Edit to Tape error

I'm having an error of: "Unable to open the specified Video Output device" when trying to assemble to my DV camcorder. I have been able to use this feature before. I'm able to control my camcorder using the Edit to Tape window and set the in point. I know I can bypass this problem by Printing to Tape, but I want my sequence to start at a specific time, and I want to lay down black, bars and title beforehand.
Any help is appreciated,
reicko†

Could be the tape... the error message is saying that it can't read the timecode in effect... tried another tape?
If it fails again, could be the camera needs a cleaning or adjustment. If the recording isn't exactly right, you'll see TC errors then worse...
If it were some sort of software bug, we'd all see the problem...
Just for kicks you could try trashing prefs, but if all else seems to be OK, then it's more likely the tape or the camera. Cleaning cassette?
Jerry

Similar Messages

Insert Edit to Tape Error

Having a problem with the insert function of edit to tape. I lay a program off to beta tape using the Edit to tape mode. Of course, I'll find a mistake in the program and try to insert a correction. Sometimes it works fine. Other times I get the following error code:
"The deck may be unable to perform the edit since the duration is only 1 frame."
The video I'm trying to insert certainly doesn't have a duration of 1 frame. The edit to tape window has an "In" marked, but no out so there is no duration in that window either. No amount of restarting the program, computer, deck or AJA will correct this.
What in world is going on, and how do I fix it?
G5 Mac OS X (10.3.5)

FCP Rescue "trashes" your existing preferences. It also can save your preferences when you know them to be in an uncorrupted state, so the next time you have any problems, you can restore your backup preferences as opposed to trashing them.
Repairing preferences is an activity performed by /Applications/Utilities/Disk Utility.app and should be done on a regular basis... Crank up that program and it should be pretty self explanatory.
Patrick

Help urgently needed with edit to tape / print to video error

I have tried to edit to tape and print to video a sequence (0my whole project, worked for way too many nights to let go... so frustrated and sad right now because it doesn't work.
The project is saved on an extern harddisk, my harddrive on teh pc is too full (not big enough).
My camera and FCP connects but all the time I get an error that 'the tape may be locked' . AND I HAVE TRIED WITH DIFFERENT TAPES, none of them were locked!
I am not really sure how to set the camera in this VTR mode... I have tried in the settings to set it in webcam mode... and I have tried without... and I dont have a button or setting called VTR, only a *PLAY' option or a 'FILMØ option....
My A/V settings are FireWire PAL and DA PAL 48khz ... however have no ide what that means or if these should be changed...?
I checked from apple but cannot find my DV cam on the list... hmm, does that mean I cannot do edit to tape recordings???
My Dv cams informations:
NV-GS140 by Panasonic, Model 0x80330B, 0x804580114B5DD1
I checked the system settings and was able to the FireWire/NV-GS140 Unit
I have a MacBook1,1 / Intel Core Duo/ 2 GHz
OS 10.4.11
I use the version FCP 2
Please help me out, I am really without any good suggestions how to proceed!

You're going to have to use a dvd authoring program. Burning the seq to a dvd qill just create a qt movie on a dvd data disc. It won't create a dvd video disc that plays in a dvd player.
Export from fcp a QT movie, current settings, self-contained. Use Anamorphicizer (http://mac.softpedia.com/get/Video/Anamorphicizer.shtml) to make imovie recognise it as 16:9. Then import that file to idvd.
Or you can drop your 16:9 sequence into a new 4:3 sequence to letterbox it, then you can do the export as above but skip the anamorphicizer step.
It's better to use compressor on the original 16:9 sequence and then use dvdsp to author, but if you've never used dvdsp it's a big program to get your head round.
The export can be done in two ways;
1. Export from fcp using 'export using compressor'.
2. Export a QT ref/self-contained movie and import that into compressor.
3. Export a QT movie and import it direct into DVDSP.
The second option will take longer initially (if you use the self-contained option) but will then allow compressor to work in the background, the first option will tie up fcp for the duration of the encode.
Once in compressor use one of the 16:9 dvd presets, depending on the duration of the movie and the quality you want. Don't try to adjust the settings. If your movie is 31 mins just use the shortest option (i think it's 60min) and make sure you select the m2v video and ac3 audio options. If you just select the mpeg 2 video you'll only get video, as you've discovered.
Open dvdsp and create your opening menu and a video track, import the movie file, add it to the video track, and then add the audio to the track as well. Then add any chapter submenus you may want.

