Edit the name of schema after copying

Hi
Can we edit the name of schema after copying
Rx
HI
user do you really have issue regarding it
Edited by: Moderator

Hi,
If you want change the name of key figures, see this answer i thread :
how to change the description
You can enter element data to modify the description.
Warning : if you change this element data, all program displays the new description.
Another solution : use this extension MCR00002 to modify description for key figures.
Or create flexible analysis (Tcode MCSA) in ref to S001 (evaluation structure). In this analysis, you can add new key figures by using formula (in ref to std key figures like Bill. doc: PS 5 = S001-UMKZWI5).
Regards,
Lionel

Similar Messages

T-code to edit the name of company

T-code to edit the name of company-
I have a smartform which picks the name of a company. But it is too long.
I want to edit the company name so that is is shown in the form.

Hi Malvika,
if company name is too big than you can use split command in your code to split company name and display in smartform.
Examples
DATA: NAMES(30) TYPE C VALUE 'Charly, John , Peter',
NAMES2 TYPE STRING,
ONE(10) TYPE C,
TWO(10) TYPE C,
THREE TYPE STRING,
FOUR(4) TYPE C VALUE 'FOUR',
DELIMITER(2) VALUE ','.
SPLIT NAMES AT DELIMITER INTO ONE TWO.
ONE contains 'Charly' and TWO contains 'John , Pet'.
SY-SUBRC is 4, because TWO was not large enough to
accommodate the whole of the remaining string
SPLIT NAMES AT ',' INTO ONE TWO THREE.
ONE contains 'Charly', TWO contains ' John',
THREE contains ' Peter'.
SPLIT NAMES AT ', ' INTO ONE THREE TWO.
ONE contains 'Charly', THREE contains 'John',
TWO contains 'Peter'.
CONCATENATE NAMES '' INTO NAMES2 SEPARATED BY SPACE.
SPLIT NAMES2 AT DELIMITER INTO ONE TWO THREE FOUR.
ONE contains 'Charly', TWO contains 'John',
THREE contains 'Peter ', FOUR is empty.
SPLIT NAMES2 AT DELIMITER INTO ONE FOUR THREE.
ONE contains 'Charly', FOUR contains 'John',
THREE contains 'Peter', SY-SUBRC is 4, since
FOUR was not large enough (spaces are significant
characters!)
Thanks
Ankur Sharma

How do I edit the name of a Bookmarks Toolbar folder?

I want to change the name of a folder in my Bookmarks Toolbar. I tried opening the 'show all bookmarks', then clicking Bookmarks Toolbar, and then clicking once on the present name with hopes it would allow me to edit it. But it didn't work.

You need to open the Bookmarks Toolbar folder in the left pane in the Library.<br />
Then you can select (highlight) that folder in the right pane and edit the name in the Details pane at the bottom of the right pane.
* [[How do I use bookmarks?]]

Can you edit the name showing on Friends list?

My Apple Watch defaulted my Friends to be the top 12 favorites from my phone. The problem is my first three contacts are spouse home, spouse work, spouse mobile. On the watch all you see is Spouse, Spouse, Spouse with no idea which goes to witch number. Is there anyway to edit the names so they show on the Watch differently? Otherwise I'm calling the wrong phone or texting a landline accidently. I'm using my Apple Watch with my iPhone 5s running iOS 8.3.

Yeah, that's kinda annoying. I guess the Watch assumes I am only ever calling someone's mobile number. In fact the Friends in the watch do not seem to be linked to the contact. The friends area is very weird and not overly integrated.

Is there any T-code in which we edit the name of our company?

Is there any T-code in which we edit the name of our company?
Actually what a prob. is i made a smartforms in which i pick the name of may comany but its too long so i want to edit my company name so that the databse pick the name & its shown in the form.
The table is ADRC in which the company name is shown.
Thanks,
Sumit.

