Editing already created material
Hi,
How to edit or change already created (using t-code mm01)material.
thanks
hi
go to mm02 tcode there u can edit.
reward me if u got the answer
regards
ram
Similar Messages
-
Editing Already created BEX variable
Hi Gurus,
Is it possible to Edit already created variable(i.e) Changing variable selection from optional to mandatory?
Regards,
Raghavendra.Hi Raghu,
Authorization variable is a mandatory one which has to be included in a report if you want to give authorizations to that report level or data level in the report.
If you don't want just remove the variable.
User exit variable should also be mandatory ones.
So, it's mandatory that it should be mandatory.
With Regards,
Ravi Kanth
Edited by: Ravi kanth on Apr 17, 2009 10:26 AM -
How can you edit a form that you've already created?
I'm not referring to the form fields. I mean if you have a typo for example in the docuyment you created from InDesign and now you need to go back and correct it. How can you do that and maintain all the fields you've already created?
If you're not able to do this, that would be a huge flaw in the workflow.metonda wrote:
Oh my gosh. That is so simple. I'm embarrassed that I even asked the question.
Thanks very much!!
No need to be embarrassed. That gets a lot of people. Most assume (and I did too at one point) that replace pages does that, replaces the page and everything on it. -
Unable to create Material CR , cannot display the page , dump in ST22
Hi Experts,
We are implementing MDG with EHP6 with following components installed with
But I am unable to create Material CR . I am getting the initial page for Create Material but after I hit continue, the next page cannot be displayed .
It is creating an ST22 dump that the config id 'MDG_BS_MAT_PLANT_LIST_ATS' is having an invalid column 'DISPO_TXT' . But I am unable to find the relevant UIBB for this config id . Any thoughts on this issue and how to resolve it. How can I edit the configuration , I don't see that UIBB .
I am unable to find the UIBB for config id 'MDG_BS_MAT_PLANT_LIST_ATS'
I am unable to see the UIBB for MDG_BS_MAT_PLANT_LIST_ATS
I could see the component configuration for MDG_BS_MAT_PLANT_LIST_ATSI found a note 1830324 from SAP regarding this issue , but it is related to SP08 and we are already in SP09.
This note is about the List Component (WD ABAP component FPM_LIST_UIBB_ATS). When the List Component is started it reads the columns from the configuration. All columns in the configuration should be part of the field catalog that is defined by the feeder class (feeder class method get_definition, parameter io_field_catalog). Otherwise the column is invalid (this could happen e. g. when a column that has already been configured is later removed from the field catalog). When such a invalid column is detected the List Component should raise an X-message and in the short text the name of the configuration and the name of the invalid column should be mentioned. The solution then would be to remove that invalid column from the configuration.
Not sure why we are still getting the invalid column issue. -
I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irfhi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM -
Updating price in already created sales order
Hi all,
I have an issue. When we create sales order, system will display current date pricing on sales order, for example total value of sales order is 9000. Now before delivery, prices change and we have to manually update price on sales order individually. Is there any report available that can update price of all already created sales orders instead of going on sales order and update one by one.
Please respond.
Best Regards,
AI.Hello,
You can update the pricing for all the created orders at a time in VA05 .
Goto Transaction code VA05 and give all the sales orders and then in the MENU click on
EDIT->MASS CHANGE>NEW PRICING
And update the New pricing, then will carry out new pricing for all the sales orders at a time.
OR,
There is also one function module SD_BULK_CHANGE , Create your own Query in SQV1 and make changes.
Hope it will resolve , Please revert if you need further details
thanks,
santosh -
How do i move a picture from one pdf-file to another already created pdf-file with adobe reader?
How do I move a picture from one pdf-file to another, already created pdf-file, with adobe reader?
Reader doesn't have editing capabilities.
-
Error While Creating Materialized View
Hello,
I am getting error ORA-22818: subquery expressions not allowed here while creating materialized view. I am using Oracle9i Enterprise Edition Release 9.2.0.1.0. Below pasted is my SQL Script.
Any help is highly appreciable.
Thanks
*********SQL************
select distinct(id),NAME,(select count(GRADE) from employees where
nationality like '%US%'and id=a.organization_id and grade=a.grade
group by ID,GRADE) US,(select count(GRADE) from employees where
nationality not like '%US%' and organization_id=a.organization_id and grade=a.grade
group by ORGANIZATION_ID,GRADE) NON_US,grade from employees a
where grade is not null
group by GRADE,ID,name
order by to_number(grade) descHi,
This is a documented restriction on MVs. You cannot have a scalar express (i.e a select statement) in the select list.
