Editing a live recording

I record live board mixes of my band to a Tascam CD recorder.
I would like to know how to use garage band to edit these recordings.
How to import materail to GB correctly.
Example:A tune may have singer yaking away before tune actually starts and want edit him out
My goal is to make a best of compilation.
Also one Cd ,soundman never used track markers so Cd is one track about an hour long.
Can I use GB to seperate songs?

For editing audio, use an audio editor
http://www.thehangtime.com/gb/gbfaq2.html#audioeditors

Similar Messages

Live recording and adding latency

Hi all. I'm wondering if anyone has any insight and bright ideas.
I've set up a live in-place auditorium video recording system, which right now has the following paths:
Mixer --> Beachtek adapter --> remote HDV camera --> Mac
So, the audio is good quality, sent by balanced cables to the camera, and the complete audio/video is sent to the computer by firewire. The camera never actually uses a tape. This works pretty well, but relies on the camera's ADC. I can hear a little difference between the mixer sound and the sound coming back by firewire. Ideally, I could send the audio into the Mac's optical port instead. But, DV/HDV have a latency of about .8 seconds, making the audio and video out of sync.
So, any way of adding latency to the audio, rather than fixing it in post? Students may have to run this system.
Thanks.
Jeremy

Hi David. When I am capturing live (recording to disc) from a camera, the image on the cam lags real life by a little bit, about .8 seconds. For instance, turning the camera will result in the preview moving a little later.
If you get to Cookeville at all, you can check out the installation.
Jeremy
PS To clarify, I am talking about recording video via firewire and audio via something else, such as optical in or a USB sound interface.
Message was edited by: Jeremy Hansen

How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
Scott

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Pages which base on a Business Catalyst template are not editable in Live-View?

As long as the page is not a template, all these neat new edit-features of Dreamweaver work without problems. But as soon as I create a template and define an editable region with the Business Catalyst Tag {tag_pagecontent}, the content put inside this regions is no longer editable in Live-View. Is this a bug or has it just been forgotten to implement?

Pleaes restate your problem's symptoms, and include some code
to
demonstrate.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Cole_Marie" <[email protected]> wrote in
message
news:en3lqg$3jk$[email protected]..
> Did you ever resolve this issue. I'm having the same
problem. Using DW8
> , XP.

Why is "live recording" showing under TV shows?

I just noticed that on my Apple TV, under TV Shows, there's a new listing, "Live Recording". It just showed up today; it was never there before. In my computer, there is no "Live Recording" under TV Shows. It appears that this is something Apple has thrown upon us without not even an explanation of what it is or what what it's supposed to do. Does anyone know what this is? Thank you.

You haven't got an EyeTv that's automatically added a recording to TV shows have you with a cryptic name?
It may be something new in itunes 8 but I've not upgraded yet.
AC

How to avoid editing a deleted record in a Table component

Hi! Everyon,
I am building a prototype using JSC. In Page1.jsp, I have a table displaying the records. On column one there are buttons that allow the user to edit the record, including deleting it. My problem is: when somebody else deleted a record and if the current user tries to edit the same record by clicking the edit button on the corresponding row he will get the next record. Could somebody tell me how to solve this problem? Thanks in advance.
By the way, I do not access database directly from the Web part. Instead, I dropped a session bean's method on the Table compoment. In the edit button's event handler, I use
           TableRowDataProvider row = (TableRowDataProvider )getBean("currentRow");However, since that record was deleted already I always get the next record.
With best regards,
Daniel

Thank you very much for your help. And sorry for not explaining clearly.
I have a session bean that has getCities(), getCity(String code) and other methods. getCities() returns an array of CityDO objects and getCity(String) returns a CityDO object. class CityDO basically is a JavaBean containing city code, city name and other information. When I designed the web part using Java Studio Creator, I dropped a Table component to the design view first, then dropped the EJB method getCities() onto that Table component. Up to now, it is very similar to http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/ejb.html and everything worked fine.
In order to edit a CityDO record, I added a column containg "edit" buttons into the Table component. If the user clicks the edit button we will show the CityDO in another page called editPage.jsp. In editPage.jsp, the user can update the city or simply delete it. Here is the major part of the event handler of the edit button in Page1,
    public String editCity_action() {
        TableRowDataProvider row = (TableRowDataProvider)getBean("currentRow");
        String code = (String)row.getValue("code");     // "code" is a field in CityDO
        CityDO city = null;
        try {
            city = cityClient1.getCity(code);
        } catch (Exception ex) {
            ex.printStackTrace();
            return null;
        getSessionBean1().setCity(city);          // pass the city to editPage
        return "editPage";
    }Usually, the above logic is good. However, if somebody else deleted one city and the current user tries to edit that deleted city (it is still in his table), he gets the next city. The real problem is in editCity_action(),
row.getValue("code") returns an updated value, but I only need the old one.
You memtioned ArrayList. That could be a good solution. Suppose I have an ArryList containing the CityDO objects, if I can bind the table to my ArrayList that will solve my problem. Could you tell me how to do the binding in that case?
Thank you again.
With best regards,
Daniel
By the way, I do not access database directly from
the Web part. I do not understand what you mean by the above
statement.
Instead, I dropped a session bean's
method on the Table compoment. Can you explain further. What method did you drop on
the Table component?
In the edit button's
event handler, I use
TableRowDataProvider row =
(TableRowDataProvider
)getBean("currentRow");However, since that
record was deleted already I always get the next
record.Here is the delete code from
http://developers.sun.com/prodtech/javatools/jscreator
/learning/tutorials/2/inserts_updates_deletes.html.
As is is working on the rowkey in the page bean's
table, that should not be affected by other users in
other sessions, the rowkey should not change, even if
the underlying record has changed.
    public String delete_action() {
form1.discardSubmittedValues("save");
try {
RowKey rk = tableRowGroup1.getRowKey();
if (rk != null) {
tripDataProvider.removeRow(rk);
tripDataProvider.commitChanges();
tripDataProvider.refresh();}
(Exception ex) {
log("ErrorDescription", ex);
error(ex.getMessage());
return null;
}What is the underlying structure for the table's
data. Is it a row cache from a query? Is it an
ArrayList?