Edit to Tape... intermitant error with start T/C

Having a problem using assemble & insert edit.. when outputting using Edit to Tape with a start T/C at 01:00:00:00, the first frame often starts at 00:59:59:24 (PAL so that's one frame early).. doesn't happen all the time, but enough to be really annoying...
Am using a KONA LS video card with a black burst generator. First noticed the problem years ago with a DSR11 outputting to DVCAM and assumed it was probably an issue with the DVCAM deck being useless, but this is happening with a DVW500.. so it's rather annoying as it causes all sorts of problems with audio finish etc.

timecode needs to be set to internal regen after you preset and stripe about 10 seconds ahead of your sequence start time. so if you need to start bars at 58;30;00 start stripe at 58;20;00 and go past 58;30;00. then do your assemble with deck set to internal regen.
FCP does not output TC

Edit to tape... Cannot Assemble...

Hi, I am trying to edit a 30sec commercial spot to tape to get it to the local cable company ASAP. I have a Powermac G5 outputting to a Multibridge extreme, controling a Panasonic AJ-D455 DVCPro deck. I have the timeline all set to export but when I drag it over to the Edit to Tape window, all options (insert, assemble, preview) are grayed out. Please help me.
Thanks
Paul

First of all, why not go out Firewire? That will keep the output a digital copy of your timeline.
If you insist on using the Decklink, make sure your settings are correct (device settings) - you should be able to control the deck prior to output. Do you get an error message when you click the black tape button?
Patrick

"Out of Memory" - need to "edit to tape"

I deleted my render files on my current sequence and am hoping that it works - but can anyone tell me if there is a fix for the "out of memory" error - It is not a capture scratch disc space issue or a ram issue... I have rebooted the computer / the app/ switched computers / saved the project to the desktop / rendered in little chunks....
if this re-render of the files doesn't work... im stumped...
any advice??
dual2.66 macpro Mac OS X (10.4.9)

Compression settings error...assume you are using the buttons on the edit to tape screen...
From the web...
“The error message can appear because the Assemble, Insert or Preview buttons refer to whatever is currently loaded into the Viewer window. If there is a Color Matte, Slug, Bars & Tone, or any generated media element currently loaded in the Viewer window, no specific compression settings are applied and Final Cut Pro cannot proceed.
If you are using these generated media elements, they need to be placed into a sequence before they will acquire their specific compression attributes. You can then load the sequence into the Viewer window and use Assemble, Edit, or Preview buttons.
It is probably simpler, however, to simply drag the Sequence icon from the Browser directly to the Assemble, Insert or Preview overlay areas on the right side of the Edit to Tape Window. This saves the additional step of initially loading the Sequence to the Viewer.”

HV20 and Print to Video or Edit to Tape?

Has anyone figured out the workflow for final cut pro and getting video back out to tape using
"print to video"
or
"edit to tape"
with "edit to tape" I get an "unable to initialize" error where it tells me to check the audio/video settings.
with "print to video"
I'm using the record/pause function from page 71 of the manual, but the hv20 doesn't see to see a signal. Also the playback on the mac is interesting. it's in the middle of the screen, and not showing the full resolution..
basically I'm just trying to dub an hdv tape.
thanks!
-Josh

ok, the only things listed in the audio/video settings are the ntsc and pal firewire devices.
when I try to set it to hdv 1080i60 firewire basic, I get the error:
unable to locate the following external devices:
HDV (1440 x 1080) 60i
but the camera is both connected... and on. Is there a reason it would see the camera as an SD device instead of a HD device?

Help...Edit to tape?? Not working...

Hey all...
I'm trying to output my timeline through Firewire to my DV/DVCam firewire deck.
Everytime I try, FCP comes back with " Incompatable Compression settings..." yada yada..
Have to start at a precise timecode but FCP won't output.
My settings are DV NTSC, video playback and Audio are both Apple Firewire and FireWire DV repectively, and in the A/V device tab playback is on firewire. I also tried checking the "Different Output for edit to tape...." and set it to firewire also.
Still keep getting this error.
FCP will Print to Video but that leaves a second or so offset from the timeline on the tape.
The tape has to match the recorder.
Any Ideas?
Thanks in Advance.
-Rob
Message was edited by: RBedit

