Editing and formatting text

This question was posted in response to the following article: http://help.adobe.com/en_US/premiereelements/using/WS4A0C1660-201D-41bf-9D4B-353D8BFE36F6. html

Sam,
Even today, fonts take resources to manage, and the resource issues normally show up first at the OS level, but then can manifest themselves at the program level, and especially with resource intensive programs, like PrE.
I have about 10K fonts on my laptop, but seldom have more than about 350 installed into the OS at any one time. On my workstation, I have 19K + fonts, but again, only about 350 installed at any one time.
I use Extensis Suitcase to manage my fonts, and have created many Font Sets (often by style, but also by client, or even Project), and can install/uninstall those on the fly, as required.
One rec. for a free font manager (only know about it on the PC, so maybe not available for Mac?), and that is Font Frenzy. Many use it, and every review that I have read have all been positive. Might be worth a look.
Now, in my case, and with a PC, I have, of course, the Windows Font folder (for installed fonts), and then have a C:\Fonts folder, with several sub-folders, like PS Fonts, TT Fonts, OTFonts, etc.. I have all of my other fonts in those, and have Extensis pointed to those. When I need, say my fonts for Keyline Design Studio, I just load my Keyline Font Set, and then have access to all of the fonts that they use. When done, I just uninstall the Keyline Font Set, and I am back to my ~ 350 installed fonts.
Also, I make regular backups of all of my fonts, as most are commercial, so I have plenty of $ invested in them. I just make a DVD-Data of my C:\Fonts folder w/ all of the sub-folders, plus my Windows Fonts folder. That way, should I have an issue, should I go to a new OS, or need to restore my fonts, I just Copy over from my DVD-Data.
Good luck,
Hunt

Similar Messages

  • How can I show only text edits and not text formatting when using print comments summary?

    Acrobat 9.3.0 for Mac.
    Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
    I only want to show text edits, not text formatting changes. So questions are:
    1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
    2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

    Hi,
    You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
    Following idea could be your task flow
    Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
    |
    v
    Router
    1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
    2. if pageFlowScope outcome > 0 then MyPage
    hope it helps,
    Zeeshan

  • Regarding email notifications, I want to receive "Submitted Data" and Formatted Text... Is this possible?

    It seems as though I cannot receive formatted text, which is crucial to my form submissions making sense.

    Thank you so much, Ram!  I REALLY APPRECIATE YOUR HELP!
    I am wondering if it possible to manually create a node in RSA6 for the InfoSet.  I tried it by doing the following:
    I went to RSA6 and clicked on the white icon for "Create Node".  I then entered the number "8", followed  by the name of the InfoSet.  (I entered an "8", because all our DataSources seem to start with an "8".  I'm not sure why.) 
    The DataSource now shows up, but when I double-click on it, nothing happens.  When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
    Also, do you know where I can get my hands on the white paper? 
    Thanks again!
    Regards,
    Sarah-Jane

  • Tabs and formatting text

    Hi, a couple of things. I know this is just a Beta version but:
    When I paste text into the controls it ignores all tabbing.
    When I try to align justify both left and right sides of the text it doesn't work.
    I can't import text where some of the text is bold, italic, or
    underlined. 
    I can't import text where some of the text is in different fonts.
    I am trying to make an interactive book. So I need to be able to have properly formatted text.
    Perhaps there should be an option for the controls to contain Rich Text Format or HTML text. 
    I would say the main things would be the tabbing, if I was pasting several paragraphs of text into a text Label or text Gallery. Second would be able to have bold or italic text inside a paragraph. I
    think that would be really nice! I would think that a Sienna should have
    more functionality than a webpage not less!
     I suppose there are ways round it such as doing a copy and paste of my text and changing tabs into several spaces but I shouldn't really need to do that. 
    \^_^/

    Thanks. At the moment I've decided to just use Visual Studio Express to make my eBook using a WebView control to display my chapters.
    I think for me I still like the ability of Visual Studio to do advanced scripting.
    But I think Sienna is good for prototyping and it did inspire me to make an eBook in the first place.
    You could put a WebView component and it could display webpages with Flash content then people could make their apps in Flash! haha. It's all gone circular. :s
    \^_^/

