Editing and uploading

I created a page in iWeb and published it on iPage. The upload was messed up and I talked to iPage who told me something about an ampersand and Unix that caused the problem and they were able to do something at their end that corrected the problem in a few minutes (the site is rykline.com) My question is, if I make a change on my iWeb page and upload it again, does the entire page replace the original upload or do only the changes affect it. Obviously, if the whole page is replaced, the same problem will probably reoccur.
Thanks

Try this to find out :
Add a page page (with an ampersand?), publish and view the result.
And yes, everytime you make changes the entire file is published. It's not iWeb specific. All files on your computer or elsewhere are usually replaced in their entirety.
And if they fixed the problem on their side, and not on your side, there's no reason to expect a problem when you publish your pages.
BTW, why hasn't your page a proper filename?

Similar Messages

  • Editing and uploading a downloaded document

    Have an application that allows for both uploads of documents (using a File Browse item and transferring the relevant fields from the HTMLDB_APPLICATIION_FILES view to my customized table) and downloads of documents (using a call via a URL to a customized copy of the Oracle download procedure presented in the sample application). Both the upload and download process work OK.
    The issue I'm running into, is that when a user wants to download a document, the user is presented with the choice of opening or saving the downloaded document. That works OK, but what we'd really like to do is offer the user a chance to edit the downloaded document and then by saving the changes (such as by closing the window in which the downloaded document appears, after making edits), the modified document is "re-uploaded" to the database. What we have to do now is save the download document to the user's PC, then the user has to open the document and modify it, save it, and re-upload it to the database.
    Any ideas on how we can save the users a few steps and upload the document directly after editing? Thanks.

    Well, you can only do that when the content being edited is plain text (mime type text/plain) and less than 32K (hard limit in PL/SQL)
    Looking at how that page (4000:46) is built in f4000.sql, there seem to be some APIs that do some magic
    l_text := wwv_flow_utilities.clob_to_varchar2(
      wwv_flow_utilities.blob_to_clob(p_blob=>l_blob,p_charset=>l_charset));Clearly, all these are undocumented internal-only Oracle APIs that Oracle is not obliged to support.
    Search around on asktom.oracle.com, I am sure you will find code examples that do this sort of thing.
    Hope this helps.

  • AVCHD or MP4 for editing and uploading to YouTube?

    Our company just bought a Canon Vixia HF R52 camcorder so we can shoot instructional videos, edit, then upload to YouTube for our customers to access.  This camcorder has dual recording in AVCHD and MP4.  The guy doing the recording and the guy doing the editing live on opposite sides of the country, so the files will need to be uploaded to a website for sharing. 
    Question 1:  Will the AVCHD files be too large to upload to a file sharing site or is it better to use MP4? 
    Question 2: Which version of Final Cut can handle AVCHD the best, Final Cut Pro 4.0.1 or Final Cut Pro X?
    Thanks!

    4.01 predates AVCHD by a few years. You need FCPX. AVCHD is a better format than MPEG-4. If you're sharing the same media make disk images of the catds and upload those.

  • Dreamweaver site edit and upload not working

    I use dreamweaver to edit various websites on two different hosting sites. Since yesterday, I can't upload files to any of these websites. Dreamweaver is running normally when I edit pages in my local directories, but when I try to edit a site or upoad files, it runs very slowly.
    I am using windows 8 and Dreamweaver 8 which have worked perfectly together until yesterday.
    Any ideas?
    Since originally posting this, I have been able to upload files using a different laptop running Windows 7, so I am presuming that my issue relates to an update in windows 8?
    Message was edited by: Robhuk1

    I use dreamweaver to edit various websites on two different hosting sites. Since yesterday, I can't upload files to any of these websites. Dreamweaver is running normally when I edit pages in my local directories, but when I try to edit a site or upoad files, it runs very slowly.
    I am using windows 8 and Dreamweaver 8 which have worked perfectly together until yesterday.
    Any ideas?
    Since originally posting this, I have been able to upload files using a different laptop running Windows 7, so I am presuming that my issue relates to an update in windows 8?
    Message was edited by: Robhuk1

  • Which is better: XDCAM or ProRes for editing and upload?

    I am trying to determine if I'm better of staying with my native XDCAM files or instead converting them to one of the Pro Res codecs? One of my main issues is that the files that I upload to YouTube never look as good as I feel they ought to, nor as good as other HD files that I've seen online.

