Editable ALV in OOPs : default value for newly created rows

<b>I have created editable ALV using OOPs. </b>
But my requirement is while creating new rows in ALV, one column value should be filled with some default value automatically(as soon as I press create row icon on toolbar)
Thanks.

HI HaReSh
<b>refer to this code below.hope it might help u.</b>
*& Report  ZTESTDEMO_INTERACTIVE_LIST_2
REPORT  ZTESTDEMO_INTERACTIVE_LIST_2.
TABLES: MARA,MARC,MARD.
* internal table itab_mara 3 fields matnr, ernam,mtart
DATA: BEGIN OF ITAB_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,  " material number
ERNAM LIKE MARA-ERNAM,  " name of person who create
MTART LIKE MARA-MTART,  " Material Type
END OF ITAB_MARA.
* internal table itab_marc 3 fields matnr, werks,lvorm
DATA: BEGIN OF ITAB_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,  " Plant
LVORM LIKE MARC-LVORM,  " Flag Material for Deletion at Plant Level
END OF ITAB_MARC.
* internal table itab_mard 2 fields
DATA: BEGIN OF ITAB_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,  " Storage Location
END OF ITAB_MARD.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
INITIALIZATION.
S_MTART-LOW = 'HALB'.
S_MTART-HIGH = 'HAWA'.
S_MTART-OPTION = 'BT'.
APPEND S_MTART.
START-OF-SELECTION.
SELECT MATNR ERNAM MTART FROM MARA INTO TABLE ITAB_MARA WHERE MTART IN
S_MTART.
PERFORM DISPLAY.
TOP-OF-PAGE.
WRITE:/2(15) 'MATERIAL NO',20(20) 'CREATED BY',45(15) 'MATERIAL TYPE'.
FORM DISPLAY.
LOOP AT ITAB_MARA.
WRITE:/ ITAB_MARA-MATNR UNDER 'MATERIAL NO' HOTSPOT ON,ITAB_MARA-ERNAM
UNDER 'CREATED BY',ITAB_MARA-MTART UNDER 'MATERIAL TYPE'.
HIDE: ITAB_MARA-MATNR.
ENDLOOP.
ENDFORM.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
SELECT MATNR WERKS LVORM FROM MARC INTO TABLE ITAB_MARC WHERE MATNR =
ITAB_MARA-MATNR.
PERFORM DISPLAY1.
WHEN 2.
SELECT MATNR LGORT FROM MARD INTO TABLE ITAB_MARD WHERE MATNR =
ITAB_MARC-MATNR.
PERFORM DISPLAY2.
when 3.
sy-lsind = 0.
ENDCASE.
FORM DISPLAY1.
LOOP AT ITAB_MARC.
WRITE:/ ITAB_MARC-MATNR HOTSPOT ON, ITAB_MARC-WERKS,ITAB_MARC-LVORM.
HIDE: ITAB_MARC-MATNR.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
FORM DISPLAY2.
LOOP AT ITAB_MARD.
WRITE:/ ITAB_MARD-MATNR, ITAB_MARD-LGORT.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
regards
ravish
<b>plz reward for useful ans</b>

Similar Messages

  • Non-***. KF are coming blank for newly created Plant/Mat in Inventory Query

    Hi,
    In my BEx query, Total stock quantity values for newly created Plant is not coming.
    BW and R3 have gone live on the same date.
    (1) Did Stock initialization for existing Plant.
    (2) Filled set up table and did INIt load for the existing plants.
    (3) compress the request in BW.
    BX - with marker update
    BF - with no marker update.
    Now two more plants are created in R3 side with their opening stock values.
    Did Delta to BW.
    New Plants are loaded into BW. I can see "Receipt Qty" value in 0IC_C03 cube - 1200.And Issued qty - 000
    But When I execute Bex query, "Total Stock qty" and "Stock in Transit" (these all are non-cumulative keyfigures) are coming as blank.
    Please suggest. Quick response is much appreciated. This is Production (after Go-live issue).
    Thanks in advance.

