Edited a .jpg file with MSPaint, edit doesn't show up in Dreamweaver. ?

In my images folder for my website are several .jpg files. I edited the .jpg file in MS Paint. I added a few blue pixels to stand out. Then I reopened Dreamweaver MX in local view, looked at the .jpg with Preview in Browser/Firefox, and there were no blue pixels. I assume that the image must be permanently cached somewhere on my computer that I can't change. Uploading the file didn't help. Reloading dreamweaver didn't help. Windows XP, Dreamweaver MX. This just started a few days ago.
I posted this on another of these adobe forums, but then I saw that nothing had been written on the forum in 2 months and that I was one of the most active participants, and I'm pretty new.

Paul Klinkman wrote:
It's a new day so the computer was powered down and back up.
I deleted the image from the page. I used "add image" and found the image. I have the same old image, the one that should have no longer existed. No dice. Note that this process doesn't involve Firefox in any way that I can see.
You say "the one that should have no longer existed". Does that mean that it does indeed exist? I mean... physically, is the original image still in the folder? It just seems to me that it would be impossible to "select" an image or even a version of it, that no longer exists. It's like if you paint a red door yellow, there's no chance that one day you will walk past it and it will suddenly be red again all by itself.
Another thing, have you tried renaming the edited image to something nowhere close to the original? If youdo that, and remove/add it, and it still shows the original image of a different name, then you'v e got some serious problems.
Message was edited by: Expatriated Mac User

Similar Messages

Open JPG files with Bridge RAW by double clicking?

I am using CS4 Bridge 3.0.0.0.464
When I double click on a JPG file it opens in Photoshop.
I prefer to edit my JPG files with Bridge camera RAW.
At present, I have to right-click and choose 'open in camera RAW'.
Is there a workaround for this?

You're all over the map with that description, perhaps assuming some things are coupled that are not, normally (Camera Raw, Smart Object, Crop).
Start with the basics: There is a Camera Raw preference that determines whether JPEGs and TIFFs will be opened by default through Camera Raw by default. It's important to note that once you have opened a file with Camera Raw, metadata is stored so that it will open that same way every time, so these settings apply to JPEG or TIFF images that haven't been opened before.
In Photoshop, click Edit - Preferences - Camera Raw...
Note the settings below:
-Noel

My jpg files from CR2 edits in CS6/CC are not being imported into LR5.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5. Bridge and Explorer can see them ok. Tried to reimport but LR5 cant see them.
The file numbers are the same as original CR2 but have the jpg extension. TIFFS and PSDs seem ok. Can anybody help please?

how do I get all these files in my catalogue in the correct places cos they scattered around a bit
That's kind of a broad question ... and there are many different approaches ... so I will explain my approach, and other people can explain their approach.
My approach is to assign keywords and optionally captions and titles and other metadata to all of your photos, and use those to organize and search. Then, it doesn't matter what folders things are located in, if you want to see all your pictures of Chicago, you simply click on the arrow to the far right of the keyword Chicago. You don't have to remember what folders to look in, and this works even if the photos are scattered in a dozen different folders. In addition, since photos must be in one and only one folder, that limits your ability to organize; but you can assign as many keywords as you'd like to a photo, so a single photo can have keywords "Chicago" "Zoo" "Elephant" "Vacation" "Illinois" "United States" etc.

How do i edit a pdf file with acrobat 9 standard

i have a doc that was sent to me thru email, i saved it as a pdf file now i want to edit it and it seems impossible. Please help!
Thank you

First choice is to edit the source file with its 'host' application.
Acrobat provides the TouchUp Text tool for *minor* touchups.
But, regardless of this PDF is not an editing / layout / formatting format.
Be well...

How do I edit a PDF file with Adobe PDF Pack?

How do I edit a PDF file with Adobe PDF Pack?

Well, you don't. Editing a PDF is a difficult and fraught business even with the most expensive software.
But PDF Pack lets you export to Word; then often you can edit in Word. Now you can make a new PDF. It might look like the original, or it might not. If small changes matter you might be out of luck. ON NO ACCOUNT USE THIS FOR GOVERNMENT FORMS.

How can I import an Aperture Catalog into Lightroom and retain the RAW file as well as the files with the edits?

I have several catalogs in Aperture that I would like to import to Lightroom 5 and I want to retain the original RAW files as well as the files with the edits. How can I do this?

Well, you can bring in the raw file (without edits), and you can bring in a rendered RGB file (e.g. jpeg or tiff) with edits baked in, but what you CAN'T do is bring in a raw file, with the non-destructive Aperture edits, and have Lr translate those Aperture edits into Lightroom edits.
Put another way: no raw converter/editor can understand the edits of any other raw converter/editor. So, you have to work with a rendered version, and/or re-edit from scratch in a new raw converter/editor.
PS - it would be feasible to write a rough translator which approximated raw edits in one world into edits in another, but such does not exist yet for Aperture -> Lightroom, that I know of.

HT4753 would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

kearly - thanks a million for posting both the question & the reply! I just unchecked that little box by accident, & couldn't figure out for the life of me how to fix it. Thanks again!!

How to open a jpg file with Adobe Camera Raw

I know it is possible to open a jpg file with Adobe Camera Raw using Bridge but is it possible to do this using PSE7? Thanks.

