Editing Content Posted From My Desktop G5 while I am on a remote laptop.

How Do I Access/Edit my previously posted iWeb pages from a different mac (desktop posted initially and now want to add/edit from my laptop remotely)
Thanks

Find your domain file. All your iWeb work is stored in this single file. By default it should be in your user/library/application support/iWeb folder. Copy this file and move it to your laptop (with the iWeb application installed). The first time you use the copied file on your laptop, double click the domain file icon to start iWeb. After that iWeb will remember to edit that file when you start iWeb. When you go back to using your desktop G5 be sure to copy the domain file from the laptop back to the G5 or you will undo your changes when you publish.
I also use two computers to edit my site. To keep the transition back and forth smooth and painless, I just leave my domain file on my flash drive (which is always with me) and plug the flash drive into whatever computer I'm in front of. This eliminates the time needed to copy back and forth. But I do frequently back the domain file up. If this file is lost, all your work is lost. You cannot edit or download your published site with iWeb.
Sincerely, David Phelps <edited by host - see [url=http://discussions.apple.com/help.jspa#terms]Terms of Use, section 2.6.3[/url]>
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."
ibook & imac Mac OS X (10.4.9)

Similar Messages

How to stop photos opening in preview. I have always edited photos right from my desktop and now they are all opening in preview.

I have always edited photos right from my desktop and now they are all opening in preview. How do I change it back? Thanks!

They open in Preview by default.
However, if you open Picture Folder in Preview, navigate to any photo ( without opening it ) then right click on the photo and select Get Info from the dropdown menu.
About 2/3rds' of the way down on the Get Info tab you'll see a Marker ' Open WIth '. Enter whichever editing program you're using.
Whenever you open a photo from whatever it's location it will open in the chosen editing program.
Hope this helps.

I lost My Data from Plam Desktop application while updating the software Plzz HELP

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

My iCloud icon and content disappeared from my desktop!

PLease help -- it contains 4 years of lesson plans!

I realize now that you referred to an iDisk, what I can't understand is what you did with it, you can't upload files to iCloud except from an Application (usually Apple application). Unless you have installed some 3rd party utility it is not possible to do what you described and I can't tell where your files are.
If you can remember a file name that was included in that store search for it with Spotlight.

I use more than one desktop to edit. Can I access photoshop and lightroom from any of them, or only from the desktop onto which I have download Creative Cloud?

I use more than one desktop to edit. Can I access Creative Cloud Photoshop and Lightroom from any of them to edit, or only from the desktop onto which I have download Creative Cloud?

Divindino you can activate Photoshop and Lightroom on up to two computers. You can find more details at Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

How can I switch my iTunes catalog from my desktop pc to my laptop?

I am retiring my desktop computer that has my iTunes music catalog. This is the pc that I sync my iPhone, iPod, and iPad.How can I delete this from the desktop computer and transfer it all on my laptop or possibly a different desktop? Is it possible to do this without losing what you have in your library, including purchased items and cds you've downloaded? Thank you.

Copy the entire iTunes folder from the old computer to the new one.
You can do this across a network, but it may be better to use an external drive, particularly if you don't already have a backup strategy. Get yourself a portable USB powered drive big enough for your iTunes library, your other personal documents and data, and room for growth. Backup your library with this User Tip. Use the same technique to "restore" the backup to the new computer and then keep the backup up to date in future.
Deauthorise the old computer once you are certain that you no longer need to access protected content from it.
tt2

How do I transfer all my music, apps contacts etc for my iPad and iPhone to my new laptop from a desktop?

I can't update the software on my desktop because it's too old and no stores seem to have the "bridge" disc I need to upgrade my current system. So, I need to transfer my synch abilities for my iPad and iPhone from my desktop to my newer, more up-to-date laptop. What is the best way to do this? I have the apple base station also.

You will find these ueful:
How to use Migration Assistant:
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

Facing Issue while running from on desktop through oracle form builder 10g.

Dear All,
I am facing No plugin to show content error while trying to run oracle from on desktop through form builder 10g. please help.
Thanks,
Pradeep

I am facing No plugin to show content error while trying to run oracle from on desktop through form builder 10g. What is your OS version?
What Java version are you using?
Have you configured your Oracle Developer Suite (ODS) 10g to run forms from the Forms Builder?
Craig...