    Well, neither would be good to upload. YouTube wants H.264.
    Both look good. ProRes is easier on the system, smoother to edit, but has larger file sizes. XDCAM native isn't bad to work with, it just can take longer to do final rendering...depending on the system you are using to edit.
    Both will convert to H.264 and look good.
    Shane

  • Permission to upload to KM folder, but edit and delete only usrs own file

    Hi guys!
    I need to allow users to upload document to some KM folder, but they must be able only to edit and delete their own file. How to achieve this?
    If someone has write permission to KM folder, he can edit also other documents. I need to disallow this..
    Thanx for answer!
    Peter

    Hi,
    please have a look at this HowTo: https://service.sap.com/~sapidb/011000358700000560192006E/MultipleAuthors.zip
    Kind ragrds
    Karin

  • I just bought lightroom 5. I had lightroom 3. Now when I export my photos from lightroom 5 and upload them into my photoshop elements program to edit the photo files are at 100% zoom percentage. When I upload photos from my old lightroom 3 program they co

    I just bought lightroom 5. I had lightroom 3. Now when I export my photos from lightroom 5 and upload them into my photoshop elements program to edit the photo files are at 100% zoom percentage. When I upload photos from my old lightroom 3 program they come into photoshop at 14% zoom percentage which is what I want them to come in at so I can zoom them in to detail the skin. What might have changed settings wise between the 2 programs, I cannot figure it out.

    I just bought lightroom 5. I had lightroom 3. Now when I export my photos from lightroom 5 and upload them into my photoshop elements program to edit the photo files are at 100% zoom percentage. When I upload photos from my old lightroom 3 program they come into photoshop at 14% zoom percentage which is what I want them to come in at so I can zoom them in to detail the skin. What might have changed settings wise between the 2 programs, I cannot figure it out.

  • Question:  How to edit and/or delete photos uploaded to web gallery?

    My Dad uploaded some photos to my web gallery without renaming the photos. Is there any way I can go in and edit and/or delete these photos? Sorry if it's a dumb question... I'm new to iLife '08 (really new to iLife in general)... and for the life of me can't figure out how to edit and/or delete these photos (without deleting the whole library).
    Thanks for any help!
    Ciao ~ Louie

    Guess I just answered my own question.
    For anybody else that may be wondering...
    From within iPhoto there is a "WEB GALLERY" tab in the left side menu. There you will see the name of your web gallery with a little icon that looks like an antenna. If you click on that icon... it will sync your web gallery photos that have been uploaded by other users into iPhoto. You can then edit and/or delete the photos within iPhoto and the edits will automatically change on the published web gallery (may depend on sync preferences... mine changed automatically).

  • Hello, I recently uploaded about 250 photos from my phone onto iPhoto. However, when I go to view them, they have already been auto-cropped. It seems I must click "Edit," and then "Crop," and then expand the box to the fullest size. Any suggestions?

    Hello, I recently uploaded about 250 photos from my phone onto iPhoto. However, when I go to view them, they have already been auto-cropped. It seems I must click "Edit," and then "Crop," and then expand the box to the fullest size. I don't have enough time to undo this auto-crop with all 250 photos. Any suggestions?

    @SuperMan
    I noticed this as well when navigating through the photo gallery on my iPhone. 
    If you (and he) are asking about iPhone operation then you are in the wrong place - this is the iPhoto for Mac forum - there are forums for the iPhone, iPad and iPod touch as well as iPhoto for IOS -
    I do not see any cropping in iPhoto on the Mac for either camera or iPhone photos (I use PhotoStream with auto import to get my iPhone photos to iPhoto on my Mac) - and given the way iPhoto works it is really not possible to have auto-cropping - the only thing that I see even close to that is that when you select edit ==> drop the default crop is slightly smaller than the photo - but unless you accept that nothing is changed and the photo is exactly as imported
    LN

  • I need to upload edit and change blueprints, what should i get

    What should i get to upload edit and change blueprints

    Sorry, this question is way too generic. "Edit and change" can mean a million things. what are the blueprints based on? What changes do you need to make?
    Mylenium

  • New to HD Editing and CS, building a PC to suit requirements of HD edit. Experienced help wanted :-)