You can get round this by joining your select count(grade).. expression in as an inline view in your FROM clause. Or you can create a normal view without the scalar expression, create your MV as a select from this view, then re-define your view to contain the query you want.
Hope that helps,
Rod West -
Error Message no. MM214 while creating material master
Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regardsHi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P -
Runtime error while creating material master data
hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION... -
Problems in creating Materialized View from 10g R2 to 11g
Hi,
We have two databases in 10g Release 2. These databases are on two different servers and we use
Materialized views to replicate data between these servers. We are currently using 64 bit version of
oracle 10g release 2 for LINUX.
Oracle Database 10g Release 10.2.0.1.0 - 64 bit Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
We use CENTOS 5 - 64 bit edition
We upgraded one of the databases to 11g (We exported the data from old database and
imported it in new database) . Then we tried to create a Materialized view with incremental refresh
on it where the base table is in the second Oracle 10g database.
The problem is that it is not letting us create the view with FAST Refresh. It kept on giving ORA-12028
error. We tried different remedies suggested on forums like creating a view with ROWID, but still it
continued giving us the same error. We also synchronized the characterset of Oracle 10g and Oracle 11g
installations but still it did not work.
Our base table size is pretty large (over 10 Million records) and if we do a full refresh, it takes hours to
refresh it.
Without incremental refresh, we will not be able to fucntion, and to upgrade both database simultaneously
we will need a large down-time which also we can not afford.
Please advise what should we do.
Best Regards
Madhup
Edited by: Madhup on Mar 2, 2009 10:45 AMHello,
Yesterday I met the same problem and very sad about this, however, my story is much more complicated (I think so).
I have 6 databases:
2 - 11g
2 - 10g
2 - 9i
Every database of each release has different characterset(UTF8 and AL16UTF16).
I am trying to create Materialized view with FAST REFRESH on Oracle 11g, when master tables are located on 10g database and 9i database.
Materialized view, which points to 9i database, was successfully created.
Materialized view, which points to 10g database, gets ORA-12028
Like you, I tried many notes from METALINK and thought at the begining that the problem is my characterset. But, when the materialized views were successfully built on Oracle 9i database, I understood that the problem is something else.
Did you find the actual reason why this issue does not work??
Thanks,
Alex -
Create materialized view with specific column sizes
Hi all,
I'm trying to create a materialized view with a specific a column size. Something like
create materialized view test_mv
refresh force on demand
as
select id,
cast(my_compound_field as nvarchar2(50))
from ( select id,
field1 || field2 my_compound_field
from my_table);But Oracle seems to ignore the cast and takes the maximum size it finds for field1 || field2 in the select query. The resulting table has a column nvarchar2(44) instead of nvarchar2(50).
This can give a problem when the view is refreshed... there could be new data that exceeds the current size, i.e. where length(field1 || field2) > 44.
How can I override the column size of a field in a materialized view?
Edit: Some additional info to clarify my case:
field1 and field2 are defined as nvarchar2(25). field1 || field2 can theoretically have a length of 50, but there is currently no data in my table that results in that length, the max is 44. I am afraid that there will be data in the future that exceeds 44, resulting in an error when the MV is refreshed!
Edited by: Pleiadian on Jan 25, 2011 2:06 PMCannot reproduce what you are saying is happening.
SQL> create table t (a nvarchar2(50), b nvarchar2(50));
Table created.
SQL> create materialized view tmv as
2 select a, b, a || b c from t;
Materialized view created.
SQL> desc tmv
Name Null? Type
A NVARCHAR2(50)
B NVARCHAR2(50)
C NVARCHAR2(100)
SQL> drop materialized view tmv;
Materialized view dropped.
SQL> create materialized view tmv as
2 select a, b, substr(a || b, 1, 10) c from t;
Materialized view created.
SQL> desc tmv
Name Null? Type
A NVARCHAR2(50)
B NVARCHAR2(50)
C NVARCHAR2(10)
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
SQL>Edited by: 3360 on Jan 25, 2011 8:10 AM
And with data
SQL> insert into t values ('3123423423143hhshgvcdcvw', 'ydgeew gdfwe dfefde wfjjjjjjj');
1 row created.