Editing contacts in gmail after export/import from Palm Desktop is a messy affair

So far, from what I can see, my contacts are synchronizing well between the Pre and my gmail contacts list. Being easily amused, I guess it's pretty slick the way it works. But exporting them from Palm Desktop and importing them into the gmail contacts list was just a jumbled mess. Almost none of the actual fields from PD mapped correctly to the gmail fields, so all of my info got lumped into the "notes" field in gmail.
It's easier and faster to edit them in gmail than on the Pre, so that's what I've been doing...fixing about 300 contacts one at a time. You can cut/copy/paste the info from the notes field into the correct data field. But there's one really weird thing that happens if you try to drag-and-drop info, say a telephone number or an address, from the notes field into its own field above. The data appears to move over. But once you save the change, anything you dragged into its own field disappears. Trying to go through the list quickly, I didn't notice this strangeness until I had gone through a large enough number of my contacts to really make me swear.
Post relates to: Pre p100eww (Sprint)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

smkranz,
I had a similar mess to clean up. I figured that Google's contacts would work better with an import from Outlook and a direct export from Palm Desktop 4.x or 6.x. I used Chapura's Pocket Copy to push my Palm Desktop 4.2 data into Outlook, and then exported my data from Outlook and into Google contacts. I followed Google's directions for that part. I still had to review my 400 or so contacts and do some mop up, but it wasn't a total train wreck.
Glad to hear that you did get a Pre. Welcome to the club. Now we have to work on WyreNut.
Alan G

Open/edit documents on SAP Content Server from BW?

Hi guys
I have been asked to investigate whether this scenario is possible.
Today we have a SAP Content Server where we save attachments to different kinds of objects. An example could be that we open appropriation request 'S-00123' from IMA11 and attach two different MS Word documents.
In BW I have created several reports that contain these appropriation requests and we would like to be able to attach/edit the files on the content server from the BW report.
Is this somehow possible using RRI or some other functionality?
Might it even be possible by using GoTo --> Documents with the appropriate setup?
BR
Stefan

Hello Friends,
Any luck??
Thank you,
Nikee

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

Error While fetching content nodes from Weblogic Portal

Hi,
I am trying to deploy an application on Weblogic server which will connect to Weblogic portal repository and fetch content nodes from the specified repository. While accessing the repositroy nodes from my jsp code I get following error:
I am not very clear what is going wrong
Error 500--Internal Server Error
com.bea.content.RepositoryRuntimeException: Repository configuration error.
     at com.bea.content.manager.internal.RepositoryManagerImpl.getRepositoryOps(RepositoryManagerImpl.java:194)
     at com.bea.content.manager.internal.RepositoryManagerImpl.connect(RepositoryManagerImpl.java:141)
     at com.bea.content.manager.RepositoryManagerFactory.connect(RepositoryManagerFactory.java:46)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getRepositoryManager(VirtualRepositoryManagerImpl.java:306)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getSearchOps(VirtualRepositoryManagerImpl.java:332)
     at com.bea.content.federated.internal.itemloader.NodeSearchItemLoader.fetchItemIdentifiers(NodeSearchItemLoader.java:68)
     at com.bea.content.federated.internal.itemloader.DirectAccessItemLoaderBase.minimalResolve(DirectAccessItemLoaderBase.java:17)
     at com.bea.content.paging.internal.PagedListImpl.(PagedListImpl.java:89)
     at com.bea.content.federated.internal.SearchManagerImpl.search(SearchManagerImpl.java:55)
     at jsp_servlet.__test._jspService(__test.java:133)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3370)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
Caused by: javax.naming.NameNotFoundException: While trying to lookup 'examplesWebApp.BEA_content.RepositoryOpsHome' didn't find subcontext 'examplesWebApp'. Resolved ''; remaining name 'examplesWebApp/BEA_content/RepositoryOpsHome'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1138)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:246)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:205)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:367)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at com.bea.content.ContentEJBHomeCache.lookup(ContentEJBHomeCache.java:56)
     at com.bea.content.manager.internal.RepositoryManagerImpl.getRepositoryOps(RepositoryManagerImpl.java:187)
     at com.bea.content.manager.internal.RepositoryManagerImpl.connect(RepositoryManagerImpl.java:141)
     at com.bea.content.manager.RepositoryManagerFactory.connect(RepositoryManagerFactory.java:46)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getRepositoryManager(VirtualRepositoryManagerImpl.java:306)
     at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.getSearchOps(VirtualRepositoryManagerImpl.java:332)
     at com.bea.content.federated.internal.itemloader.NodeSearchItemLoader.fetchItemIdentifiers(NodeSearchItemLoader.java:68)
     at com.bea.content.federated.internal.itemloader.DirectAccessItemLoaderBase.minimalResolve(DirectAccessItemLoaderBase.java:17)
     at com.bea.content.paging.internal.PagedListImpl.(PagedListImpl.java:89)
     at com.bea.content.federated.internal.SearchManagerImpl.search(SearchManagerImpl.java:55)
     at jsp_servlet.__test._jspService(__test.java:133)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3370)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(Unknown Source)

