Editing an iView - Help

Hi All
I am having a little difficulty getting iViews to look and feel exactally how I want them to. For example the 'News Authoring' iView I want to be able to change the links at the top. However I can't seem to do this - what I want to know is:
1. Is there a visual editor to change iViews, and if yes what is it?
2. Am I going about this the wrong way? Is there a better way of creating and administering iViews?
Thanks in Advance
Phil

Hi Wade,
Evn though we easily achieved this through Tansaction Ivw,companies r concerned abt the Look and feel.
U can create BSP Ivws if u r familiar with BSP Programming.This Ivws go in Sync with EP .
Wht Iview u want to Change ? Is it anything ESS / MSS ?
U can use Netweaver Dev studio.
If u need more info ,revert back to me .
Regards,
J

Similar Messages

What are the Java iView 'Help' possibilities?

Hi all,
Currently we are investigating what the possibilities are of the 'Help' option for iViews.
If I understand correctly, you can have only one help link included in the context menu.
However, according to common UI preconceptions, it would make more sense to have a separate Help icon, instead of having it as a menu item under the Options icon (ie. help is available right away, plus you immediatly see whether help is available or not)
Regarding this I have two questions:
Would it be possible to have a Help icon next to the Options icon in the iView tray?
And if so, would it then be possible to have multiple links in a help dropdown if a user clicks that help icon?
Any input is greatly appreciated!
Thanks in advance,
Robin van het Hof

Not sure if it helps, but we are using the standard iView help link now that SAP have kindly re-instated the functionality in the next round of EP support packs (see OSS note 875858). This method allows you to specify a URL to whatever help files you like in each iView.
I agree with Michael that the standard iView help is a little hard for users to find when it's buried in the options menu. To get around that issue we have created our own iView tray icon image in the universal yellow question mark style, and loaded it up with the portal theme editor. I would show you what I meant if we could include images in SDN posts
Regards,
John

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

My location bar, tool bar (file, edit, tools, bookmarks, help) disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.

My location bar, tool bar (file, edit, tools, bookmarks, help) all disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.
The problem started when I turned on the computer this morning. I tried to install Mozilla 4 from your website and that installed but I still have nothing on the top.

It may be due to Firebug. Seeing as how you're a web developer, it's very possible you have this installed. The latest version, 1.7X a10, appears to cause everything you described. I downgraded to "a8" and that seems to have fixed everything.
I also recreated a profile from scratch before trying this out, so I can't guarantee it's definitely Firebug.
Similar issue: https://support.mozilla.com/en-US/questions/783078
edit: If you go to the Firebug forums, you'll see this is now a known problem. http://code.google.com/p/fbug/issues/detail?id=4012 for the issue tracker.

I have Adobe Acrobat Pro 9, moved it to a new computer, reregistered, and now am unable to use any of the edit capabilities. Help?

I have Adobe Acrobat Pro 9, moved it to a new computer, reregistered, and am still unable to use any of the edit capabilities. Help?

We always like to know what solutions work. The other options that would cause problems include:
1. the file is either secured or a PDF/A
2. you need to update Acrobat (Help>Updates)

I downloaded LR for MAC when my free trial ended. But - I get a "renew your membership to reactivate the develop module" when I try to edit images. Help!

file:///.file/id=7873307.718I downloaded LR for MAC when my free trial ended. But - I get a "renew your membership to reactivate the develop module" when I try to edit images. Help!

If you purchased the Perpetual Licensed version of Lightroom and received a 24 numeric serial number you will have to download the correct version from the link below.
Before doing the new installation you will have to uninstall the existing version from your computer (it is the Creative Cloud version) since it is requesting you to "renew your membership" . This process will not interfere with your Catalog file, Preferences or your personal files, it will just remove the existing application. Both versions are the same application just a different download and activation process.
Reboot your system then run the install of the Perpetual License download and input the serial number to activate. Things should be fine.
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7

Elements 13 works really slow in editing.Can someone help. I have OSX Yosemite 10

elements 13 works really slow in editing.Can someone help. I have OSX Yosemite 10

First of all, did you have PSE installed before updating to 10.10? If so, you need to do this:
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog
Also, be sure you have updated to 10.10.1. And if you have a large number of recently imported images in the organizer, PSE will be slow till organizer is through creating thumbnails for the photos.

