Edited Flash Website Template Won't Accept Changes When Published.

Hi, All,
I didn't think this was going to be so difficult. After I purchased and downloaded a "complete flash website template" file from the internet, I uploaded the file into my local_site file and then into Dreamweaver 8
The template included files called Flash.swf, Flash.fla, FlashMX2004.swf and FlashMX2004.fla.
I have been able to customize the flash files in Flash 8 and import them back into Dreamweaver8 but when I publish the site, the changes will not take effect in Dreamweaver8 or on the internet webpage.
I've had this project since September and I've read as much as I could read! (...both in Dreaweaver8 and Flash8)
There is obviously something that I keep overlooking. Am I suppose to be changing something else in addition to the .swf and .fla files?
HELP!
www. freelanceshoot.com
Thanks in advance.

The fla file is what you edit and then you publish it to a swf file. The swf file is what you upload to your webserver.
Are you publishing the fla file and then uploading? If yes, then you may want to double check the location to where you are uploading to make sure that the html page is also pointing to the same location.

Similar Messages

Vendor in Limit Order SC Template won't stay changed when creating PO.

We are currently using SRM 4.0 in an extended classic Scenario. The problem we have experience is as follows:
User creates a SC with a Limit Order template that has a vendor already assigned. Once the template is selected the vendor is then changed along with other information necesarry to create the SC. The SC is then saved and approve and a PO is created. The PO in the backend system (R/3) has the vendor that was originally on the template. When pulling up the PO in SRM the vendor shows the vendor that was originally on the template as well but when clicking on the details button and going into the PO the PO shows the vendor that was changed at the time the SC was created. So the vendor in SRM is correct but the vendor in the backend shows the original vendor which is not correct.
Has anyone seen this issue? Can you not use a template that already has a source of supplier and change it once it's use to create a SC?

Hi Robert,
I think,this issue is already resolved by SAP .
Please look for OSS note on this issue.
I have found notes which may be useful
Note 708047 - Error when transferring items of old limit shopping baskets.
Note 724261 - Limit: Error during creation of local purchase order
SAP has provided an independent component for Limit PO,please give a blank search on that component with component.
component :SRM-EBP-SCL
regards,nishant
please reward point if this helps.

PLEASE HELP - Flash Website template

Hello
I purchased a pretty cool flash website template for our film company and I have edited almost all of the website but I cannot figure out how to get my movie files to appear and play on my Portfolio page.
Pleeeeeease help me. I am willing to send you the website files or you can go to www.discopoetfilms.com .
I just want to figure this out. I am very new at flash so I really need detailed information or step by step.

Hi,
I think most of Flash template use XML file to load media. Look in the folder you purchase if there is an .xml file. If there is one, open it (with Dreamweaver or any other text editing software), inspect the nodes structure and you'll be able to understand how it's built.
Hope this help !
Martin

After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
Step 1
Follow the directions in this support article.
Step 2
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Step 4
Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
☞ Rename login.keychain to "login-old.keychain".
☞ Rename login_renamed_1.keychain to "login.keychain".
You can then close the folder.
Delete the login keychain from the keychain list in Keychain Access. Choose
           Delete References
when prompted, not Delete References & Files.
Select
          File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.
Run Keychain First Aid again. Quit Keychain Access.

Trying to Update Flash player.. won't accept my password.

Hello...i've downloaded the flash. It will not accept my password.

Having the same problem. I don't know what my "operating system administration password" is. Not my Apple or Comcast password. So what is it? I don't see any passwords on my list that appear appropriate than these two and my Adobe password which doesn't work either.

Won't accept password when waking from sleep.

a client of mine is having an issue where her mac won't accept her password after waking from sleep. The same password works when she restarts. She has confirmed that caps lock is off. Any Ideas?
I left her a message trying to find out more details about her computer like OS version and stuff. Will update this when i hear from her.

She still hasn't returned my call, but i know that she is able to type. Whether its wifi keyboard or not I do not know.

How can I edit a website template's background?

I chose a template to start building my new business website. But I want to change the background colors of it and after reading and reading couldnt figure it out. So I chatted with customer support and they told me to ask the question here as css is out of their suppor reach.
Situation:
Picked Forceful template. Im trying to change the black to a carbon fiber image, and the green to a different color.
Is that possible without dreamweaver or additional software? (Im on a budge trying to lunch my business's website with what I do have)

Oh Nicol, I apreciatte your helping me so much!
I did upload the background image I want to css/images/pics.
So, I located the lines you gave me. Below is what lines 1065 to 1086 say.
.row_top {
background: url(../images/top_row_bg.jpg) no-repeat 50% 0%;
height: 401px; }
.carousel {
width: 972px;
margin: 0 auto;
position: relative;
overflow: hidden;
height: 402px;
padding: 37px 0 0;
padding-left: 35px; }
.wide .carousel, .wide_alternative .carousel {
width: 940px;
margin: 0 auto;
position: relative;
overflow: hidden;
height: 402px;
padding: 28px 40px 0;
background: url(../images/carousel_bg.png) no-repeat 50% 0%;
margin-top: -28px; }
Do I have to replace " url(../images/top_row_bg.jpg) no-repeat 50% 0%;" for something else for my image to display instead of the current color?

