Editing a post with '#' cuts the rest of the line

I don't know if it my error,
When I edit a post where inside there is a #(pound character) trailers character after it cut off. (It happens, above all, in links)
Is it my error? if yes, how can avoid it?
and excuse me for simply question,
How can I write a link as questo link instead of http://.........
what are character prefix; before and after
Thanks for help
Regards

Ok thanks anyway I solved.
I found answer from PaulM. (thanks Paolo)
I just wondered how I can post links in these messages. I saw other people doing it. So instead of typing the URL making it a real hyperlink like in a normal html page.
Editing a post with '#' cuts the rest of the line
[url http://forums.oracle.com/forums/post!reply.jspa?messageID=1793743]This thread
[url http://forums.oracle.com/forums/post!reply.jspa?messageID=1793743]This thread[url

Similar Messages

Cut the line coming from outside Verizon ONT

My painter cut the line (Fiber Optic cable) coming FROM outside to the Verizon ONT. How much will Verizon charge me for the repair ? If too much, I will consider early termination, but how much is the ETF then? Thanks

I would think it doesn't matter ... your painter should pay or reimburse you for any costs associated with the repair if Verizon charges anything.

How do I cut the lines to get the circular edge?

What I'm asking is how to make my lines have that circular edge like the inside of these lines.. I'm sure its some pathfinder tool where you lay a circle on top of the lines but I can't seem to find the correct order to get this look... Any advice? P.S. I'm still tweeking the colors and such so.... AND the larger circle is the one i was trying to use to cut the lines...

Group your lines together
Draw a black circle on top (black will be your color to make things invisible)
s
Select both
Transparency >> make opacity mask, use these settings
Note: there are 2 squares in the transparency palette.
Left Square highlighted (as shown above) - edit art
Riight square highlighted - edit the mask

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

How to edit a post here in the forum?

I have noticed several posts in which the original author of the post went back into it to edit it.
How is that done? There have been many times I wanted to go back and edit.
Thank you.
Lorna in Southern California

Jabberwock, the experiment went like a slide on ice.
I did say that I would return in 15 minutes to edit a second time, but I got tied up in other things and returned to my office in about 40 minutes. I clicked onto my post as it existed in the forum list, but when it came up, it did not have that icon of the pen, so I figured that too much time had elapsed and I just let it go.
Lorna in Southern California
Edit: Oh oh. I think I discovered what might have happened. When I sent this message to be posted, a copy of the message remained "behind." THAT message had the pen icon on it. So my mistake was to go to the forum topic list for my message rather than to return to that particular page that acts like a holding tank for messages that I recently posted.
I might be way off base here, and if I am I hope someone clarifies so that anyone who is just starting out won't be misled by what I say here.....
Lorna in Southern California
Message was edited by: Lorna from Hawaii

Editing a post with a image freeze

Hi everyone !
I just wanted to share a small bug I stumbled on, I posted there;
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bc62a532-9b9d-42b5-bc89-6ecf30fae68d/soatmp-files-on-local-c-drive?forum=winservergen, but when I used to click to edit my post to edit a typo, my IE just freeze.
I deleted my post and re-posted :) so no worry as we have a work around, but I wanted to give the feedback
Thanks
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

I don't think it would do much good to report this. I haven't heard of it and seems impossible to repro.
Anybody else encounter this issue?
If not, I think we'll close this one and keep our eyes open for it again in the future.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Can't get K8N Neo4 Platinum Edition to post with Dual Core 3800 Processor

I'm doing a sytem build with a K8N neo 4 Platinum board bought second hand off Ebay and can't get the board to post - when I power up all the fans etc come on but there is no beep and the "D" bracket lights stay on solid - 2 amber and 2 red. Having read numerous posts on this forum I've fiddled about with memory in different slots etc and pressed the reset CMOS button but to no avail.
The problem is (apart from the possibility I've been sold a "duff " board !) that I've no idea what version of BIOS is on the board and of course I can't get into the BIOS to see or update it. I understand a BIOS update may be required for the dual core processor - does this mean that if the board doesn't have the correct BIOS it won't recognize the CPU at all which is why I am getting these symptons? Alternatively could the problem lie elsewhere ? I do have another computer with an AMD single core CPU but at this stage don't really fancy taking out this CPU and trying it in the K8N board.
Any advice would be appreciated

-Take the motherboard out of case.
-Unplug all hardwares and power cords, then clear CMOS as the mannual has described.
- Plug one memory, VGA card and power cords, then start the system and check if it could boot.
-If it still couldn't boot, check the CPU support tableand make sure your board support this board. After this, I think you should take another single CPU to the board to check if it could boot. If it could, try flash bios to the latest one so that this board could support this CPU.

