Edit view not representitive of filmstrip view

I am trying to edit backgrounds. I can see a background in the filmstrip view but not on the stage in edit view.. Whats up? I have included a screen shot.

AJust answered my own question!!!!. ..I had the layer xed out on the time line!!!!!!!!!
Weird..... I have been trying to fix this issue on and off for weeks and one minute after I post the question I resume my investigation of the issue and figure it out!!!!! The mind is a devilish leprechaun.

Similar Messages

  • Legend View Not Working in Compound view OBIEE 10.1.3.4.1

    Hi All,
    One of our project reports( OBIEE 10.1.3.4.1) need to render result set in the compound view format.
    Compound view should comprise of Title view,Table View and Legend View respectively.
    All of the above views have been combined in the compound view,but the legend view is not appearing in the compound view.
    A point to be noted here is the result set is being fetched from the stored proc.
    Any thoughts?Please advise.
    Hope its not a limitation:)
    Regards,
    Prasad

    Thanks for responding my Query,
    Here I have to get the report with "COMPUND LAYOUT" with "LEGEND" But Legend should disply first I mean top of the compound Layout.
    I implimented report like this..
    1) I developed a Normal report in "Answers" for this report I created one Dashbaord prompt as well.In the dashbaord I used "REQUEST Variable" for dynamically get the result based on the I/P given in the "Prompt".
    2) So, then I kept Dashboard promt and Report on the Dashboard Section as a single Section .
    3) If I give any I/P in the PROMPT based on that report get populated with LEGEND would be top and COMPOUND LAYOUD should be bottom.
    4) But I got only Compound Layout only LEGEND was not get populated on the DB.
    Do you have solution for this? Please let me know how to do?
    Regards,
    Prasad.

  • Editable regions not working in code view

    I am working in DW MX, Windows XP. I am making changes to
    current pages and have also created a new template page (based on
    an existing template) for additional pages.
    All of my pages are based on templates, which have editable
    regions. For some reason when I try to make a change in the code
    view I get this error:
    "Making this change would require changing code that's locked
    by a template or a translator. The change will be discarded."
    However, I do not get this message when I make changes in the
    design view.
    I am definitely attempting to make changes in the editable
    region so I'm stumped why this is suddenly happening.
    Any ideas?
    my page:
    http://www.westianet.com/internet/secureit/secureit.htm

    Pleaes restate your problem's symptoms, and include some code
    to
    demonstrate.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Cole_Marie" <[email protected]> wrote in
    message
    news:en3lqg$3jk$[email protected]..
    > Did you ever resolve this issue. I'm having the same
    problem. Using DW8
    > , XP.

  • Single Edition 'activate' not showing up in Viewer Builder

    I have a dilema. My organization has a Professional DPS license. We published our first issue in late Feburary. It is for our ongoing bi-monthly magazine. Fast forward to June and we have a special stand-alone issue we do every year that does not fall under our bi-monthly magazine. We decided to keep things seperate and make this one a Single Edition. We went ahead and bought a Single Edition serial code and were ready to submit to Apple. I realized the problem is after going thru the steps in the Viewer Builder, I am not getting the option to activate and hence use our serial code. I used a different Adobe ID than the one that we use for the regular magazine. Not sure what to do next...

    Thanks Bob for the quick response.
    Then would this show up differently in the Viewer Builder? I don't get a 'activate'. I submitted my app last week and it's still 'waiting for review', on our first regular issue, it went straight from submission to review in the same day.
    Also should I seek a refund for the Single Edition code we already purchased? Not knowing that under the Pro license we would get it in the first place.
    Michael

  • Edited name not shown in coverflow view

    I'm using iTunes 7 with no problems at all. When I purchase music, I capitalize every word in the tracks' titles. On one album I purchased today, however, the edited name doesn't display capitalized in coverflow view. It display correctly in list view and in the lower left corner of the screen with visualization turned on. I've tried restarted iTunes and I've tried using Onyx to clear our the application caches and restarting my MacBook Pro. Nothing's worked so far. Any suggestions?

    Thanks for the "help".

  • How to view scroll bar in filmstrip view in aperture 3.2.2?

