Editing contact's names and tel numbers on the Nok...

I would appreciate if someone could explain to me how I can edit my contacts' names and tel numbers. Have tried without succeeding.
cr.
Solved!
Go to Solution.

-got o to the menu
-then open contacts tap on any contact you want to edit
-tap on the top bar where you fill find the name, you will get a menu--tap on edit or you can click on the avatar display pic
-now you should be able to edit your contacts info
hope this helps
abdoo

Similar Messages

When iCloud syncs it destroys my "custom labels" and puts "main corporate". I've lost names to tel numbers. Help!

When iCloud syncs it destroys my "custom labels" and puts "main corporate". I've lost names to tel numbers. Help!

Alright so OP here. I used Verizon Backup Assistant to get some contacts back (I have a few new ones I haven't gotten yet) and I merged iCloud with them so I have control. I still want to know what caused this though so I know not to do it again, and how to prevent it.

How do you get a list of your contacts nick names and their phone numbers on line and print them out?

How do you get a list of your contacts nick names and their phone numbers on line and print them out? I've been trying to figure out how to get the list to print out but I can't even find a complete list to view on Verizon's web site. Does anyone know how to do this?

Log into your online account. In the, 'I want to', box type, Manage Contacts.
Place your cursor over any contact, a pop screen will appear with the option to print your contacts

HT1296 How can I stop and delete facebook names and phone numbers from my iphone

How can I stop facebook names and phone numbers from being downloaded to my iphone and how can I delete the ones that are already there?

A better way might be
Settings > Facebook > Contacts > turn off.
There are other Facebook settings you might want to leave on. But I also prefer to turn off Calendar there as well to keep every Facebook friends birthday from clogging up my calendar app.

Need Employee Names and Employee Numbers that charge a WBS Element

Hello,
Does anyone know how I can get a list of employee names and employee numbers that are charging a series of WBS elements?
Thanks

Hi,
You could use transaction CATS_DA with Receiver Account Assignment and enter the WBS element.
Good luck!
Tammy

I'm having trouble formatting a book I'm writing using Pages. I need to put my name and book title in the upper left hand corner of EACH page- opposite the page number. How do I do this?

I'm having trouble formatting a book I'm writing using Pages. I need to put my name and book title in the upper left hand corner of EACH page- opposite the page number. How do I do this?

And if this is the new IOS Pages v2 (or the older IOS Pages 1.7.2), you click the wrench icon and then Document Setup. Tap the document header to edit it, and apply the same instructions that I gave previously for OS X Pages v5.
The process for Pages ’09 v4.3 is slightly different. You click the Header, and enter your document title and your name as previously described. You will need Menu > View > Show Ruler. Click once in the ruler at the first or second mark after the 7 inch (roughly 18cm). This will set a tab. Now position the insertion mark behind your title and tab once to the mark you set. Now you can Menu > Insert > Auto Page Numbers ...

How to put the column name and variable value in the alert message.

Dear,
how can i put the column name and variable value in the alert message text. i want to display an alert which tell the user about the empty textboxes. that these textboxes must be filled.
Regards:
Muhammad Nadeem
CHIMERA PVT. LTD.
LAHORE
[email protected]

Hello,
The name of the item that fires the current trigger is stored in the :SYSTEM.TRIGGER_ITEM system variable.
The value contained in this item can be retrived with the Name_In() built-in
value := Name_In( 'SYSTEM.TRIGGER_ITEM') ;
LC$Msg := 'The item ' || :SYSTEM.TRIGGER_ITEM || ' must be entered' ;
Set_Alert_Property('my_alert_box', ALERT_MESSAGE_TEXT, LC$Msg ) ;
Ok := Show_Alert( 'my_alert_box' ) ;
...Francois

When i change my name and profile picture can the ...