SQL> commit;
Commit complete.
SQL> desc tmv
Name Null? Type
A NVARCHAR2(50)
B NVARCHAR2(50)
C NVARCHAR2(10)
SQL> select * from tmv;
A
B C
3123423423143hhshgvcdcvw
ydgeew gdfwe dfefde wfjjjjjjj 3123423423 -
Error when Create Materialized View
Hi
When I tried to create MV show me error :
SQL> @CRIA_MV_ARC_BW.SQL
AND INDUSTRIAL.CD_FABRICA = SUBSTR(ARC.DS_ARC, 1, 3)
ERROR at line 88:
ORA-01031: insufficient privilegesI am using Oracle 9.02 and there are Grant for all Tablles , my query of creation is:
CREATE MATERIALIZED VIEW CLIBGF.MV_ARC_BW
NOCACHE
LOGGING
NOPARALLEL
BUILD IMMEDIATE
REFRESH FORCE
START WITH TO_DATE('26-nov-2009 02:00:00','dd-mon-yyyy hh24:mi:ss')
NEXT trunc(sysdate) + 1/12
ENABLE QUERY REWRITE
AS
SELECT MAX(NVL((SELECT DECODE(A.T$CDNG$O,'F',DECODE(TRIM(B.T$CALC$O),'S','C',A.T$CDNG$O),A.T$CDNG$O)
FROM TRITON.TTDFAT995501 A, TRITON.TTDFAT996501 B
WHERE A.T$OCOM$O + 0 = ARC.CD_UNIDADE_EXPEDIDORA
AND A.T$NDOC$O = NOTAS.CD_NOTA
AND (A.T$OCOM$O = B.T$OCOM$O AND A.T$NREF$O = B.T$NREF$O)
AND ROWNUM =1),
0)) NEGOCIO,
ARC.CD_CLIENTE CD_CLIENTE,
CLIENTE.T$NAMA DS_CLIENTE,
ARC.CD_ARC,
ARC.CD_STATUS,
ARC.CD_STATUS || ' - ' || STATUS.DS_STATUS STATUS,
TO_CHAR(ARC.DT_EMISSAO, 'DD/MM/YYYY') DT_EMISSAO,
TO_CHAR(ACAO_INV.DT_REALIZADO, 'DD/MM/YYYY') DT_REALIZADO_INVESTIGACAO,
ARC.CD_MARCA || ' - ' || MARCA.T$DSMA$O MARCA,
ARC.CD_PRODUTO CD_PRODUTO,
EMBALAGEM.T$CDAC$O || ' - ' || EMBALAGEM.T$DESC$O DS_EMBALAGEM,
SUBSTR(ARC.DS_ARC, 1, 3) CD_COMPANHIA_PRODUTORA,
ARC.CD_MOTIVO_RECLAMACAO CD_MOTIVO_RECLAMACAO,
MOTIVO.DS_ITEM DS_MOTIVO_RECLAMACAO,
DECODE(ARC.FL_PROCEDENCIA, 0, 'PROCEDENTE', 1, 'IMPROCEDENTE', ' ') PROCEDENCIA,
SUM(NVL((SELECT SUM(NVL(T$IQUA$O, 0))
FROM TRITON.TTDFAT995501 A, TRITON.TTDFAT996501 B
WHERE A.T$OCOM$O + 0 = ARC.CD_UNIDADE_EXPEDIDORA
AND A.T$NDOC$O = NOTAS.CD_NOTA
AND (A.T$OCOM$O = B.T$OCOM$O AND A.T$NREF$O = B.T$NREF$O)),
0)) NR_QUANTIDADE_VENDIDA,
ARC.NR_QUANTIDADE_AFETADA NR_QUANTIDADE_AFETADA,
ARC.NR_QUANTIDADE_AFETADA_REAL NR_QUANTIDADE_AFETADA_REAL,
DS_JUSTIFICATIVA DSJUST
FROM ARCTB_ARC ARC,
ARCTB_NOTAS NOTAS,
ARCTB_TABELA_MOTIVO MOTIVO,
ARCTB_ACAO_IMEDIATA ACAO_INV,
ARCTB_ACAO_IMEDIATA ACAO_IME,
ARCTB_STATUS STATUS,
TRITON.TTCCOM010501 CLIENTE,
TRITON.TTCCOM936501 CIDADE,
TRITON.TTIITM001810 D,
TRITON.TTIITM983501 PRODUTO,
TRITON.TTFGLD010806 CC,
TRITON.TTCCOM983501 MARCA,
TRITON.TTCCOM000501 CIA,
TRITON.TTIITM982501 NAT,
SEI.SIBTB_MULTIMARCA MULTIMARCA,
SEI.SIBTB_DIRETORIA_DEPTO DIRETORIA,
TRITON.TTCCOM994501 USUARIO,
ARCTB_GERENCIA_INDUSTRIAL INDUSTRIAL,
TRITON.TTIITM984501 EMBALAGEM
