Editing and printing to the beginning of a txt file

I have to questions that I have not been able to find much on. I have an output file but instead of the new data going on bottom I would like it to go on top. I'm sure there is a method or something but I have not been able to find it. Any help would be appreciated. And I would also like this txt file to be able to be edited throught the web page I'm using so in case something changes I don't have to go in and manual do the changes on the server. Thanks in advance for the help.

alright I figured out how to put the values in at the top but I still would like a way to edit it in a browser. I was thinking of putting the entire text file back into a text area and when the submit button is hit it rewrites the entire file. Anyone done this before or got any better ideas. Thanxs.

Similar Messages

How do I convert an e-mail into a Word file that can be edited and printed?

I received an e-mail from a relative that I want to convert into a Word file that can be edited and printed?

Go to appleid.apple.com to manage the ID, sign in. If you are using two-step verification on the ID, select the Name, ID and Email Addresses section, then change the birth date on the bottom right. If you are using security questions instead of two-step verification, select the Password and Security Question and answer the two security question to access and change the birth date. At the present time you may not be able to enter the correct birth date, but you should be able to change it to 1/1/2001, which will have child ID status.

Blank Form Printing at the beginning of Print job

I'm using Adobe Output Designer 5.5 and have made some changes to an existing form, recompiled the form, and performed a test presentment. The problem is that I have a blank page that prints at the beginning of the print job. How can I get rid of the blank page? The problem did not begin until I made changes to the existing form. Do you have any idea why the blank page is suddenly printing? I didn't change any system settings.

Hi,
I currently have the same problem. I updated an existing template with an JFMain page, and AOD just puts the page in front of the original page. I will post a piece of the log here, maybe you can see what the problem is?
[423]Data:^comment * Preamble overrides...
[423]Data:^field SubscriberName
[289]MDF file `C:\DOCUME~1\APB7D8~1.ARN\LOCALS~1\Temp\MDF123.tmp' opened.
[201]Event group:JFDEFGROUP!OnTOF looking for event macro.
[204]Event group:JFDEFGROUP!OnTOF not found.
[108]Field 'SubscriberName' not found on subform/page 'JFMain'.
[423]Data:Alex Inc.
[201]Event group:JFDEFGROUP!OnTOF looking for event macro.
[204]Event group:JFDEFGROUP!OnTOF not found.
[201]Event SubscriberName!Format looking for event macro.
[201]Event group:SubscriberName!OnEntry looking for event macro.
[204]Event group:SubscriberName!OnEntry not found.
[201]Event group:JFENDDATA!EndData looking for event macro.
[201]Event group:JFDEFGROUP!onExit looking for event macro.
[204]Event group:JFDEFGROUP!onExit not found.
[290]Laying down globals for subform/page '2'.
[208]2 surfaces were printed.
523]Processing PDF input data file: 'C:\DOCUME~1\APB7D8~1.ARN\LOCALS~1\Temp\JFM13A.tmp'.
[521]Progress Report: 'Starting a new form (mdf138).'.
[522]Progress Report: 'Processing Page 1'.
[522]Progress Report: 'Processing Page 2'.
[524]Completed.
I only posted the rows that seem to be different from the regular data and event rows
Thanks!

Friends need help desperate-- Second page not printing from the beginning

Hi Friends,
I have a large layout whose main-section is 8.5x20 (Width&height) which has 2 frames each having 2 repeating frames and about 20 fields in each repeating frame. When I run the report it shows the report right, but when I print, it prints only the first half since the report is long. When I change the property of the second frame of 'Page break before' to 'yes' it prints the second frame on the second page but print it at the same position as it printed on the first, and top of second page is all blank. How do I make to print from the beginning of the second page. Need your help.
Thanks
Joe.