Hi,
you want to display VARDHMAN POLYTEX LTD-Unit 2 Expansion as VPL- Unit 2 Expansion. in output.
For every Adress number you have option of NAME1 and NAME2.
NAME1 : VARDHMAN POLYTEX LTD-Unit 2 Expansion
NAME2 : VPL- Unit 2 Expansion.
If you are taking company code name in your samrtform. Ask your functional consultant to maintain NAME2 in company code address.
T.code for company code OX02.
Regards,
Chandra
Edited by: chandra sekhar S on Oct 8, 2008 1:18 PM

Want to edit the name of the std. key figure

Dear All,
I want to edit the name of the key figure from the standard s001 info structure. I aslo want to add new key figure as High edu cess in my MCTA. I am working in mfg. co. where as we are compairing our sales register with mcta report but in mcta report high edu cess is not coming.
while compairing with sales register the name of the filed is not matching with mcta key figure for example
1) billing doc. ps5 = tax amt.
2) Net inv. SIS2 = BED (excise duty)
now I want to edit the name of net inv. SIS2 as excise duty (bed charges).
I need help in this case.
Nikhil

Hi,
If you want change the name of key figures, see this answer i thread :
how to change the description
You can enter element data to modify the description.
Warning : if you change this element data, all program displays the new description.
Another solution : use this extension MCR00002 to modify description for key figures.
Or create flexible analysis (Tcode MCSA) in ref to S001 (evaluation structure). In this analysis, you can add new key figures by using formula (in ref to std key figures like Bill. doc: PS 5 = S001-UMKZWI5).
Regards,
Lionel

HT204053 support states you can't merge apple ids, but it does give you an option to edit. Im sure there's a reason, but why can't I sign in to 1 account and edit the name to match the 2nd account?

support states you can't merge apple ids, but it does give you an option to edit. Im sure there's a reason, but why can't I sign in to 1 account and edit the name to match the 2nd account?

Shelady wrote:
... (wasn't even aware my gmail account had anything to do with Microsoft) ...
It doesn't. Gmail is owned by Google.
Shelady wrote:
Also can someone tell me how I report spam on my iPhone and iPad in a gmail account?
Report it to Google:

Is there anyway to edit the names of the Variables/Tags listed in the .IAK file

I have an .IAK file that has several (about 130) different fieldpoint devices in it and each device has about 90 variables names listed. I have modified all the names in order to shorten them and standardize/nomalize the variable names. I would like to be able to just rename the variables in the IAK file, instead of going to each device, connect, 'find devices' in MAX, Save the IAK File (which takes about 10min each) and then drive to the next device and repeat the process 130 times. I've seen programs that let you view the IAK file, just wondering if the IAK can be edited programmatically.

The reason is the IAK file has ALL 130+ fieldpoint devices listed, with approx 85 tags per FP, and I have to get the tag information from each site, then I have to copy that file to the server and reload the server. If (like what happened yesterday) there is a problem saving the .IAK file or the .IAK file gets corrupted, I have to go back to ALL 130+ FP devices and get the information again. Also, with that many FP stations in the IAK file, it takes a considerable amount of time per save (approx 10min). On the server, I get the data from these FP devices through OPC that uses the .IAK file. It's really not an idea situation, but it's what I have to work with.
If it can't be done, it can't be done. I would think that the file has to be saved in some format, granted probably some proprietary NI format, but if I knew the format, I could write a program to edit it, unless it's also compressed in some propritary NI format.

Cannot edit chapter names in iDVD after importing movie from iMovie

I have no trouble customizing iDVD (version 5.0.1) menu page after importing iMovie directly (instead of going to QT as interim step). But the names of the chapter markers are file names for video clips, title pages and transitions. The iMovie help says to change the names in the space next to the 'thumbnails' of chapters found in iDVD. THERE ARE NO THUMBNAILS. And there is no way I could find, using menu options or clicking on the chapter frames shown in 'map' mode to type in anything.
There are other problems, like getting rid of the default "Travel Cards' stuff...like I can drop a still photo in for a custom background, but the default 'celluloid design' banner still rolls up in previw mode. If you can also help with that, great. But the main thing right now is getting these chapter names change.

