Editing Demo, Simulation and Training simultaneously

Hi all,
is there anyway to change the demo, simulations and training captivates simultaneously?
At the moment, I am working on a project where the starting point is the Demo file. I am making changes to the Demo and then have to go into Simulation and training files individually to make these changes which is really duplicating work..
I would really appreciate if someone can point me to the right direction.
thanks

Lily thanks for your help..
I am using Captivate 5. I have captured a project and made changes to the Demo file ie reworded captions and deleted some slides. I was hoping if there was any way simulation and training files can update depending on what I do on Demo.
Its a nightmare going through each single one of them
thanks

Similar Messages

Captivate 5.5 Template -- Settings for Demo and Training modes

Hi
I am trying to create a Captivate 5.5 template for our simulations which will be captured in both Demonstration and Training modes.
In the template file, I go to Edit > Preferences > Modes, select the both the modes (from the drop-down list) and make required settings, and save the template.
Now, when I try to record a new project based on this template, I am asked to select any one of the modes. As a result, I get only one type of output. How to get both modes in one go? Is there a workaround?
Thanks for your help.

You'll need to add your simulation capture slides to the template AFTER capturing the two outputs. The template can only really be used as a shell to add introduction and conclusions, as well as quizzing etc.
Since (as Lieve points out) you end up with separate files for each different output, you'll also need to use the templates to create a shell project for each different output, and then paste the slides from the captures into the shell as it were.
Quite frankly, you're better off doing things this way anyway (capturing first and then pasting the capture slides into another shell project) because in any capture project you need to do quite a bit of editing and culling of duplicates or redundant captures. It's quicker and easier to do this editing when the project file is smaller. So what I do is clean up my captures first to get down to the minimum number of slides required for the simulation, and then paste those slides into my project file generated from the template. I do the copy/paste after culling out the unnecessary slides, but before saving the capture file. That way, I always have all of the original captures as a backup in case I went too far in the culling. Only after the project has been finalised to I go back and delete the original captures.

Getting DEMO and Training the same

We have a requirement that all users should be able to select either the Demo or Training recordings. When I record with the two selected I end up with two seperate tabs in the captivate window after pressing END.
If I then go and modify the Training session putting in notes, extra information and formmatting, how do I then transfer the same changes to the Demo version? Is there a way to copy all changes from one to the other? How do I publish both recordings at once as currently I have to do them seperately?
If I originally recorded just the training mode, can I convert it to a demo after I make all my changes?
Likewise I have several recordings that were done as demos and now I need them to be Training, how do I convert them without having to re-record it all again?
Hopefully someone has some answers to these questions, becuase without this flexibility, the Captivate program just does not meet our companies requirements for a help tool.
Thanks.

Hello and welcome to the forum,
In this thread I ust answered some of your questions about the demo/training files.
http://forums.adobe.com/thread/915684?tstart=0
You cannot publish both at once, you can however copy all the slides and have one big file in which you can insert a branching possibility and then publish that one file.
The differences (default) between the three kind of Automatic captures are to be found in the Preferences, Recording, Modes. There you'll see what Captivate is inserting for each mode. If you want to modify a file manually you'll have to reproduce this. Some examples of the work flow for changing a demo mode to training:
delete the mouse object on each slide where it is present
delete the highlight boxes that were added on click locations and add click boxes in that location with the captions you wish
delete the text captions that were automatically added
if text was typed during capture, replace that typing object by Text animation, delete it then and replace by a Text Entry Box that you'll have to configure
You see this is quite a lot of work, but can be done. If possible I experienced that capturing again is a timesaver compared with changing manually.
If you find another application with the same extended functionalities for software tutorials, please post it because I have not found that 'white blackbird' until now.
Lilybiri

I cant copy/paste from an article to my web site, get a Mozilla Rich Text Editing demo page will not work.HELP

Tried to copy/paste from an article to my web site and got a "cannot copy /paste " warning and was directed to a security perferences site that said that Mozilla Rich Text Editing demo page will not work.
Tried to find my Firefox profile directory using the start menu and was directed to hit enter to go to web. Feel like i am getting run around.

Let's start with something very basic, and that is, you do not need to use the paste button on most websites. The button just reads what is on your clipboard and sticks it into the form. You can do that yourself using Ctrl+v or right-click>Paste.
For your security, I suggest using those standard Windows keyboard shortcuts (Ctrl+x cut, Ctrl+c copy, Ctrl+v paste) or the context menu.
Occasionally you will find a paste button that runs a clean-up script or otherwise does something useful. That is where the (admittedly a bit complicated) instructions come in handy.
To open your active profile folder, you can use:
Help > Troubleshooting Information > "Show Folder" button
Which help article are you using for the modifications?
Finally, please be cautious in opening up your clipboard to sites. You may have stuff you copied from other pages or other programs that you do not want to share with most sites.