Hello,
Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
Regards

Options gone for select,edit, and print under HP Smart Web banner since HP dialed in to fix crash

The buttons are gone for selecting, editing, and printing under my HP Smart Web since HP dialed in and fixed another problem. I have uninstalled and reinstalled the software but still no luck. All that shows up is the "HP Smart Web Printing" banner with the X to exit; that's it, no options listed below. My computer has completely crashed twice since I started using it 1/4/10. The second time the person dialed in and changed the bios and a few things in msconfig but I don't see anything there that would cause the smart web printing. HELP. Am I missing something really silly since I am a new user of HP Smart Print?
Thank you in advance if you can help!
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^Carrie

I am REALLY annoyed to read this post. I have spent a lot of time to try and fix my computer (which I don't have with 5 kids...not your problem I know and NOT the point). It should NOT be this hard to update and fix a product. I DON'T WANT the Bing bar...and am feeling like I am being forced to accept it to make my puter run correctly because it is supported by HP. What....kind of service is THAT???????? I hope that someone from HP....admin or whatever...reads this. I am "madder" than mad. I have had HP products for years with few problems...and all of which I could find a solution for. This is unacceptable...and I hope someone listens. I don't know if I can trust HP again....when it won't even use the browser most use without problems. Sorry to the rest of the "forum" for venting...but I can't get help...am frustrated...find this out now...and it is nothing personal.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I'd like students to be able to view my comments on printed version of their papers.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I am a teacher, and I would like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.

There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
Jerry

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

My iPod is playing songs half way through and not at the beginning?

Okay, so I will be listening to a song like "Yellow Submarine" by The Beatles and will get the urge to change the song to a different band and song half way through of listening to it. After listening to the new band and song and like a month goes by I will go back to The Beatles song and it will begin where i left off and not in the beginning like it used to. How can i fix this because it makes me mad that it starts half way through and not in the beginning?

Hello uhmcookies,
And welcome to Apple Discussions!
I believe the "Remember playback position" is enabled for these songs in iTunes. This option will ensure that wherever you leave off in a song is always where it will be picked up off at. This is a nice feature for audiobook tracks, but not music.
Anyways, you can disable it by removing the check mark next to this option from under the track's Options tab in iTunes. You can access this tab by right->clicking on the track and choosing "Get Info" from the menu.
Hope this helps.
B-rock

I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. Any solutions?

I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. How can I clear the download or solve this?

If it is a HD movie, it may not be enough. The iPad also need working space.
Try download to iTune (computer) and "Move" to iPad.

I have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

i have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

I do not recommend reformatting your harddrive and reloading your software. This is a Windows thing. On an older mac it may be difficult to find all your software again.
Best to have greater than 2gig of free space. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(3)
Buy an external firewire harddrive.
For a PPC computer, I recommend a firewire drive.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(4)
Buy a flash card.

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do?

Having exact same problem, only it's with a book I've paid for, so it hurts more . Any ideas?

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

Hello there, Elena Lyubina.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an application not functioning as expected:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SQL Server Software ISO, How to find out what is the Edition and Version of the SQL software before starting installation

Hi All-
Before starting installation, I would like to find out What EDITION and VERSION is the SQL Server Software ISO.
Please note this is not to find out what version is the installed sql server but before the installation: Is there a note or abrv. that describes what kind of Edition and version is the ISO?
Detail explanation is appreciated.
Thanks.
belayzeleka

@Balmukund - Thanks for the input - That one is a nice blog!
But assuming you can`t change the Product Key value (you are not provided that number, as you know it gets populated by itself) can you find out
what implies the corresponding edition? If there is a folder where this reference is store, could you provide the full file path where this folder is located?
The ideal solution would be a way to find out what the Edition
is befor we start installation.
Thanks!
Also just to add what I came across:
The SQL Server 2012 installation software comes with pretty much all edition in it, that kind of makes it difficult to easily identify what edition is the specific ISO, but when
one downloads from MSDN one must downloads the
right edition either Standard,
Enterprise, etc so that when you install it, it installs whatever edition is downloaded.
The best source would be whoever downloaded the software.
Also, before going too far, you can find out what edition it is being installed right before the setup wizard finishes on the
License Terms page (Microsoft Software License Terms Page) and if the edition is not the one you intended to install, you can cancel it there and everything will be rolled back- no hastle.
belayzeleka

HT1338 I want to print via my orang livebox through a cannon mp210 printer/scanner. Orange and Apple information suggests this can be done. I have attached the USB cable to the livebox and printer, reset the livebox no result. installed printer cd on imac

How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

Editing and printing to the beginning of a txt file

Similar Messages

Maybe you are looking for