Edit the error records in error stack

Hi,
I want to edit the error records in error stack. There are around 300 records in error stack . I want to replace the value in one field with blank to correct the records. Can you please help me how to replace the value with blank.
Thanks,
Priya

Hi,
Open the original DTP and click on change.
1) In Update you will find "create error DTP", just click on it system automatically create error DTP for you original DTP.
2) Do not change any thing, just come back to your original DTP and activate your DTP again.
Now come back and refresh the info provider tree.
now execute your DTP, request will be green in target and you will error records in error stack.
How to edit the error records in error DTP
please find the doc.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0406328-29c7-2e10-5db5-afe9b5695eeb?overridelayout=t…
Thanks,
Phani.

HT204406 I recently uploaded a live recording to match. Plays when I listen in "recently added" playlist, but will not play in a new playlist "ineligible" cloud symbol appears

I recently uploaded a live recording to match and it appears (and plays) under "recently added" on the left menu. When I create a new playlist for this music it won't play and has the "ineligible" cloud symbol with slash through it. It must be in the cloud as it's playing now, but the content will not play if moved from "recently added" into a playlist. I'm puzzled. Any help?
Bit rate is 192 kbps
it is an mpeg file
Thanks in advance!

I just went back and used Tunesify to convert from mp3 to aac format and it's working now. I've added over 20K to my match library and this is the 1st time something like thas has happened.

Editing "service Activities" records on Mobile express CRM 2011

Hello,
I was wondering if there is a way that we can edit service Activity records on mobile express crm 2011. I was able to configure such that we can see the records but they are read only we cannot update or edit those records.
Please advice.
Thanks

I added Notes to mobile express and I can add notes to service activity. So, that's exactly what we wanted but you cannot directly edit service activities from mobile express.

Equalizing Live Recording in FCP

Hello,
I am seeking any advice about equalizing sound using the graphic equalizer in FCP 5.1, after recording a friends Jug band (acoustic & homemade instruments) at a bandshell outdoor live recording with a single wireless Sennheizer cardiod microphone gaffer taped to the center floor on small stand pointing up. I videotaped it with my Panasonic DVX 100A on both channels and had to fairly boost the gain but got an o.k. level most of the time.
As you can tell this is not intended to be a professional piece for my friends, but the vocals and the instruments are pretty much competing as you might guess. They use guitars, acoustic kettle bass, drums; cymbals, jugs, harmonicas, ukuleles and they harmonize (vocals) often. Kind of R. Crumb material. I have tried this so far:
Rolled back 60-100Hz (2-3db)
Boosted a little 125-250 (2-3db)
315Hz (+1db)
Roll back in a curve 600-1000 (1-3db)
Keeping curve
Boosting at 2K to 4K (2-3db)
5K (+2db)
6K (+1db)
Flattening out at 8K
If anyone else has any comments about what you might have found helpful please let me know. I have worked with sound for a while but any helpful experience and advice would be great thanks. I just want it to sound good for my friends... thanks
peace

