Edited Recording jumps back to the beginning after crop

I have several recorded Connect meetings that have been lightly edited. The first few seconds have been removed and, on some, a few seconds in the middle have been cropped out when the speaker flubbed a word or two. I am finding that, on the ones with mid-recording crops, the playback jumps back to the begining for a few seconds and them catches up and contimues normally. Is this just a limitation of the Connect editing mechanism (as limited as it is)?
I have tried to leave the beginning alone and just crop out the middle and it still hiccups when it hits that section. Any thoughts on this?
Thanks!
My Connect version info:
7.0,723
Connect 7.0 r. 723/c. 427912/b. Fri Jun 27 15:37:57 2008
Presenter r. Presenter7GM
FMS r. Mustang_Connect 3_0_0_1208
Licensed

Hello,
You can set a timeout to handle what happens when no one
interacts with the computer for a certain period of time. In your
startMovie script, add
on startMovie
the timeOutLength = 60*60 --Add a length here. It is in 60ths
of a second, so 1 minute is 60*60
end
Then, in a movie script, add
on timeOut
--Put your script here
go to frame 1
end
That should be it. I realize you don't speak English well,
but this should put you in the right direction if you don't
understand it all.

Similar Messages

Downloaded talking book - it goes back to the beginning after a few minutes

Hello. I downloaded a "talking" book today and after it starts, it plays for a few minutes then bounces back to the beginning of the book. When I look at the downloaded numbers, it appears that the whole book was downloaded!
I've never had this happen and would really appreciate any help. Is there a way to download it again with out getting charged for the same book twice? Thanks for any help.

I would recommend using this article to report the issue to the itunes store, they will be the best place to get that resolved as it may be an issue with the content
can also attempt to transfer it to a computer and play it on there, if the issue persists it would verify it being content, if it doesn't it could be an issue with settings on the iphone but that I cannot verify
http://support.apple.com/kb/HT1933

Back to the beginning after some time

I am holding a director in the software for a multimedia
kiosk but encounter me with the problem that I am not able to solve
what I want is that when a user leaves the navigation through the
software by the end of a time without being used (for ai 1 minute)
go back to the beginning, that is the frame 1 .. So while others
used to go to the kiosk application is the beginning ...

Hello,
You can set a timeout to handle what happens when no one
interacts with the computer for a certain period of time. In your
startMovie script, add
on startMovie
the timeOutLength = 60*60 --Add a length here. It is in 60ths
of a second, so 1 minute is 60*60
end
Then, in a movie script, add
on timeOut
--Put your script here
go to frame 1
end
That should be it. I realize you don't speak English well,
but this should put you in the right direction if you don't
understand it all.

Imovie song does not start at the beginning after I edited the duration of the clip

my imovie song does not start at the begining after I edited the duration of my clips. The audio clip now starts in the middle of the song. This is occuring with the second song in my video. How do I adjust the audio to start at the beginning of the song.

For pop ups. From your Safari menu bar click Safari > Preferences then select the Security tab.
Select: Block pop-up windows
safari starts always with top page even I have apple.com as a starting window
Back to Safari > Preferences. This time select the General tab. You can reset your homepage from there.
history its not saving or at least not showing when i press the thingy that looks like a little book on the tools bar
That icon represents your Bookmarks not history.
To view history, from your Safari menu bar click History > Show History
Or Option + Command + 2 on your keyboard.

(1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??

(1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??
I type Sandi Patty. It changes it to Sandi patty. (Little "p") There are some pics in there correctly capitalized and some that aren't. So, I deleted all the faces with incorrect spelling hoping to clear the system of that name completely. Didn't work. As you type Sandi, all the choices, including the one with error in capitalization show up. I type it CORRECTY -- Sandi Patty -- I click on another face and the Sandi Patty becomes Sandy patty. (Little P) There are other names in the list that were the result of bad spelling. Can these NOT be deleted??

Not at this time, I spent an hour on the phone with Apple support today on this topic and they could not locate the files necessary to delete names from the list. Bummer

The new forced upon me upgrade for iPhoto '11 never opens. After I do all that is recommended, it sends me back to the beginning. How can I get it to work?

I am using a mac mini version 10.9.5 which I have just updated. Now when I try to open i photo, all I get is a message telling me to "prepare" my library. I have installed and run the iPhoto library upgrader, but it only sends me back to the beginning telling me to install the upgrader (which has already been installed.)
How can I actually get the upgrader to prepare my libraries and actually see photos?

What version of iPhoto are you currently running and what version did you have previous to the upgrade to 9.5.1?
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

When I cull through my images in the filmstrip everytime I use my right arrow and rate a photo it jumps back to the first thumbnail and i have to arrow all the way back to where I left off. Is this a setting issue

Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference...

