Edit with external program with iPhoto 09 is broken

I can't send more than 4 pictures to an external software program. I use iPhoto 09 to store my photos but use Adobe CS4 to edit. I occasionally shoot 20+ frame panoramas and now I have to manually export 4 at a time. Why can't iPhoto export these photos after I select all of them?
Also, iPhoto 09 exports these pictures out of sequence--i.e. _DSC004 comes before _DSC001, _DSC002, _DSC003. This isn't usually a problem, but why can't the software guys run a sort command before the export?
Can the software guys be given this complaint?

I can't send more than 4 pictures to an external software program.
This has always been true of iPhoto, in every version. My guess is that it’s to prevent folks from inadvertently sending their entire Library to an external editor.
You can send in batches of 4 that’s all.
Also, iPhoto 09 exports these pictures out of sequence
I suspect that this is more a function of how long it takes to open a specific file. I’ve noticed it on earlier versions of iPhoto too.
Regards
TD

Similar Messages

Editing with other programs in iPhoto

How to I get iPhoto to give me the option to edit in Ps2? I went into preferences to change the adjusting program, and it only gives me the option of editing in either iPhoto or Graphics Converter. At one time it had several choices, PhotoShop being one of them. Now it only gives me one external program choice. Where did the other ones go?
Allie

Allie:
One word (well maybe a few more than one) of caution. If you do an edit in PS2 that requires a change of extension to .psd, adding layers is one example, you will have to either flatten the image and force save it as a jpg or save the edited file to the desktop and then import it as a new photo. Otherwise iPhoto will not recognize the edit.

Edit in external editor with lightroom adjustments issue LR5 and PS CC

Since several days when I try (in Lightroom) 5 to edit an adjusted file (NEF, JPEG or TIFF) in Photoshop CC as external editor (with the option "edit a copy with lightroom adjustments") in many cases the adjustments ar not visible in photoshop CC, or only partial visible, and sometimes the file opens not at all. Removal of the preference files of LR 5 and PS CC and a whole new installation of LR 5 didn't resolve the issue. I have a macbookPRO with Mac OS 10.8.5 and the most recent versions of LR 5 and PS CC. Has anyone experienced this problem and what can be a solution.

I have no idea, but have you tried File / Catalog Settings/ General tab: Relaunch and Optimize. Relates to the database.

To play a stream audio file with external program...

Hi, I get with stream a sound file and I have to play it using an external program like VLC, reading the file continuously of a buffer. How can I do it? Would I have to controll VLC commands? I have been reading about it, but I have no idea how to do it.
Thanks.

One way would be that you implement and run an RSTP server and give its URLs to VLC, RealPlayer or whatever proper RSTP client program.

Looking for expert who can highlight 3d model node in adobe reader with external program

I need to select and highlight 3d model node in adobe reader with my program.from outside of adobe reader. it seems there is no out-of-box API in stndard SDK. I want to outsource this task fully or partly. If you have the solution or able to provide consultant in this area, please send message to me.

You would indeed need a plug-in to actually select and highlight but you can easily call attention to a part by temporarily changing the color via JavaScript which you can access from external applications.
I can provide more specific advice if you explain the exact user interaction you're looking for. Is this a desktop application? Is the PDF in a browser? etc.
J-

Execute launch external program with arguments on Windows Mobile

Hy, i try to *run an external application with arguments* from my MIDlet on Windows ME :
microedition.platform     intent JTE
microedition.configuration     CLDC-1.1
microedition.profiles     MIDP-2.0
String urlToLaunch = "/Program Files/MyProgram/MyProgram.exe";
String arguments = "arg1 arg2 arg3";
String urlToLaunchArgs = urlToLaunch = urlToLaunch+" "+arguments;
platformRequest(urlToLaunchArgs);The PDA return : Can't open file '/Program Files/MyProgram/MyProgram.exe arg1 arg2 arg3'
With no argument (urlToLaunchArgs = "/Program Files/MyProgram/MyProgram.exe") it's work fine.
With arguments (urlToLaunchArgs = "/Program Files/MyProgram/MyProgram.exe arg1 arg2") it doesn't work...
If somebody have a solution to propose...
... or another way/method to explain...
Thank you.