    Firstly let me say hi and thanks in advance to all that read and assist with my questions
    A Bit about me..
    I have recently acquired the need for video editing at a much higher level with both having a family now (baby daughter) and a very active hobby (rc heli flying at a sponsored level).  With this in mind I bought a HD video camera some time back without the realisation that, to effectively edit such footage requires horsepower!!.... so i have saved up for a new computer and ended up here after much reading on various forums (toms hardware, video guys etc etc).
    Where I am up too....
    I have started by firstly implementing a NAS into my Home network which is primarily used to store and stream media (Gigabit LAN) around the home. It is setup in RAID 5 with 5 x 2TB disks (so about 7TB of storage).  I have done this so there is some backup of photos, movies, home video etc (if I lose a disk , hopefully i will not lose the lot).  I have also acquired adobe Premiere Pro CS 5 and now need a workstation that will allow me to edit in confort ( the one I have will not even run it!! .
    My aim is to store original files and completed work on the NAS (or burn to Bluray etc).
    I am looking at a PC solution, as I can obviously get more horsepower for less $$ than a laptop solution. 
    I have built PC's in the past but not with high frequency and this will be the biggest budget one I will have attempted. I have been researching alot over the last few weeks about sytems and components and found this forum to be very good in dealing with hardware specs and requiremnts in a very proffesional way.
    I am now at the point where I getting a little muddled with which way to go and still have a lot of research to complete.  My approach is to tackle each of the components needed one at a time in a fairly hierarchial manner.
    What the PC will be used for..
    This PC will be used primarily for the video editing and some gaming (when I have time).  AlLso any other horsepower intensive apps if needed (I have a laptop and other comps for general duties).
    Budget
    My budget is fairly rigid at $2500 AUD (so I am not looking at a Zeon solution LOL). The budget is to include:
    Case                              ?
    CPU                            Intel I7 2600K (based on my research this seems to be the best way to go with my budget and needs)
    CPU Cooler                  Standard Intel supplied Cooler (seems to perform reasonably well even when moderately overclocking (~4.0 - 5.0 khz) 
    MOBO                           ?
    RAM                              ?
    Graphics Card                 ?
    BLURAY Writer               ?
    PSU                               ?
    HDD Storage               1 SSD and 3 HDD's with 2 in Raid "0"
    OS                              Windows 7 64 Bit
    23 inch Screen               ?
    Questions
         Motherboard
    I guess my issues with MOBO slection revolve firstly around which chipset to go with Z68 (newer) or the P67?  It seems the Z68 is feature rich, however I also seem to feel that the Quick sync and SRT would be better disabled with what I am setting the machine up for? So therefore what advantage is there with going with Z68 if any? or am I better off getting a more established P67 chipset based board?
    I also see that some boards have the Nvidia NF200 for expanding bandwidth on the restrictive 16 PCIe lanes available on the 1155 socket boards given I am only looking at one decent Graphics card is this a chip I should avoid (as I have read this can cause latency with only one graphics card)?
    Another thing I have noticed is some boards have a PLX PEX8608 chip which seems to manage the limited PCIe lanes better if other cards are plugged in?
    I also see some boards have the Marvell Sata 3 controller on them that does not seem to perform as well as the native Intel Sata 3 controller on the Southbridge in tests.  I guess I have no real idea of when I would be looking at stretching the bandwidth and wonder whether I need to concern myself with 4 x sata 3 connections (2 intel and 2 Marvell)?
    One last question I see there is now MOBO's available with PCIe 3.0 available (even though there are no devices that can utilize it) is this even worth being a consideration or is it not really of any importance to the slection process?
    In summary it appears there is lots of goodies on offer with different chipsets and boards, however I do not want to waste budget on things I have no use for or gimmicks.
         CPU Cooler
    It is my intent to start with the factory supplied Intel bundled cooler and invest the money not spent on this item on better graphics card etc. For moderate Overclocking it seems to perform ok.... am hoping this will be ok?
        HDD Storage
    At this stage I am not up to speed with the exact storage devices I need, I am initially looking at whether my ideas for a storage system have merit? Please bear in mind I am not a CSpro user as of yet and so some of this is just based on research with no base knowledge....?
    1 x ~120Gb SSD                                    for OS and Programs
    1 x ??Gb/TB HDD 7200 rpm                    for Media Projects
    2 x ?? Gb/TB HDD 7200 rpm in raid "0"    for Media Cache and Preview Files
    Will the onboard Raid controller accommadate the above adequately?
        Graphics Card
    I am looking at Nvidia as far as I can tell so that I may make use of the CUDA threads and as far as type I assume I pick the best one of the approved list (adobe approved list)?  I am still confused ast to whether there is any benefit from a using a twin GPU card, its unclear to me whether the CUDA can tap into both of the GPU's on such a card? Of course budget restraint will come into play here.
         Ram
    I am looking at 4 x 4gb dual channel Ram cards to give a total of 16Gb total (DDR 3)  as for brands, types and frequencies I have no idea yet and need to cover off some of the above first before my research gets too wide?
         PSU and Case
    I am hoping for a modular device for this, however I was thinking this and the case are a low priority at this stage (until some of the other solutions are verified).
         Blur Ray writer /reader
    With me using my NAS for media streaming I will not be burngin to many Blu ray disks, however I will be reading a few so that I can upload them onto the NAS via this unit.  I have no idea what is a good or bad unit or what to look for in this area?
         Monitor
    I have found some cheap solutions in the 23" sizing for a main screen (~160 AUD) supported by my existing 17' monitor, however is there anything I should be looking for in particular with the monitor I choose?
    I will update each section with what is decided on so that it may help others who are having the same tough decisions to make?
    Even if we just tackle the Motherboard first I would be greatfull...
    Thanks for reading and again all assistance is appreciated.
    Regards
    Jody