  • SQL Server 2008 R2 Express Edition and Full Text Indexing

    Hello, we have recently upgraded our web front end server from SQL Server 2005 (Standard Edition) to SQL Server 2008 R2 Express Edition (in conjuction with upgrading our main production servers to SQL 2008 R2 Standard). We have 12 Databases on our production
    SQL Server that are replicated to our web frontend server to the SQL Express instance. One of these databases has a FULL TEXT INDEX. The production database is running the Adobe iFilter version 9 64Bit. The FULL TEXT CATALOG has been created and populated
    and performs searches as intended. However, upon replication, when using the search option on our web page based on that PDF iFilter, it no longer works. After examining the properties of the FULL TEXT CATALOG, we note that the Catalog size on the subscriber
    end is 0MB in size (whereas it is 3MB on the Publication side). Also the Unique Key Count on the subscriber side is '1' whereas on the publisher side it is 30,000+. After examining the FT Indexing logs on the subscriber side shows an error: "Warning: No appropriate
    filter was found during full-text index population" On the subscriber side which is running Windows Server 2003 and SQL Server 2008 R2 Express Edition, Adobe Reader 10.1.1 is installed (all 32Bit) with the Adobe iFilter AcroRdIF.dll. When running the SELECT
    * from sys.fulltext_document_types T-Sql statement, the list returned shows the PDF filter to be installed and shows the correct path. Under the System Environment Variables, that path has also been installed (from previous recommendations in researching this
    problem). After numerous reboots, service restarts and re-attempts to get the FT Daemon to crawl - no success. Can anyone please help with this problem? Is there something I am missing? In an attempt to work around this problem thinking there might be a version
    conflict between the 64Bit version on the publisher and the 32Bit version on the subscriber, I disabled the replication of the FULL TEXT CATALOG and tried to create a new catalog on the subscriber with the same results. Thank you for your answers in advance
    - Fustrated! Sorry, somehow this got posted originally under Server Design

    Hello Jeff hope your still out there.  I wrote this question 2 years ago and upgraded to SQL Express with advanced services.  Full Text replication worked until last week.  We are operating in a virtual environment.  My publisher box
    is a Windows Server 2008 R2 (64bit) with SQL Server Standard Edition.  My Web front subscriber is a Windows 2003 R2 (32bit) Server with SQL Server 2008 R2 Express SP1 with Advanced Services. Now the exact same thing is happening after 2+ years. 
    We are looking for possible updates that might have broken this but I am stretching that.  Any clues please?  32bit vs. 64bit?

  • How do I edit and delete text

    i am struggling to editnd delete text how am I able to do this

    Hi zainab g,
    You can't edit/ delete text in a pdf from Adobe Reader.
    You can accomplish this via Acrobat.
    How to edit PDF files:
    Open a file in Acrobat XI.
    Select Tools > Content Editing.
    Click the Edit Text & Images tool.
    Click the on-page element you wish to edit, which automatically activates the tools you'll need.
    Choose the tool that best fits your task.
    Please check: http://wwwimages.adobe.com/content/dam/Adobe/en/products/acrobat/pdfs/adobe-acrobat-xi-edi t-text-and-images-in-a-pdf-file-tutorial-ie.pdf
    Regards,
    Rave

  • How do I edit and add text to a file on my android

    Oil need to fill a form that was sent to me . I also want to be able to make a pdf first

    Hi timsdream:
    I don't think this is a Firefox question. I don't think you can edit PDFs in Android from a browser if that is what you are asking or are you asking about text editing on Android?
    Anyhow if it is a Firefox question please let us know the usual troubleshooting stuff:
    * what version of Firefox
    * what version of Android
    * what you did, what you expected, what happened
    * any other details that might help!
    ...Roland

  • Can I insert a new text at the cursor's position In Formatted-Text-Edit?

    Hi Everyone,
        I am doing a task to enhance Formatted-Text-Edit,
        The task's goal is: simultaneously edit/display text and image.
        I decide to use Formatted-Text-Edit and Formatted-Text-View to realize the task.
        In Formatted-Text-Edit, user can edit the text and input URL for image,
        In Formatted-Text-View, the text and image can be displayed simultaneously.
        I add a button "Insert Image" besides the Formatted-Text-Edit,
       This is the key point:
       When user click the button, I want to insert a new text(URL of the image) at the cursor's position in Formatted-Text-Edit,
       But how can I get the cursor's position, and insert a new text at the cursor's position in FTE.
       Can anyone give me some suggestion or solution?
       Many thanks in advance.
    Best Regards,
    Derek

    I don't believe that you can get the cursor position yet with the FormattedTextEdit UI element. The best you could do currently is to place the insert at the end of the current text.
    Note duplicate thread/question to;
    Set cursor on the table column inherited with text edit UI element
    Please don't double post your questions in the forum.

