Edited file saved as .tiff and I need. jpg

I edited a picture in Lightroom and now the file is a .tiff file. I need it to be a .jpg file. Is there a way to change it? How can I avoid this happening again? Thank you

Thank you for your reply. I corrected the lighting in the picture first in Lightroom, then chose to edit the picture in Photoshop CS2. Then I went to File, Save as in Photoshop and saw the file was a .tiff file and did not have the option to save it as a .jpg file. When I tried to put the photo into elements to create a slide show the picture was not the right format. All of the pictures were .jpg files when I uploaded them into lightroom. Somehow, the few that I chose to edit first in lightroom and then in photoshop ended up being .tiff files. After spending about 2 hrs trying to figure this out I went back to lightroom and chose "Export" and then was able to save as a .jpg. Would still like to know why the picture became a .tiff file?

Similar Messages

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

What happens when you try to use the clone stamp tool?
It should work with the images side by side.
You can setup photoshop cc to be like photoshop cs2 was on your other mac, by going to Photoshop>Preferences>Interface and unchecking
Open Documents as Tabs and Enable Floating Document Window Docking
And also going to Window and unchecking Application Frame

How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch. If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

Print a file to printer wirelessly and without need to use CD drive to install driver?

I have a HP-P1006 printer in my conference room and sometimes my guest want to send print to my printer and I have to connect their laptop with USB cable to my printer and install printer driver thought CD Drive. I want to know if there is a way to print a file to printer wirelessly and without need to use CD drive to install driver? (I don't have a wireless network in my conference room)

Is it possible to automate Adobe Reader to load files, then set the staple property and location, then print them out? I've seen in .NET 3.0 that there is a Enumeration for Stapling in the System.Printing Namespace. I need to figure out how to automate the printing in adobe but right before it prints, have .NET assign the printer and whether it should be stapled or not.

I deleted a very important pages file from my iPad and I need it back

I deleted a very important pages file from my iPad and I need it back pronto! I just updated my iPad without a computer and it had the file there. I need to know how to get back the file very quickly.
thx in advance

Thne unfortunately, your document is gone. You can restore lost or deleted documents from backups if you have backups - and as long as the backup contains the document - but if you did not copy the file to your computer - or backup the iPad, the document is gone.
You really should start backup up your iPad. You can sign up for a free 5GB iCloud account right on the iPad and then you can use iCloud for backing up. You can do it right on the iPad.

I had an old iPod nano with my files saved on it and was stolen. I cannot find my old account. I bought an iTouch and made the new account that was needed for it to function. I was wondering how i could find my old account and get all the content back.

I had an old iPod nano with my content saved on it and was stolen. As well, I can't find and access my old account that I had with it. I bought an iPod touch and made a new account so that I could use the iTouch. Anyone know how to find the old account and how to transfer data from the old one to the new account?

This may help you find your iTune account:
Frequently Asked Questions About Apple ID
Without knowing your old account info there is nothing you can do.

HT1766 I purchased two apps for my iPhone and every time I try to install them on my phone I keep getting a message saying that the file is over 50MB and I need to connect to wi-fi or use iTunes on my computer to download. How do I do that?

I just got an iPhone 4 and have been downloading apps from the iTunes store when I encountered difficulty with two specific apps. Each time I try to download dictionary and star walk I get a message saying they are over 50MB and I need to be connected to iTunes to download, which I've tried to no avail. I also thought that when I sign into iTunes on my PC that it would automatically show that my iPhone device is connected (just like it does with my iPod) but it doesn't show the phone icon. I am not sure iTunes is recognizing my phone. Any help you can offer is greatly appreciated.

Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan.

PSD files saved for web and devices show up as broken when opened Dreamweaver. How can this be fixed?

PSD layouts saved for web and devices show up as broken links in dreamweaver. Previews in browsers are fine, but I keep getting and error message that says the files have been blocked. What is the fix for this?

You can also try out Project Parfait. It's a new experiment from Adobe that’s currently online and free to try out and use.
It allows easy PSD comps-to code workflows.
Project Parfait (Beta) - PSD CSS Extraction, Measurements and Image Optimization Service for the Web
-Subhadeep

Saving ai file with title, description and keywords to jpg

Hi,
Is ther a way to save an ai file to eps and jpg   including the document title, the description and keywords in the xmp file info?
JPD

Hi,
I was wondering if I can get the Description and keywords from an ai file
then
add theese to a created jpg or eps with something like this:
---snip     SaveForStocks-10.js version 1.1 ---
// Export as a jpg
targetFile = new File(destFolder + '/' + name1);
Doc.exportFile( targetFile, fileType, jpgExportOpts );
--- snip---
---snip     http://forums.adobe.com/thread/478694?tstart=60 --
#target bridge
addNametoMeta = {};
addNametoMeta.execute = function(){
var sels = app.document.selections;
for (var i = 0; i < sels.length; i++){
var md = sels[i].synchronousMetadata;
    md.namespace = "http://ns.adobe.com/photoshop/1.0/";
    var Name = decodeURI(sels[i].name).replace(/\.[^\.]+$/, '');
    md.Keywords = md.Keywords + ";" + Name;
----- snip----