Crop tool stuck!! Won't accept changes

I'm processing a batch of proofs and midway through my crop tool no longer accepts the changes by clicking on the crop marker button. Doing so only brings the image up in full resolution, clicking again puts it back in crop mode. I can't get this behavior to go away by changing catalog/images/mode, exiting the app or even rebooting.
This is major show stopper. I needed these proofs out last night.

Any chances the image is now an offline one with a ? mark?
Can't edit offline imaages.
I'm think this is not your case, though, or you would hav mentioned something on that.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Mavericks won't accept 'change all' command to open ALL pages files with v 4.3 app

Hello again,
I upgraded my MacBook Air mid June 2013 build to Mavericks at my Apple store. The download was fast, under 30 min., and the installation went well, also fast at about 40 minutes. All apps are working fine. I spent much time before taking the plunge to learn the pros and cons of this upgrade, and the biggest issue for me was the ability to keep using the older versions of Pages and Numbers. The new, watered down versions cannot do what I need. I followed the instructions to select a Pages file in Finder, open the Info pane, and under 'Open with' selected the old version. Then, to apply this to ALL the files, I selected 'Change all...' and 'Continue'. But, it still lists the new version as default. So far, the only fix is to go through ALL my files and manually choose the old version for each. Very laborious. Am I missing something? It seems Mavericks will not accept to change them all for some reason.
Thank you, Cinilla

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

On iPad cannot add new contacts, only edit old ones? Won't accept "done" button when pushed

On IPad cannot add contacts, only edit, "done" button not accepted when pushed, it does let me edit and share.
Help appreciated

Hey Edward, I'm not sure if you're still having trouble with this, but I was struggling with it too, and what I believe fixed it for me was correcting some incorrect MobileMe login info. I guess the contacts were set up to be managed by MobileMe, and since the login wasn't going through, some permissions were disallowed. Anyway, my guess is that you have something misconfigured in an account that's managing your contacts. Good luck!

My mac accepts the administrator's password when i login but won't accept it when i try to install or update applications

hello !
my mac seems to accept my administrator's password when i log in . but refused it when i tried to install a new program, also as i tried to update other apps .
i tried to change the password , but still wont accept the new password . any one has a solution ? thanks !

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Flash menu bar won't show up when i upload the site to the web

I've made a flash e bar using Adobe Flash Catalyst and exported it using "deploy to web". I placed the folder in my dreamweaver site and insert->media->swf and choose main.swf. The weird thing is that it works when i press f12. site: http://martin.venaas.org/ptf/character_vulturous.html
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
     background-image: url(bilder/1063-stylized-minecraft-dirt-wallpaper-wallchan.jpg);
     background-repeat: no-repeat;
</style>
<script src="../Scripts/swfobject_modified.js" type="text/javascript"></script>
</head>
<body>
<table width="1000" align="center" cellpadding="0" cellspacing="5">
<tr>
    <td height="633" align="left" valign="top"><table width="1000" cellspacing="0" cellpadding="0">
      <tr>
        <td height="50" colspan="4" align="left" valign="top"><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="1000" height="50" id="FlashID" title="menu characters">
          <param name="movie" value="../Main.swf" />
          <param name="quality" value="high" />
          <param name="wmode" value="opaque" />
          <param name="swfversion" value="6.0.65.0" />
          
          <param name="expressinstall" value="../Scripts/expressInstall.swf" />
          
          
          <object type="application/x-shockwave-flash" data="../Main.swf" width="1000" height="50">
            
            <param name="quality" value="high" />
            <param name="wmode" value="opaque" />
            <param name="swfversion" value="6.0.65.0" />
            <param name="expressinstall" value="../Scripts/expressInstall.swf" />
            
            <div>
              <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
              <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
            </div>
            
          </object>
          
        </object></td>
        </tr>
      <tr>
        <td width="400" rowspan="2" align="left" valign="top"><img src="bilder/vulturous_main.jpg" width="400" height="600" alt="vulturous" /></td>
        <td width="362" rowspan="2" align="left" valign="top"> </td>
        <td width="238" height="169" colspan="2" align="left" valign="top"> </td>
      </tr>
      <tr>
        <td height="413" colspan="2" align="left" valign="top"> </td>
      </tr>
    </table></td>
</tr>
</table>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
</body>
</html>

I don't see any Flash code in your link.
You do realize that Flash Menus are not web & user friendly, right? They are invisible to non-flash supporting devices like iPhones/iPads, language translators, screen readers and search engines. When people without Flash land on your page, what will they do?
The best advice I can offer is to ditch flash for navigation and use CSS styled text or the Spry Menus that come with DW.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Azure Website restarts due to file change when no file has been changed