    Any sugestions ??

  • ALV Grid default values for new rows added with Add/Insert buttons

    Hi!
    Help, please,  to find a way how to set default values for new rows added with Add/Insert buttons in
    ALV Grid.

    I have found salution:
    ALV Grid u2013 Insert row function
    Sometimes we need to assign some default values when we create a new row in a grid using standard ALV Append row button. In our scenario we will see how to assign default values to Airline Code (CARRID), Flight Connection Number (CONNID) and Flight date (FLDATE) when a new row is created. To do that we need to handle DATA_CHANGED event in the program like mentioned below.
    Definition of a class:
    Code:
          CLASS lcl_event_receiver DEFINITION
    CLASS LCL_EVENT_RECEIVER DEFINITION.
      PUBLIC SECTION.
    METHODS:
         handle_data_changed
         FOR EVENT data_changed OF cl_gui_alv_grid
         IMPORTING er_data_changed
                           e_ucomm.
    ENDCLASS.                    "lcl_event_receiver DEFINITION
    Implementation of a class:
    Code:
    CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
      METHOD HANDLE_DATA_CHANGED.
        DATA: dl_ins_row TYPE lvc_s_moce.   " Insert Row
          FIELD-SYMBOLS: <fs> TYPE table.    " Output table
    Loop at the inserted rows table and assign default values
        LOOP AT er_data_changed->mt_inserted_rows INTO dl_ins_row.
          ASSIGN er_data_changed->mp_mod_rows->* TO <fs>.
          loop at <fs> into ls_outtab.
            ls_outtab-carrid  = 'LH'.
            ls_outtab-connid  = '400'.
            ls_outtab-fldate  = sy-datum.
            MODIFY <fs> FROM ls_outtab INDEX sy-tabix.
          endloop.
        endloop.
      ENDMETHOD.                    "handle_data_changed
    ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
    Register the events to trigger DATA_CHANGED event when a new row is created.
    Code:
        CALL METHOD OBJ_GRID->REGISTER_EDIT_EVENT
          EXPORTING
            I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_ENTER.
        CALL METHOD OBJ_GRID->REGISTER_EDIT_EVENT
          EXPORTING
            I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • How  to set default value for Zfeild using statusprofile

    hi experts,
    I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
    I have created a zstatus profile and have set the required status to inital,but no luck
    please suggest if this canbe achived through status profile.
    Regards
    Anu.

    Hi,
    You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into  the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
    The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed"  ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
    This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
    Thanks & Regards
    Suchita

  • How to set a default value for particular field in SRM PO Portal

    Dear Gurus,
    Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
    My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
    I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
    Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
    Thanks in advance...
    Regards,
    Sathish

    Dear Laurent,
    Thanks for your response,
    But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
    My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
    Kinly guide me how to get the particular node of field in the Purchase order screen.
    Thanks you in advance,
    Sorry for the inconvenience if any
    Regards,
    sathish