  • Missing Format Text, Insert, and Edit Source, etc Options on Some Pages

    I’m having trouble understanding why certain pages have more edit options than others. I’m new to Sharepoint Workspace 2010 and I’ve been reading/ researching for answers for 2 days now. I tried to HyperSnap in some pictures however it will not allow me
    to until my account is verified and it's not sending a verification email, sorry!
    Issue: 
    On some pages, I have the edit pencil with lots of great edit options such as Format Text, Insert and Edit Source. (This is good!)
    On some pages I have no edit pencil, but when I go to Page
    à Edit Page à I get few edit options, not including Format Text, Insert or Edit Source. (This is not good)
    After reading other somewhat similar posts, I noticed that on the pages where I get lots of edit options, they show SitePages in the URL. Where I get few edit options, SitePages is not in the URL.
    Is there a fix so that I can have the expanded edit options in all of my pages? Thank you for your help!

    Hi,
    In SharePoint we don’t have edit page options [ribbon toolbar page edit formatting options] for all types of page for application page we cannot edit application page like site pages
    again the missing edit button might be due to many causes:  
    Can you verify that it's not a permissions issue? Try navigating to the page in edit mode by appending to the url: your-site/Pages/YourPage.aspx?ControlMode=Edit&DisplayMode=Design
    Or you can try this
    your-site/Pages/YourPage.aspx? ?ToolPaneView=2
    1. You can check  that on some pages the ribbon is hidden by default. You need to make it visible by clicking on "Show Ribbon" on the "Site Actions" drop-down menu.
    2. You haven't been doing Visual Upgrade (which actually replaces your master page with the v4.master)
    3. If you have different master page and may be your master page is not 100% compatibile with SP2010, nor does it use the elements from v4.master (collaboration) or the example nightandday.master
    To add the button in your page you could use the <SharePoint:PageStateActionButton id="PageStateActionButton" runat="server" Visible="false" /> (if you've seen already that would generate the button on the left side of
    the ribbon)!
    Please can you ping the URL of the page and how you crated that page to further assist, we would be happy to help.
    Krishana Kumar http://www.mosstechnet-kk.com

  • I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

    I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

    Try opening Disk Utility in your Applications-Utilities folder and repair permissions.

  • Iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted?  Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

    iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted?  Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

    Hi Ken,
    Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
    It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
    My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
    Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
    Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
    Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
    All of these options do not seem too great to me.
    I am open to any ideas.
    Thanks,
    Rob

  • Editing and printing formated text

    I need to create an editor that could format text like RTF or postscript and then print the result with jdk 1.3.
    This has to work on Window/Linux/Mac
    It seems that RTF doesn't work well in Java and I found nothing for postscript
    Does anyone have the answer?

    Oh, in that case I don't know.
    There is some stuff in javax.swing.text.rtf but I don't know how complete it is.

  • ALV report editable to enter text and print with including the text?

    Hi all,
    I have to display output of a  report in ALV format and i have to make two fileds can be editable to enter texts by user  and able to print the list with that texts .
    Is it possible using standard Function modules or I have to go for OO methods? Please give the sample code ?
    Thanks,
    Vamshi
    Edited by: VAMSHI KRISHNA on Oct 31, 2008 4:25 PM