> SAPService<SID> and <SID>ADM both have Administrator rights for the server.
> That means they should have full access.
No - this is no more true like that since Windows 2008, it's a bit more complex:
http://en.wikipedia.org/wiki/User_Account_Control
> Where would you setup the permission/policy to "interact with the desktop"?
Add the policy using group policy editor (gpedit.msc)
Markus

Visual studio community with external program - license

Hello. I have a question about using Visual Studio Community. Are the license allows to use Visual Studio community to only write (and testing) an application/game and then building it using external program for example Eclipse or Xcode for commercial purposes?
I create for Android/IOS systems, and working in small 2 persons team.
Sorry for my English, thanks.

Can you give me an email from Microsoft licensing specialist?
@ Metoby，
Sorry for that I also have no email of the license memebers.
In addition, you know that this forum is to discuss the English language issue, so I provide the license call for the English support.
If you want to use other language, one idea is that you could post this issue to your local country if it also have the MSDN site.
Maybe this link would be helpful for you:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Scanning with external DMM with Agilent 34970A using Labview

Hi,
I am a relatively inexperienced user of Labview. I have written a VI to
scan several channels on a 34970A using the 34901A multiplexer module
to take voltage readings. I want to use a more accurate DMM than the
internal one however so I have hooked up a Fluke 8840A to the agilent
and I want the scanner to simply switch between the channels while the
fluke actually takes the voltage measurements. How do I modify my
existing VI so that it uses an external DMM? One of the driver VI's is
'configure external instrument' which i assume is the obvious option
but i'm not sure where to insert this to modify the VI.
Thanks
Tom

What you do kind of depends on the capabilities of the external DMM and how fancy you want to get. If you at the section called 'Scanning With an External Instrument', you'll see how the connections can be made for an automatic scan. The 34970 will issue a trigger to the external instrument and when the measurement is complete, the instrument will send a signal back to the 34970 to close the next relay in the scan list. If you can do this, then the Conf Exteranl Instrument would replace the Conf Scan List and Conf Scan functions in the Advanced Scan Example. I'm not sure about the Conf Trigger but I suspect you would need to set slightly different parameters for that. The Read function would have to be replaced with a read of your external instrument. Some additional functionality may have to be added to take a reading after each relay closure if the DMM cannot save a series of measurements.
I had to once use an external instrument and didn't do any of this. The external instrument did not have external triggering or a an output that could be used to advance the scan so I just used the HP34970 Switch function to close a relay exclusively and a dmm read inside a for loop. I created an array of channels and the for loop auto-indexed them. This was simpler to program but the scan took a bit longer than what is described in the manual.
Message Edited by Dennis Knutson on 08-31-2006 07:47 AM
Attachments:
34970 with External DMM.JPG ‏24 KB

Editing in external program?

I have iPhoto set to edit photos in another app, Pixelmator. I could have sworn that it used to work that I would open a photo from iPhoto into Pixelmator, and then I could save it in Pixelmator and the changes would get saved back into iPhoto. But now (after getting iPhoto 09, I guess?), it doesn't let me do that, it only lets me save it as a separate file in the finder that I have to import back into iPhoto. Is that how its supposed to work?

It works properly with Photoshop Elements, so maybe the problem was with Pixelmator.
On the other hand, I'm having a similar problem with Quicktime Pro and iPhoto, so maybe it is iPhoto... I posted about that problem here: http://discussions.apple.com/thread.jspa?threadID=2294470&stqc=true

Airport Extreme with External HD with iMovie Events. Can't see them!

