Editing doesn't bring up PSE13 when requesting it through iPhoto

I have an iMac version 1010.1. I just installed PSE 13. I would like to store my photos in iPhoto but edit my photos with PSE 13. I set up a link, i.e. in preferences, I asked that when I hit "edit" at the bottom of the page in iPhoto, it would take me directly to PSE 13. I did this with no difficulty in an earlier version of PSE (9), but nothing happens when trying it with PSE13. Please respond by email, since I don't come to this discussion forum often: [email protected] Thank you!

You need to first do the set-up in iPhoto prefs.
- Open iPhoto and choose iPhoto >> Preferences.
- Select the General tab.
- Click the Edit Photo menu and select In Application.
Then navigate to:
Applications/Adobe Photoshop Elements 13/Support Files/Photoshop Elements 13 Editor
Highlight the editor application (Photoshop Elements 13 Editor not Adobe Photoshop Elements 13) and click Open
Then close iPhoto Prefs.
N.B. Make sure you choose the application not the alias
You should now be able to edit normally from the iPhoto Library e.g.
Double-click to edit in iPhoto editor.
Control (right) - click on a thumbnail to edit in elements editor.

Similar Messages

Double tap on locked screen doesn't bring up controls when no album art

I think this is a bug, can others confirm please? It's pretty easy to test. Using the iPod Touch 4th gen 32 GB with iOS 4.1. When playing music, and the screen is locked and turned off, double-tapping the home button brings up the music controls only when there is album art with the song. If there's no album art (only the home background shows, the controls don't come up with double-tapping. You have to triple-tap in this case (one to bring up the "slide to unlock" screen, and two to bring the music controls).

it's the same with iOS 4.2. Does this not annoy anyone else? Triple tap just to change songs is kind of annoying.

My computer doesn't recognize my iPod when hooked up through a USB port?

I restarted my computer and my iPod, and it doesn't work. The iPod does not recognize being hooked up to a computer, and the computer does not recognize that the iPod is hooked up to it. My iPod's not even charging when connected to my computer. This first occured when I disconnected my iPod from my XBox 360 while the 'Do Not Disconnect' screen was shown. However, the iPod still works with my XBox 360 as well as my AC adapter charger. The iPod also does not show in Device Manager, so it's not recognized by Windows or iTunes. Any help is greatly appreciated, thanks in advance.
Windows XP Windows XP Compaq Presario Intel Pentium 4

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Yu need iTunes 10.5 or later

Quick question when purchasing prints through iPhoto

Just a real quick question.
When I select photos I want to purchase from my iphoto collection, i know it hooks into Kodak. My question is, is an account created for me on Kodak's site that keeps my collection and allows me to log in from anywhere to view photos, buy photos? Does it allow me to share albums that friends and family can view and buy photos from as well?
I've never used the service before, but I would like to, assuming it allows me to do the above stuff I mentioned.
Thanks,
Jason

Create an album and drag the photos you want to print to it, crop them to the print dimensions, select all of the photos in the album and order your prints
LN

Firefox doesn't exit when requested!

Hi, I'm running FF 3.6.3 on Vista SP2, and FF doesn't want to close when requested either through Alt-F4, right-top box or whatever... I have to open the Task Manager and kill it when I shut down my PC! Any clue?
Thanks in advance for any help!
Jean-Luc
== This happened ==
A few times a week
== ??

'''Instructions for Safe Mode and Troubleshooting'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

Anybody that I add to my bbm service doesn't seem to get any request to be added nor do I get one when they add me

I need some help guys, I have a BB 8320 Vodafone which was from the UK and the person that I took it from unlocked the phone and passed it on to me now. I have a few issues with the BBM service.
I have recently activated my BBM service by choosing a particular plan that my carrier offers, and I have noticed that the edge now can be seen in uppercase which means the service has been activated and should work. But, anybody that I add to my bbm service doesn't seem to get any request to be added nor do I get one when they add me. I have been facing this problem with my BBM and I am not sure how to go about it.
I need a few clarifications first and foremost, when a BB 8320 phone is unlocked does it mean the phone has been unlocked so other carrier sim cards work or all the feature on the BB 8320 phone unlocked. Secondly, considering i'm in a situation like this, what should I be doing to resolve this issue at the earliest, do I go to a technical desk guy and ask them to re-install the Black Berry OS on to my phone all over again or do I just throw away this piece of **bleep** that BB has created?
And could anybody let me know doesn't BB have a universal software that let people put any sim card and work rather than have carrier specific software? Please need help really bad on this one!!
I would really appreciate if some body can help me out in resolving this issue with your comments.
Thanks much in advance who ever you may be!