    Hi Vamshi,
    Check out the Below sample code for the editable ALV.
    *& Report  Z7CC_OOPS_ALV_EDITABLE
    report  z7cc_oops_alv_editable.
    tables sflight.
    data: begin of gt_outtab occurs 0.     "with header line
            include structure sflight.
    data: celltab type lvc_t_styl.
    data: end of gt_outtab.
    data: gt_fieldcat type lvc_t_fcat.
    data: g_carrid like sflight-carrid,
          g_connid like sflight-connid.
    data: gs_spfli type spfli.                                  "#EC NEEDED
    data: g_custom_container type ref to cl_gui_custom_container.
    data:  g_container type scrfname value 'BCALV_GRID_DEMO_0100_CONT1'.
    data: g_grid  type ref to cl_gui_alv_grid.
    data: wa_outtab like gt_outtab.
    *       CLASS lcl_event_receiver DEFINITION
    class lcl_event_receiver definition.
      public section.
        types: begin of sflight_key.
        types:   carrid type s_carr_id.
        types:   connid type s_conn_id.
        types:   fldate type s_date.
        types: end of sflight_key.
        types: sflight_keys type standard table of sflight_key,
               sflight_table type standard table of sflight.
        methods:
          handle_data_changed
             for event data_changed of cl_gui_alv_grid
                 importing er_data_changed.
        methods:
          get_inserted_rows
               exporting
                  inserted_rows type sflight_keys.
        methods:
          get_deleted_rows
              exporting
                  deleted_rows type sflight_table.
        methods:
           refresh_delta_tables.
        methods: set_table_is_initial.
        methods: set_table_is_not_initial.
        methods: table_is_initial
                    returning value(initial) type char01.
      private section.
    * §4.Define internal tables to remember inserted and deleted lines,
    *    thus the delta between input made after the last saving.
        data: inserted_rows type sflight_keys,
              deleted_rows type standard table of sflight.
    * This flag is set if any error occured in one of the
    * following methods:
        data: error_in_data type c.
    * This flag signals that no records were read for the flight
    * table initially:
        data: initial_table type c.
    ** Methods to modularize event handler method HANDLE_DATA_CHANGED:
        methods:
          check_double_entries
             importing
                pr_data_changed type ref to cl_alv_changed_data_protocol.
        methods:
          update_delta_tables
             importing
                pr_data_changed type ref to cl_alv_changed_data_protocol.
        methods:
          perform_semantic_checks
             importing
                pr_data_changed type ref to cl_alv_changed_data_protocol.
        methods:
          get_cell_values
               importing
                 row_id          type int4
                 pr_data_changed type ref to cl_alv_changed_data_protocol
               exporting
                 key             type sflight_key.
    endclass.                    "lcl_event_receiver DEFINITION
    class lcl_event_receiver implementation.
      method handle_data_changed.
    *    data: ls_good type lvc_s_modi,
    *          l_price type s_price,
    *          ls_new type lvc_s_moce.
    *    error_in_data = space.
    ** check if there exist double entries
    *    call method check_double_entries( er_data_changed ).
    ** remember new or deleted lines for saving
    *    call method update_delta_tables( er_data_changed ).
    ** check mt_good_cells semantically
    *    call method perform_semantic_checks( er_data_changed ).
    *    if error_in_data = 'X'.
    *      call method er_data_changed->display_protocol.
    *    endif.
      endmethod.                    "handle_data_changed
      method check_double_entries.
        data: lt_good_cells type lvc_t_modi,
              ls_good type lvc_s_modi,
              ls_key type sflight_key,
              ls_sflight type sflight,
              l_flightdate like gt_outtab-fldate,
              l_del_row type lvc_s_moce,
              ls_outtab like line of gt_outtab,
              l_reentered type c.
    * §5.Check if there exist already other records with equal key fields.
    * Check if the user has entered two new lines where the key fields
    * are equal.
    * Since CARRID and CONNID are read only, the check is restrained
    * to field FLDATE.
    * Algorithm: Copy all entries in MT_GOOD_CELLS to a dummy table.
    *            During the copying procedure check if there exists
    *            already a line with the same Flight date.
    *    loop at pr_data_changed->mt_good_cells into ls_good.
    *      case ls_good-fieldname.
    *        when 'FLDATE'.
    *          call method pr_data_changed->get_cell_value
    *                      exporting
    *                            i_row_id = ls_good-row_id
    *                            i_fieldname = ls_good-fieldname
    *                      importing e_value = l_flightdate.
    *          read table lt_good_cells with key
    *                            value = l_flightdate
    *                            transporting no fields.
    *          if sy-subrc = 0.
    ** There exists already a line with the same flight date!
    *            call method pr_data_changed->add_protocol_entry
    *                         exporting
    *              i_msgid = '0K' i_msgno = '000'  i_msgty = 'E'
    *              i_msgv1 = text-m01
    *              i_fieldname = ls_good-fieldname
    *              i_row_id = ls_good-row_id.
    *            error_in_data = 'X'.
    *          else.
    *            ls_good-value = l_flightdate.
    *            append ls_good to lt_good_cells.
    *          endif.
    *      endcase.
    *    endloop.
    ** Check if any new entries already exist in gt_outtab.
    ** At this point, lt_good_cells contains only lines with
    ** FIELDNAME = 'FLDATE'.
    *    loop at lt_good_cells into ls_good.