There's this SimpleViodeoOut program that can lay back DV-stream with timecode on tape.
It's on apple's Developers sites.
http://developer.apple.com/mac/library/samplecode/SimpleVideoOut/index.html
•Download the SampleViodeoOut Sample Code.
•Open the downloaded SimpleVideoOut.Zip
•In the SimpleVideoOut-folder that comes up, double click on the SimpleVideoOut.sit.
• An new 'SimpleVideoOut Folder' comes up. In there you'll find a SimpleVideoOut for OSX version.
Well: First export your sequence from the FCP timeline (Make sure the timeline has the Timecode you desire). Export as Self Contained movie, as DV.
Open Simple VideoOut and drag your movie in the required box...
Everything runs automaticcally from there... (Starting to record on the beginning of your tape...)
Rienk

Edited on MacPro, needs to Write Video to Edit-to-Tape on PowerMac G5?

Anyone else run into this issue?
I edit programs for broadcast on my MacPro at home (same version & settings as Final Cut software on systems at the office). Everything right up through rendering is done on my home system.
I bring it in via G-raid(firewire800) to one of the office systems with decks for printing, both of which are PowerMac G5s.
Open project - timelines look/play rendered as they did when I finished them at home.
Edit to Tape - after I drag/drop the sequence to Insert in the Edit-to-Tape window, Final Cut then proceeds to "write video" for at least 45 minutes as if it's re-rendering the entire sequence.
Through a TON of elimination & troubleshooting, we discovered this error is consistent when our other MacPro in the office gets the same result when an edited/rendered sequence from it is brought over to the G5s.
What are your thoughts?

I have often found that the rendering FCP needs to do just before an Edit to Tape to be very inconstient. I wonder if it could be writing the render to a different drive on the MacPro other that the G-Raid. I also wonder if it might be rendering to RAM for output.... I've never heard of this so it's just a theory. Do you do a Sequence > Render Only > Mixdown? Might try that. Also do a forum search for "Edit to Tape" as there are many topics on the subject.
And welcome to the forum.

'Incompatible Codec' Preventing Edit To Tape - Getting Annoyed Now!

Okay, this should be a really simple procedure - I have a 30 second TV commercial to master from the timeline to a Digibeta A500 VTR. The project is set to Blackmagic PAL 10-bit, as is the timeline and the view output. The video card (Blackmagic Decklink HD) is providing the Digibeta with an audio/video muxed SDI feed and machine control via RS422. The output of the A500 shows the Blackmagic card is feeding it pictures from the timeline just fine. Here comes the problem - on opening Edit To Tape to do a master with frame-accurate timecode FCP insists that it cannot playout the timeline as the timeline settings and the output settings are different codecs... yet the entire process is simply uncompressed 10-bit PAL. FCP suggests I re-render in a new timeline with 'the correct codec' but this doesn't help. No one here or at my system supplier can figure out what's up with the thing, I don't fancy sending out a TX master crash-recorded with a 'guesstimated' timecode track but failing that I'm screwed...
...any suggestions which miniscule and forgotten setting might be causing this?
Cheers,
Tom

Hiya - Sorry guys I should have made myself clearer. I have already been doing the drag of the timeline to the 'assemble' pop up in the ETT window and this was when the 'incompatible compression setting' error came up.
I think I have got past this issue now - it seems that the 'Blackmagic PAL 10-bit' preset is actually 5:4 aspect ratio by default which is ever so slightly different to regular 4:3 the card itself is trying to output - strangely though I get realtime playback off the timeline with this default setup but not via ETT (which annoyingly insists on spending 10 minutes 'writing video' before every master I run off - is there a way to get it to save the video file it has written for ETT output?)
It was only on the fourth attempt that I managed to get ETT to output both video and audio together - the first three attempts it only output the audio tracks. Bizarre? Lastly the timecode is off by one frame - i.e. the beginning frame of the commercial is coming in at 10:00:00:01. Could this be a dropped frame or do I need to change the pre-roll settings for ETT somewhere (can I do this?)
Cheers for your help so far guys!
Tom

FCP5 and Send back to Tape (Edit to Tape)

Help, I can't seem to figure this out.
Sony FX1, FCP 5, Firewire.
I am just brain dead, I have tried and failed.