  • Default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch

    Hi Gurus,
    Requirement is to set default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch when user clicks on Corporate Account.
    Below is code that i have written in DO_PREPARE_OUTPUT.
    Code is working fine and in the debug also i can see the value of COUNTRY is set to DE, but it is not showing on the screen for first time but when i load component second time(Refresh the screen), it shows me value.
    Any help would be appreciated. If somebody has otheralternative kindly share.
      CALL METHOD super->do_prepare_output( iv_first_time = iv_first_time ).
    Calling Super Method
    CALL METHOD super->do_prepare_output
       EXPORTING
         iv_first_time = abap_true.
    Data Declatation
      DATA :lr_col            TYPE REF TO if_bol_bo_col,
            lr_current        TYPE REF TO if_bol_bo_property_access,
            lr_param          TYPE REF TO if_bol_bo_property_access,
            lr_qs             TYPE REF TO cl_crm_bol_dquery_service,
            lv_attr_name      TYPE name_komp,
            lv_sign           TYPE bapisign,
            lv_option         TYPE bapioption,
            w_country_exist   TYPE c,
            w_param           TYPE string,
            w_value           TYPE string,
            w_flag            TYPE c.
    Getting SEARCH Context Node
      lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
    Get Selection Parameters
      lr_col ?= lr_qs->get_selection_params( ).
    Start from first parmaters
      lr_current = lr_col->get_first( ).
    Clearing Variables
      CLEAR : w_country_exist, w_flag, w_param, w_value.
    Loop till we have selection paramters
      WHILE lr_current IS BOUND.         " While loop 1
    checking attribute name is COUNTRY then setting some variable
        w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
        CASE w_param.
          WHEN 'COUNTRY'.
    If country is filled then setting variable
            w_value = lr_current->get_property_as_string( 'LOW' ).
            IF w_value IS NOT INITIAL.
              w_country_exist = abap_true.
            ENDIF.
    When we got COUNTRY attribute then setting flag
            w_flag = abap_true.
        ENDCASE.
    Calling next parameter
        lr_current = lr_col->get_next( ).
      ENDWHILE.                          " While loop 1
    In below block we are checking is COUNTRY attribute is blank and
    we have found COUNTRY attribute in current selection paramters
      IF lr_qs IS BOUND.                 " SEACRCH CONTEXT BOUND
    If vairable is blank means DE or any other value is not filled in COUNTRY Attribute
        IF w_country_exist IS INITIAL.   " w_contry_exist
    We have to add selection attribute if we come accross COUNTRY attribute during our search
          IF w_flag EQ abap_true.        " w_flag
    Adding COUNTRY attribute with default value 'DE'
            lr_qs->add_selection_param( EXPORTING iv_attr_name = 'COUNTRY'
                                                  iv_sign      = 'I'
                                                  iv_option    = 'EQ'
                                                  iv_low       = 'DE' ).
          ENDIF.                         " w_flag
        ENDIF.                           " w_contry_exist
      ENDIF.                             " SEACRCH CONTEXT BOUND
    In below block we will remove COUNTRY attribute when it has blank value
      IF lr_qs IS BOUND AND w_country_exist IS INITIAL.
        lr_current = lr_col->get_first( ).
        WHILE lr_current IS BOUND.
          w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
          CASE w_param.
            WHEN 'COUNTRY'.
              w_value = lr_current->get_property_as_string( 'LOW' ).
              IF w_value IS INITIAL.
                lr_col->remove( iv_bo = lr_current ).
              ENDIF.
          ENDCASE.
          lr_current = lr_col->get_next( ).
        ENDWHILE.
      ENDIF.
    Edited by: Harsharandeep Singh on Apr 28, 2011 3:44 PM

    Hi,
    Try it like this:
      DATA:
        lr_bo        TYPE REF TO if_bol_bo_property_access ,
        lv_attr_name TYPE name_komp.
      FIELD-SYMBOLS:
        <ls_param>   TYPE crms_thtmlb_search_criterion.
      READ TABLE parameters
           ASSIGNING <ls_param>
           WITH KEY field = 'COUNTRY'.
      IF ( sy-subrc = 0 ).
        <ls_param>-value1 = ip_pfct.
      ENDIF.
      CHECK ( me->parameter_collection IS NOT INITIAL ).
      lr_bo = me->parameter_collection->get_first( ).
      WHILE lr_bo IS BOUND.
        CALL METHOD lr_bo->get_property_as_value
          EXPORTING
            iv_attr_name = 'ATTR_NAME'
          IMPORTING
            ev_result    = lv_attr_name.
        IF lv_attr_name EQ 'COUNTRY' .
          CALL METHOD lr_bo->set_property
            EXPORTING
              iv_attr_name = 'LOW'
              iv_value     = 'DE'.
          EXIT.
        ELSE.
          lr_bo = me->parameter_collection->get_next( ) .
        ENDIF.
      ENDWHILE .
    Kind regards,
    Micha