WHERE ARC.CD_ARC = NOTAS.CD_ARC(+)
AND ARC.CD_ARC = ACAO_INV.CD_ARC(+)
AND ACAO_INV.CD_TIPO_ACAO(+) = 0
AND ACAO_INV.CD_ACAO_IMEDIATA(+) = 999
AND ARC.CD_ARC = ACAO_IME.CD_ARC(+)
AND ACAO_IME.CD_TIPO_ACAO(+) = 1
AND ACAO_IME.CD_ACAO_IMEDIATA(+) = 999
AND ARC.CD_CLIENTE = CLIENTE.T$CUNO(+)
AND CLIENTE.T$ESTA$L = CIDADE.T$ESTA$L(+)
AND CLIENTE.T$CDMU$L = CIDADE.T$MUNI$L(+)
AND TRIM(REPLACE(ARC.CD_PRODUTO, '-', '')) =
TRIM(REPLACE(D.T$ITEM(+), '-', ''))
AND TRIM(REPLACE(ARC.CD_PRODUTO, '-', '')) =
TRIM(REPLACE(PRODUTO.T$ITEM$O(+), '-', ''))
AND PRODUTO.T$PROC$O = NAT.T$PROC$O(+)
AND EMBALAGEM.T$CDAC$O(+) = PRODUTO.T$CDAC$O
AND ARC.CD_MOTIVO_RECLAMACAO = MOTIVO.CD_ITEM(+)
AND ARC.CD_MARCA = MARCA.T$CDMA$O(+)
AND SUBSTR(ARC.DS_ARC, 1, 3) = CIA.T$NCMP(+)
AND ARC.CD_STATUS = STATUS.CD_STATUS(+)
AND TRIM(ARC.CD_CENTRO_CUSTO) = TRIM(CC.T$DIMX(+))
AND CC.T$DTYP(+) = 2
AND CC.T$SUBL(+) = 0
AND ARC.CD_DEPTO_MULTIMARCA = MULTIMARCA.CD_MULTIMARCA(+)
AND ARC.CD_DEPTO = DIRETORIA.CD_DEPTO(+)
AND ARC.CD_USUARIO = TRIM(USUARIO.T$CDUS$O(+))
AND ARC.CD_STATUS IS NOT NULL
AND ARC.CD_MOTIVO_RECLAMACAO = MOTIVO.CD_ITEM(+)
AND INDUSTRIAL.CD_FABRICA = SUBSTR(ARC.DS_ARC, 1, 3)
GROUP BY TO_CHAR(ARC.DT_EMISSAO, 'YYYY'),
TO_CHAR(ARC.DT_EMISSAO, 'MM'),
ARC.CD_ARC,
ARC.DS_ARC,
ARC.DS_SUPERVISOR,
ARC.CD_STATUS,
STATUS.DS_STATUS,
TO_CHAR(ARC.DT_EMISSAO, 'DD/MM/YYYY'),
TO_CHAR(ACAO_INV.DT_ORIGINAL, 'DD/MM/YYYY'),
TO_CHAR(ACAO_INV.DT_REALIZADO, 'DD/MM/YYYY'),
TO_CHAR(ACAO_IME.DT_ORIGINAL, 'DD/MM/YYYY'),
TO_CHAR(ACAO_IME.DT_REALIZADO, 'DD/MM/YYYY'),
TO_CHAR(ARC.DT_PROCEDENCIA, 'DD/MM/YYYY'),
TO_CHAR(ARC.DT_RECEBIMENTO, 'DD/MM/YYYY'),
TO_CHAR(NVL(ARC.DT_APROVACAO_INDUSTRIAL,
ARC.DT_APROVACAO_COMERCIAL),
'DD/MM/YYYY'),
ARC.CD_CLIENTE,
CLIENTE.T$NAMA,
CIDADE.T$DSCA$L,
ARC.CD_MARCA,
MARCA.T$DSMA$O,
ARC.CD_PRODUTO,
D.T$SEAK,
EMBALAGEM.T$CDAC$O || ' - ' || EMBALAGEM.T$DESC$O,
NAT.T$DESC$O,
ARC.NR_LOTE,
ARC.DT_FABRICACAO,
SUBSTR(ARC.DS_ARC, 1, 3),
CIA.T$CITY,
ARC.CD_MOTIVO_RECLAMACAO,
MOTIVO.DS_ITEM,
DECODE(ARC.FL_PROCEDENCIA,
0,
'PROCEDENTE',
1,
'IMPROCEDENTE',
ARC.DS_DISPOSICAO,
ARC.CD_CENTRO_CUSTO,
CC.T$DESC,
ARC.NR_QUANTIDADE_AFETADA,
DS_JUSTIFICATIVA,
DS_DISPOSICAO,
CD_RESPONSAVEL_CAUSA,
ARC.NR_QUANTIDADE_AFETADA_REAL,
ARC.DT_ATENDIMENTO,
MOTIVO.CLASSIFICACAO,
ARC.DS_COORDENADOR,
ARC.FL_ATENDIMENTO,
TO_CHAR(ARC.DT_ATENDIMENTO, 'DD/MM/YYYY'),
ARC.DS_COORDENADOR_INVESTIGACAO,
INDUSTRIAL.REGIAO
ORDER BY ARC.CD_ARC DESC;
Edited by: muttleychess on Nov 25, 2009 10:25 AMPlease see my privilege
GRANTEE PRIVILEGE ADM
CLIBGF CREATE TABLE NO
CLIBGF CREATE ANY VIEW NO