    I have aperture 3.2.2 and normally work in filmstrip mode.  In the documentation I notice a scroll bar underneath the filmstrip, allowing you to scroll quickly through the images.  When I open aperture I see no such scroll bar.  Underneath the filmstrip I have keyword controls, but no scroll bar.  I have a couple of arrows that allow me to move one image to left or right, but no scroll bar.  Is there a simple way to be able to have the scroll bar be visible?  Thanks, Ric

    Ok, It now has suddenly appeared.  I switched between the viewing modes several times, and now the scroll bar is appearing.  It took a long time (and many switches) for this to work, but now it works fine.
    Ric

  • Design view not displaying but code view is ok

    Hi Everyone,
    my design view in dreamweaver cs5.5 is not displaying anything but all the code is there and my page online is working fine http://www.exclusivewindowtint.com.au/car-window-tinting.html
    How can i fix this as easy as possible? this is only happening to this one page on my website.
    Thank You
    George

    I have to second  Murray on this.
    I will go a step further and say ignoring errors on your site because someone else's site has some is extremely poor advice, especially considering the volume of people visiting this forum alone with a random display problems that are solved by simply correcting the errors found in the validators.
    Restoring from a backup may work this time, but why did it work? That's where validation, and understanding what the validator is telling you, pays off. You somehow inadvertantly mangled your table code, will that ever happen again? What happens if your backup also has the same mangled code next time?
    Some validation errors are never going to affect display and can be completely ignored from a "how does this affect my design" point of view, like missing an alt attribute on an image for instance. Others, like missing or improperly nested html elements, can kill your design in browsers or rendering engines that can't handle major errors (like most versions of IE or DW's Design View) while everything looks fine in a browser better programmed to handle problems (like Chrome or Firefox).
    Bottom line is, the validators are extremely useful tools, do not ignore the  error report unless you understand which errors can be ignored.

  • Tables in dba_objects view not present in dba_all_tables view

    I have found tables in view dba_objects
    (object_type='TABLE'), which I haven't found
    in dba_tables, or dba_all_tables views.
    What kind of tables are they?
    E.g. in mdsys schema:
    select object_name,object_type from dba_objects where owner='MDSYS' and object_name like 'BIN$%';
    OBJECT_NAME OBJECT_TYPE
    BIN$62DtOxJ2EELgNAAODF0XFg==$0 TABLE
    BIN$62DtOxJ4EELgNAAODF0XFg==$0 TABLE

    This information is contained in the Oracle 10g DBA Administration Guide sections Purging Objects in the Recycle Bin and Renaming Objects in the Recycle Bin.
    HTH -- Mark D Powell --

  • Live View not rendering CSS

    On  a Mac OS Mavefrick, DW CC.  Mostly working fine until recently.  Now CSS changes shown in Design View not seen in Live View.  Checked syntax, made changes in CSS Designer to no effect.  Could not uninstall DW CC (alias corrupted?) but reinstalled DW CC.  Re-install had no effect. Suggestions?
    RJL

    Thanks for your suggestion but this has been a sudden, recent change.  Never had this problem before using DW CC.
    Today, I tweaked the CSS and got to a point on one of my pages (calendar.htm) where everything in Design view and Live view looked just as I wanted it.  Tested in Firefox and Chrome, still fine.  Uploaded the file to the server, opened the page in Chrome, still fine. An hour or two later I went back to calendar.htm and whereas everything was fine in Design view the CSS styling on the h4 tags were not present in Live view.  Checked the web again and the calendar.htm looked as I expected it to look (serrakck.org --> Calendar).
    Still need help.  I have a bunch of CC apps on my Macs and maybe there is some comflick with them.  Don't have any other version of DW except DW CC.

  • View in edit window not getting updatet properly

    Hello
    I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
    Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
    I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
    Does anyone have similar problems with the view not getting updated properly?
    I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
    Greetings

    Hello again
    I made a movie of this behavior:
    https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
    It shouldn't look like that, right?
    Greetings

  • Sharepoint 2013 list view quick edit does not work with out remote API permissions

    sharepoint 2013 list view quick edit does not work with out remote API permissions.
    When I give Use Remote Interfaces  -  Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • Clip appearance not displaying in event browser in filmstrip view

    Some of the clips in the event browser don't display a visual in the filmstrip view until I skim over it.  Any clue?