    *      l_flightdate = ls_good-value.      "flightdate, see above
    *      read table gt_outtab with key
    *                    carrid = g_carrid
    *                    connid = g_connid
    *                    fldate = l_flightdate
    *                    transporting no fields.
    *      if sy-subrc = 0.
    ** Check if this entry was deleted before, i.e. it is in the table
    ** of deleted rows. If so, the entry does not exist twice. The user
    ** has deleted a line and then reentered it.
    *        l_reentered = space.
    *        loop at pr_data_changed->mt_deleted_rows into l_del_row.
    *          read table gt_outtab into ls_outtab index l_del_row-row_id.
    *          if sy-subrc ne 0.
    *            message i000(0k) with text-e01."Fehler beim Löschen
    *          elseif
    *                    ls_outtab-carrid eq g_carrid
    *                and ls_outtab-connid eq g_connid
    *                and ls_outtab-fldate eq ls_good-value.
    *            l_reentered = 'X'.
    *          endif.
    *        endloop.
    *        if l_reentered ne 'X'.
    *          call method pr_data_changed->add_protocol_entry
    *                         exporting
    *              i_msgid = '0K' i_msgno = '000'  i_msgty = 'E'
    *              i_msgv1 = text-m01
    *              i_fieldname = ls_good-fieldname
    *              i_row_id = ls_good-row_id.
    *          error_in_data = 'X'.
    *        endif.
    *      endif.
    *    endloop.
    ** In this demo report you may prevent the selection
    ** of data by setting parameter 'p_ds'.
    ** If this is done, the next check is required:
    *    if me->table_is_initial( ) eq 'X'.
    *      call method get_cell_values
    *           exporting row_id          = 1
    *                     pr_data_changed = pr_data_changed
    *           importing key             = ls_key.
    *      select single * from sflight into ls_sflight
    *                where carrid = ls_key-carrid
    *                  and connid = ls_key-connid
    *                  and fldate = ls_key-fldate.
    *      if sy-subrc = 0.
    *        call method pr_data_changed->add_protocol_entry
    *                       exporting
    *            i_msgid = '0K' i_msgno = '000'  i_msgty = 'E'
    *            i_msgv1 = text-m01
    *            i_fieldname = 'FLDATE'
    *            i_row_id = 1.
    *        error_in_data = 'X'.
    *      endif.
    ** flag initial_table is reset in method 'update_delta_tables'
    *    endif.
      endmethod.                    "check_double_entries
      method update_delta_tables.
    *    data: l_ins_row type lvc_s_moce,
    *          l_del_row type lvc_s_moce,
    *          ls_key type sflight_key,
    *          ls_sflight type sflight,
    *          ls_outtab like line of gt_outtab.
    ** §6.Use protocol attributes MT_DELETED_ROWS and MT_INSERTED_ROWS
    **    to remember which lines where deleted or inserted. Save this
    **    information in your internal tables.
    ** deleted rows
    *    loop at pr_data_changed->mt_deleted_rows into l_del_row.
    *      read table gt_outtab into ls_outtab index l_del_row-row_id.
    *      if sy-subrc ne 0.
    *        message i000(0k) with text-e01."Fehler beim Löschen
    *      else.
    *        move-corresponding ls_outtab to ls_sflight.
    ** It should no be possible that the same line is deleted twice,
    ** so we just add the new key line to 'deleted_rows'.
    *        append ls_sflight to deleted_rows.
    ** If this line was inserted just before it is deleted:
    *        delete me->inserted_rows
    *             where carrid = ls_outtab-carrid
    *             and   connid = ls_outtab-connid
    *             and   fldate = ls_outtab-fldate.
    *      endif.
    *    endloop.
    ** inserted rows
    ** At this point ALV has not added new lines
    ** to gt_outtab, so you can not access their values
    ** by reading gt_outtab.
    ** Table MT_GOOD_CELLS holds new values that can be
    ** referenced using the ROW_ID.
    *    if me->table_is_initial( ) eq 'X'.
    ** No flights were selected initially. This is the first new line.
    *      call method get_cell_values
    *            exporting row_id          = 1
    *                      pr_data_changed = pr_data_changed
    *            importing key             = ls_key.
    *      append ls_key to inserted_rows.
    *      call method me->set_table_is_not_initial.
    *    endif.
    *    loop at pr_data_changed->mt_inserted_rows into l_ins_row.
    *      call method get_cell_values
    *              exporting row_id          = l_ins_row-row_id
    *                        pr_data_changed = pr_data_changed
    *              importing key             = ls_key.
    **      READ TABLE gt_outtab INTO ls_outtab INDEX l_ins_row-row_id.
    ** Just insert the new row regardless if the input is wrong
    *      append ls_key to inserted_rows.
    *    endloop.
      endmethod.                    "update_delta_tables
      method get_cell_values.
    * get values of key cells of row ROW_ID
    ** CARRIER
    *    call method pr_data_changed->get_cell_value
    *          exporting
    *                 i_row_id    = row_id
    *                 i_fieldname = 'CARRID'
    *               importing
    *                 e_value = key-carrid.
    *    if sy-subrc ne 0.
    *      message i000(0k) with text-e02.  "Fehler beim Einfügen
    *    endif.
    ** CONNID
    *    call method pr_data_changed->get_cell_value
    *          exporting
    *                 i_row_id    = row_id
    *                 i_fieldname = 'CONNID'
    *               importing
    *                 e_value = key-connid.
    *    if sy-subrc ne 0.
    *      message i000(0k) with text-e02.  "Fehler beim Einfügen
    *    endif.
    ** FLDATE
    *    call method pr_data_changed->get_cell_value
    *          exporting
    *                 i_row_id    = row_id
    *                 i_fieldname = 'FLDATE'
    *               importing