IPhone 5s wireless connectivity issues, cannot upload files/state to iCloud, and supposedly needing to do so in order to get my files/state onto a new iPhone 6 Plus

I am trying to get my files from my old iPhone 5s onto my new iPhone 6 Plus. I am currently and have been using iCloud to backup my files/state. However, I believe the antenna on the iPhone 5s went kaput a few months ago, because the Wi-Fi and Bluetooth, both, do not work at all, meaning, I have tried all solutions including, resetting network settings, restarting the phone, etc. This is problematic because, as far as I know the iPhone 5s needs to be connected to Wi-Fi or Bluetooth to a Wi-Fi Hotspot in order to ask the internet, in order to upload current information/state to iCloud. Herein lies my problem.
I have used iCloud already, to download my current files/state to my iPhone 6, with a caveat, these are only the files/state from before the antenna supposedly went kaput. That means, that all of my files/state since that time, while still being on my iPhone 5s, is not uploaded to iCloud, which then means I do not have it on my iPhone 6 which was updated to the most current files/state that was available at the time.
What do I do?
I have iTunes installed on a Windows 7 and Windows 8.1 Computer, and I have made a backup on there. However, I have to admit, I find iTunes very counter-intuitive and very difficult to use/understand. And I'm mostly referring to the syncing/backing-up features. I know you have to have safe guards to protect software usage, but with this high-minded philosophy of minimalism, couldn't it be as easy as drag and drop? Even software syncing? USB syncing with iCloud, etc?

Thank you for the information. I checked out the section and read it through. From what I can gather, you can start your new iPhone from an itunes backup (Set Up Iphone > Restore from iTunes Backup), but, in my situation I need to add the Files/State from the old iPhone backup to the new iPhone that was started from scratch and has it's own unique Files/State, without subtracting from either. The problem is, that I don't want to subtract anything, and from what I understand about Syncing, if I am Syncing a new iPhone that's been started up, edited, has it's own suite of apps, etc. to an old backup of a previous iPhone, I am going to lose everything new I've done, as it will sync with the previous Files/State.

App Files Saved as XML and Working with New Versions

We work with app data in the form of array of large clusters and use LV Anything to XML conversion VIs to save to disk.
The problem is when new app versions are developed and changes are made to the cluster format; we want the customer to be able to open the old version saved XML file format.
Usually the saved cluster (in XML) has be changed by adding/removing a field or even changing the options of a ring control for example.
The app name and version is stored in the XML.
Question: Is there a way of easily working with XML file formats with slightly different fields?
In the past we have worked with the raw XML text by searching for fields which are different and modifying them accordingly so they are accepted by the new file format.
Any tips would be greatly appreciated.

battler. wrote:
I have written a software name and version cluster to XML. How do you read the version field in the XML? Do you use string search? Is there a better way?
Yes, I use String Search (because it is near the beginning of the XML string). Depending on your XML "flavor", you should be able to uniquely-identify the Version information.
I'm interested in how best to work with XML. It seems cumbersome and prone to error to use string functions. Is there a way or best practice of reading the XML fields directly without converting to cluster?
XML is, after all, text with specific "tag" information, also text, identifying it. String functions are pretty much "the way to go", but except in rare circumstances, you shouldn't necessarily "roll your own", but should try to use the utilities that come with your XML package that "know" how to do the mapping between the XML representation of a LabVIEW variable (and its value) and the Variable itself.
Can you elaborate on these "mapping" and "reading/conversion" routines you're using? How do they work and what functions do they use?
An excellent question. There are at least three XML packages out there for LabVIEW -- the "native" LabVIEW package that NI provides, EasyXML from JKI Software (distributed using VIPM), and GXML, also on the LabVIEW Package network. I'm afraid that I'm slightly "abusing" XML, and have made some modifications to how I use EasyXML and GXML.
If you simply view an XML file in a "smart" editor, you'll see a series of text lines with Begin/End tags (like HTML). Depending on the XML "flavor", embedded between the tags are data that describe the LabVIEW variable type (e.g. Dbl, Cluster, Array, etc.) and also the value(s) of the Variable. The "ReadXML" (or similarly-named) function takes this description and (usually) returns a Variant that you can "turn into" the chosen variable (because you know the data type). [You may need to tell the Reader, in advance, the type of LabVIEW variable to expect so that it "knows when to stop reading"].
As to how they work, they just do String pattern matching and processing, usually of a pretty sophisticated level, but then you don't have to do the hard work yourself!
Why do you use Private Project library? Is your project based on OO?
The reason I used a Project Library with the "messy details" in the Private parts has nothing to do with OO, but rather with "data hiding". I actually developed this for my data processing routines. I had a set of routines that collected and analyzed the data (about 700 VIs). Let's call this Project "Version 1".
For Version 2, I basically added a dozen variables to the main Data Cluster (having over a hundred elements) that characterized the response. As this Cluster was in a Type Def, I didn't have to change my code very much to accomodate this new data format, so most of my VIs kept the same name, but were "different" because the underlying TypeDefs were different.
So I have a Version 1 program that can analyze Version 1 data, and a Version 2 program for Version 2 data. What I want is a Version-independent program that can look at the data, and then call for Version 1 or Version 2 analysis. By burying the Version 1 and Version 2 code inside of a Project Library, and only exposing the top-level "Analyze My Data" VI, my Analysis routine, which didn't know (and didn't care) about the two different Data TypeDefs, just figures out (from the XML) which Version of data I have and then calls either Lib1:Analyze My Data or Lib2:Analyze My Data. If I ever change the Version again, I just need to copy the code in the Library to a new Lib3 Library, modify the TypeDef and related version-specific code as needed, and I'm done.
I may have made this sound easy -- trust me, it was a definite learning experience. While trying this out, the first thing I did was to "break" my installations of LabVIEW 2012, 2013, and 2014 (curiously, LabVIEW 2011 wasn't broken). It stayed "broken" for about a week, then "cured" itself (I'd done something illegal, or maybe just immoral, with my Library, and it took a while to purge the badness).
BS

