Editing 32bit Tiffs not possible ?

I have a 32-bit tiff file I want to edit, photoshop is only displaying a single black image. Opening the levels panel shows a single spike in the levels for black, white and gray are non-existent. Opening the image in RAW shows an ugly blotchy image, nothing of what the original image I know should look like. I was hoping in PsCC-2014.2 this would be possible, can anyone shed some light on this problem, thank you !

Ok, the file opens without any errors - but the values in the file is very, very near zero (+- 0.0002 or so), and displays as pretty close to black by default.
Because it is less than 1/255, Levels shows it as all black until you scale it up quite a bit.
You can change the display scaling with the slider at the bottom left of the image window, or View -> 32 bit Preview Options
An exposure of about +11 makes the waves visible, though the negative values will be clipped to black.

Similar Messages

Fluid grid template - editable region - resize not possible

Hi,
After quitting DW the first resizing problem was gone.
Now I saved the page as a template and inserted an editable region.
Then it wasn't possible anymore to recize the divs.
The lines are know yellow dotted.
Do I have to make editable regions in a different way?
See: http://www.ifacilityservices.nl/index.html
Thanks again.
Carla

Hi Nancy,
Thanks voor your reply!
Is it now not possible anymore?
I deleted the editable regions, but it stays with the yellow lines.
Carla
Van: Nancy O. [email protected]
Verzonden: zaterdag 24 augustus 2013 21:59
Aan: Carla Leliveld
Onderwerp: fluid grid template - editable region - resize not possible
Re: fluid grid template - editable region - resize not possible
created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in Dreamweaver CC - View the full discussion <http://forums.adobe.com/message/5623512#5623512

Premiere elements 9: editing of Projects not possible

I bougth a laptop with adobe premiere elements 9 installed. It worked very well until a crash of the hard drive.
I baught a new hard drive and installed all software on the new drive. Premiere elements 9 was insalled without any failure. It can be opened but I can not edit or create any project. Most of the menue items are shown gayed.
Can anyboy help?

rreekkuu
This is what I would like you to do to troubleshoot this issue....
Make sure that the issue exists with and without the antivirus and firewall(s) disabled. Then if that did not help...
Uninstall Premiere Elements 9 via the usual Control Panel route.
Do a free ccleaner run through (regular cleaner and registry cleaner parts)
https://www.piriform.com/ccleaner/download
Reinstall the program with antivirus and firewall(s) disabled.
Keep the program closed.
Download and install the 9.0.1 Update (Premiere Elements 9 remains closed while this is going on.)
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
Reopen Premiere Elements 9.0/9.0.1, and open a new project in the Timeline workspace. So far so good or not? Hopefully, OK, but if not OK....
Delete the Adobe Premiere Elements Prefs file, and, if necessary, the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
If is not going to help the present situation (that is just trying to install), but your 6 GB installed RAM is not a factor here since that Premiere Elements 9 or 9.0.1 is a 32 bit application running in a 32 or 64 bit application and as such has all the limitations of 32 bit system - maximum supported installed RAM = 4 GB of which typically 3.2 to 3.0 GB of that are available.
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thanks.
ATR

While I'm in BC Admin Console, the 'EDIT' button is not working.

Online editing is therefore not possible. How to resolve this?

Take the issue up with whomever replaced the device, whether that is Apple or another company.
There is nothing that we, your fellow users, in these user to user support forums can do for you.

Editing a TIFF Original not kicking off Re-Publish

When I modify a TIFF Files in a smart collection that is in a SmugMug Publish Service (items selected by Flagged and From a specific Folder), they do not come up as needing to be re-published. Files that are still DNG files, trigger the republish, but TIFF files do not. Interestingly, being in the smart collection does not show up as collections that file is part of (regardless of DNG or TIFF). If I modify the TIFF in lightroom, that will trigger the republish, but not if I just edit the TIFF in CS6 (edit the original).

I ran into the same problem using the pattern for expected state detection:
/Person[DetectedRulesList = Set[ObjectID='<GUID of the Set with the DREs>']/ComputedMember]
Pasted from <http://technet.microsoft.com/en-us/library/ff608269(v=ws.10).aspx>
My users weren't transitioning into the set when they got a DRE. Went on a wild goose chase until I saw this post. Enabling the
FIM_MaintainSetsJob fixed
the problem. Pretty frustrating...

Editable column in ECM(compensation) not possible,but what happens in EHP4?

Hi all,
I've been reading in the forum that it's not possible to create an editable custom column in the ECM Compensation and of course I haven't been able to get it.
But, I'm working in MSS 6.0 EHP2, does anyone know if it is going to be possible to do this in EHP4?? I know that the funcionality of ECM in EHP4 has been increase a lot.
Any news about it??
Thanks,
Juanjo

I am a little confused because this is an editable region called "head" that makes changes to the footer. I don't think i will be able to explain WHY this is so for a while, but at least i will be able to see what is wrong and give the solution.
You are embedding a stylesheet in the editable region called 'head'. That stylesheet sets the style for the element called "footer" by specifying the background image to be used. It's quite straightforward.
What was really freaky: entering the url for the background image in the style sheet as "/path/to/your/image.jpg". Lordy i didn't think that could be the literal thing i was supposed to enter!
It's not. You were supposed to alter that to match the path from your site's root to the desired image.
Where did you find this gem of information?
It's just basic CSS, really.

Editing sound in PP CS5 using trial of Audition CS5.5 not possible??