It really doesnt work not e en on my bberry8350

When I enter a search in the Mozilla Start Page and press enter the browser does nothing. It doesn't bring in any search results. I use Windows Vista pack2

I just upgraded Firefox for windows to version 21.0
After upgrading, when I enter a subject to search in the search box (in the middle of the page) of the Mozilla Start page and press enter nothing happens. It doesn't bring in any search results.
The only way to navigate using the browser is to enter the website name in the address box at the top of the page and press enter. I'm running the browser for Windows Vista - 32 bits.
I tried re-installing firefox and I got the same result. I also tried re-booting after installation and it still behaves the same way.
Please help,
Thank you,
Hektor

he man check here
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

The wait operation timed out. (Exception from HRESULT: 0x80070102) when requesting for pushNotification channel

Hi, I have been trying for push Notification Services in Windows 8 Store Apps. I am requesting For notification channel in the following manner
publicasyncvoidregisterChannelForNotification(
try
TileUpdateManager.CreateTileUpdaterForApplication().Clear();
BadgeUpdateManager.CreateBadgeUpdaterForApplication().Clear();
varvProfile =
NetworkInformation.GetInternetConnectionProfile();
if(vProfile.GetNetworkConnectivityLevel()
== NetworkConnectivityLevel.InternetAccess)
varvChannel =
awaitPushNotificationChannelManager.CreatePushNotificationChannelForApplicationAsync();
varvBuffer =
CryptographicBuffer.ConvertStringToBinary(vChannel.Uri,
BinaryStringEncoding.Utf8);
varvUri =
CryptographicBuffer.EncodeToBase64String(vBuffer);
varvClient =
newHttpClient();
try
varvResponse =
awaitvClient.GetAsync(newUri(Constants.SERVER_URL));
if(vResponse.IsSuccessStatusCode)
sendDeviceTokenRequest(vChannel.Uri);
catch(HttpRequestException)
catch(Exceptionex)
This gives me the exception,The wait operation timed out. (Exception from HRESULT: 0x80070102) when requesting for pushNotification channel. What could be the possible reason and how to solve this issue
Nikhil Sharma10

Hi,
I have currently the same problem with requesting a push channel.
But iam not sure if it is a problem with my phone, or my application.
I cant get rid of this error. The solution says: "retry the channel request later". But it doesn
matter if I retry the channel request later (triggerd by pressing a button) the same day or the next day.
I resetted my windows phone, installed the newest dev preview, but it is still not working. But the same code worked a few months ago. On the same phone.
Thats why Iam not sure what I changed (accidentally) in my app code which causes now the 0x80070102 error.
Any ideas why the same code is not working any more?
Thanks
Greetings from Germany
Simon

Only edit objects from package ZPACKAGE in local requests

Hi Experts,
I was adding a secondary index to a Ztable present in a package ZPACKAGE. When I tried to save in a workbench request, I got the error message "You cannot use request XXXXXX". I then created a local change request where the target system is not mentioned in the transport request. I was able to save the index and later I mentioned the target system. When I tried to release the transport request, I get the message "Only edit objects from package ZPACKAGE in local requests". Kindly suggest what can I do save the changes in a transport request and release it.
Thanks

Check out the transport layer and target system for that transport layer. As someone suggested, talk to your basis.
This is most common when you have the actual table in temp folder but the index stored in Zpackage.
I would first check my objects package to make sure that they are in right package. If everything @ right place, then i will check the package transport layer and software component then check the 'use access' of the package. if the package is good then check the transport path and target systems for each transport later.

Transport error: "Only edit objects from package CL in local requests"

I have made changes to an SAP original program as per Note 1096366 on SAP's service web site. The program is an Include program (LCLCMFMZ). I have assigned it a transport number, but it keeps trying to make the target local. When I change the target to DEV, it will not transport and I get the following error:
"Only edit objects from package CL in local requests"
Does anyone know what this error means?
Thanks.

Thanks Nick,
but I think I have figured it out. I needed to create a transport of copies (from se09) and include this object in that transport (right click and choose 'Include object...'). Then back to se01 and display all transportable object (including transport of copies). Then select my transport of copies, choose a target system (from double clicking and going to properties). Only then would it let this object get transported.

Java GSS API - Kerberos - Receive timed out when requesting service ticket.

Hi,
I'm following the following exercises about Kerberos/JGSS-API :
http://java.sun.com/javase/6/docs/technotes/guides/security/jgss/lab/
On exercise 3, I get an exception (when requesting a service ticket) from the client side:
"+Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentials provided (Mechanism level: Receive timed out)
etc.+"
This seems to happen when the GSSContext.initSecContext(...) method is called.
The server side receives the client connection:
"+Waiting for incoming connection...+
+Got connection from client /xxx.xxx.x.xxx+"
But then displays the following exception:
"+Exception in thread "main" java.security.PrivilegedActionException: java.net.SocketException: Connection reset
etc.+"
I checked my KDC (win 2003 Server SP2) and added SPNs with setspn but the error remains.
Any suggestion are more than welcome !

