"Edit Using"... "Edit original"...

How do I delete old versions of Creative Suite applications in the "Edit Using" dialog box of InDesign?
Ho do I set the default application that edits a file type from the "Edit Original" click option?
Thanks..

There are uninstaller for CS3 and CS4. CS2 and earlier can just be dragged to the trash.
Edit original should use whatever the O/S uses. If it's not working then try trashing your preferences. I don't know what edit using means, but if it's edit with then you still need to tell ID which application to use.
And make sure you're fully patched to 6.0.4.
Please post any follow ups to this in the InDesign forum.
Bob

Similar Messages

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error messa

I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error message that I don't need to this because it is already supported on the edit menu and task bar. I can not find any way to send images to Photoshop for editing - all I can do is send them to elements editor or the premier editor. Can someone tell me how to send them to Photoshop? Thanks!

Hi,
The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

Anomalies in CS5 when using edit original on Illustrator files from within InDesign

Using the Edit Original function to open up a placed Illustrator file from an InDesign layout, we are seeing some strange things. If the image is placed on page at 100%, after editing via Edit Original it comes back in at a different size. Sometimes it is a silly size (99.999999999% or 100.000000002%), other times 2 or 3% smaller. Is anyone else seeing this - and, if so, is there a fix?

We are also experiencing this with .psd .ai .eps .jpg files etc. etc. etc.
Example:
An image is placed in a box in InDesign, then resized and positioned. In a later stage the image needs editing, so the image is selected and we click on Edit Original. The image opens in either PS or ILL, we alter it (not sizewise, just color). Then we save it and the link in InDesign updates.
BUT
The position and the scale of the image most often CHANGES.
CS5 is soo full of bugs, it is not even funny anymore. We are slowly moving our studio back to CS3.

Can I use garage band to edit my own original music from itunes? Or can I import my own music straight from a C.D. or Flashdrive?

Can I use Garage band (garage band '11) to edit my own original music that I have stored in my itunes library? Is it even possible to edit your own music with Garage band ? And how would you import your songs into it? Any help would be appreciated, thanks.

Jeffxmusic wrote:
Can I use Garage band (garage band '11) to edit my own original music that I have stored in my itunes library?
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)

When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett N

There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

I'm considering buying CC LR/PS package. My camera is Sony a7 - raw ARW. I've been editing using PSE10 and ver 8.7 of the external Adobe DNG converter. Will I be able to open the DNG files in LR with the edits preserved? Will I be able to open the PSD fil

I'm considering buying CC LR/PS package. My camera is Sony a7 - raw ARW. I've been editing using PSE10 and ver 8.7 of the external Adobe DNG converter. Will I be able to open the DNG files in LR with the edits preserved? Will I be able to open the PSD files in LR with the edits preserved? Any import/catalog etc issues between PSE10 and LR?

Lightroom has no problem reading DNG files. Whether the edits you have done to the DNGs you have originally edited in Photoshop Elements 10 I'm not sure. ACR edits made to DNGs are saved in the DNG file itself, as apposed to a XMP sidecar file, so LR should see those edits. At the worst you will get an exclamation mark in the upper right hand corner of the imported DNGs and clicking on that exclamation mark you will get a dialog box asking you to either import settings from disk or overwrite settings. you would select import settings from disk.

How do I stop Elements 11 Organiser assuming JPG when editing using PS CS6

Hi,
I love the Elements 11 organiser but prefer to edit using PS CS6.
However, everytime I edit using PS CS6, the Elements organiser creates a JPG file.
If I save this as a PSD file, I have to manually trick Elements organiser into reconnecting to the PSD file by deleting the JPG from windows explorer and then manuall reconnecting the JPG to the PSD instead.
This is also the case if I want to just go straight into OnOne Perfect Photo Suite by setting it up as an external editing program.
Is there a way to change Elements organisers behaviour?
Thanks
Darren

I don't even need to do this as when you make changes and go to save, PS CS6 asks you to save and selects PSD by default (which I use).
The problem is the cleanup. The watch folder option will pick up the new photo but it does not associate it with the original as a version set so your window ends up getting cluttered. Also, subsequent edits generate a new file (e.g. photo-edited-2.psd) which is not nescessary when using PSDs due to the ability to turn layers on and off etc.
I am investigating Lightroom 4 and its organisational abilities and integration with PS CS6 and other plugins.
Thanks
Darren

In Premiere CS5, I opened an old project I had edited using Premiere CS3 and now its all pixelated!

Hi everyone. I just got Premiere Pro CS5 and started the program and opened up an old project I had edited using Premiere Pro CS3. Premiere Pro CS5 said it had to convert the project for editing in CS5. I clicked "okay" and the project opened up in CS5. Now, when I play the project on the timeline, everything has some pixelation! The footage was nice and sharp without any artifacts when I edited in Premiere Pro CS3. How do I get rid of this pixelation in CS5 so the footage looks like it is supposed to?! Thanks.

Well, there's really no rationale for the project conversion to somehow drastically alter the appearance of footage, particularly something like DVCPROHD. Adobe changed the way its software handles pixel aspect ratios between CS3 and CS4, but that affects SD footage, not HD footage. There may be some degree of weirdness since in CS3, you had a project that was set to a specific format/frame rate/codec/whatever, whereas in CS4 and later the project is just a container for sequences of any and all types.
Instead of opening the original project and going through the conversion, try creating a new project and importing the old project as if it were any other media file. Premiere will reconstruct the old project within the new one; this probably is not going to have any change, but it's worth a shot.
Can you describe (or better, show) the pixelation you're referring to? It's hard to visualize without, well, a visual, and that might help better pinpoint the issue. Also, is the pixelation only during playback, or is while the clip is paused in the sequence, as well?