    *                 e_value = key-fldate.
    *    if sy-subrc ne 0.
    *      message i000(0k) with text-e02.  "Fehler beim Einfügen
    *    endif.
      endmethod.                    "get_cell_values
      method perform_semantic_checks.
    *    data: ls_good type lvc_s_modi,
    *          l_planetype type s_planetye,
    *          l_seatsmax type s_seatsmax.
    *    loop at pr_data_changed->mt_good_cells into ls_good.
    *      case ls_good-fieldname.
    *        when 'PLANETYPE'.
    *          call method pr_data_changed->get_cell_value
    *             exporting
    *               i_row_id = ls_good-row_id
    *               i_fieldname = ls_good-fieldname
    *             importing
    *               e_value = l_planetype.
    *          select single seatsmax from saplane into l_seatsmax
    *                        where planetype = l_planetype.
    *          if sy-subrc ne 0.
    *            call method pr_data_changed->add_protocol_entry
    *                            exporting
    *                 i_msgid = '0K' i_msgno = '000'  i_msgty = 'E'
    *                 i_msgv1 = text-m02
    *                 i_fieldname = ls_good-fieldname
    *                 i_row_id = ls_good-row_id.
    *            error_in_data = 'X'.
    *          else.
    *            call method pr_data_changed->modify_cell
    *              exporting i_row_id    = ls_good-row_id
    *                        i_fieldname = 'SEATSMAX'
    *                        i_value     = l_seatsmax.
    *          endif.
    *      endcase.
    *    endloop.
      endmethod.                    "perform_semantic_checks
      method get_inserted_rows.
    *    inserted_rows = me->inserted_rows.
      endmethod.                    "get_inserted_rows
      method get_deleted_rows.
    *    deleted_rows = me->deleted_rows.
      endmethod.                    "get_deleted_rows
      method refresh_delta_tables.
    *    clear me->inserted_rows[].
    *    clear me->deleted_rows[].
      endmethod.                    "refresh_delta_tables
      method set_table_is_initial.
    *    initial_table = 'X'.
      endmethod.                    "set_table_is_initial
      method set_table_is_not_initial.
    *    initial_table = space.
      endmethod.                    "set_table_is_not_initial
      method table_is_initial.
    *    if initial_table = 'X'.
    *      initial = 'X'.
    *    else.
    *      initial = space.
    *    endif.
      endmethod.                    "table_is_initial
    endclass.                    "lcl_event_receiver IMPLEMENTATION
    data: g_verifier type ref to lcl_event_receiver.
    data: g_max type i value 100.
    data: gs_layout type lvc_s_layo.
    data: ok_code like sy-ucomm,
          save_ok like sy-ucomm.
    parameters: p_ds type c as checkbox.   "delete selection
    select-options s_carrid for sflight-carrid
                                no intervals no-extension default 'LH'.
    select-options s_connid for sflight-connid
                               no intervals no-extension default '0400'.
    start-of-selection.
      g_carrid = s_carrid-low.
      g_connid = s_connid-low.
    * first check airline and connection
      select single * from spfli into gs_spfli
                         where carrid = g_carrid
                         and connid = g_connid.
      call screen 100.
    *&      Module  STATUS_0100  OUTPUT
    *       text
    module status_0100 output.
      set pf-status 'MAIN100'.
      set titlebar 'MAIN100'.
      if g_custom_container is initial.
        perform create_and_init_alv changing gt_outtab[]
                                             gt_fieldcat.
      endif.
    endmodule.                 " STATUS_0100  OUTPUT
    *&      Form  create_and_init_alv
    *       text
    *      <--P_GT_OUTTAB[]  text
    *      <--P_GT_FIELDCAT  text
    form create_and_init_alv changing pt_outtab like gt_outtab[]
                                      pt_fieldcat type lvc_t_fcat.
      data: lt_exclude type ui_functions.
      create object g_custom_container
             exporting container_name = g_container.
      create object g_grid
             exporting i_parent = g_custom_container.
    * Create Objekt to verify input values.
    * (This object is already needed in form SELECT_DATA).
      create object g_verifier.
    *  SET HANDLER g_verifier->handle_data_changed FOR g_grid.
      perform select_data changing pt_outtab[].
      perform build_fieldcat changing pt_fieldcat.
      perform exclude_tb_functions changing lt_exclude.
      gs_layout-stylefname = 'CELLTAB'.
      call method g_grid->set_table_for_first_display
        exporting
          it_toolbar_excluding = lt_exclude
          is_layout            = gs_layout
        changing
          it_fieldcatalog      = pt_fieldcat
          it_outtab            = pt_outtab[].
    * Set editable cells to ready for input initially
      call method g_grid->set_ready_for_input
        exporting
          i_ready_for_input = 1.
    endform.                    " create_and_init_alv
    *&      Form  select_data
    *       text
    *      <--P_GT_OUTTAB  text
    form select_data changing pt_outtab like gt_outtab[].
      data: lt_sflight type table of sflight,
            ls_sflight type sflight,
            ls_outtab like line of gt_outtab,
            l_index type i,
            ls_spfli type spfli,                                "#EC NEEDED
            lt_celltab type lvc_t_styl.
    * Check parameter 'p_ds'=>optionally select no data
      if p_ds is initial.
    * Select data from sflight
        select * from sflight into table lt_sflight up to g_max rows
                         where carrid = g_carrid
                           and connid = g_connid.
      endif.
      if sy-subrc ne 0 or not p_ds is initial.
    * no flights were found!
    * We provide some default values for the first line that is entered:
        ls_outtab-carrid = g_carrid.
        ls_outtab-connid = g_connid.
        case g_carrid.
          when 'LH'.
