Editing date but not time

I am trying to alter the date on a batch of photos but leave the time taken the same. Using batch change won't allow me to achieve desired results

Do not use batch change - use adjust date and time - just above batch change
LN

Similar Messages

  • [solved] Changing date but not time

    Hello,
    I already searched the web but all examples how to change date involved changing time as well.
    date -s "7 April 2008 20:42:45"
    date -s "7 April 2008 20:42:45"
    I need a script that does the follow.
    1. Save the current date
    2. Change the date to a defined one (but not the time because that conflicts with NTP)
    3. Start a program
    4. Wait for the program to be closed to restore the original date saved in 1.
    How would you write such a script in Bash without changing the time?
    Last edited by orschiro (2013-04-07 21:22:52)

    Thanks for your replies. I did not know that time and date are inevitably connected to each other and that changing date does always mean changing time as well.
    @Trilby,
    I indeed want to circumvent a trial-period. I am working on a Linux compatibility version of Prezi Desktop which is no longer provided in an official version. Many people contacted me with issues they are facing that I cannot testify as I do not have a 'Pro' account for which one has to pay. I generally pay for software but in this special case I do not want to pay for an account realising that in fact I cannot use the software due to compatibility issues.
    As such, I already tried libfaketime but I failed to get it working with Adobe AIR 32bit on my 64bit system. I am aware that I am doing something that I ought not to do but I am not willed to pay for broken software.
    @moetunes
    [orschiro@thinkpad ~]$ date -s '7 April 2008'
    date: cannot set date: Operation not permitted
    Mo 7. Apr 00:00:00 CEST 2008
    You see, date -s would reset the time to 00:00 which is not what I was looking for. I want to save my current time to restore it again after closing the program.

  • When downloading/uploading any file with Firefox, Finder shows date but not time

    On my iMac, as I either upload or download a file using Firefox after installing Lion, the Finder window that opens for me to tell it where to either download the file to or upload it from, shows dates of all the existing docs there, but not the time. How can I make it show the time as well?

    I have found the problem.
    A download manager had been installed for a specific website and it was butting in all the time. Even after removing it with 'Add or remove software' it still had its hooks into the system and it was impossible to download anything as it now would not run.
    Had to do an XP 'System restore' before I could get rid of it.
    The offending program was MD_setup.exe size 3,045KB from the themediadownloader.com

  • Forms field returning date but not time

    Hello everyone, I currently have a field in my database to store a certain date and time. However the corresponding field in my forms builder only seems to display the date and not the time. Does anyone have any idea why this is occuring?
    Thank you.

    also check if you have set a format mask. if so, make sure that time format is included.

  • Can photos have date, but not time?

    Though I've got a digital camera, in many ways I still prefer the "real" camera - however, I've now taken to getting all the films I have developed scanned & would like to merge them into relevant events.
    I can generally work out the date that something happened; but less sure about the time! I'm taking it, though, that it has to have the time in there somewhere?

    No - just use the data and a standard arbitrary time for unknown time - like midnight for example - or midnight for night photos and noon for daylight photos
    LN

  • The last update failed on my window 7 pc, resulting in me having to try it manually download and install, this also failed leaving my I tunes not working, I tried restore back to a safer date, but every time it tried to update it failed. eventually i

    The last update failed on
    my window 7 home prermium pc, resulting in me having to try it manually download and install,
    this also failed leaving my I tunes not working, I tried restore back to a
    safer date, but every time it tried to update it failed. eventually it told me
    to delete and reinstall, this fails due to the apple mobile device service
    failing to start, and asking me if I have sufficient privileges to start system
    service, I have tried all suggestions on iTunes page, ie delete everything to
    do with apple, and start as administrator, nothing works, help please

    I too have tried the latest iTunes (12.1.1.4) in Win7. I did a search for latent drivers as you noted but found none. I am glad it worked for you - I'm still no-joy at this point. I'm able to install AMDS over and over again, without issue - it just doesn't start then iTunes launch fails with Error 7. I have to manually remove it.
    I am able to connect my iPhone via USB cable and access my photo storage on the phone. I am just not able to install iTunes anymore. I have attempted resolution to this issue for almost two months now. Until that time, I was content with what was installed. It was only when the proverbial update box appeared that I attempted to 'update' my iTunes. WHAT A MISTAKE putting blind faith into an Apple request to update. I SUGGEST NOT TO UPDATE YOUR ITUNES IF IT IS RUNNING PROPERLY!
    I realize now, once again I might add, my reliance on software provided by others. It's like anything else, I shouldn't rely on just one method for anything. Time to search for a more pleasant alternative than Apple. Truly, when it worked, it was good at its job, but now that I am wasting time I am looking seriously at upgrading to another type of smartphone and media management software. Way too much trouble for anything as simple as this should be. I wonder, is this a result of another feud with Microsoft?

  • Selecting records from multiple dates but specific time

    Hi:
    I've to select records of multiple dates but the time should be 00:00:00 to 06:00:00 (i.e. 12 AM - 6 AM)
    For date part this can be done:
    WHERE
    START_TIME BETWEEN TO_DATE('04-01-2012', 'MM-DD-YYYY') AND TO_DATE('04-05-2012', 'MM-DD-YYYY')
    But how can I fix the time mentioed above.
    Please let me know.
    Thanks/Tanvir

    WHERE
    START_TIME BETWEEN TO_DATE('04-01-2012', 'MM-DD-YYYY') AND TO_DATE('04-05-2012', 'MM-DD-YYYY')
    and start_time - trunc(start_time) between 0 and 6/24start_time - trunc(start_time) will give you the fraction of a day. So 6/24 means 06:00.
    (When you use to_char(trunc(sysdate,'hh'),'hh24') between 0 and 6 you will also retrieve records with start_time 06:01 for example. So this would not meet your requirements as far as I understood.)
    Edited by: hm on 10.04.2012 01:26

  • Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month?  I can repeat on the date but not the day of the month.

    Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month?  ( I can repeat on the date but not the day of the month.)

    Not with the stock calendars app.

  • HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me

    Please I need help regarding this problem I faced today.
    I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me?

    Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
    Errors related to downgrading iOS
    The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

  • The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

    The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

    I agree and I found your post because I did a google search ical typeface dim.
    If I find anything out, I will post back here.

  • Sap treasury flow is due before accrual/deferral key date, but not posted

    Hi,
    I run TBB1 - posted business transactions - all transactions posted
    when i run the tbb4 for product type 51a i got the following error
    sap treasury flow is due before accrual/deferral key date, but not posted
    Please see the image

    Hello, Krishna.
    You haven't posted flow types 1150.
    Please go to your transaction, select "Cash flow" tab, Choose layout "106 Posting view", select flow type 1150 (one from your first screenshot above - use flow type and date) and check "Posting status" field - what's inside (please, provide screenshot)?
    NA T2104
    Short Text
    Flow is due before accrual/deferral key date, but not posted
    Diagnosis
    The corresponding flow is due before the accrual/deferral key date, but has not yet been posted; this may result in the incorrect amount of expenses or revenues being displayed in financial accounting.
    System Response
    The flow is treated by the accrual/deferral function as if were already posted, i.e. the related expenses or revenues are accrued/deferred, where appropriate.
    Procedure
    Post the flow to correct the amounts of expenses or revenues shown in financial accounting.

  • ECC Master data does not time dependent

    Hi,
    I have a question . In ECC i have Functional Locational master data object which is not time dependent. Client need time dependent report in BW but they are not able to set time dependent in ECC. is there any solution in BW to convert normail object to time dependent Object.
    Note: getting delta though funtion module.
    Please help me....
    Thanks
    Edited by: Pria Gupta on Dec 18, 2011 5:31 PM

    any comments any suggestion please
    Edited by: Pria Gupta on Dec 19, 2011 3:45 PM

  • Mountain Lion 10.8.2 Heavy background disk activity but not time machine

    Since accepting the Software update that puts my version of ML as 10.8.2 I have began to notice a regular (every hour) constant heavy activity in one of my drives (yet to identify which one).
    The said drive(s)?? whirr up and carry out activity that sounds as if it were carrying out a time machine backup BUT there is no indication that time machine is carrying out its job nor are any of the backups date/time stamped for the activity taking place.
    Any ideas as to what is happening would be greatly appreciated as it is becoming rather annoying to listen to heavy background activity without being able to identify what is happening.
    Thanks in advance
    Les

    Hi, Was looking through the forum because of a similar issue that occured twice yesterday. I was cleaning up and consolidating my externally connected disks (too many backups) 1 x USB connected, a NAS store and my Airport time capsule.  After a long session of deleting files I got the spinning globe on the finder window, I could not access other apps to look at what was going on, but I could here the  Time Capsule rattling away. Left it for 20 mins still the same, so had to crash the system to recover (hold power button in).  Four hours later and more tidying up, went to shut down and again heard the Time capsule rattling away but this time I got to the white screen and the spinning circle. Twenty minutes later still not shutdown so another crash of the system.
    I am not sure whether this problem is the same as you have described but there are similarities hence I thought I would post.
    Hope we can find a resolution
    Apologies need to update my profile, have iMac 27inch with 10.8.2
    Jim

  • How To Duplicate Songs In A Playlist To Edit Info But Not Lose Original?

    I'm making a Christmas playlist and want to edit the info on the various songs -- I'll add my own "album artwork" and will change the track info so each of the 25 songs is numbered 1 of 25 ... 25 or 25
    bla bla bla
    How best do I deal with the playlist so I can make my changes for this project but not lose the original info associated with each song? For example I'll want to add my artwork this time but want the original file to still have the original artwork, track number, album name, etc.
    what's the easiest way?
    Thanks

    Wow ... a flurry of comment on what I thought was a basic question
    Many thanks to all!
    I am not aware of the "automatically add to iTunes" function -- is it a folder, a button, a menu item, ...? I don't see it in my iTunes and there is no mention when I did a search in the help. I'm sure it is right in front of my face.
    What I was thinking of doing was dragging the songs to my desktop and then dragging back. But am I then going to get messed up with the file being recompressed?
    Interesting stuff!
    Thanks again.

  • I as a webdeveloper can edit site - but not the invited publisher?

    Hei, I have a strange problem. I invited 2 cclients, to try out ICE and with the first client as publisher it was immediately successful.
    I invited him to a second site, but this time the answer was, no editable region. But I can edit it on my account and all codes are the same than on the first site, which the client is able editing and publishing.
    Today I invited another customer and the same problem occurs - I can edit the site, but she cant. I invited her as a publisher.
    We even changed roles, by setting up an account, where she invited me as the publisher and she was the webdeveloper.
    The same thing occured, that I could edit and publish but she couldn`t....this is not logical to me!!!
    Please help.
    Sincereley
    A. Christen

    The typeface has to be on the computer of your visitor as well.
    If not, an replacement typeface will be used.
    Either iWeb provides the alternative, or the browser chooses one.
    It's not iWeb specific.
    Here's how I solve it :
    http://www.wyodor.net/mfi/global/Blank.html

Maybe you are looking for