photoshop Elements 11 the working progress line hangs at 75% and Guided mode not works ! The "Quick" and "Expert" mode, instead, working well.
Attention, please! I specify that I use Mac OS X Lion 10.7.5 and I don't have AntiVirus or Firewall actived... I have already tried to delete all Preferences, all Elements 11 cache folders, etc., tried to uninstall and re-install the Software... but without success. I hope that you can help me.

About the editing Guided mode of Photoshop Elements not working.
My FINAL solution to the problem. (But I hope also for an Adobe intelligent patch...)
I finally understand why the the "Welcome screen..." and the IMPORTANT editing "Guided" did not work in Photoshop Elements 11 (or with Photoshop Elements 10); the "Guided" panel does not appear with the options but, on the right, the progress bar hangs at 75% of the options panel and the panel remains empty.
After days of hard work and after many attempts on the Adobe Troubleshooting, I realized that the problem depends by Mac OS X anti-malware functions (XProtect process). But I have not figured out why the issue did not showed running PSE into a new account; maybe, it is because Mac OS X still not intercepted always and blocked the old Flash Player plug-in, installed by PSE11. Examining System Preferences and Security Panel -> Advanced, you see the option that enables automatic control by Mac OS X for the Malware black-list.
As may be seen in the attached screeshot, if you open with XCode or with a text editor the file "/System/Library/CoreServices/CoreTypes.bundle/ Contents/Resources/XProtect.meta.plist" you can read that Mac OS X (from 10.6 Snow Leopard) inserted the old versions of Flash Player plug-in (minor of "11.3.300.271") into the black list plug-ins, to block they.
I do not understand why Adobe has left this obsolete "Flash Player.bundled" plug-in in Photoshop Elements 11 or 10! PSE11, in fact, does not use the "Flash Player.bundle" plug-in but it uses "AdobeSWFL.bundle", contained into "System_Disk/Library/Application Support/Adobe/APE/3.101/adbeapecore.framework/Versions/A/Resources/". Does maybe Adobe ignores, perhaps, the existence of a BlackList in Mac OS X that blocks the Flash Player plug-in prior to version 11.3.300.271? ... Is that really useful to install this obsolete Plug-In (for Mac OS X 10.4 - 10.5) if PSE11 works from version 10.6 "Snow Leopard" onwards?
The Flash Player plug-in installed by PSE11 is the old version "10.1.82.73" as you can read in it info.plist file (or in my screenshot attached here) and I think that if you use Mac OS X Lion or Mountain Lion you can delete it because, as we read in his file "Info.plist", the plug-in is only for Mac OS X 10.4 or 10.5 ...
An hypothesis about the occasional occur of issue about "Guided" mode or "Welcome screen" not working is that PSE11, at start-up, makes a "program's call" to the old "Flash Player" plug-in installed by PSE11 and PSE10 and the system, peraphs, intercept this call through "xprotect" process that runs in the background; so, Mac OS X blocks the function of PSE11 based on Flash Player as, indeed, the "Welcome screen" and the editing function "Guided".
Or the problem lies in a behavior of PSE at startup that it due to old ACL permissions existing into Home's folders (because belong the previous Mac OS X 10.5 - 10.6 version). PSE thinks of having to boot the old Flash Player plug-in containded in APE. This would explain why PSE runs well and "Guided "PSE mode works if start-up creating a new account!
Note! Utility Disc does not correct, by default, the ACL permission in Home!!! Adobe, then, rather than suggesting to create new accounts ... must correct PSE by removing any reference to the old Flash Player plug-in. Otherwise, there is always the risk that Mac OS X prevents proper operation.
I tried to rename it or remove this plug-in and PSE11 always work well, but for pedantry, I preferred this solution:
- I installed the latest version of Flash Player from the Adobe site.
- I opened the package to "/ Library / Internet \ Plug-Ins/Flash \ Player.plugin/Contents/PlugIns/FlashPlayer-10.6.plugin/Contents /"
- I copied the four objects (Folder MacOS and Resources folder and files: info.plist and version.plist)
and
glued them in "Adobe/APE/3.101/adbeapecore.framework/Versions/A/Resources/Flash Player.plugin / Contents /" overwriting existing ones.
I have one more doubt left: I have not yet enabled the iCloud option for the Photo Streaming and the iTunes Match sync; this functionalities was enabled in my old account when PSE did not working.. I hope that PSE11 will work well even when I will enable these features to sync with my Apple accounts...
See the Mac OS X Plug-In Black List
Message was edited by: Dottor Vincenzo 2012/12/07 - 9:38:00

Router Reset and Admin/PW Not working

I'm trying to get to my router through my webbrowser. I put in the address and it asked for my username and password. I left the name blank and tried "admin" as the password but it didn't work.
I tried a whole bunch of different things after that: admin/pw/password/blank and all in different varriations. But still no luck.
I read on the forums here that I shoudl reset my router, so I held in the button for 30 seconds and it reset. I know it did becuase for my computer to get an internet connection it no longer needs the encryption that the router used to have.
Since the router was reset, I went back and tried 'admin' as the password, but it STILL did not work.
Anyone have advice?

Try disabling ALL software firewalls, antivirus software and any Proxy cache settings you have in your Web browsers
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

Admin Applets not working

Hi ,
i installed content server 11.1.1.3 on windows7 32 bit on oracle using rcu 11.1.1.3. The admin applets were working fine just after installation. But later i re-installed oracle database, created schemas with rcu 11.1.1.4, and updated java version to 1.6.0_21 from 1.6.0_18. Now the admin applets are not working. Instead of applet link i am getting Text with large font and links are not working. Can you please tell what is the possible reason.
thanks

Hi fscherpe,
Thanks for reply. I installed the java plugin 1.6.0_26 in mozilla and applets are working fine now. But i am surprised why it was not working for update 26 ad-ons in IE however now its working fine in IE as well.
Thanks

Edit Template in Dynamic Conversion Admin is not working

Similar Messages

Maybe you are looking for