Here I go again. I just bought an Airport Extreme. I moved my External HD with iMovie Events from my MBP via FW to my Airport Extreme. I can see the partitions in Finder and the Events folder but when I open iMovie, I can't see my events in the library. Since I didn't change the names of the partitions I was hoping for seamless access. That is not the case. I can see the Disks but they have YELLOW exclamation marks on them. They don't seem to be valid. What gives. Looks like I have some more work to do.
Any ideas. Thought this would be easier.
--Mickey

Although this Apple KnowledgeBase article refers to "iMovie '08", I think you'll find that it applies equally to moving the storage of movie material in iMovie '09, too..
Here it is: http://support.apple.com/kb/HT1026
..Also see Shane Robinson's reply in this thread:
http://discussions.apple.com/thread.jspa?threadID=1916977&tstart=0

Associate document in SOLMAN with external program

Dear All,
I was trying to display the older document (in SOLAR01) but it prompts the following error :
"This file does not have any program associated with it for performing this action. Create an association in the Folder Option control panel".
The document that I was trying to open is just a modifiable in SAP text editor(I assume it has no extension). After I received this error, I can no longer open another documents including MS Office in Solman System (it used to display any document. Anyone has experience this ? Please help. Thanks.
Regads

Re-install office solved my problem

How choose destination folder for images edited in external program?

Using LR 2.3 with the Windows 7 beta. It seems to me there should be a preference or option to set the destination folder for an image sent for editing in Photoshop. The default is the folder where the originals are located, which seems to me to be the worst choice. In any event, I can't find where in LR the user can choose a destination folder for the edited image. Ideally, the user should be able to choose this for each set of images being edited, and the choice would be available in the dialog that appears when the user sends an image out to Photoshop.
So is there a way to set the destination folder for the image that results from sending an image out for editing in Photoshop or other external application?
Any help with this would be very much appreciated.

Thanks very much. I have CS4, but haven't installed it yet. So I have been using the rendering option. Apparently that is part of the problem, because I seem to recall that there was a Save As option shown when LR 2 was compatible with whatever the ACR with CS3 was.
Saving with originals seems an odd default. I wouldn't think too many photographers mix processed work with originals, and making the destination folder choice always available wouldn't seem to be a particularly difficult piece of engineering.
Anyway, your answer was very helpful.
Stan Robins

LR5 edit in external program stopped working

I am not aware of having changed any settings or prefs but suddenly I can't sent an image to PS for external editing. I checked the 'external' prefs and they remain as they always were.

The options in the Photo>Edit In menu item (menu bar and contextual) are now greyed out, unavailable.

Install ConfigMgr with external sql with database name given as C-name

I'm installing ConfigMgr 2012 R2 with SQL server on a separate box. The SQL server is configured to replicate to another SQL box. I have created a C-name record to point to the primary SQL box.
During the installation of CM12 R2, the wizard fails its prerequisite check with the following message:
"sccm 2012 configuration manager only supports the use of primary fqdn's, where DNS hostname matches NETBIOS hostname of the the computer" .
Is there a way around this? ( like registering an SPN for SQL Server to point to the CNAME, for instance )
Thanks!

I'm installing ConfigMgr 2012 R2 with SQL server on a separate box. The SQL server is configured to replicate to another SQL box. I have created a C-name record to point to the primary SQL box.
During the installation of CM12 R2, the wizard fails its prerequisite check with the following message:
"sccm 2012 configuration manager only supports the use of primary fqdn's, where DNS hostname matches NETBIOS hostname of the the computer" .
Is there a way around this? ( like registering an SPN for SQL Server to point to the CNAME, for instance )
Thanks!
What is the reason for this setup? High Availability? I would recommend a VM with the SQL Server co-located with the site server instead of thats your goal. But then again I know way to little about your setup and environment in general.
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

Editing EXIF with external editor from Elements 10 Organizer

Hello there.
I'm experiencing a kind problem.
I'm editing exif gps coord with external program.
Organizer config set to "Edit with GPSView", where GPSView is external GPS coords setter.
I'm setting the coords, the edited file copies itself, so, I have 2 files - with old GPS, and new GPS.
Then, I'm making "Flatten version set" - and then I have 1 file, with new GPS.
After that, when I'm tryin to edit same file's GPS once again, Elements turning GPS values to old values, which were before any exif edit.
What am I doing wrong?
I have a bunch of files to edit GPS, and its really breaking me - it is unable to edit even GPS with these "Elements".
Please, help.

Just a suggestion as I am not using GPS tagging : did you try the option to 'write metadata to file' (shortcut Ctrl W) after flattening the version set ? Does it make any difference?

Edit with external program with iPhoto 09 is broken

Similar Messages

Maybe you are looking for