Any additional ways to edit files saved as HTML?

I own Acrobat 9 Pro. It's megacool and today I got to looking at some of the extra features and realized I probably don't have to go out and find a PDF-to-HTML converter. I say "probably" because I just ran a test saving a text-only PDF file as HTML from Acrobat. I've been doing Web design for years, and when I opened up the resulting file in my HTML editor there were problems. Although id does include CSS -- a must-have -- there were still a large number of style settings that needed to be eliminated and all handled by a single CSS selector. I tried doing a search-and-replace in Dreamweaver, which normallly works very quickly even over an entire site, and it started grinding away like my antivirus software does during a deep scan of my hard drives. I did look at the output options in Acrobat, but there was nothing there that indicated I could gain more control over the nature of HTML it generates. Any tips?

The major options you have would be related to HTML 3 versus HTML 4. I doubt that you get much in terms of style sheets since that is not a major part of the HTML 4 standard as I recall. What you do get in styles is likely highly dependent on the tagging. Tagging is the same process that helps in conversion to WORD. Without the tagging, you will most likely lose much of what appears to be formatting. Another option would be to save as a DOC file and then use the DOC to HTML that is part of WORD. However, WORD does not generate very nice HTML and that might be a poor way to go.
I used to get reasonable results with HTML 3 export in AA5, but that did not have style sheets at all.
Have you tried checking out the manual for the options? There are some in the preferences as I recall (I would look at AA9, but on the wrong machine now).

I have a fillable form that's already been made. I need to edit fields by moving them and I need to add new fields. How do I do that?

I have a form that was made by someone else. I need to move fields and add new fields in the same box. How do I do that?

If the form was created in Acrobat and you have Acrobat, you should be able to edit the fields by selecting: Tools > Forms > Edit
This is for Acrobat 11. If the PDF has security restrictions that prevent editing or was created with LiveCycle Designer, you won't be able to edit it in Acrobat. If security was applied, you'll need to know the password in order to remove it to allow editing.

Editing files in my catalog and then moving them back. Help.

I want to take a folder of images in the LR catalog on my desktop with me while travelling so that I can edit them on my laptop but, the question I have is, if I export them as a catalog to a portable drive, how do I put them back in the catalog on my desktop once I've cited them so that the old files on the desktop are overwritten with the new changes? I'm sure this is possible, I just want to make sure I get the steps right, thanks

Export to Catalog, now.
Import from Catalog, then.
Try it with a few images in a small pair catalogs, now, to see how it all works, especially what happens if you edit images on the desktop after you’ve split off the travelling catalog, and the import that travelling catalog back into the main catalog after other changes have been made in the travelling catalog. You can verify whether or not the travelling catalog changes overwrite the main catalog or if they are merged, somehow.

HT201272 my file never downloaded properly and i need to re download

i just got a tv show "africa" and i tryed to watch the first one and it asks me to locate the file. i go to the itunes folder where all the other file are execpet the forst epp
what do i do

Does it appear in the Purchased link under Quick Links on the right-hand side of the iTunes store home page on youe Mac's iTunes (tv shows can't be re-downloaded in all countries) ? If it does then delete the entry for it from your library (where you are getting the 'unable to locate' message) and you should then get a cloud symbol next to it in the Purchased link for re-downloading.

Edited file saved as .tiff and I need. jpg

Similar Messages

Maybe you are looking for