Yes. In the editor, File>Open As, and choose camera raw as the format. John Ellis also has a script for doing this directly from the organizer, but I don't have the link right at the moment. Hopefully he'll be along with it sooner or later.

When I import TIF and JPG files with same metadata, only the TIF files are imported. How can I change that?

I have imported and renamed TIF and JPG files with the same metadata re recording date and time. Only the TIF files are imported, the JPG files remain unimproved. Thus I have in the Finder e. g. 13 image files in the same folder in which Lightroom only finds 10 files. Any ideas for resolution welcome!
Thanks

Turn off the option Preferences > General > Treat JPEG Files Next To Raw Files As Separate Photos. Then do an import again. It appears that, in this instance, LR considers a TIFF to be a "raw" file.

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

Need Sample JPG Files with Valid XMP data

Greetings,
I Have downloaded and built the XADumper and would like to "dump" on a JPG file with some VALID XMP data.
However, I have no application to sutff the data and no sample file that I know has something readable.
Does anyone have some they could post?
Even better, anybody have something working to stuff some valid data that can be used to create files -- or better use as a further code example?
Thanks Much,
-forrest

Hi Marc,
the XMP states (obviously):
dc:format = "image/jpeg"
xap:CreatorTool = "Adobe Photoshop CS3 Windows!"
According to the XMP it is a JPEG file. But your file is corrupted:
Each JPEG file has to start with a "Start of Image" tag, which is 0xFF, 0xD8.
Regards,
Stefan Makswit

I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

Hi ChristianHelpplz,
Thanks for visiting Apple Support Communities.
It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Restart your device
Restart your iOS device or reset your iPod.
Restart your Mac
Turn your Mac off and back on.
Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
From:
If you don't see your connected device in iTunes for Mac - Apple Support
If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
Jeremy

I downloaded an album from iTunes on my iPad and then i synced it with iTunes it doesn't show the individual songs in my library just the album which opens another window. Can you help?

I downloaded an album from iTunes on my iPad and then i synced it with iTunes it doesn't show the individual songs in my library just the album which opens another window. One of the albums won't even play the music. Will only open the "booklet" for the cd but not the music. Can you help?

Hello dannugget
Normally, if the songs showed that it is purchased then it is probably already in your library. If not check out the article below to walk you through downloading your past purchases. You may also want to check to see if you have Automatic Downloads turned on so that way next time you can get your tracks without having to plug in and sync.
Download past purchases
http://support.apple.com/kb/ht2519
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
Regards,
-Norm G.

Can no longer edit app descriptor file with 3.4 - really?

Until now, when publishing to AIR from Flash Professional, I could manually edit the app descriptor XML with a little workaround:
1. Set up my publish settings in Flash Professional and click OK
2. Then edit the XML file and save it
3. Then Publish from Flash Professional WITHOUT opening the Publish Settings again (which would recreate the XML file).
This has been CRUCIAL to me in order to add certain elements to the XML file such as <extensions> I want to include with my project.
However, this seems impossible to do with the 3.4 AIR SDK release version. When I try, it ignores my manual edits of the XML file and simply removes them when I publish. This is a HUGE problem because now I can no longer add <extensions> in the app descriptor file (and this can't be done from the Flash Professional GUI).
Anyone have ANY idea how to keep adding my extensions to the app descriptor file?

Hello,
I have the same problem, but not the same solution : I have an old air application under Air 2.0, with an automatic updater, and wanted to make an intermediate application as seen here : http://helpx.adobe.com/air/kb/update-air-2-or-earlier.html .
So I have to change the application descriptor by hand. But Flash CS6 always overwrite this descriptor with its own datas while exporting.
How can I change my application descriptor for this intermediate version ? I have Flash CS5, but not Flash CS5.5, and the extension for Flash CS5 doesn't exist anymore !
Thanks !

Editing a PDF file with Acrobat XI pro... some "text" is not selectable and vanishes upon saving

Hi folks.
I've googled around for a few hours, but I'm completely stumped with this one.
I'm trying to edit a .pdf file that was generated from Word 2007. Mostly it edits fine, but for reason some of what appears to be text isn't selectable with the text and image editor... in fact it doesn't even have a bounding box around it. When I move around the document or save it in acrobat pro, the "text" then vanishes.
I include a dropbox link to a partial screenshot image which shows what I'm talking about. You can see that the italic bold A doesn't have a box around it in some cases.
https://www.dropbox.com/s/42i8xms78lvw12b/Screenshot%202014-02-07%2011.19.07.png
Can anybody kindly shed some light on what I'm doing wrong?
Thanks!
-- gyre --

Hi Bill. Thanks for replying.
Unfortunately, I don't have the option of using the original DOCX file. The author lost it, leaving only the pdf around
I'm using AA XI 11.0.06. Upgraded this morning. That's running on Windows 7 Ultimate 64.
I get the boundary boxes by clicking on the 'edit text and images' tool, and they appear. Or don't in this case
I only need to change a few characters in the file. However, even just opening up the file in AA and then saving, the "A = " "text" gets deleted.
Could it perhaps be something to do with embedded or missing maths fonts on my machine? I mean, I don't get any warnings, just can't do anything with the A and AB italic bold text.
Thanks!
-- gyre --

Edited a .jpg file with MSPaint, edit doesn't show up in Dreamweaver. ?

Similar Messages

Maybe you are looking for