VJK,
You are the third person who has taken a crack at this. I don't know if you read my last reply which detailed the situation. But if you did and the 'menu' you refer to is the main menu page, that is not the problem; I can change text there. I am talking about the submenu for 'Scene Selections', which I have only been able to access via map mode.
In map mode I cannot highlight the names. Period. Can't do it no matter where I place the cursor or carefully click.
In preview mode, when the Scene Selection sub-menu page appears whenever you drag the cursor over a chapter name it automatically highlights so any clicking will either do nothing (if a real careful click, trying to highlight text and not trigger off play of the movie chapter) or just start play for the movie chapter.
So...how does this newbie get to the 'menu' you mention where I can click on a chapter name in order to type new text?
You will be able to change the names in the menu, but
depending upon your mouse, etc, it can be a little
particular.
Place the cursor at the very beginning of the word
you want to change. Click once .. this should hi-lite
the word. Click again, it should make the word go
blue (or in a blue box) then you can delete and
re-type.
Be sure to save the proj
I have found that even after saving and successfully
burning the project, if I return to it later the
changes seem to have gone away ... so if you go back
to it later, just double check that everything is
kosher

When I import new home videos into my iTunes and edit the names it creates duplicate Library's on my Apple Tv. How can I stop this from happening each time I edit a name in iTunes home videos??

I am having an issue with duplicate Libraries showing up in my Home Sharing "Home Videos". It happens when I import home videos into iTunes and change the names of the files. How do I avoid this from happening and delete the duplicate libraries?

The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
tt2
Message was edited by: turingtest2

How do you edit the names that come up when you compose a new message?

i open mail and hit 'new message'.
then i click in the 'To' row and start to type a name.
it autofills names for me as i type, but where does it get the names from? and how can i edit that list ?
- e.g. my wife has changed her e-mail address. i already changed it in my address book. but the old address still appears...?
i've tried scrolling down to it so it goes blue, then hitting the delete key (like on a pc). no joy.
any advice?!
thanks in advance
paul

Hi it's probably appearing from your Previous Recipients List...
In Mail Click on Window... Select and Click on Previous Recipients...
Click on and Delete the Names and Addresses you no longer want...
Cheers,

Not able to edit the Debit memo request after cancelling Billing document

Hi,
This is a process in SD/Customer service.The issue is even after cancelling the billing document we are not able to edit the item details in debit memo request..Pls suggest how we can edit the item details after cancelling the billing document
Best Regards
Jay

Hi Jay,
Yes, the whole sales document could not be deleted as well.
Sorry for the misleading answer.
As per the long text of error V1006, the document cannot be completely
deleted because further processing has already taken place. Even though
you have cancelled the subsequent documents, if you refer to the
document flow, the subsequent documents might have already been created
The cancellation of these does not delete the request.
Please have a look at table VBFA in transaction SE16 and you can see
that the subsequence documents are still displayed.
What you can do is to enter a reason of rejection for all items to
prevent further processing of the request.
Please refer to Note 147028, you don't need to apply
this note, please refer to part of "NOTE:...".This is a restriction
of the system.
For order-related billing, it is not possible to delete the sales
document, even if the subsequent invoice has been cancelled.
You have to reject the items.
Cheers,
Alex

What are the names of schemas ?