  • Default values for static report parameters are not visible when scheduling

    Hello
    Crystal Reports 2008 Dev
    Crystal Reports Server 2008
    When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
    In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
    However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
    I have published in the following 3 ways:
    Publishing Wizard
    File > Save As > Enterprise from withing Crystal Reports Dev
    CMC > Folders > Add > Crystal Reports
    The results are the same for each method of publishing.
    To try to eliminate any DB issues etc i have created a report that is not attached to a datasource. 
    This test report has one Static parameter. 
    I have set 3 values for its list: Entry A, Entry B, Entry C
    Entry X is set as the parameter Default Value
    The parameter is placed in the details section of the report
    When the report is Viewed it will prompt for parameter entry, with the default value present
    When I try to schedule the report is will not have an entry for its parameter
    It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
    Is this a config problem that i have ?
    Can anyone help me with this ?
    Best regards
    Patrick Coote
    Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
    Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

    Hi Robert
    Thanks for the reply and apologies for not responding sooner.
    What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
    Although this is a bit clumsy, it is sufficient for now
    Best regards
    Patrick

  • Defining default value for financial reports display in the workspace (9.3)

    Hi
    I need to change the default value for financial reports workspace preview mode, for every workspace user. It is actually set on html, and I would like to have pdf instead.
    This option can be changed when logged on the workspace, in file->preferences->financial reporting->default preview mode. However I want every user to start with the right settings, so they dont have to change anything manually.
    I have tried to do it with Shared Services : under projects, BI+, assign preferences. From there I can change the default folder and the start page (the general preferences), however I cannot find the options for financial reporting.
    Is there a way to change these values with hyperion tools ?
    If not, is it possible to change it directly in the repository DB ?Thanks and best regards

    We looked at this about 2 years ago - from memory, you can only set preferences when the users are first setup in Shared Services, under the manage preferences section of the wizard.
    I can't remember if there is a settings file you can edit for the default users - i think there is, but again this must be set before users are set up.
    We looked at changing users preferences, but gave up on the idea as all users had been provisioned already :-(
    Cheers, Iain

  • Default values for

    Hi,
    I am trying to load a datafile to a table using SQL*loader, how can I assign the default values for a coulmn in control file of sql loader, here are datafile and target table i am using
    datafile
    empid,empname,empdept
    1001,clark,123
    1002,Mike,123
    1003,john,123
    1004,bryan,123
    desc emp_table
    empid number(10)
    empname varchar2(30)
    empjob varchar2(20)
    empdept number(10)
    empmgr number(10)
    The datafile has the data for only 3 columns in emp_table, there is no data for empjob and empmgr in the datafile.I would like to use default values for them empjob = sales and empmgr = 2001, so how can I set these default values in the control file.
    Thanks in advance!!

    The simplest way is to forget about passing default values in control file. Create table just for this load with DEFAULT constraint for missing columns and load file in this newly created table. Let's call it LDR_TBL. Then "INSERT INTO EMP_TBL SELECT * FROM LDR_TBL; " Make sure you define control file as follows (skipping empjob and empmgr). Oracle will populate "empjob, empmgr" with 'sales',2001 as part of column constraint.
    load data
    infile 'x.txt'
    into table emp_table
    fields terminated by ',' optionally enclosed by '"'
    (empid,empname,empdept)
    When all is done, DROP TABLE LDR_TBL ;
    Does this help ?

  • SP Online - Managed Metadata column Default Value for folders (using CSOM)

    Hello,
    I am working on setting default values (metadata columns)  for different folders on my document library. As so far, I've found solution about how to set default values on whole library and many solutions which works for folders, but not for sharepoint
    online (using metadataDefaults object).
    The only working solution for folders in SPO I've found is editing file library/Forms/client_LocationBasedDefaults and add some data here.
    My question is: is there any easier method to set default values for each folder in document library without manually editing this file? 

    I second that, I have a client looking to do the same thing but I don't see a way to automate this.

