Editing After Laying Final Audio Mix Into The Time Line - Possible?

Hello Board,
I finished my film recently and layed the final audio mix (stereo track) into the timeline, replacing all the seperate audio tracks. Now, I want to go in and do some edits at the beginning of the movie.
I still have the main video tracks and several other video tracks for noise filter, credits, etc.
Is it possible to link the video track with the stereo audio file and keep everything synced as I make the cuts to eliminate the need to remix the sound?
Any help would be greatly appreciated.
Thanks,
Lin

Because the video and audio aren't linked, I'm using the razor tool to cut in and out point on the timeline, first to the video and then to the audio seperately. after marking the spots with the razor tool, I delete the unwanted area in between (I do both to the video and audio track) and then pull the pieces together on the video and audio tracks. So far it has stayed synced.
In your case, Lin, I'd recommend using Add Edit and Ripple Delete instead of the Blade tool and the other steps you're doing.
That is...
1. At the point where you want to cut, press Control-V (that's Add Edit)
2. At the next point where you want to cut, press Control-V again
3. Select the region to be cutout and press the Del key, that's the key below Help and to the left of End on your keyboard, not the Delete key.
(This is a Ripple Delete, which clears the selection and moves all clips to the left, leaving no gap)
However it seems like doing transitions would be hard because unless I can match the space on the audio track it will all go out of sync.
I'm honestly confused by what you mean about 'space on the audio track' and things not matching - care to clarify?

Similar Messages

After putting still photos into the time line the pop up all over my video when I burn a CD or load to YouTube

After putting still photos into the time line the pop up all over my video when I burn a CD or load to YouTube.
The video in FCPX looks fine, But when I load it the photos will play over top of each other or double play.

Export your project as Quick Time Current Settings by choosing Export Media in the Share menu. See if the movie plays correctly in QT Player. If it does, upload that to Web.
Russ

How do I get my file into the time line in Premiere Pro CC?

How do I get my file into the time line in Premiere Pro CC? I am use to Premier Pro CS6 and unfortunately my labtop took a crash and I lost all of my adobe products. I wanted to check out a trial version and I cannot seem to find one for CS6! Please Help Me! My project is due tonight!!!!!

Hi Aneumann,
Welcome to the Forums.
You have to just right click on the clip imported, in the project panel and select new sequence from clip. You can also go to file menu>new>sequence and create a sequence and then drag the clips after importing them , into the timeline.
Regards,
Vinay

J pegs into the time line

I have been dragging J Peg photos into the time line from a Google search on the internet. Mostly photos of old ships. Could someone tell me why some work and show nice and clear while many others turn quite "fuzzy" when you press play?
Thanks

Most likely it because of the size of the image. FCP scales the image to fill the screen. Small images will be scaled up a great deal and will become soft.
Also make sure you're looking at the rendered output with playback preference set to high quality.

How do I get the full size of my pics or video into the time line?

Greetings,
I've nener been part of a forum before and an wondering if this will actually be taken seriously. I'm new to video editing and know little about the program I am using (Adobe Premiere Pro CC). Would someone please advise me as to how I can add the full size video or pics to the time line. It appears whenever I add something from my Gopro 3 HD camera I only get a partial of the video / pic.
Regards,
The Powered Parachute Guy

Click the NEW ITEM link on reply page #5 in the PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
Also read below...
Some of this is from the Premiere Elements forum, but the idea of sizing pictures is the same for PPro or Encore
Pictures that are "overly" large may cause video editing problems
Photo Scaling for Video http://forums.adobe.com/thread/450798
-HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
-PPro Crash http://forums.adobe.com/thread/879967

Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time

In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD

Sliding video clips along the time line

Quite often as I edit, I like to place clips in the time line forward of my current edit point. For example I might find a shot that works well with a musical swell or beat 30 seconds down the track. With the magnetic time line, I can't slide that shot to the point on the time line without the shot wanting to ping back to the final edit in the time line, or you have to insert place holders or slug. Any ideas for a quick easy way to slid clips?