Creating a data simulator and geting an error i cant figur out

I am new to labview and i am using labview 7.1 student version. I am
creating a data simulator and geting an error in my for loop. I have
attached my program. if someone can help it would be appreciated.
Attachments:
Data Simulator.vi ‏117 KB

Hi marcv,
When I open your VI it's broken and the error seems related to this term in a formula node:
Y=5*X^4 (The ^ function wants an integer, but X is a float)
To raise X to the 4th, try:
Y=5*pow(X,4)
Cheers.
Message Edited by Dynamik on 04-15-2006 07:06 PM
Message Edited by Dynamik on 04-15-2006 07:10 PM
When they give imbeciles handicap-parking, I won't have so far to walk!

Will the iphone 5s support talk and data simultaneously?

Will the iphone 5s support talk and data simultaneously? Didn't hear anything about it so just want to confirm.

musaabo wrote:
Will the iphone 5s support talk and data simultaneously? Didn't hear anything about it so just want to confirm.
No.
(I'd put the link up but I think Verizon would delete/edit my post).
From a New York Time's piece, "It was Apples decision to design the iPhone 5 so that customers could only make voice calls and do Internet activity simultaneously only over Wi-Fi, not over Verizon cell network."
The reason why...
"The explanation for this, it turns out, is complicated. The technology in 4G LTE networks does not currently handle voice transmissions; it only does data. So when you place a phone call on a 4G LTE smartphone, it’s actually rolling back to the carrier’s older second- or third-generation network, according to AnandTech, a Web publication that does deep analysis on hardware."

Documentation and training manuals

Hi,
I am looking for training users on databases mainly topics are
     Database
1.     Basics of Database
2.     Database Vs. RDBMS
3.     Data Backup & Archive
I am preparing a dataset and training manual both.
Database is 10g.
The users are not familiar with oracle, please could you suggest any links for documents or any training materials
availlable online.
thanks
regards
Edited by: user12134253_xavierite on Aug 9, 2010 1:48 AM

Hi user;
I am looking for training users on databases mainly topics are
     Database
1.     Basics of Database
2.     Database Vs. RDBMS
3.     Data Backup & ArchiveYou can find all related note at:
10g Release 2 (10.2) Documentation library
http://www.oracle.com/pls/db102/portal.portal_db?selected=11&frame=
I am preparing a dataset and training manual both.
Database is 10g.
The users are not familiar with oracle, please could you suggest any links for documents or any training materials
availlable online.
thanks
regardsI suggest please check below link which is below Tim Hall. It is really great for installation and other things
http://www.oracle-base.com/articles/10g/Articles10g.php
I belive those links will answer your questions. If you have any problem please update thread
Regard
Helios

Is it possible to do the audio capture and playback simultaneously?

In short :
Is it possible to do the audio capture and playback simultaneously? . If it is not supported directly by Sun, pl suggest another way to achieve the same.
In detail:
I am doing a voice chat application by using the streaming through UDP . I am able to play the byte stream. But , is it possible to capture sound simultaneously (while playing the audio) to send to the other end?
Edited by: dhillarun on Jan 4, 2008 7:11 AM

If you're Airplaying from you computer, you might be able to do this. Here's what I would try:
Go to the Airplay icon in iTunes. You should see both your Apple TV and your speakers listed as options. Select "Multiple speakers." You'll see both devices together. Turn the volume all the way down on the Apple TV. You should be getting the video on the TV, but only hear audio through the speakers.
Using the "Multiple Speakers" option will sync the output of your devices so that the sound matches the picture.
I haven't tried this myself, but I'm thinking this would work. However, this approach will only work when using Airplay from your computer – not from am iPad or iPhone – as they don’t have the "Multiple Speakers" option (as far as I know). It also won't work with content streamed directly to your ATV, obviously, because there's no way to stream from ATV to other devices.
Let me know if this works.

SAP HR --PD and Training and Event Management

Dear All,
I am very new to Personnel Development and Training and Event Management, Which details I need to get from the client to prepare the BBP for PD and Training and Event Management.
Kindly help me
Thanks and Regards
Chaitanya Reddy
Edited by: Mudupu123 on Jul 6, 2009 7:25 AM

Hi,
Please check the following questionnaire.
http://saphrexpert.blogspot.com/2008/12/questionairre-to-be-used-during.html
All you need is there.
Regards,
Dilek

