Editing AE or Premiere CS4 projects in Audition 3?

Is there a way to import an After Effects CS4 or Premiere CS4 project with muitiple audio tracks/layers into Audition 3 and edit/balance each track individually? Have been using Soundbooth to clean up audio from individual video clips, but want to balance & add effects to multiple audio tracks prior to rendering final video. Thought Audition 3 might be a better option than using Premiere's audio mixer?

You can't do it quickly and easily but it is possible by making a rough rendered version (DVavi works well) to work with picture in Audition. Import that into Audition where the video and rough audio will be split to give you a guide track. You can then import all your individual audio tracks saved as .wav files into Audition to work on them and make a final mix to re-import back into Premiere for the final render.

Similar Messages

Editing Premiere cs4 project with premiere elements 9?

Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advance

You are most welcome, though it's probably not the answer that you wanted.
There are just so very many differences between the two programs. As a test recently, I took a PREL from PrE 8, IIRC, and it would not even open in my PrPro 2.0, like my simple PrE 4 Projects would. That PrE 8 test Project was also simple, with no Themes, or Instant Movies - just Cuts and some common Transitions, no Effects. Just too different to Open.
Good luck,
Hunt

Premiere cs4 sequence to audition

hello, is there a way to send a premiere cs4 sequence to audition 3 so it appears in audition just as it does in premiere? i know you can send one clip at a time, or export an entire audio track and then import it into audition, but i want all the clips in their various tracks in the exact same order/time/space as they are in premiere so that i can edit the entire sequence of audio clip by clip in one project and then send it back.
thanks for any help.

No.

Every-time I try to open my Premiere Pro project in Audition it crashes. What is the problem?

Every-time when I want to open my premiere pro project in Audition to work on the audio, Premiere Pro crashes.
What is the problem?
Thank you,
Maruf

You should ask in Audition CS5.5, CS6 & CC and/or http://forums.adobe.com/community/premiere/content
If you ask in the Premiere Pro forum, you need to add a LOT more information (don't give more information here, this is the wrong forum)
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Open a premiere cs4 project with premiere elements 9

Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advance

I'm going to throw out a somewhat educated guess and say no. Despite the similar monikers, Premiere Elements and Premiere Pro are two different programs.

Can't open Premiere CS4 project in CS5

Having issues opening a premiere cs4 project in cs5. The machine I was using with Cs4 has died, so I'm trying to continue the project with CS5.
Whenever I open the project I get a message saying "this project contained a sequence that could not be opened, No sequence preview preset or file or codec could be associated with this sequence type."
I have the latest version of premiere cs5 installed, and quicktime. The footage I was using was from a Canon 7D.
Thank you!
Patrick

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en

Is Ciniform still the way to go for editing HD on Premiere CS4?

Hi all,
I may have a opportunity to edit an inde film shot in on P2 HD 1080p. However, i have a few questions....
0. can Premiere CS4 read and edit MXF files?
1. I'm not sure if my Premiere CS4 system will handle it natively without using an intermediate codec like Ciniform. The files have already been transfered to an external drive which i will then transfer to my systems' video drive. The following is my current system configuration:
. Premiere CS4
. Windows 7 x64
. 12gb of DDR3 ram
. Intel 920 quad core processor
. 1tb (2x500gb) video drive
. 1tb (2x500gb) storage drive.
2. The client is not sure the frame rate the video was shot in, either 24p or 59p. Is there a way to determine the correct frame rate so i can select the proper preset in premiere? I may be able to use VLC to view the codec information.

nados wrote:
Thanks, that's good to know.
Now i just have to figure out how to get paid for editing this indie film. They called asking me to edit it now and get paid later - yea right!
Get paid before you deliver it.

Premiere CS4 Project lost - Windows 7

Hello there,
I have been working on a wedding video for weeks, just when i was about to finish the last few seconds, already done the color correction and such, the next day when i try to turn on the computer again. I first used Photoshop to batch and resize the image i was gonna use for the final slideshow clip for the video, then i used After Effects CS4, done the slideshow and exported the video. So I was gonna go back to the original project i was working on for weeks, to import the slideshow i just have done and finish the whole clip, when I opened the Premiere CS4, I just realized the project is no longer there, along other project I started weeks ago.
I think this is Windows 7's fault, since the project's saved location is at My documents, under Adobe's Premiere's folder, I guess somehow they got deleted or the system just recovered the old setting? No idea. But I am so frustrated that I worked weeks on the video wedding that I am not happy with the footage I shot, and was a pain in the *** to select the clips and got them in the place.. Seems now I have to start all over? Is there anyway to recover that lost project file?