    Ok well after much reading I have got the following as the setup that shoe horns in at $2500 ish...
    Interested in thoughts for Premiere pro:
    Component Model $ each Stat Ice Store
    Case
    UNKNOWN AT THIS STAGE BUDGET $200
    Power Supply
    FSP Aurum Series 750W Modular Power Supply $139.00 PCCASEGEAR
    Motherboard
    ASUS P8P67 Deluxe REV 3 $212.00 I-Store
    Processor
    Intel I7 2600k Gen 2 $324.00 All needs Computer
    CPU Cooling
    Thermalright Silver Arrow CPU Cooler $89.00 PCCASEGEAR
    Memory
    G.Skill Ripjaws X F3-12800CL8D-8GBXM (2x4GB) DDR3 $79.00 $158.00 PCCASEGEAR
    OS/Programs Drive
    Patriot 120G Wildfire SSD SATA3  $289.00 Umart
    Capture/work Drive
    2 x  Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
    Render to Drive
    2 x  Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
    Dual/Quad Head Video
    Gigabyte GeForce GTX 580 Super Overclock $589.00 PCCASEGEAR
    DVD-RW
    LG BH12LS38 Optical Media (OEM) $68.71 Mega Buy
    Operating System
    Windows 7 64 Bit Pro $129.00 Umart
    Monitor
    Samsung S23A300B 23in Widescreen LED Monitor $149.00 Netplus  $2,362.71
    Total
    This will be supported by a 10tb 5 disc NAS on Gigabit connection for long term secure storage.

  • I use iBookAuthor to make a textbook for my students; I revised it, including title page, but when I export it and upload it to my iPad, the old title page appears, even though I've deleted the older version of the text before I upload the new one.

    Last year I produced a textbook using iBookAuthor for my students. I exported it as an iBook and they uploaded it to their iPads. This year, I revised it, including revising the title page. However, when I upload the new version, the old title page is shown, not the new one. I deleted the older version of the textbook before I did this. I've been told that I can cut and paste each revised chapter into a new template and that will work; however, title page and glossary can't be cut and pasted. Any thoughts for getting the entire new version on the iPad? I'm also told that if it is uploaded to an iPad that never had a previous version of this textbook, it will upload correctly. But my iPad has had several older versions, now deleted.

    I had a similar issue when trying to create an iBook file to submit for course credit for one of the Apple Learning Essentials classes I took. I had a book I'd started previously which I updated and submitted, and then had to make some edits to for the course evaluator. I made the edits, and when I previewed the book in iBooks Author, it looked correct, but whatever I sent to him only showed some of the edits - for example a new page I created was there, but some edits I made to image captions and the title page image were not.
    What worked for me was to do a "Save as" of the actual Author file to a totally new location (I used the Desktop), and then submit that file - which seemed to work in terms of the changes sticking. I even used the same file name.
    I'm not sure if some similar action might help you (maybe change the file name slightly?) or if you've already tried something like this.
    Still doesn't change the fact that this is a pretty irritating bug.

  • Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
    Thanks
    Jeff Pulera
    Safe Harbor Computeres

  • How to restrict editing documents uploaded in CRMD_ORDER ?

    Hi All,
         In CRMD_ORDER transaction, Transaction Data -> Documents Tab, we can upload our documents,
        Once the document is uploaded and the transaction is saved, I want to restrict editing and deletion of the document.
        I got this BADI CRM_DOC_AUTHORITY, but i am not getting how to use it.
        In this BADI we have a parameter 'Acivity' which has possible values as,
    01     Create Objects
    02     Delete Objects
    03     Read Objects
    04     Change Objects
    05     Get Authorization Information
    06     Change Authorization Information
    If we click on delete, 'the activity is 02 - Delete Objects", I cleared  the '' ios_auth' and displayed  the message 'Documents cannot be deleted'.   It is working fine.
    But when we click on 'Edit' button, the activity is not set to '04' and  it is allowing to edit the document and overwrite the existing one.
    So pls any one help in this. I want to restrict both deletion and editing once the document is uploaded and saved.
    any Suggestions pls ?
    Regard's
    Jean

    Posting the same in ABAP as I didnt got any suggestions here.
    Regard's
    Jean.

  • Download and upload structure

    hi,
    how to download and upload structure from one r/3 to another r/3 system . 
    <b><REMOVED BY MODERATOR></b>
    regards,
    anuj
    Message was edited by:
            Alvaro Tejada Galindo

    Check my weblog...It might help you out -;)
    <a href="/people/alvaro.tejadagalindo/blog/2006/03/14/taking-good-care-of-z-tables good care of Z tables</a>
    Greetings,
    Blag.

Maybe you are looking for