Repositories are essentially external to applications.
Applications are associated with repositories via repository configs. Repository configs allow applications to access repositories.
1. There is no special 'centralized repository'.
2. This can be done, but has caveats, especially around caching. If multiple applications have repo configs which refer to the same repository, there can be caching issues. For example, suppose apps A and B both have repo configs for accessing repo R. If you use app A to change some data in repo R, then try to read the change via app B, you can end up with cached data instead of the most recent data in repo R. This is something to be aware of with this type of configuration.
3. There is typically one WLP admin url per application. For example, if you have an application named 'FooApp', then the admin url can typically be found at 'http://localhost:7001/FooAppAdmin'. Application 'BarApp' may have an admin url at http://localhost:7001/BarAppAdmin.
You can use the weblogic server console at http://localhost:7001/console to see these -- click on Deployments, then click Monitoriing. In the Context Root column, you can see the various top-level context roots registered for this application.
4. Repositories are top-level possibly-shared entities, similar to databases.
Applications 'use' Repositories via Repository Configs.
Applications 'own' RepositoryConfigs, which allow them to 'use' a specific Repository.
It's possible to have multiple applications 'use' the same repository (each application would have to have its own RepoConfig referring to the same repository), but there can be caching issues with this configuration -- see (2).
Each application 'owns' its own set of repo configs, and therefore its own VCR namespace. The VCR namespace is compsed of the RepoConfigs that application 'owns'. For example, if an application has repository configs with names 'Repo1' and 'Repo2', then the VCR namespace includes /Repo1/... and /Repo2/...
Note that each RepoConfig entry has a name, which becomes its VCR namespace path. The path to a node in a repository begins with / followed by the name of the RepoConfig followed by /. Application A and application B may each be accessing Repo R, but via different names. For example, if A has the path to Repo R registered via name 'RepoR', then its VCR path to Repo R is /RepoR/... If B has the path to Repo R registered via the name 'R', then its VCR path to Repo R is /R/...

Is it possible for me to screen capture from one desktop while working on another desktop?

I would like to use QuickTime screen capture feature on Mountain Lion to record a video from Desktop 1, while working separately on Desktop 2. However, QuickTime records this by following my movements to Desktop 2 and then recording what I am doing in Desktop 2. Is there any way around this (either using Quick Time or perhaps a different program/software)?
Thanks

No.
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

Odd Alert While Editing a Post

During the last several days I've seen an odd alert some times when I edit a post. I'll post a message, then if I have second thoughts about the details of my post, I'll edit it. When I'm done I click on the poorly-labeled "Edit Message" button. A few times this has resulted in a pop-up box that states this:
http://discussions.apple.com
Are you sure you want to leave this page?
Your message draft has not been saved.
Click OK to continue, or Cancel to stay on this page.
If I click on "OK" my change is posted correctly.

For me, at least, it continues to happen when editing a post and not manually saving it before hitting the Edit button. Before the recent site maintenance, I believe saving was happening automatically, whether from the original post or from editing. The original post does still appear to be saved automatically as soon as one hits the Post button. This behavior seems to be happening only from Edit.
FYI using Firefox 3.5.8
Interesting: just now edited this post. Didn't get the alert when hitting Edit, and Save Now wasn't dimmed at the moment of hitting the Edit button, but when I returned for another edit, I saw that it had been saved. I guess this is erratic behavior. I got the alert earlier when editing in a different forum; could it depend on the particular forum one is in? I would think the alert is set to happen only when leaving an unsaved post, so the automatic saving must be what is erratic.
In any case, it's really not a big deal.
Message was edited by: WZZZ

I have a FreeAgent Goflex drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting

I have a FreeAgent GoFlex backup drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting the firewire. This also happens when I use the USB connection as well. Thanks

Did you use any of the "sleep" drivers supplied? I have found it best to just totally reformat/erase the drives and let the OS handle them.

Editing Content Posted From My Desktop G5 while I am on a remote laptop.

Similar Messages

Maybe you are looking for