When i change my name and profile picture, can the blocked people see my name and my profile?
Help me please

I'm not really sure but I think yes. Blocking a contact will only prevent them from contacting you or sending you contact request. The visibility of your account information depends on how you set it, if you had them visible to public or to your contacts only.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling

Figure numbering AND paragraph numbering in the same document

Hi everyone,
I have a document with both figure numbering and paragraph numbering. So let say I am in section 4, then the first paragraph would be "4.1. Introduction" and the first picture would be "Figure 4.1: Cool pics".
I created two different lists, one for the figure and another one for the text so that figure numbers and paragraph number don't conflict. However I cannot add the section number in the figure numbering since it's on the other list... I tried to have the figure numbering and paragraph numbering in the same list, but then the numbers conflict (e.g it gives 4.1 Introduction and Figure 4.2: Cool pics).
Can anyone help me, doing what I want (which is "4.1. Introduction" and "Figure 4.1: Cool pics")? Any help would be appreciated.
Thanks!
ps: I am using Indesign CS5.5 on a pc

Thanks for your answer Jump_Over, but my project is already divided into chapters (themselves divided in sections) in a book.
I found a way around by having the figure numbering in the same list as the paragraph numbering, the twist : while I use level 1 to 4 in paragraph numbering, I use level 5 for figure numbering with a numbering definition like ^1.^#, so no more conflict between numbers.
It's working fine so far...

When importing photos with iBooks Gallery widget, is anyone aware of a technique for simultaneously importing the photo's description (or jpeg file name) and writing it into the iBook Author caption field for the imported photo?

When importing photos with the iBooks Author Gallery widget, is anyone aware of a technique for simultaneously importing the photo's description (or jpeg file name) and writing it into the iBook Author caption field for the corresponding imported photo? I have 4,800 stills to import and can't imagine it's necessary to copy and paste the description for each.

As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html
As for AS, I'm not sure anyone has sniffed iBA's dictionary yet...google is you friend for hot prospects, I'm sure

Trying to update my apps on the iPhone 3. When I type in user name and password, I get the message "Cannot connect to iTunes Store" How can I connect?

Trying to update my apps on the iPhone 3. When I type in user name and password, I get the message "Cannot connect to iTunes Store" How can I connect?

I have the same problem. Any suggestions?

How to pass tag name and value dynamically in the output of PCo notification?

Hi,
I have a requirement to develop such a scenario where there can be multiple no of tags in PCo (Say 10) but there will be single notification to push the tag name when the value got changed and the changed value to MII. for any value change for any of the tag, the notification will be trigger. So As per my knowledge I have to pass the tag name and value dynamically in the "output" tab of the notification. But need your support to find out how to pass them dynamically.
Thanks in advance.
Regards,
Suman

Hi Suman/Jeedesh,
As per Pco notification, it will trigger whenever any of the tag value changes in Agent instance subscription items.
For above issue, My suggestion
1. Create DB table name TAGLIST with 200 tags as rows in columns (Tagname, TagValue)
2. Based on notification trigger, create a transaction and update values w.r.t TagNames in above table
3. Next time, when notification trigger with fresh value for any of the tag, cross check with existing TagName with Value and update in DB table.
4. And in the mean time, send those Tag details vie mail trigger or as per requirement
Instead of creating 200 notification, above is a just alternate way suggestion to achieve dynamic tag value change notification.
Hope it might solve your problem
Regards,
Praveen Reddy

"Enter your name and password to update the RSS feed"

I keep getting a pop-up from Safari (even when it's in the background) that says:
+*Enter your name and password to update the RSS feed*+
How on earth do I disable this? It is asking for a username and password for Twitter so I must have clicked an RSS feed link there, but after searching like mad, I can't figure out where Safari looks for RSS at on my system.

Same here,
It says:
<<Enter your name and password to update the RSS feed.
To update teh RSS feed "Gmail - Inbox for [email protected]", you need to log in to the area "New mail feed" on mail.google.com. Your password will be sent in clear text.
Name: (blank field)
Password: (blank field)
O Remember this password in my keychain. >>
This started occurring immediately after updating to safari 4.
I tried disabling the automatic RSS updates in safari preferences, set it to "never" as suggested, but the annoying window keeps on popping up.
So the original question is still not answered for me.
It seems to me that all people reporting this problem are OSX Tiger (10.4.11) users

How do I put the file name and path into either the header or the footer?

I need to keep track of pdf documents as their names or locations sometimes change. I need to show both file name and path, preferably in the header. I would also like it to refresh automatically when I change, say, the file name, but that's not as essential as the basic function of showing the file name and path.

You will need to do this with a text field and a Javascript that executes on open.

Editing contact's names and tel numbers on the Nok...

Similar Messages

Maybe you are looking for