            ls_outtab-currency = 'DEM'.
          when others.
            ls_outtab-currency = 'US'.
        endcase.
        ls_outtab-seatsocc = 0.
        ls_outtab-paymentsum = 0.
    * set fields FLDATE, PRICE and PLANETYPE to editable
        perform fill_celltab using 'RW'
                             changing lt_celltab.
        insert lines of lt_celltab into table ls_outtab-celltab.
        append ls_outtab to pt_outtab.
    * Tell Verify-Objekt that the table was initial
        call method g_verifier->set_table_is_initial.
      else.
        call method g_verifier->set_table_is_not_initial.
    * move corresponding fields from lt_sflight to gt_outtab
        loop at lt_sflight into ls_sflight.
          move-corresponding ls_sflight to ls_outtab.
          append ls_outtab to pt_outtab.
        endloop.
    * §3.Set all cells of the table non-editable by using the style table.
        loop at pt_outtab into ls_outtab.
          l_index = sy-tabix.
          refresh lt_celltab.
          perform fill_celltab using 'RO'
                            changing lt_celltab.
    * Copy your celltab to the celltab of the current row of gt_outtab.
          insert lines of lt_celltab into table ls_outtab-celltab.
          modify pt_outtab from ls_outtab index l_index.
        endloop.
      endif.
    endform.                               " select_data
    *&      Form  fill_celltab
    *       text
    *      -->VALUE(P_MODE)  text
    *      -->PT_CELLTAB     text
    form fill_celltab using value(p_mode)
                      changing pt_celltab type lvc_t_styl.
      data: ls_celltab type lvc_s_styl,
            l_mode type raw4.
    * This forms sets the style of columns 'PRICE', FLDATE and PLANETYPE
    * editable
      if p_mode eq 'RW'.
        l_mode = cl_gui_alv_grid=>mc_style_enabled.
      else.                                "p_mode eq 'RO'
        l_mode = cl_gui_alv_grid=>mc_style_disabled.
      endif.
      ls_celltab-fieldname = 'FLDATE'.
      ls_celltab-style = l_mode.
      insert ls_celltab into table pt_celltab.
      ls_celltab-fieldname = 'PRICE'.
      ls_celltab-style = l_mode.
      insert ls_celltab into table pt_celltab.
      ls_celltab-fieldname = 'PLANETYPE'.
      ls_celltab-style = l_mode.
      insert ls_celltab into table pt_celltab.
    endform.                               " FILL_CELLTAB
    *&      Form  BUILD_FIELDCAT
    *       text
    *      <--P_GT_FIELDCAT  text
    form build_fieldcat changing pt_fieldcat type lvc_t_fcat.
      data ls_fcat type lvc_s_fcat.
      call function 'LVC_FIELDCATALOG_MERGE'
        exporting
          i_structure_name = 'SFLIGHT'
        changing
          ct_fieldcat      = pt_fieldcat.
      loop at pt_fieldcat into ls_fcat.
        if    ls_fcat-fieldname eq 'PRICE'
           or ls_fcat-fieldname eq 'PLANETYPE'
           or ls_fcat-fieldname eq 'FLDATE'.
    * §1.Set status of columns FLDATA, PRICE and PLANETYPE to editable.
    *    Since all cells are set to non-editable (see step 3) the cells
    *    of this columns will only be editable for new lines.
          ls_fcat-edit = 'X'.
    * Field 'checktable' is set to avoid shortdumps that are caused
    * by inconsistend data in check tables. You may comment this out
    * when the test data of the flight model is consistent in your system.
          ls_fcat-checktable = '!'.        "do not check foreign keys
          modify pt_fieldcat from ls_fcat.
        elseif ls_fcat-fieldname = 'CARRID'
           or ls_fcat-fieldname = 'CONNID'
           or ls_fcat-fieldname = 'CURRENCY'.
    * §2.Use field AUTO_VALUE of the fieldcatalog to preset values when new
    *    lines are added.
          ls_fcat-auto_value = 'X'.
          ls_fcat-checktable = '!'.   "do not check foreign key relations
          modify pt_fieldcat from ls_fcat.
        endif.
      endloop.
    endform.                    "build_fieldcat
    *&      Form  exclude_tb_functions
    *       text
    *      <--P_LT_EXCLUDE  text
    form exclude_tb_functions changing pt_exclude type ui_functions.
      data ls_exclude type ui_func.
      ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
      append ls_exclude to pt_exclude.
      ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
      append ls_exclude to pt_exclude.
      ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
      append ls_exclude to pt_exclude.
    endform.                               " EXCLUDE_TB_FUNCTIONS
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    module user_command_0100 input.
      save_ok = sy-ucomm.
      clear ok_code.
      case save_ok.
        when 'SAVE'.
    *      perform save_data.
        when 'BACK'.
    * §10.Unlock your database table.
    *      perform unlock_sflight.
          leave to screen 0.
        when 'EXIT'.
          perform exit_program.
        when 'ADD'.
          perform add_line_item.
        when others.
    *     do nothing
      endcase.
    endmodule.                 " USER_COMMAND_0100  INPUT
    *       FORM EXIT_PROGRAM                                             *
    form exit_program.
      leave program.
    endform.                    "exit_program
    *&      Form  ADD_LINE_ITEM
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form add_line_item .
    data: lt_rows type lvc_t_row.
    data: wa_rows type lvc_t_row with header line.
    data: tabix type sy-tabix.
    *&Find the  row ( index ) number
    call method g_grid->get_selected_rows
              importing et_index_rows = lt_rows.
    call method cl_gui_cfw=>flush.
    read table lt_rows into wa_rows index 1.
    tabix = wa_rows-index .
    insert gt_outtab  index tabix.
    *REFRESH_TABLE_DISPLAY
    call method g_grid->refresh_table_display
    *  EXPORTING
    *    IS_STABLE      =
    *    I_SOFT_REFRESH =
    *  EXCEPTIONS
    *    FINISHED       = 1
    *    others         = 2
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    endform.                    " ADD_LINE_ITEM
    Thanks,
    Chidanand