I thught you may had the same problem as me.
It happen to me, that I thought I got lost all my project, because I was able to open it, but I couldn't see anything in my timeline. The timeline was closed, so I went to the menu "window" and reopened "timeline", but no content and no channels were there: no video, no audio and I couldn't open new channels. So I thought I lost everything. I try to drag into the timeline my sequence (default name "sequence 01)", but nothing happen. There must be some shortcut near control+S to save, that do this.
But I found the solution. If I double click on "sequence 01" on the window with all the files contained in the project ("Project window", shortcut Shift+1), everything comes back.
I hope this can help other people looking for solutions.
here the answer I found:
So you lost the Timeline Window? Is it a bug, an oversight, or did they do it to us on purpose??
In Adobe Premiere Pro, the Timeline options disappear from the Window menu if you accidentally close the timeline window. If you lose the timeline window, you have to hunt around for a way to open it. Some of the keyboard shortcuts actually crash Premiere when the timeline window is closed.
I found that the easiest way to open the timeline window is to look in your Project Window for a sequence file. The default sequence is named Sequence 01. Double-click the sequence, and the timeline window magically reappears.

Multi-camera AVCHD editing workflow in Premiere CS4

I have a client project that has me wondering what workflow to use and I someone on this forum probably has the expertise to know the right solution. My requirements...
1. Client is recording a scene using 4 cameras at once, like a live TV show is shot, all AVCHD footage, 1920x1080px 17mbs, square pixels.
2. I must playback in Premiere the 4 video streams in real time and choose one camera to output, like a director would switch a live TV show. So, all 4 streams are playing in Premiere's multiple-camera editing windows. Each show I'm editing is about 1 hour long. The advantage of multi-camera editing of course is I can play all 4 cameras at once and live switch between them in Premiere to arrive at a 1 hour show in 1 hour of editing time.
3. Until I can upgrade my hardware that can possibly handle 4 streams of AVCHD, I'm stuck needing a workflow to convert the original AVCHD to some lowres format, edit those offline low res copies to get my edit decision list, and then reconnect the online HDV AVCHD clips to export through Media Encoder for a final production. My output format is Flash F4V 640x360 px square pixels for Internet playback.
4. Hardware: I'm running Windows 7 RC using CS4 Premiere 4.1, 4gb RAM, 2.4ghz dual-core processor with 64mb Intel turbo boost on a notebook PC. I do have 4 hard drives to hold each camera's footage on its own drive, and a fifth drive to ouput the edited version to, in addition to a drive to hold my OS and Premiere. The external drives are connected via eSATA to the notebook.
Question 1: what do you suggest as the lowres format I should convert my AVCHD footage to for multi-camera playback/editing in Premiere?
Question 2: do you think it's even possible to buy a desktop PC that can handle playback of 4 multicam AVCHD native format files in Premiere in real time? I'm concerned this may be too much for even the most powerful systems, and I would need to resort to editing lowres footage even with the most powerful desktop. As you know, decompressing one or two AVCHD streams is taxing to a PC so 4 at once is a challenge.
Question 3: an alternative workflow would be to feed live video out of the HDMI connectors on the cameras into four HDMI capture cards (Intensity Blackmagic) and capture uncompressed HDV bypassing AVCHD compression altogether, but the disk space required would be substantial. Does this make sense? I've even considered feeding those 4 HDMI feeds into a video switcher between the cameras and PCs but the cheapest solution I can find that can provide genlock (frame sync) between the 4 cameras for clean glitch-free switching is quite expensive, thousands of dollars invested.

I must playback in Premiere the 4 video streams in real time
Good luck with that. Many folks have trouble with even one stream.
edit those offline low res copies to get my edit decision list
I'm not sure offline editing with AVCHD will be possible because of the folder structure. You may not be able to 'replace' the lower res copies with AVCHD.
My output format is Flash F4V 640x360 px square pixels for Internet playback.
Oh, man. Shooting HD of any flavor is just overkill that adds unnecessary work to the process. Have your client shoot in DV.

Can you use more than one computer to edit the same Premiere Elements Project?