Add 3D Modeling, Simulation, and Animation to LabView

I am posting to announce the availability of RoboWorks software.
RoboWorks is an easy to use software tool for 3D modeling, simulation
and animation of any physical system. It provides an inexpensive
alternative to hardware (especially robotic) and brings 3D simulation
to every desktop. When using RoboWorks you will benefit from:
* Extremely intuitive model development
* High quality, fully interactive 3D graphics
* Lightweight files that conserve disk space
* Full animation, even while building your model
* Interfacing with popular software packages
Most analysis and visualization software such as Matlab, MathCad, and
LabVIEW support graphics limited to charts and graphs. RoboWorks adds
3D modeling a
nd animation capabilities to these software packages. Now
you can do your analysis in the software of your choice and visualize
and animate your results in RoboWorks.
RoboWorks supports interactive animation via the keyboard (animate as
you build your model), through a data file, or through RoboTalk.
RoboTalk is an Open Source applications programming interface that
allows programs running on any platform that supports TCP/IP to
interact with and control RoboWorks models in real time. For example,
your control program running on Linux can now control your mobile robot
simulation in RoboWorks in real-time.
RoboWorks comes with full-featured help and a variety of sample models
such as those shown at left. Also included are sample RoboTalk
programs, LabVIEW support, program-interfacing support through DLL's
and RoboTalk source code for non-supported platforms.
For more information email us at [email protected] or visit
www.newtonium.com.
Platforms: Win 95/98/NT/2000. Any system
with TCP/IP for RoboTalk.
Regards
Chetan Kapoor
Newtonium
www.newtonium.com
Sent via Deja.com http://www.deja.com/
Before you buy.

Well, what you mention in your two sentences is somewhat of an Oxymoron. 3D modeling and animation, decent software and simple to use don't belong in the same sentence let alone paragraph. This is a FCP forum but I'll answer with my 2cents as I am a motion graphic artist that does 3D animation. There are about 6 different 3D applications that are worth their salt. Maya, 3ds Max, Softimage, Cinema 4D, Houdini and Blender. All are quite capable. None are what I would call simple to use. If you want to do 3D animation you need skills in modeling, texturing, rendering, lighting, rigging, animation, dynamics, drawing and script programming just to get started. If you are not up to spending the time and effort in having someone train to learn these skills and to spend the $$ for the hardware and software, what I would recommend is outsourcing your initial projects to get you started so you get an appreciation for what is really required to do the job and then once you understand all that is needed, you will have a better understanding of what software would fit for what you are trying to accomplish.
BTW I do freelance work.

Preserving edited titles, dates and comments

Via batch changes and individual editing, I managed to organize all of my photos chronologically on my Macbook - to the best of my knowledge. However, when I try to import them to my iMac, all the edited data is lost and it reverts to either the current date of import or the old incorrect data. Is there software or a technique that will help me preserve my edited dates, titles and comments during import or export?

I have a couple of questions:
1) the edited dates, titles and comments are not remaining intact during the import, even with iPhoto Library manager. I only imported the "Modified" pics and received duplicates of every one.
2) During a ProCare one on one training, I was told not to mess with the "Originals" folder, so I didn't import it. What will happen if I do?
By the way, I put iPhoto Library Manager on my Macbook and my iMac. Is there a way to merge the libraries together and preserve the corrected dates, titles and comments? I may need a play-by-play on this.

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Is it legal to sell photos edited in trial and beta verisons of Photoshop?

I recently downloaded the new CS6 beta version of photoshop and since I am interested in stock photography I was wondering if it's legal and not againts Adobe's rules to sell photos edited in trial and beta versions of Photoshop? I mean, since you haven't bought them and just trying them out.
I really haven't found info about it, yet. Adobe terms and policy are little overwhelming
Thanks.
p.s. I hope I asked the question on the right place

The last time that I read the EULA, the only restriction on commercial or production work was on beta/pre-release software. So you could use the CS5 trial but not the CS6 beta.
See section 4.a . here:
http://www.adobe.com/misc/terms.html

Unable to uninstall Starter Editions 3.0 and 3.01

I have previously had Starter Edition 3.0 installed on my Windows XP O.S. but it was deleted in error. Use of the "Search" facility shows that there are NO Photoshop folders or files now installed in my system. I downloaded Starter Edition 3.2. with a view to starting over again.When this program attempted to install, it soon displayed a message that it had encountered previous Starter Edition programs and would remove them. It could not do so. The "Add or Remove Programs" facility shows that Starter Editions 3.0. and 3,01 are still installed, which is not possible. When an attempt is made to either repair or remove 3.0, a message is diplayed, stating "Internal Error 2753 ADS 2 EXE", and then, when "ok" is clicked, "Fatal Error during installation". When an attempt is made to remove 3.01 it very soon shows a message "Installation interrupted,Starter Edition 3.0 is either not installed or is in need of repair" Any suggestions as to how to remove either programs from the O.S. or the whereabouts on the Adobe websites that I might find a solution would be much appreciated. I have tried downloading Starter Edition 3.0 afresh and reinstalling but it will not install and the same messages continue to be displayed. Regards - Maurice.

Hello to those who have viewed this thread. I have now resolved my problems by downloading,installing and using a free software from a search engine. The software, Revo Uninstaller 1.5, the latest version available to me, has fulfilled it's work on each occasion and always at the first attempt. It can even clear up after itself. I hope that this info. will be of help to some of yourselves. I now regard this thread as closed and would like to thank those that have helped. Regards - Maurice Nutting.

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not curre

I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not currently authorized for use with your Adobe ID." It does it with every single book. I've never had this problem before. I've tried everything! Please help.

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

Editing Demo, Simulation and Training simultaneously

Similar Messages

Maybe you are looking for