  • How to keep all text and formats the same on multiple computers?

    I'm creating a file in InDesign CS6 on my Windows computer. I keep everything on my flash drive. When I go to school, I bring my flash drive with me and open it up on the Mac computer, but then there are are compatibility issues. There seems to be missing fonts and formats but the school uses the same version of InDesign I do. Now I was told a lot of things of how to keep the fonts and formats the same (embed the links, package the files, outline the text, save as IDML). However, it is not clear to me what each of those options do, so I don't know when or why to use them. So I just want to make sure that when I bring in my file in next Monday, I won't have any missing fonts or formats. What would you suggest is the proper things to do to keep everything the same on multiple computers? And could you please explain why?

    If you want cross-paltform comaptibility limit the fonts to OpenType or Windows TrueType formats, both of which work on both Mac and PC. To avoid missing font warnings the fonts must either be installed on each computer, or they must be in a folder named Document Fonts in the same location as the .indd file they are to work with. Packaging the file will build taht folder for you.
    the rest of the stuff in your list won't help you. .idml would allow you to open on an older version, but does nothing for your situation. Embedding the links will keep you from having missing links, but so will packaging, and embedded links will make the file much larger and harder to work with.
    For goodness sake, don't even think about outlining the text. It stops being text when you do that and you can no longer edit it.
    And finally. do yourself a big favor and don't attempt to actually work on your file directly from the flash drive. Copy the whole package folder to the hard drive, work on it, then copy back. You don't want to know how many files are fatally damaged by write errors on flash drives.

  • How to import and make the content of the original PDF document editable and preserves the pdf appearance and retains existing fields and formatting in LiveCycle

    Can someone tell me how I can see my content (artwork and text) after I import  it into LiveCycle Designer ES4?  I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

    Can someone tell me how I can see my content (artwork and text) after I import  it into LiveCycle Designer ES4?  I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

Maybe you are looking for