I am using Premiere Elements 10. I have built a new project on my desktop computer because the desktop has a firewire port to capture video from my camcorder and my laptop doesn't have a firewire port. The project is stored on my home network. I seem to be able to do editing fine using the desktop computer that the project was created on, but it won't load up right on the laptop for editing. Premiere Elements is configured the same on both computers. I guess my question is - does Premiere Elements store something on on the computer that the project was created on that is not being stored on the network drive? How can I fix the problem so that I can edit on my laptop? The laptop is a top of the line Dell XPS with an i7 processor that I use for other Premiere projects, so the laptops ability is not an issue.
Thanks
Bill

Yes, having files stored on a HDD, but having the letter change between machines is a problem. The Project file (PREL) is only an XML database, with links to the Assets. Those links are Absolute Paths, so if anything changes, from drive letter, to file name, the link is broken.
I have over a dozen externals, that I use to migrate Projects between my main two computers. Each has had its drive letter set in OS of each computer. I started with Z:\ and worked down. Each drive has a lable on it with the designated drive letter. Unfortunately, I ran out of letters, as the workstation has a ton of HDD's and burners, so I had to start over. That does mean that I cannot have both Z:\ drives plugged in at the same time, but that has never been an issue. I wish that Windows would allow for double drive letters, say ZZ:\, but still, I have a handful of letters to use - just too many externals for those letters...
Happy editing,
Hunt

PROBLEM EDITING AUDIO BETWEEN PREMIERE CS4 AND AU OR SB

I have a problem editing my audio files in audition or soundboth, when I return to premiere after have edited the file in AU or SB, I can't see the wave in premiere but I can hear the audio.
I have to rebote premiere to see the wave.
What could be happening?
could you help me, please?
Excuse me for my english, I speak spanish.

What are your exact steps to edit in SB or AU? Do you first Rt-click on the Audio Clip and choose Edit in SoundBooth (or Audition)? Do you Render and Replace (basically what happens with the previous method), and then Open that resulting file in SB, or AU?
From SB, or AU, how do you Save your file - exact steps please?
Good luck,
Hunt

How to open a premiere cs4 project on a premiere cs5?

I have a one hour CS4 premiere project on a PC and I want to transfer it to a mac pro with the new CS5. How can I do it?
Please Help

Yes, I copied the project file and the captured video files and it opens but it doesn't give me the images and doesn't give me the options to find it on the capture drive

Premiere CS4 - Project panel - viewer

Is it possibel to make the little viewer in the upper left corner bigger in the project panel.?

Why post a question if you will not be in until 16 of august.

What's hardware should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?

What's hardware or software should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?
1st question: when i try to do editing by using Premiere CS4 AVCHD sequence timeline, the edting monitor seems not smooth (like wearing goggles) & delay, and when i use AME to encode m2ts file (which not yet edit) to AVI file (about 1 hour), it take 2h 13min to finish, is it normal?
2nd question: i use mpeg2 HD 1440 file to do eding, the edting monitor also not very smooth but better than using m2ts file, after editing done, i try to encode these mpeg2 HD 1440 file (which edited about long 1 hr) to a New file mpeg2 1440 X 1080i HQ or even mpeg2 Pal DV HQ file, the encoding was not runthe encoding after wait for half an hour. How many hours it take usually????
3rd question: i use m2ts file video file to export as a Bitmap, 1 frame 1 picture bitmap, it take long time too, about 1 or 2min to finish encoding, if i export more than 1 picture, it take even more time, i have experienced it, 3 or 4 pictures need about 10 or 15 min to finish encoding. i used to using mpeg2 HD 1440 file (which edited file) to export frame as picture, it not run the encoding at all. WHY ????
i'm new in Premiere CS4,so i got many question about Premiere CS4, usually i use Premiere Pro 1.5 version
my computer is: Intel (R) Core (TM) 2 Duo CPU
                         E7400 @ 2.80 GHz
                         2.80 GHz, 2.00 GB RAM
                         Graphic Card: ATI Radeon X1650 series
                        2 Hard Disks in my computer (C Drive is 300 GB (not sata) , D Drive is 500 GB sata)
4th Question: Premiere CS5 & Premiere CS4 which one is better ???
5th Question: What's different ATI Radeon and NVIDIA Card, which is better, which u suggest to. What is different Graphic Card and Video Card ?? Should i install HD Video Card ????

I don't think a core-2 will work very well with AVCHD... you need at least an Intel i7 920... or whatever is current
My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built... since the GTX 285 is no longer sold, I would now go with a GTX 460 or whatever is the current "best bang for the buck" - AND I would buy 4Gig-by-3Sticks memory to be able to expand from 12Gig to 24Gig if needed
For my home hobbyist, family movies (which means that I am not trying to recreate Star Wars with video effects or many layers) AVCHD editing is "as smooth as spreading warm butter on hot toast" (also the MP4 video from wife's Flip camera)
My 3 hard drives are configured as...
1 - 320G WD Win7 and all programs
2 - 320G WD Win7 swap file and PPro projects
3 - 1T WD all video files... read and write

How do I get Vio Pov.1 (helmetcam) footage to work with Premiere CS4?