Hi FCP Folks,
It just doesn't seem like FCP 5.0.3 and the Sony HDR-FX1 have been friends long enough to communicate well together. Capturing is no problem. But, 'Edit-To-Tape' is a no-go. Does anyone have a list of known-correct settings or any other app/camera configuration details that would let me 'Edit to tape' with my HDR-FX1?
After trying MANY different combinations of settings I can report that the error is consistently, "Not returning timecode" FCP does not complain it can't communicate with the device - but it never seeks to a place on the tape or goes into the record mode.
Should I write this up a bug?
Thanks!
Lance Drake
NOTE: The link referring to: "Michael Mackay, "FCP5 & Sony HDR-HC1 HDV Cam - Print to Video?", 02:36am Sep 16, 2005 CDT" returns a 404 - Page Not found - error - so, no help from the existing info that might have been posted.
G5 DP 2GHz Mac OS X (10.4.3) 3.5 GB, HollywoodX Dazzle, FW card - neither in play

Edit to tape audio promlem - sounds like "chorus" effect

I have tried to Edit to Tape an HDV Sequence, down converted to SD, to a Digibeta deck.
When I monitor (headphone out of digibeta deck) while recording it sounds normal. When I rewind and check tape it sounds like the audio is "doubled up", almost like a very short chorus effect is on the audio. as well as this I can hear what sounds like tape crackle now and again.
However - when I do a straight crash record from the timeline - the audio plays back fine, no crackle.
So thinking it was an edit to tape settings problem i clicked on the audio button in the edit to tape window and notice audio was set to ALL ON. I changed this to A1 and A2 on, thinking that my extra audio tracks (which I had disabled, these where the original audio, not the OMF exported stereo mix) were somehow going down the SDI anyway...
No luck - did the edit to tape again and still sounded the same.
My heart rate has returned to normal now as the network kindly will accept the crash record with non standard timecode - but I of course still want to find out the problem so this doesn't happen again next week....
The Sequence was HDV 1080i, via a Decklink HD Extreme Capture Card, set to down convert to anamorphic 16:9. Sony Digibeta DVW-A500P deck.
Anyone know what the problem could be?
thanks
Hugh

for the benefit of anyone who searches for forum for a similar problem - it appears to have been a sync issue. changing "out ref" to "input video" appears to have fixed it.

Jittery motion when editing to tape via Blackmagic SD

I have a situation that has me a bit perplexed, and I'm hoping one of you gurus can help. We will shoot DVCAM footage, capture into FCP (now at v5.03, but this occurred with earlier versions as well), and then export a quicktime movie (not using QuickTime conversion). I then bring the movie into After Effects, and do some compositing work, and render using Uncompressed 8 bit settings. I create a new sequence in FCP with matching settings (uncompressed 8 bit), and import the movie file I created in AE. Everything looks great on my computer monitor, but when I edit to tape, any moving objects (either effects or people in the video) jitter visibly when viewed on my broadcast monitor, and the resulting BetaSP tape. There are no unrendered sections of the sequence, and the the frame dominance is the same on the imported clip and the sequence.
I can apply the de-interlace filter in FCP, and that improves the image somewhat, but it's still visible.
Any suggestions?

... and the the frame dominance is the
same on the imported clip and the sequence.
it seems that the filed dominance is wrong:
upper or lower field dominace is determined by your blackmagic card and the codec used.
in your sequence settings use easy setup to load the correct settings for the codec you are using with your blackmagic card. after that, read what the field dominance is set to. use the same field dominance when rendering in AE.
good luck,
kurt

Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps.

Having trouble with audio edit to tape, print to video ok

Hi all, please go easy on me, this is my first post.
I am having difficulty getting audio on to tape via 'edit to tape'.
The hardware is blackmagic decklink extreme, feeding component video and analoge audio to a UVW-1800P.
I can do a print to video on a crash record and the audio works that way, but edit to tape does not.
I have tried both deck link and built in audio in the audio settings and the FCP a/v settings, seperate and ganged output settings, I have set the insert settings to 2 channel Sony, reloaded the decklink drivers.
The irritating thing is the audio is there whilst cutting, but as soon as I try edit to tape there is complete silence. The important thing is that it worked a few weeks back but does not now, it must be a setting?
Thanks in advance for your help.
This machine I am working with this week is an Intel MacPro running FCP 5.1.2 and Mac OS 10.4.8
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade Mac OS X (10.4.8)
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade Mac OS X (10.4.8)

I had this same problem and this resolved it for me:
-Go to your "Settings" icon and click on the "General" tab.
-About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
-Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
My audio worked fine in embedded videos after I did those two things. Hope it works for you.

Edit to Tape error

Similar Messages

Maybe you are looking for