  • Modify default value for static parameter field programmatically

    Hi,
    I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
    I was even able to modify the default values for the parameters, which are used for scheduling of each report.
    But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
    This is what I have tried so far:
    Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
    Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
    Any help will be appreciated.
    It would be great to know if someone of you has already implemented successfully such a use-case.
    Regards,
    Stratos
    Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
    Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PM

    Hi,
    For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
    - Bhushan

  • Can you set default values for person/group picker fields? To current user?

    Two-part question/issue . . .
    Part 1:
    In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties.  There doesn't appear to be any equivalent for
    the Person/Group Picker field type in Properties.  I'd like to set a default person for a few fields in a form I've created.  Is this possible?
    Part 2:
    The default user I want to set for one of those Person/Group fields is the "current user."  I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
    automatically populate this particular user.  Is this possible?

    Hi Stephen,
    You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
    First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
    http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
    Secondly you can use JQuery and SPServices ,
    $().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
    list and auto populate it with getting the current user Name from User Profile here is the scripts
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
    <script language="javascript" type="text/javascript">
    $(document).ready(function() {
      var userCurrentName = $().SPServices.SPGetCurrentUser({
        fieldName: "CurrentUser"
      $("input[Title='CurrentUser']").val(userCurrentName);
      var userPhone = $().SPServices.SPGetCurrentUser({
        fieldName: "WorkPhone"
      $("input[Title='Phone']").val(userPhone);
    </script>
    Krishana Kumar http://www.mosstechnet-kk.com

  • Set Default Value for a Date Navigator

    Hi all
    Is it possible to set a default value for a date navigator.I mean with out picking the date from the Navigator, on load of the view itself i need a particualr date to be displayed (say 12/31/2000).
    Thanks in advance

    Hi,
      create a value attribute of type date bind to the input field and in wdInit()of view controller write this code..
      wdContext.currentContextElement().setValueAttrName(new Date(Calendar.getInstance().getTimeInMillis()));
    means ...
    u r setting the date entered into some context ....
    type of that attribute must be of date and for initial value write the above code ..if it is under node element create nodeelement bind it to context and write the code accordingly..
    Message was edited by: Yashpal Gupta

  • Calling a user defined function as default value for a column

    Hi All
    Can we call a user defined function as default value for a column ??
    for example:
    create or replace  function test1  return number is
    begin
    return 10;
    end;
    create table testt
    (id  as test1,
      name varchar2(20));
    getting error:
    Error at line 1
    ORA-02000: missing ( keywordThanks
    Ashwani
    Edited by: Ashwani on Jan 16, 2012 1:19 AM

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database » SQL and PL/SQL which you can get more quick response
    Regard
    Helios

Maybe you are looking for

  • Basic functions (high) in query formula for highest # of days past due

    Hi All, I hope you can help.  I am trying to create a formula in a query for FIAR Line Item Cube (0fiar_c03).  I would like to calculate the hightest number of days past due for open line items.  There is an operator 'high' in basic functions within

  • How to realtime monitor changes in the filesystem?

    Does anyone know of a way to realtime monitor for changes in the (windows) filesystem using Java. (file creation in particular). I've done this in VB and C++ using "findfirstchangenotification" which I think is part of the windows API. I'm attempting

  • Select from table of records

    Hi, Inside of a stored procedure I created: - a record type:TYPE gr_rec IS RECORD (contact_id number) - a table of records: TYPE gr_tb IS table of gr_rec INDEX BY BINARY_INTEGER and then I populated the table in a loop: tb(i).contact_id := a.contact_

  • IPhone won't auto launch iTunes anymore

    I just updated to Lion and the new version of iTunes. When I plug in my iPhone, however, iTunes won't launch and autosync anymore. I checked the settings and, based on my preference settings, it should autolaunch. I tried to click and unclick on the

  • Function group cannot be processed

    Hi All, I have added a new field to an already created custom table. when trying to regenerate the table maintenance generator i get an information message "*function group cannot be processed*". The reason being that the function group is inactive.