CLIBGF CREATE SNAPSHOT NO
CLIBGF SELECT ANY TABLE NO
CLIBGF CREATE ANY TRIGGER NO
CLIBGF CREATE ANY SNAPSHOT NO -
Create material master get error message
Hello Guys,
I get the error message as below when i create material master . can you help me?
error message
nternal error in FORM/FUNCTION ckms_buffer_write in position 19 with RC 0
Message no. C+099
Procedure
Please inform your system administrator.
Thanks and best regards,
AlengaoDebug the program with help of ABAPer and check it.
Also pls check these NOTES,
414204, 933809, 390655,0001096890
0001126497
0001164684
0001230454
Edited by: Afshad Irani on Aug 12, 2010 3:12 PM -
MM01 in IS-Retail to create material master for Construction materials
Dear All,
We have few materials which will be used only in PS-For construction of our buildings. We are not selling these materials, seldom we will use for STO ( Both Inter & Intra).
Can i create these materials using MM01 instaed of MM41 ?
Is listing compulsory for these materials also ?
Regds,
CB
Edited by: Channabasappa.K on Jul 7, 2011 7:38 AMHI ,
Yes you can create material through MM01...........Create seprate material type for PS material & use is exculusively for PS only....................You can do STO for SAME material...
Regards
Maybe you are looking for
-
Adding Image to Header - Pages 5.0
Hi, I need to add an image to the header in Pages 5.0 (newly updated!) and can't seem to do it!!!! How do I do this, is it even possible? I have tried to Copy Paste, no use. Any help is appreciated, the new version of Pages is quite frankly, annoying
-
Overdrive & Light Rays in 5.1.4 - not supported in HD
Was finishing a TV special in HD and these lovely new effects were used liberally. Problem was, my Kona couldn't render them in HD! Anyone else run into this problem? It was solved by exporting the needed media at DVCPRO HD 720 24p, then re-importing
-
Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help if you've the knowledge. Many Thanks
-
HTTP Submit and email Submit in same form
Please help. I have a form that has a "http submit" to a secure payment site (visa, mc, etc) and a "email submit button" within the same form. The process is that the individual would fill out the form, then make the payment, then submit the filled
-
Labview 8.5 and dotNet 2.0 : Unable to load assemblies ...
Hi, We are trying to upgrade a labview application written with 8.0/8.2 version to Labview 8.5. Our application creates dotNet 2.0 objects and call dotNet methods. Our program works fine in Labview 8.0/8.2 but with Labview 8.5 the Vi's are "Brocken