Film jumps back to the start

When I play the film I edited and burned on DVD using DVD Studio Pro 4, in the middle of the film it suddenly jumps back to the very beginning of the film starting all over again. I set 18 chapter markers to divide the track and the point where it jumps back to the start is at one of the chapter markers. Is there something wrong with the settings of one of the markers? If yes, how can I change the settings so the film won't jump back to the start?
Thank you very much for your help!
John

Look at that marker's properties in the property inspector (click in the marker) and check whether there is an 'end jump' set on it. If so, remove it...

My iPad jumps back to the desktop when using a page or app

My iPad (original) jumps back to the desktop when using Safari or an app. Any fixes? This is my second original iPad. The first one did the same thing.

If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 10 minutes or so.

How do I refresh an animation so that it resets back to the beginning?

So I created a drag and drop animation where the elements dissapear after they are dragged onto the target. I want to include a reset button that sets the animation back to the beginning so the user can play the drag and drop game again. Is there code I can include that resets the animation the same way that happens when you hit the browser refresh button?

Here is my current code, the draggable objects aren't set on the timeline, they just live on the stage
   function init(){
   // apply the draggable JQuery UI plugin to the Symbols on the stage
   sym.$('TIF_sym').draggable({
   start: function(e){},
   drag: function(e,ui){}
   sym.$('DXF_sym').draggable({
   start: function(e){},
   drag: function(e,ui){}
   sym.$('DWG_sym').draggable({
   start: function(e){},
   drag: function(e,ui){}
   sym.$('SHP_sym').draggable({
   start: function(e){},
   drag: function(e,ui){}
   sym.$('DEM_sym').draggable({
   start: function(e){},
   drag: function(e,ui){}
   // apply the droppable JQuery UI plugin to the Symbols on the stage
   sym.$("DataLayerObject").droppable({
   drop: function(e, ui) {
             // Hide Target Element Grey Box.
             sym.$("FirstDrag").hide();
             sym.$("Text").hide();
             // Hide file box
             var hideEle = "#" + ui.draggable.context.id;
                       console.log(ui);
                       $(hideEle).hide();
             //Play timeline for each data layer when correct file is dragged onto object
             sym.getComposition().getStage().getSymbol("DataLayerObject").getSymbol($(ui.draggabl e).attr("id").substring(6) + "_layer").play();

I recently upgraded my iPod Touch G4 with IOS 5. However, I cannot use album arts to select my songs any more. Every time I try to do it, the screen will freeze and jump back to the normal Apps screen. What can be possibly wrong?

Does anyone has the same issue after IOS 5 upgrade?

I have experienced the same issue with my 32gb 4g touch since upgrading to IOS 5.
The problem seems to be caused by very large album art graphics. When the album art screen freezes and the ipod jumps back to the apps screen the ipod app is actually crashing (presumably caused by a memory issue).
The short term solution I found is to simply reduce the size of the album art graphics files used (via itunes). Since I have reduced the file sizes of my album art the ipod app has not crashed.
There does still seem to be an issue with the smoothness of the cover flow app which is much more laggy and jerky since the ios5 upgrade - this was reported during beta testing so hopefully apple will address this issue.

Sometimes while typing my mac jumps back in the sentence and starts typing there

i will be typing something and all of the sudden my mac jumps back into the middle of my sentence and continue typing , messing everything up. any idea what is causing this....

Welcome to Apple Support Communities.
Do you have a removable battery? Check to see if it is beginning to bulge. A bulging battery can cause keyboard and/or trackpad to malfunction as you've described.
Unfortunately, the bulging is not covered under warranty. It is a sign that purchasing a replacement battery is in your future.
You can check your relative battery health and number of charge/discharge cycles here:
, About This Mac, More Info..., Power
(I'm on OS X 10.6.8, so my Battery Information display will appear a bit different than OS X 10.5.8.
And yes, that 'Replace Now' message means my currently-installed battery no longer holds a charge.)

Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7)

Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.

What do you mean "doesn't recognize"?

Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?

Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?

Turn Settings > General > Accessibility > Zoom to ON.

How can I get Firefox to take me back to the last Bookmark folder I was in like Internet Explorer instead of going back to the beginning each time??

When i find a website using bookmarks in Firefox and then I want to look at another site in that same folder, especially in a subfolder, Firefox takes me back to the beginning of the bookmarks menu. With Internet Explorer, it takes me back to the same folder or subfolder I was in. For example, if I was wanting to search newspapers, especially if they are in subfolders, I want to stay in that same place. Firefox loses that place, unlike Internet Explorer, and takes me back to the beginning each time. Sometimes I have several layers of subfolders and it takes time to find that place again each time.

A possibility is to open the Bookmarks Sidebar.
Click the list icon next to the star on the Navigation Toolbar and click "View Bookmarks Sidebar" (Ctrl+B).

Edited Recording jumps back to the beginning after crop

Similar Messages

Maybe you are looking for