I can't see the menu bar in PSE 9 Organizer. Where File Edit View Window Help should be

I can't see the menu bar in PSE 9 Organizer. Where File Edit View Window Help should be

Check your Windows Display Preferences, and make sure you're using the default, 100%, smaller screen fonts.
Ken

The "File Edit View Window Help" menu disappears after opening Adobe Acrobat X Standard

After installing Adobe Acrobat X Standard, when I run the program the "File Edit View Window Help" menu is visible for only a brief second then disappears. I tried to press F11 or other functions keys to bring it back. I also installed Adobe Acrobat X Pro which I also have a license for and it would do the exact same thing. Reinstalling the programs did not seem to resolve the problem. Is there an issue inside the registry?

Thank you for your comment. However, F9 does not seem to work.
When I press F9, the menu bar appears but the words "File Edit View Window Help" are still missing.
When I press F9 again the menu bar will close.
This is a screen capture before the words "File Edit View Window Help" disappear. After only about a second they are gone.

E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER after I switched from authorized by computer to authorized by ID on the same book, how can I open open that same book? I downloaded the book again, reinstalled the digital edition but no help? If anybody can answe

E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER after I switched from authorized by computer to authorized by ID on the same book, how can I open open that same book? I downloaded the book again, reinstalled the digital edition but no help? If anybody can answer that would be a great help.

Hi Shreya,
That answer seems to work in purchased books but in my case I dont know who is the ebook provider in lebrary. I asked library people and they did not give me any contact to reset the activation. I will try again to find out that contact. I was wondering if there is any way at our side so we can fix this. Probably there is nothing. Thanks anyway.

Editing ess iviews

Experts,
I recently learned about admin edits for peronalising IVIEWS in ep 7.0 . can any one. please provide some help ful links

Hi ,
Post the question clearly!
If I am not wrong , you want to edit / cutomize ess iviews.
you can do it using homepage framework method.
NWDI is the best solution for customizing ESS.
Home Page Framework
ESS : Webdypro iView Customizing
NWDI
Clarifications regarding customization of ESS iViews
ESS Customization
How to do the modification in standard ESS/MSS business packges using NWDI?
Koti Reddy

Page / iView Help Option

Hello,
I have a couple of questions regarding the Help option at Page Title and iView Tray level.
First, this option is available in the properties of PageToolBar but when I set it on, it still does not appear in the options menu.
Second, I have set the option on in a url iview and it appears in the options menu of the iView tray but when I click it I get directed to a page saying 'Sorry no help'. Where do I maintain the content of this linked help page?
Thanks
Tahir

To set the URL at the iView level, do the following:
Open the iView, click on 'Edit property Attributes' (its the link right at the top above the Property Category Dropdown)
In the new window, select "URL to help topic" and change the end user personalization to "Read/Write" -- Click Apply/Save.
Back in the iView Content editor, in the Property category, select "Show All".
Scroll down to the field, "URL to Help Topic", where you can enter the URL
You should hide the help url after setting it--otherwise the end user can change.
Hope this helps,
Marty

New to HD Editing and CS, building a PC to suit requirements of HD edit. Experienced help wanted :-)