Resolution Change When I am Using "Edit a copy with lightroom adjustment"

Hi Guys,
I am using the latest version of lightroom and I have been trying to fix the error that lightroom made.
1. I open most of my photos (resolution 300dpi) on lightroom to do some adjustment
2. I am using "Edit with photoshop CS3" to continuemy editing
okay this the problem!
I just realized that every time, I open the photos on photoshop the resolution change became 240.
I am really not sure which part of lightroom that I need to change :( because I just want to keep the original resolution when I bring it to photoshop.
Thanks

Bear in mind that there is no meaningful resolution number in an image file coming from a camera. The only truly "correct" resolution would be the number of pixels per inch on the sensor array, but that would be several thousand ppi, and your image size in inches or cm would appear to be very small -- i.e., the size of the sensor. Any other number put in there by the camera, by ACR, or by LR is merely a placeholder. Both LR and ACR set this to 240 ppi by default, which gives a typical camera image dimensions bearing some reasonable relationship to a potential print size.

Crosstab/Pivot queries. How can I edit using Apex?

Hello, all.
I currently have a report within Apex that displays the results of a crosstab/pivot query as shown below. This works fine.
What I now need to do is provide edit functionality on each row. The row does not have an individual ID column per sé as each row is the result of the crosstab query.
What is the best way to offer the edit functionality using Apex?
Thank,
S>
QUERY:
SELECT vendor, product,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'JAN', amount, NULL)) AS JAN,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'FEB', amount, NULL)) AS FEB,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'MAR', amount, NULL)) AS MAR,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'APR', amount, NULL)) APR,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'MAY', amount, NULL)) MAY,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'JUN', amount, NULL)) JUN,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'JUL', amount, NULL)) JUL,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'AUG', amount, NULL)) AUG,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'SEP', amount, NULL)) SEP,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'OCT', amount, NULL)) OCT,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'NOV', amount, NULL)) NOV,
     MAX (DECODE (TO_CHAR(valuedate, 'MON'), 'DEC', amount, NULL)) DEC
FROM (SELECT v.NAME AS vendor, p.NAME AS product, vt.NAME AS valuetype,
          e.datetime AS valuedate, e.VALUE AS amount
          FROM pfm_entry e, pfm_vendor v, pfm_product p, pfm_value_type vt
          WHERE e.vendor_route_id = v.route_id
          AND e.product_id = p.ID
          AND e.value_type_id = vt.ID
          AND e.value_type_id = 1
          AND e.datetime BETWEEN '01-JAN-07' AND '31-DEC-07')
GROUP BY vendor, Product

Hello, Steven
Maybe you can use collections for that.
Create a new collection which store your select statement.
Each member of the collection have a unique id so you can use edit functionnality.
And create a PL/SQL process which update your original table when the elements
of your collection is updated.
You can look at this doc. It may be useful.
http://www.oracle.com/technology/oramag/oracle/06-nov/o66browser.html
Mike

Collection not maintained when using Edit in PS

Hello,
Using LR 4.1 & PS 5.5
After basic changes to my dng file in LR, I use 'Edit-In' PS to tweek the image.
After saving the tiff in PS and returning to LR, I notice that some metadata is maintained in the new tiff file but it does not copy over the 'collection' from the underyling dng.
Is this by design or am I doing something wrong?
Thanks,
Will

When you round-trip an image to Photoshop, it should end up stacked with the original back in Lightroom. So if the original is in a Collection, the edited version should as well. Collections are not part of an images metadata though. So I'm not sure what is missing if you mean something other than the edited image is not in the Collection.

How to edit using voice dictation?

I have iPhone five. I have downloaded iOS eight. Is there a way to edit while using voice dictation on notes?

ryclark wrote:
@ therealdobro
The linking between Audition and Premiere only works with Premiere Pro, not, unfortunately, with Premiere Elements. So stick with what you know, do your video edit first and then export a video with audio in a format suitable to import into Audition. Then you can work on the audio against the picture and use the original audio track as a guide for checking the sync against. So save it safely and don't overwrite it what ever you do.
Thanks, that's good to know, but can I ask you another question? Here's what I've done: recorded sixty minutes of me playing and singing in both audio and video. It's going to be edited down to about 40 minutes of material, so there will be cuts and joins. I'm going to overdub a bunch of parts over the audio tracks - bass, keyboard, percussion, backing vocals - the whole nine yards. Should I finish the audio portion of the project first, before I get into editing the video? Or can I proceed with the video edits like you suggest and then bring them into Audition to synch up with the overdubbed parts? I have no idea how to go about any of this except for the audio bits - Audition 6 is lovely.
jplew - I apologise for detouring this thread. I hope both topics can co-exist happily in the same thread.

Unable to edit document using "Edit with Word" option

Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.

Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

1. You have allowed Apple to auto-upgrade your Mac
Turn off auto-update here:
Menu > Apple > System Preferences > App Store
2. The Icons on your dock are Aliases not real apps
They point to where the apps really are which is:
For Pages 5.2.2 in your Applications folder
For Pages '09 in your Applications/iWork folder
3. You are alternately opening documents randomly with either version of Pages
Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
right click on the file and choose which version you want to open it
4. Pages '09 can not open Pages 5 files
Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
It will also auto save opened files into its own format.
You can export these back to Pages '09 if you need to:
Menu > File > Export > Pages '09
5. Yes Pages 5.2.2 is a marked downgrade
Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
For further information about what has happened:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
Peter

"Edit Using"... "Edit original"...

Similar Messages

Maybe you are looking for