Hi.
I'm having the same problems as this guy: http://www.adobeforums.com/webx/.59b78c2b/7 with video from the Vio Pov.1 not playing in premiere. Although his topic is already there I made a new topic to get some fresh hits and try to resolve this once and for all. Also because I make some reference to Canon Ixus video files.
I have run the codec-analyzer g-spot on one of the pov.1 video files and it states that I have the proper codec installed.
Codecs in video clip:
Video: XviD ISO MPEG-4 @ 3101kbps 720*480
Audio: 0x0050 MPEG-1 Layer 2 @ 32000Hz 64 kb/s , Monophonic
Still no luck playing/editing them in Premiere CS4. Audio plays fine, video shows but frame is only updated every 4-5 seconds and not the actual frame that corresponds to that point in the audio but actually the next frame from the first one. It continues like that.
Specs:
Running Vista 32 bit and Adobe Master Collection CS4
Quad-core 2,4GHz
4GB ram (i know, only about 3 to 3,5GB utilized in 32 bit OS.)
Nvidia 8800GT 512mb
74GB WD Raptor as system/adobe software drive.
500GB Samsung spinpoint throuch E-sata as project drive.
The wierd thing is this:
I have a separate system drive with windows xp installed, Adobe Master collection CS3 fully updated and NO other software. (same computer)
Differance between CS3 and CS4:
CS3,no codec pack:
- Canon ixus video files WORK
- Vio Pov.1 reported as audio only, not even thumbs showing FAIL
CS3, ffdshow codec pack installed(ffdshow-rev2180_20081004_xxl)
- Canon ixus: WORKS
- Vio Pov.1: WORKS
CS4 on vista, relatively fresh install, fully updated, no codes packs.
- Canon ixus: FAIL
- Vio Pov.1: FAIL (video)
CS4, same as above with ffdshow installed:
- Canon ixus: FAIL
- Vio Pov.1: FAIL (video)
CS4, same as above with morgan mjpeg codec installed:
- Canon ixus: WORKS (yay!)
- Vio Pov.1: FAIL (obviously as it's not mjpeg)
Someone with some insight into these things, please point me in the right direction. Does anyone have experience with managing video settings within the ffdshow interface? I'm not experienced enough to tweak all the settings.
The current project Im working on is a small web clip shot with a Panasonic HDC-SD100 and the Vio Pov.1. It's a short rally on ice clip I'm looking to produce the panasonic video files are NOT supportet in CS3 even with codec packs.
CS3=
panasonic: no!
vio-pov1: yes!
CS4:
Panasonic: yes!
Vio-pov1: no!
See my problem?
I added the Canon ixus comparison since I previously had problems with it but have now solved them. Also to show that Adobe seem to have cut support for certain formats when moving on to CS4. It has taken me a looong time figuring out how to get ixus working in premiere because I'm not used to this stuff.
The ideal solution is not having to convert clips before using them so I would like to focus on that avenue. After all it finally worked with the ixus clips so I have hopes that eventually a solution can be found for the Pov.1 clips which is also more widely spread and used in proper productions.
Im very sorry for the format of this post, and the length. I just had to get it out there to see if someone can help me.
/ Johannes

Thank you Stanley and Bill for your input.
Sorry for checking the topics progress so late.
Bill, could I ask what specific software you are using for this batch conversion task?
Like I stated in my first post I am able to edit the Pov.1 material when plugging in my secondary HD with Xp and CS3 on it. So I can fiddle about with that as well but if you could supply me with the name of your software it would save me all that time swapping harddrives back and fourth. There are so many out there, would like to eliminate risk of malware and such by using the software you have.
(reminder, cs3 does not do AVCHD, #1 of many reasons why I prefer cs4)
I'm still testing various xvid/mpeg4 settings with ffdshow and other codecs, I'm still determined to find a solution, for everyone. After all, it CAN run under CS3.
I have also submitted the case to Adobe. Hoping to hear from them soon. Anyone else care to throw some thoughts in?
Thanks again for the input so far,
Johannes

Editing AE or Premiere CS4 projects in Audition 3?

Similar Messages

Maybe you are looking for