Hello,
I have a paid subscription site running at LMFitInc.azurewebsites.net. The site seems to randomly restart throughout the day with no obvious reason. Logs (below) indicate that this is in response to a file change though I'm not changing any files & can't
find anything changed searching by date.
Any thoughts?
<Event>
<System>
<Provider Name=".NET Runtime"/>
<EventID>0</EventID>
<Level>0</Level>
<Task>0</Task>
<Keywords>Keywords</Keywords>
<TimeCreated SystemTime="2015-04-01T01:25:13Z"/>
<EventRecordID>276896843</EventRecordID>
<Channel>Application</Channel>
<Computer>RD0003FF453E2C</Computer>
<Security/>
</System>
<EventData>
<Data>
_shutDownMessage=CONFIG change HostingEnvironment initiated shutdown Change Notification for critical directories. File Change Notification Error in App_Browsers Change Notification for critical directories. File Change Notification Error
in App_Code Change Notification for critical directories. File Change Notification Error in App_WebReferences Change Notification for critical directories. File Change Notification Error in App_GlobalResources Change Notification for critical directories.
File Change Notification Error in bin Directory rename change notification for 'D:\home\site\wwwroot'. File Change Notification Error in wwwroot HostingEnvironment caused shutdown _shutDownStack= at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
at System.Environment.get_StackTrace() at System.Web.Hosting.HostingEnvironment.InitiateShutdownInternal() at System.Web.Hosting.HostingEnvironment.InitiateShutdownWithoutDemand() at System.Web.HttpRuntime.ShutdownAppDomain(String stackTrace) at System.Web.Configuration.HttpConfigurationSystem.OnConfigurationChanged(Object
sender, InternalConfigEventArgs e) at System.Configuration.Internal.InternalConfigRoot.OnConfigChanged(InternalConfigEventArgs e) at System.Configuration.BaseConfigurationRecord.OnStreamChanged(String streamname) at System.Web.Configuration.WebConfigurationHostFileChange.OnFileChanged(Object
sender, FileChangeEvent e) at System.Web.DirectoryMonitor.FireNotifications() at System.Web.Util.WorkItem.CallCallbackWithAssert(WorkItemCallback callback) at System.Web.Util.WorkItem.OnQueueUserWorkItemCompletion(Object state) at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context(Object
state) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback,
Object state, Boolean preserveSyncCtx) at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() at System.Threading.ThreadPoolWorkQueue.Dispatch() at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()
</Data>
</EventData>
</Event>
Thanks,
Geoff

Thanks Aram, I agree that it looks like a full deployment, however I'm sure I'm not deploying anything. I also filtered the files by date to look for anything that might be changing without my knowledge but came up dry.
I'm in the process of setting this up on a VM where I've got full IIS access with the hope of getting more information.
Geoff

Flash .swf file not appearing in browser when publishing from iWeb 3.02

I have been working on a site for the last couple of months that i created in iWeb 2.0 and had successfully had small flash movies that I embedded via html snippets from code provided by numerous sources and youtube videos demonstrating how to get flash movies into one's site.
The url is
www.almafoods.com
Today i upgraded to 3.02 and had to make a change to the home page. The domain opened up fine with all the HTML code and .swf on the page exactly as I had it in version 2.0
When I now publish to a folder, first of all it doesn't copy over the .swf file unless I create a link to the file, but even when I upload all the directories to my ISP's remote server, the movie isn't not showing up in the browser. The html code file and .swf file are in their correct directories on my ISP's remote server
I'm baffled as to what is going on here as its the exact same domain that worked perfectly in 2.0 and this has peed me off no end
Does anyone have any suggestions or encountered the same problem in 3.02?
Any advice would be very much appreciated

Your .swf files are in the same folder as the widget-markup files.
Keep your custom files OUTSIDE the folder with the sitename iWeb creates.
iWeb will overwrite everything when it needs to do that, wiping out your custom files.
Put the files in a separate folder and determine the link to these files.
Read this : Using the iWeb HTML Snippet
Besides that, to display these tiny pictures I wouldn't use Flash.
Read this : Create a Banner Slideshow
And then look at this page : My House

IWeb not saving changes when published to folder

Hello,
I'm very new to iWeb and to the whole web-design in general. My problem is when working in iWeb, and I save (or publish, if it isn't the same) to a folder, it goes fine the first time. But when I republish (I use republish in order to save my project) the changes I've just made i'snt there. When I go to the folder to check my website from the, I can't se changes there. That's very anoying (or how it's spelled )
Here's what I find odd:
ONLY when I restart my computer, the changes are there, and I can see them.
Why is that, and what do I do?
Kind regrds
Palle
Denmark

This may be too late to help you, I've just started to work with iWeb myself and discovered that if you go to the File Menu, you should see the option "Publish Site Changes", Click that and it will save the changes.
I've also noticed that the pages in the list on the left are 'red' if you've made changes to them and haven't published the changes, and blue when you have published.
(I'm also publishing to a folder for now)
Elizabeth

Edited Flash Website Template Won't Accept Changes When Published.

Similar Messages

Maybe you are looking for