Firstly let me say hi and thanks in advance to all that read and assist with my questions
A Bit about me..
I have recently acquired the need for video editing at a much higher level with both having a family now (baby daughter) and a very active hobby (rc heli flying at a sponsored level). With this in mind I bought a HD video camera some time back without the realisation that, to effectively edit such footage requires horsepower!!.... so i have saved up for a new computer and ended up here after much reading on various forums (toms hardware, video guys etc etc).
Where I am up too....
I have started by firstly implementing a NAS into my Home network which is primarily used to store and stream media (Gigabit LAN) around the home. It is setup in RAID 5 with 5 x 2TB disks (so about 7TB of storage). I have done this so there is some backup of photos, movies, home video etc (if I lose a disk , hopefully i will not lose the lot). I have also acquired adobe Premiere Pro CS 5 and now need a workstation that will allow me to edit in confort ( the one I have will not even run it!! .
My aim is to store original files and completed work on the NAS (or burn to Bluray etc).
I am looking at a PC solution, as I can obviously get more horsepower for less $$ than a laptop solution.
I have built PC's in the past but not with high frequency and this will be the biggest budget one I will have attempted. I have been researching alot over the last few weeks about sytems and components and found this forum to be very good in dealing with hardware specs and requiremnts in a very proffesional way.
I am now at the point where I getting a little muddled with which way to go and still have a lot of research to complete. My approach is to tackle each of the components needed one at a time in a fairly hierarchial manner.
What the PC will be used for..
This PC will be used primarily for the video editing and some gaming (when I have time). AlLso any other horsepower intensive apps if needed (I have a laptop and other comps for general duties).
Budget
My budget is fairly rigid at $2500 AUD (so I am not looking at a Zeon solution LOL). The budget is to include:
Case                              ?
CPU                            Intel I7 2600K (based on my research this seems to be the best way to go with my budget and needs)
CPU Cooler                  Standard Intel supplied Cooler (seems to perform reasonably well even when moderately overclocking (~4.0 - 5.0 khz)
MOBO                           ?
RAM                              ?
Graphics Card                 ?
BLURAY Writer               ?
PSU                               ?
HDD Storage               1 SSD and 3 HDD's with 2 in Raid "0"
OS                              Windows 7 64 Bit
23 inch Screen               ?
Questions
     Motherboard
I guess my issues with MOBO slection revolve firstly around which chipset to go with Z68 (newer) or the P67? It seems the Z68 is feature rich, however I also seem to feel that the Quick sync and SRT would be better disabled with what I am setting the machine up for? So therefore what advantage is there with going with Z68 if any? or am I better off getting a more established P67 chipset based board?
I also see that some boards have the Nvidia NF200 for expanding bandwidth on the restrictive 16 PCIe lanes available on the 1155 socket boards given I am only looking at one decent Graphics card is this a chip I should avoid (as I have read this can cause latency with only one graphics card)?
Another thing I have noticed is some boards have a PLX PEX8608 chip which seems to manage the limited PCIe lanes better if other cards are plugged in?
I also see some boards have the Marvell Sata 3 controller on them that does not seem to perform as well as the native Intel Sata 3 controller on the Southbridge in tests. I guess I have no real idea of when I would be looking at stretching the bandwidth and wonder whether I need to concern myself with 4 x sata 3 connections (2 intel and 2 Marvell)?
One last question I see there is now MOBO's available with PCIe 3.0 available (even though there are no devices that can utilize it) is this even worth being a consideration or is it not really of any importance to the slection process?
In summary it appears there is lots of goodies on offer with different chipsets and boards, however I do not want to waste budget on things I have no use for or gimmicks.
     CPU Cooler
It is my intent to start with the factory supplied Intel bundled cooler and invest the money not spent on this item on better graphics card etc. For moderate Overclocking it seems to perform ok.... am hoping this will be ok?
    HDD Storage
At this stage I am not up to speed with the exact storage devices I need, I am initially looking at whether my ideas for a storage system have merit? Please bear in mind I am not a CSpro user as of yet and so some of this is just based on research with no base knowledge....?
1 x ~120Gb SSD                                    for OS and Programs
1 x ??Gb/TB HDD 7200 rpm                    for Media Projects
2 x ?? Gb/TB HDD 7200 rpm in raid "0"    for Media Cache and Preview Files
Will the onboard Raid controller accommadate the above adequately?
    Graphics Card
I am looking at Nvidia as far as I can tell so that I may make use of the CUDA threads and as far as type I assume I pick the best one of the approved list (adobe approved list)? I am still confused ast to whether there is any benefit from a using a twin GPU card, its unclear to me whether the CUDA can tap into both of the GPU's on such a card? Of course budget restraint will come into play here.
     Ram
I am looking at 4 x 4gb dual channel Ram cards to give a total of 16Gb total (DDR 3) as for brands, types and frequencies I have no idea yet and need to cover off some of the above first before my research gets too wide?
     PSU and Case
I am hoping for a modular device for this, however I was thinking this and the case are a low priority at this stage (until some of the other solutions are verified).
     Blur Ray writer /reader
With me using my NAS for media streaming I will not be burngin to many Blu ray disks, however I will be reading a few so that I can upload them onto the NAS via this unit. I have no idea what is a good or bad unit or what to look for in this area?
     Monitor
I have found some cheap solutions in the 23" sizing for a main screen (~160 AUD) supported by my existing 17' monitor, however is there anything I should be looking for in particular with the monitor I choose?
I will update each section with what is decided on so that it may help others who are having the same tough decisions to make?
Even if we just tackle the Motherboard first I would be greatfull...
Thanks for reading and again all assistance is appreciated.
Regards
Jody