I installed the oracle 8i and then removed the users (system,scott) .... and then create another user ...... but the problem that I forget the name of that user that I created it ...... and I can't remember it ....... so can anyone tell me the way that I can find the names of all schemas that I have in my Database ?

select * from all_users;

I need to change the name of Schema in the Insert command by using variable

Hi
I need to write a code to populate 450 schemas having same table names and also specify the columns needed to be inserted. for that i am trying to make the Schema Name a variable and put the whole statement in a loop to change the name of the Schema. its not working can any one guide me in this..Thae sample of my insert statement is
INSERT INTO A01.tablename
In this the "A" is constant and 01 is being changed to 02...450..
Thanks

Not sure to completely understand your need, but assuming that column names and values to be inserted are the same for all schemas, here a short example :
SQL> desc a001.test
Name                                      Null?    Type
A                                                  NUMBER
B                                                  VARCHAR2(10)
SQL> desc a002.test
Name                                      Null?    Type
A                                                  NUMBER
B                                                  VARCHAR2(10)
SQL> desc a003.test
Name                                      Null?    Type
A                                                  NUMBER
B                                                  VARCHAR2(10)
SQL> declare
2     i       number;
3     str     varchar2(100);
4 begin
5     for i in 1..3 loop
6             str := 'insert into a'||lpad(i,3,'0')||'.test(a,b) values(1,'||chr(39)||'ABC'||chr(39)||')';
7             execute immediate (str);
8     end loop;
9     commit;
10* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> select * from a001.test;
         A B
         1 ABC
SQL> select * from a002.test;
         A B
         1 ABC
SQL> select * from a003.test;
         A B
         1 ABC
SQL>

Unable to edit the cells of tables after dinamically adding the rows

below is the code that dynamically add the rows to a table.But when i try to edit the table otherthan boolean cell are throwing ClassCastException.
please correct the code
//code is this
public RowTable()
colname.addElement("Name");
colname.addElement("Education");
colname.addElement("Age");
colname.addElement("Pass");
Vector v1=new Vector();
v1.addElement("Nagaraju");
v1.addElement("MS");
v1.addElement(new Integer(24));
v1.addElement(new Boolean(true));
Vector v2=new Vector();
v2.addElement("Mahesh");
v2.addElement("MS");
v2.addElement(new Integer(24));
v2.addElement(new Boolean(true));
data.addElement(v1);
data.addElement(v2);
tm=new TabModel();
JTable table=new JTable(tm);
table.setPreferredScrollableViewportSize(new Dimension(500,70));
JScrollPane jpane=new JScrollPane(table);
jb.addActionListener(this);
getContentPane().add(jpane,BorderLayout.CENTER);
getContentPane().add(jb,BorderLayout.WEST);
class TabModel extends AbstractTableModel
public void addrow()
Vector v1=new Vector();
v1.add("Hari");
v1.add("BHMS");
v1.add(new Integer(24));
v1.add(new Boolean(true));
data.addElement(v1);
fireTableDataChanged();
public int getColumnCount()throws ClassCastException
return ((Vector)data.elementAt(0)).size();
public int getRowCount() {
return data.size();
public Object getValueAt(int row,int col)
return ((Vector)data.elementAt(row)).elementAt(col);
public Class getColumnClass(int c)
return getValueAt(0,c).getClass();
public boolean isCellEditable(int row,int col)
//Class columnClass=getColumnClass(col);
// return columnClass!=String.class && columnClass!=Integer.class;
return true;
public void setValueAt(Object value, int row, int col)
((Vector)data.elementAt(row)).add(col,value);
fireTableCellUpdated(row,col);
public void actionPerformed(ActionEvent ae)
tm.addrow();

The problem here is that you are using the same column for multiple different kinds of Objects. JTable expects that all Objects in a column are of the same Class the since the default CellRenderer is based on JLabel the default column class is String (I believe).
One way to fix this problem is to convert the Object to a string before displaying them. This would be done in your getValueAt() method...
return ((Vector)data.elementAt(row)).elementAt(col).toString();
I believe that you can also designate the column class (in getColumnClass() of your TableModel) as Object and build a custom cell editor to translate for you but in the end this would probably be the same as the solution above only with more work and obfuscation.

Edit the name of schema after copying

Similar Messages

Maybe you are looking for