I had that problem. Solution for me is to take your cursor and not just drag the stuck clips laterally parallel but lift them up slighly in above the time line and move them in any direction. The connecting thin vertical blue line line will still be attached to the TL but some how lifting them up slghtly allows you to drag them anywhere into the TL.
Skyler
San Francisco

Overlays on the clips in the time line

Hello
I am not sure if there is an answer to my questions but maybe there is a trick i have not discovered as yet. I am having some serious issues with the overlays on the clips in the time line. With the overlays I mean the name of the clip, especially on the audio clips. It is so hard to work good with the audio clip in the time line especially when I want to put in a fade in the beginning or need to move the audio level up or down every time the name of the clip is in the way and i can not see the the waveform. I know I just could put the clip in the viewer and do it from there but in my opinion the viewer is very cumbersome to work with as you do not see the whole clip especially if work zoomed in or have a segmented clip. I find it much easier in the timeline except for the overlays there.
I have written to apple but I guess they do not see a need it would be nice to have the ability to turn it off in preferences

thanks
is that new or was that always there. Not to sure if I have tried that in the past
anyway it helped and will makes things much faster
one other question maybe you have an answer to that too. it seems both Audio tracks are independ when putting on keyframes is there a way when using keyframes in the time line that it affect both channels of audio for example a1 an a2
once again thanks for your help

What to do when the client asks for changes after final audio mix?

Sometimes a client will want changes after the final audio mix has been done. That is, I've already sent the project from Premiere Pro to Audition, done a master mix, and sent it back to Premiere Pro. If I'm then asked to make changes to the video, I don't know of any way to preserve the work I've already done in Audition and just update it with changes. I find myself making the changes in Premiere Pro and re-sending the whole project back to Audition for a completely new mix. This isn't very time efficient, and I'm wondering if anyone knows if I can update a project in Audition with changes in Premiere Pro without having to start again?
Obviously it's best to have picture lock before doing the final mix, but things happen and people change their minds.
I'm working in CS6.
Thanks
Carolyn

"The only question I have is whether it is possible to save any of the work
I've done in Audition when I am resending back from Premiere."
A: Absolutely
"When I add more elements to my sequence and unmute the original track and export the
new sequence to Audition, I am basically starting on a fresh mix, right?"
A: Yes
"It's a new sequence?"
No. It's the same sequence. But without the tracks (stems) you previously had in it.
"The only option seems to be to overwrite. My question is whether I can save any of the work I've already done in Audition- there is often a couple of hours of work in already.
A: Before you do anything, save whatever work you've done in Audtion as a session.

Mail starts to play send/receive sounds whenever I plug in a audio cable into the macbook pro

Hi,
I have this strange bug:
I have Mail running and I plug in an audio cable into the audio out jack. Then Mail starts to play send and receive sounds endlessly. Then I have to quit Mail and start it again. Then everything is fine. I think I can live with that, but it's also kind of annoying. Any hints?
Thanks!
Daniel

*there comes (i was mixing up english and german spelling without noticing )

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks, any ideas please?

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks and then sync them, any ideas please?

If you import the audiobook as an audiobook to your iTunes Library, it will be listed in the Books section of your Library. You may need to turn on Books in order to see them. If you cannot see the File/Edit... etc. menu, use CTRL B on your keyboard to make that menu bar appear. Then go to Edit/Preferences>Books and put a tick in the box.
But, if the imported audiobook shows up in the Music section of your iTunes Library, highglight the files (in iTunes) and select File/Get Info/Options/Media Kind>Audiobook. These files will now transfer to the Books section of iTunes.
Once on an iPod Classic, look under the Audiobooks menu. Again, you may need to change the settings in the Settings menus, in order to have the Audiobooks option shown on the Main Menu and/or the Music Menu.

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)

Playing music on iPhone 5, multiple tracks lose audio partway into the song

When playing music on my iPhone 5, multiple tracks lose audio partway into the song, even though the track is still playing.
I have tried re-syncing music to the phone several times. This will fix the problem for some tracks, but then re-create the problem in other tracks. Also, I have switched from syncing the entire library to only syncing a few playlists at a time. What can I do?

Hi Descending!
If your songs are playing correctly in iTunes on your computer, then it sounds like you will want to restore your iPhone using this article:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
If the songs do not play correctly in iTunes on your computer, then you will want to recreate your library by following the steps in this article:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks for using the Apple Support Communities!
Cheers,
Braden

My captured video is all mixed up in the time line after capture

hi after i capture my video it gets all mixed up in the time line nothing is in the right order and it is all cut up. I don't know what happened I have successfully exported a video to idvd before and published it but when i tried to again this happened
if anyone can help thanks

I have the identical issue. Open a project that was fine 12 hours earlier. Now I open the project and all my clips and subclips show up in the browser, but the timeline is empty. Click on sequence 1 - empty. I tried switching my scratch disk from the original external drive to another one that was a mirror copy of the first - changed the scratch disk location. Then had the issue with no sequence data in the timeline. Reverted to original external drive and scratch disk location. Same problem - no sequence data. I can open other previous projects and they're fine. I don't have multiple sequences in my projects - I just build in the timeline, if that has anything to do with the problem. This is very strange. Appreciate any help anyone has.

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Editing After Laying Final Audio Mix Into The Time Line - Possible?

Similar Messages

Maybe you are looking for