Ok well after much reading I have got the following as the setup that shoe horns in at $2500 ish...
Interested in thoughts for Premiere pro:
Component Model $ each Stat Ice Store
Case
UNKNOWN AT THIS STAGE BUDGET $200
Power Supply
FSP Aurum Series 750W Modular Power Supply $139.00 PCCASEGEAR
Motherboard
ASUS P8P67 Deluxe REV 3 $212.00 I-Store
Processor
Intel I7 2600k Gen 2 $324.00 All needs Computer
CPU Cooling
Thermalright Silver Arrow CPU Cooler $89.00 PCCASEGEAR
Memory
G.Skill Ripjaws X F3-12800CL8D-8GBXM (2x4GB) DDR3 $79.00 $158.00 PCCASEGEAR
OS/Programs Drive
Patriot 120G Wildfire SSD SATA3 $289.00 Umart
Capture/work Drive
2 x Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
Render to Drive
2 x Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
Dual/Quad Head Video
Gigabyte GeForce GTX 580 Super Overclock $589.00 PCCASEGEAR
DVD-RW
LG BH12LS38 Optical Media (OEM) $68.71 Mega Buy
Operating System
Windows 7 64 Bit Pro $129.00 Umart
Monitor
Samsung S23A300B 23in Widescreen LED Monitor $149.00 Netplus $2,362.71
Total
This will be supported by a 10tb 5 disc NAS on Gigabit connection for long term secure storage.

Cannot edit webpages, any help out there

I have contribute CS4, I can login to the site that I am
working on, but when I try to edit a page I get the error message
that I "can not download page to your desktop". Because of that I
can not use contribute, it is rendered useless at this point.
Any help to resolve this issuse would be appreciated.
Any help would be greatly appreciated. I should add that
during the session when I was logged on to the site, I was able to
edit one page, after publishing that page I wanted to edit another
page, and that is when I got the error above. There are no locked
regions on any of the pages in the site so that can not be a
problem.
Larry

Hi Charles,
Thank you for your response. I never thought to give that a
try, but after your suggestion I did try, and yes I can create a
new page from Contribute, publish that new page to the site. But,
again, when I try to edit that newly created page in Contribute, I
get the same error, " Could not copy the page to your computer'.
Now I would also like to add that there are two other individuals
that are on separate computers, in different buildings even, that
get the same error message. I guess you could call it an error
message only because we can't edit any pages.
And, we are not logged on at the same time, we are not trying
to edit at the same time, and this is not specific to any one page,
the all create the problem, we can't edit any pages with
contribute.
Again, Thank you for your response, but I am still open to
any and all help with this problem.
Larry

New at building editing machine need help

So I've been reading the forum and through some research I've seen a good option for a mobo is X58 ASUS P6X58D-E LGA - but I've been reading the plethora of problems and I know me and I am definitely not a tech savvy guy when it comes to making these machines - I was wondering what a good alternative would be as it seems to have nice features like USB 3.0
I am located in toronto canada so I am trying to get parts from www.canadacomputers.com which is literally just a 10 minute walk away from me - although some of the parts they don't have so here is my build
Windows 7 professional
Sentey Arvina Full Tower Case $129
ASUS ENGTX470/2DI/1280MD5/V2 GeForce GTX 470 $259
G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 $196
ASUS P6X58D-E LGA but after reading this http://vip.asus.com/forum/view.aspx?id=20100429194317906&board_id=1&model=P6X58D+Premium&p age=1&SLanguage=en-us it's kind of made me nervous even with manufacturer tested ones people are still having this issue where 12gigs shows up as 6...so I don't want to wast cash on consistently trouble shooting
Western Digital Caviar Black (WD1001FALS) 1000GB (1TB) SATAII 7200RPM 32MB Cache (OEM) $80
core i7 950
trying to make this low budget i think it came around 1600 something I already bought the LG dvd/writer drive
any help would be greatful

That small adjusment that you mention is to increase the ram multi for the
folow result:
RAM multi 10= 1333 mhz
RAM multi 12= 1596 mhz
In both cases we must increase the QPI Link Speed. Its like making OC of the
ram which can be a little complex for a normal user.
About the Latency I cannot say more. Only hope that BillG publishes my
results soon and try with facts more that with words.
Note: all these info is base on a I7 950.
B.R. Harms
2010/11/29 richardrock <[email protected]>
I don’t believe RAM latency is anywhere near as important as your processor
choice. You have devised a good configuration. Its not imperative to over
clock; Premiere CS5 will work great with your configuration! I will
reemphasize, “Know (make sure) people are using your mother board/ RAM
combination successfully” just as an indicator you aren’t climbing out onto
a limb that has never been tried. More RAM is more important than faster
Ram, but with 12GB you will be editing like a madman.
>

Editing an iView - Help

Similar Messages

Maybe you are looking for