    Here is a solution to the problem: 
    In the Finder -> Go -> Go to Folder,
    enter   /Users/Your user name//Movies/iMovie Library.imovielibrary/Name of Event/
    (Name of Event is exactly as it appears in the Event Browser)
    Select Go
    This takes you to the folder in iMovie Library for that event, and you will see the contents of that folder as several folders and perhaps a file.  One of the folders is Original Media.  Open that folder and you will see individual files of the individual clips contained in that Event.   Delete the file of choice in the usual OS X way. iI will then appear in the Trash folder.  Empty the trash and it is gone.
    This solution was suggested by Shirt Pocket Support, which provides technical help for the backup app SuperDUper.  I am indebted to them.
    Bob Stokstad

  • AdobeAcrobat/Reader that is running can not be used to view PDF Files in Web Browser...what do I need to do to fix this..

    I just got Windows 7 and have been having problems since loading it. Most of my drivers only go to Vista and don't recognize 7.
    I have trying to download some manuals from their website
    and keep getting this message; Adobe Acrobat/reader that is running can not be used to view PDF files in Web Browser.

    Could I suggest a workaround for PDFs until a solution is posted? Open them directly in the Adobe application rather than in a browser tab.
    In your Adobe application(s), go to:
    Edit > Preferences > Internet
    Then uncheck "Display PDF in browser"
    (There are very few sites where having PDF integrated is really beneficial.)

  • Chrome - Adobe-Acrobat/Reader can not be used to view PDF files in a web browser.

    I can't view PDF files via Chrome (it works on Internet Explorer but I prefer Chrome)  -  the error below has arisen recently on Chrome, though I can't see what has changed.
    "Acrobat plug-in
    The Adobe-Acrobat/Reader that is running can not be used to view PDF files in a web browser. Please exit  Adobe Acrobat/Reader and exit your Web Browser and try again."
    I have looked through Forum articles on similar errors and have tried the following(text copied from other Forum entries)
    Repair Adobe Acrobat (from Acrobat)
    Repair Adobe Acrobat (from Control Panel
    Configure Acrobat  as a helper application: Choose Edit > Preferences., Select Internet on the left., Deselect Display PDF In Browser Using [Acrobat application], and then click OK.Quit Acrobat or Reader
    Create a registry item for Acrobat: with Regedit: If the registry item doesn't exist on the system, do the following: Go to Edit > New > Key and create the missing HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe.Go to Edit > New > String Value and name this key (Default).Select (Default), and then go to Edit > Modify. Type the Adobe Acrobat path in the "Value data" for your product.,restart your computer
    Repair the HKCR\AcroExch.Document registry key: Navigate to HKEY_CLASSES_ROOT\AcroExch.Document., Right-click AcroExch.Document and select Delete; make sure that you have the correct key, and click Yes on any prompts, Right-click AcroExch.Document.7 and select Delete; make sure that you have the correct key, and click Yes on any prompts. Repair your Acrobat  installation
    None has solved the problem. However it still works ok with IE. But I want to stick with Chrome because I find IE is so slow!
    I am using Vista, with Adobe Acrobat standard 9.5.2 and Google Chrome version 23.0.1271.64 m which is marked on Chrome as 'up to date'
    Does anyone know why I might be getting this error on Chrome but not IE?

    I think I have discovered the answer to my own question!
    I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
    (Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
    I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

  • View Fields Not Getting Displayed in View Set

    Hi All
    I have created a new View for Component IUICMDC and assigned it to a ViewSet and on click of a button i need to display this view . The navigation is happening fine but i am not able to see View Fields in it , only ZIUICMDC/AdvSearchVS is getting displayed on top of the page.
    View Area is defined and Debugger is stopping in the Do_init method of View which is assigned to ViewSet.
    Regards
    Alok Sharma

    You should provide the ability to create rows, you can do it on the table by making the table editable and putting a Add another row or you can choose to add it in a drill down create page.
    You can also add a set of new rows initially by creating and inserting rows in the vo in your PR.

Maybe you are looking for