Error when posting with Safari 10.3.2

Hi all,
This is odd, I can't post in 10.3 Usage and the Leopard Usage forum and here using Safari 1.3.2 but using Camino I was able to get right in and post here (or at least I'll see when I hit the "Post Message" button. Safari let me in but would keep returning errors when trying to post a topic or reply.
Just thought I'd post here my situation as of right now. Anyone else having problems? Sorry, I lost the copy/paste of the error when I tried to post here with Safari.
littleshoulders
edit: Just now am editing this post with Safari again and it seems to be working again. Weird...I suppose just another small glitch while posting.
Message was edited by: littleshoulders

problem resolved itself. Thanks.

When Using [OLE DB] driver some arabic text appear with cutting last character

hi
i have a problem in crystal report when bilding report using using [OLE DB] driver some arabic text appear with cutting the last one or tow characters
note: i'm using VBasic 6.0 , RDC and crystal report viewer

I thought I'd post an update to this since I've narrowed down the problem.
It turns out this is NOT a bug in Apple's Java implementation, but in the AAT rendering engine. In any application, if a user changes the style of part of an Arabic string, it breaks the font connection. I have been informed though that this has already been fixed, and should be functional when Leopard is released. ALL applications that use AAT suffer from this problem, not just Java.

Varying the line count in every page

Hi All..
I want to vary the line count in a page in my report.
I have mentioned the line size n line count at the starting of the report, n it prints the same no of lines in every page but in the subsequent pages , I want to increase the line count .
How can I do that ?
Thanks.

Hi Naimesh..
thanks for the reply .
well,the code u suggested does not work..NEW-PAGE is jus a standalone command with which the line count cannot be associated.
I actually have some header details that shud only appear on 1st page , n basing on the line count all works fine on 1st page ..but on the 2nd page the header details ned not appear , so only the itab details are getting printed , so the sy-tabix value remains the same but the line count is less than the 1st page leaving some space at the bottom of the page .
And in the subsequent pages the printing takes place but from the begining of the page n also leaving more space at the bottom of the page.
I want that equal no of lines get printed each page , also leaving equal no of lines at the bottom of each page.
Hope I'm sounding clear.
Any answers ?
Thanks.
Sangeet.

I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I get th

Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I achieve that? Thank you.

That should work out, maybe edit it to force updating in the new image.
Could you please post a screenshot with the Layers Panel visible?

Allow the user to control the width of the edit forum post input box

I would like to control the width of of the edit-forum post input box. This could be:
automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
have a user global preference to set the preferred width
at least, allow the user to change the width via the change size icon. The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
Here is an example of an over extended right margin:
Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
Robert

Testing
Standard Reply box can be height adjusted but not width.
Same with Advanced Editor
No Adjustment at all in HTL Editor
Edit.
The Edit uses the Advanced Editor
Only Height Adjustment again.
I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
This may have been a post in the lounge.
It didn't actually try it at the time but have played with it since and have not seen it.
Maybe it is something they "Fixed" in both senses of the word.
Second edit.
I can't alter the box that currently reads "Message Edited by:- ..."
I also can't get this box to accept New lines (they appear in the box but don't post that way)
Corrected Spelling
9:51 PM Wednesday; May 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK)
and new line with a line space as well

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Hi Everyone. I have an old Mac Book. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive?Pls.help.

Hi Everyone. I have an old Mac Book with software updated to 10.6.8. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive? Pls.help. Tks.

Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing!

Editing a post with '#' cuts the rest of the line

Similar Messages

Maybe you are looking for