hey there alchemy,
there's not much you can do, as it seems you started w/ poor mic placement. is this the same curve on both audio channels? if so, try a different curve on one that accentuates the vocal range between 2K-5K, depends on voices-some may be lower, some may be higher- you'll have to play w/ it, that's just a general range for voice & reduce it on the other, then pan one channel more to the right, the other more to the left, also raise the overall level of the audo channel w/ the vocals accentuated/reduce the instrument track. don't have much else in the way of suggestions.
i've done live sound & recording for about 28 years & for the next time get your mic closer to their mouths, if they're all singing into one mic-like what is done w/ traditional bluegrass music, attach/tape yours to that stand if possible, put yours on a floor stand near that one if possible, off the stage in front of them(if the stage isn't too high) or put it on a stand closer to the SR(sound re-inforcement) speaker, but not so close as to blow it's capsule/diaphragm or even ask the audio person if you can get a feed from the board. i've made some quality recordings w/ a stereo pair-for that i like Audio Technica AT-822 or 825 stereo mic, if you have more $$ the Shure VP88. like lighting you may need a variety of tools to get the job done-i have a mic locker that includes a $30.00 Radio Shack stereo mic(no longer made) that does a decent job for the occasional theater shows i shoot for myself/friends w/ my consumer miniDV, but i also have some more expensive $500.00 LDC mics, a range of dynamic/vocal mics & SDC mics as well as a variety of recorders & mixers. check out Shure, AKG & AT websites as they offer info about mics & placement, w/ a slant toward their own gear of course.
good luck, hope this helps.

Live Recording stops after exactly 30 minutes

hi all
i have cucm 7.x when i activate live record it stops after exactly 30 minutes and i dont recieve the voicemail, if i end the call prior to 30 minutes i DO get the voicemail just fine
where is the restriction ? and what could be the reason that i dont get the 30 minutes recording?
thank you all

Hi Eliran,
Check
https://supportforums.cisco.com/message/3027944#3027944
Cheers!
Rob

CME Live Recording Working but get a "Live Record has Stopped" message

Hi All,
I've configured Live Recording and its working perfectly.
However, when you press the LiveRcd button, you briefly get a message "Live Record has Stopped". (It does record the conversation and delivers it to my mailbox).
Is this normal?
Many thanks,
Ernesto
Cisco 2821 IOS 12.4(20)T
Cisco Unity Express 7.0.1

You might be hitting this bug:
CSCsq79034
Wrong Display while using LiveRcd softkey
Symptom:
If the call is active between phone A and phone B and phone A presses
the softkey LiveRcd , then the call is recorded however the display
says " Live Record has stopped" which is mis-leading to the users as
they feel the call is not recording but it actually is recording and
phone A gets a message after the call is disconnected.
Conditions:
its a cosmetic bug
Workaround:
Now if the call is active beween phone A and phone B and phone A presses
conference softkey and dials 9200 and presses conference softkey again ,
the call is recorded and phone A gets a message
HTH
java
if this helps, please rate

Live Record issue on Unity Connection 8.5

We have the CoS for Live Record set to a maximum message length of 3600 seconds but our recordings are cutting off at 20 minutes exactly. We are using a single inbox solution with Exchange 2010 and there are no mailbox size limits on the users. Any ideas?

Hi,
Under Cisco Unity Connection Administration webpage Under System Settings >> Advanced >> Telephony >> Maximum Recording Time in Milliseconds; check if this value is 1200000 (20 minutes); if yes then change this to 3,600,000 milliseconds (1 hour).
HTH
Manish

URGENT! Missing audio files from a live recording due to Logic crash

Hi,
yesterday, in the middle of a (low budget) live recording, Logic gave me an error message saying "disk too slow" and stopped recording.
I was using the internal drive. I know this is not a proper habit, but I would have never thought that Logic could complain about the drive slowness with 2 tracks/24bit/44,1khz. Instinctively I pressed * at once but this caused the sequencer to start recording back from bar 1, making the previous 27 minutes of recording disappear, even from the audio files directory.
Is there anything I can do to recover the two AIFF files and avoid lots of swearwords from the customer?

Thanks for the sympathy musicspirit...
About Logic crashing... Actually, Logic didn't "crash", that is, the application didn't quit. It only stopped recording, displaying that "disk too slow". If truth be told, the timeline remained red, it stopped recording the two tracks. Then I pushed the "record" key and it started recording back from bar 1. As soon as I realised that it wasn't displaying the previous 27 minutes of recording anymore, I stopped the transport and something even more strange happened... Logic rendered the overview of the newly recorded two audio regions and started prompting error messages about one of them being an 8-bit audio file. Moreover, I had the Roger Nichols Inspector plugin open and in the meantime it went crazy too, displaying "9999" in the clips/consecutive clips/etc. counter.
I was listening with my headphones plugged into my Fireface and I can tell you that the audio coming from the soundcard was perfect during the Logic "crash". It never stopped, clipped, popped or anything similar.
About the audio path, audio file name... I always double check the audio recording path before starting a recording and it was exactly where it should be.
After the crash I recorded the second part of the gig on an external FW hard drive and everything went smooth. I simply can't find the audio files of the first 27 minutes anywhere on the drive. However I found out pieces of them with Data Rescue II among deleted files, but they are corrupted (interrupted by pink noise and square waves - BTW I plan to save one of them labelling it with "how an audio file dies").
It is really strange that such a powerful program (as Logic is) doesn't save an audio file if for some reasons it stops recording and you press record again...

Editing a live recording

Similar Messages

Maybe you are looking for