I have PremierPro CS5 and downloaded a trial of Audition CS 5.5. The option "Edit in Audition" in PP CS5 is greyed out, so I cannot test the sound editing interaction between the two PP and Audition. What is wrong? Is it not possible to use PP CS5 with Audition CS5.5, is it not possible in the trial version of Audition, or am I doing something else wrong...?
Greatful for your time and help!
Håkan

The connection only works if the Premiere version number is the same as, or higher than, the Audition version. So, in my system PPro CS5.5 to Audition 3 is OK, but PPro CS5 to Audition 5.5 is not, as you have found.

HT201210 i tried to jailbreak my ipod 4g 6.0.1(523) but was not possible. now i cant restore it becouse say i cant restore my ipod error 3194. i try to edit hosts on win32 but was unsuccesfully. anybody help me please :(((((

i tried to jailbreak my ipod 4g 6.0.1(523) but was not possible. now i cant restore it becouse say i cant restore my ipod error 3194. i try to edit hosts on win32 but was unsuccesfully. anybody help me please :(((((

Jailbreak discussion is not allowed in forum.
And you have learned the risk of jailbreak.

Editing not possible because 'Request flag' has value X

When i try to change an number range settings from number range administration, i get an error "Editing not possible because 'Request flag' has value X "
how can and where can i remove this flag from?
Thanks

Hi Tuncer,
I am not aware about the GUI table interface through which you can change the flag.
But i guess there is an option
Go to transaction se11 --> write /AIN* in the table name field.
You will find all the table names related to SAP AII. In the search list now available to you, search for the word "Number".
Then you will find all the table names related to number ranges.
Here you can search the table which will be having that flag field. If you find this table,
go into that table and make that entry manually.
Here is what i can suggest you immediately to solve your problem
please rvrt for other questions.

Load, edit or delete PDF presets in CS6 InDesign not possible.

Load, edit or delete PDF presets in CS6 InDesign not possible, it says: The folder may be write protected.
How do I solve this problem? I also work with Adobe Acrobat Professional X.

OK.
Lets back up a bit and take things step by step so we all know exactly what's going on, and what you've tried and haven't tried.
First, what version of Windows are you using? The use simple file sharing is the very last option on my system (XP Pro) if you open Explorer and then use Tools > Folder Options > and select the View tab. This is also the tab where you will need to make hidden and system files visible, and I strongly recommend showing extensions for known file types as well. As far as I know this option (not to use simple file sharing) is available in XP home, too.
Second, once you've taken care of the first part, please do a search using the search in Windows Explorer, for *.joboptions under all files and be sure to select more options to search hidden and system files. You may find these files in more than one location, but the bulk of them will be in \Documents and Settings\All Users\Documents\Adobe PDF\Settings (note that this is the same directory as the one in the tree called "shared documents" -- I have no idea why the name is displayed differently in the folder tree than in the path in the address bar). Right click on one of those and select "Open Containing Folder" option.
The folder should open in a new window. Click the go up one level button in the toolbar (looks like a folder with an upward arrow on it), then right-click the settings folder icon and select either Properties or Sharing and Security (both open the properties dialog) and click on the security tab.
At this point, in all probability, the allow options are all grayed out because they should be inherited from the parent object. On my system the only user listed is "everyone" and they have full control. If yours is different, please let us know, and we'll go from there. If it's the same we'll try something different.
Peter

I updated IOS7 today. I am not satisfied and would like to go back to my old edition. Is that possible?

I updated IOS7 today. I am not satisfied and would like to go back to my old edition. Is that possible?

No. Apple does not support downgrading to iOS 6 or earlier.

Blend for z10: edit conctact not possible

Hello together,
I am using a BlackBerry Z10. I tried to edit my contacts via Blend. Unfortunately it is not possible to edit my excisting conctacts via Blend.
Any help would be appreciated.
Thanks.

That is interesting. Can you show me how you can add a contact in BlackBerry Blend please?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

After installing iOS5, it is not possible anymore to edit the contacts. Has anybody a solution?

After installing iOS5, it is not possible anymore to edit the contacts. Has anybody a solution?

Settings-iCloud-contacts=on.
Reopen contacts, should b able to edit and add.

I have used Lr many years without problems. Now it is inpossible to edit . Can not see the editing in main window only in the small thumbnail. Suddenly it is not possible to import raw-files from my Linux camera ( it worked earlier)

Editing mode does not work. I can not follow de editing in the main window. I cah see it in the thumbnail.

From your description of the problem, I suspect that you have a standalone license but have downloaded and installed the CC update. Or, it's the other way around. In either case, you need to install the right version.

E7-00 contact edit: not possible to paste a phone ...

Gentlemen,
As said in the topic, it's not possible to paste a phone number together with the + sign in front of the country code. Instead you need to add + manually and paste the rest of the number. It means that when selecting the phone number text you need to make sure you miss out the + sign before hitting CTRL-C.
PR1.0
SW: 013.016 / 2011-01-27
Language set: 013.016.24.01
Is it common?
Since 1610

Don't know if this is a solution as I only have personal Email on my phone, but when I set the email widget it is populated by Hotmail account (the first one I set up, and coincidentally my main email address) then if I chose inbox within the widget I can open and view my Ovi Mail account, which I use a lot less. My theory being , that if you were to remove all your mailboxes and then set them up again, setting up the mailbox you want as default first, it may be close to what you actually want !
Hope someone can give you a better and more technically approved solution,
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Editing 32bit Tiffs not possible ?

Similar Messages

Maybe you are looking for