The TGT is already present on my Client machine because it is acquired automaticaly from the KDC during the Windows opening session.
I use then JAAS to access the LSA and obtain the TGT - This doesn't need any further connection to the KDC.
But the Service Ticket is requested to the KDC by my client machine..
Here is the complete output (Client side) after I destroyed the tickets (with Kerberos MIT Leash.exe and/or kdestroy.exe ):
Debug is true storeKey false useTicketCache true useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
+>>>KinitOptions cache name is C:\Documents and Settings\user.MYDOMAIN\krb5cc_user+
+>> Acquire default native Credentials+
+>>> Obtained TGT from LSA: Credentials:+
[email protected]
server=krbtgt/[email protected]
authTime=20080529135209Z
startTime=20080529135209Z
endTime=20080530015209Z
renewTill=20080702135209Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Principal is [email protected]
Commit Succeeded
+Authenticated principal: [[email protected]]+
Connected to address host1/xxx.xxx.x.xxx
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri May 30 03:52:09 CEST 2008
Entered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri May 30 03:52:09 CEST 2008
Service ticket not found in the subject
+>>> Credentials acquireServiceCreds: same realm+
Using builtin default etypes for default_tgs_enctypes
default etypes for default_tgs_enctypes: 3 1 23 16 17.
+>>> CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumType+
+>>> EType: sun.security.krb5.internal.crypto.ArcFourHmacEType+
+>>> KrbKdcReq send: kdc=yyy.yyy.y.y UDP:88, timeout=30000, number of retries =3, #bytes=1262+
+>>> KDCCommunication: kdc=yyy.yyy.y.y UDP:88, timeout=30000,Attempt =1, #bytes=1262+
SocketTimeOutException with attempt: 1
+>>> KDCCommunication: kdc=yyy.yyy.y.y UDP:88, timeout=30000,Attempt =2, #bytes=1262+
SocketTimeOutException with attempt: 2
+>>> KDCCommunication: kdc=yyy.yyy.y.y UDP:88, timeout=30000,Attempt =3, #bytes=1262+
Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentials provided (Mechanism level: Receive timed out)
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at javax.security.auth.Subject.doAs(Subject.java:396)+
+     at SimpleAuthzz2.loginAndAction(SimpleAuthzz2.java:56)+
+     at SimpleGssClient.main(SimpleGssClient.java:36)+
SocketTimeOutException with attempt: 3
Caused by: GSSException: No valid credentials provided (Mechanism level: Receive timed out)
+     at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:659)+
+     at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)+
+     at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)+
+     at SimpleGssClient$GssClientAction.run(SimpleGssClient.java:121)+
+     ... 4 more+
Caused by: java.net.SocketTimeoutException: Receive timed out
+     at java.net.PlainDatagramSocketImpl.peekData(Native Method)+
+     at java.net.DatagramSocket.receive(DatagramSocket.java:662)+
+     at sun.security.krb5.internal.UDPClient.receive(UDPClient.java:77)+
+     at sun.security.krb5.KrbKdcReq$KdcCommunication.run(KrbKdcReq.java:278)+
+     at java.security.AccessController.doPrivileged(Native Method)+
+     at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:195)+
+     at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:140)+
+     at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:106)+
+     at sun.security.krb5.KrbTgsReq.send(KrbTgsReq.java:215)+
+     at sun.security.krb5.internal.CredentialsUtil.serviceCreds(CredentialsUtil.java:293)+
+     at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(CredentialsUtil.java:106)+
+     at sun.security.krb5.Credentials.acquireServiceCreds(Credentials.java:561)+
+     at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:585)+
+     ... 7 more+
It seems like the TGT is still present in the cache, even if Leash displays "no tickets".
Meanwhile, in the KDC-server side:
-What is the correct spn to add? C:\setspn GssServer/host1 user ? (I in fact tried many possibilities)..
-Is there any other special configuration to do in the KDC ?
Thanks a lot!

I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown." Any advice? Thanks!

I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown." Any advice? Thanks!

have you tried doing a save as to a different location? If that doesn't work, do a search here. I seem to remember people having the same problem.
You could also try doing an xml export (I think 5.1 has that capability).

I edited a movie on iMovie but when i try to upload it to youtube only half the video shows ( its only 3 minutes long) does it need converted? help?????

i edited a movie on iMovie but when i try to upload it to youtube only half the video shows ( its only 3 minutes long) does it need converted? help?????

I have the same issue. If you are exporting from iMovie version 10.0.1, I run into the same issues if I export directly to YouTube or if I export to file then upload to YouTube.
Google's help file doesn't properly address this problem and thier help is also out of date. In talking to a support rep at Apple, they said the export to YouTube should just work or the exporting to a file then uploading otherwise it's an issue for Google support.
If someone can post a solution that works (is a streamable format - which is different than the format that YouTube accepts as it will accept many formats but take a long time to process them), I'd be interested to hear also.
Thanks,
Rob.

Transferring Actions Palette.psp to new CS3 location doesn't bring up my old actions!

Transferring Actions Palette.psp to new CS3 location doesn't bring up my old actions! Hmm...am I missing something? I saved an old version of the .psp file. Can't I just replace that file rather than go the route of exporting every action folder and importing them individually?
But when I restart photoshop cs3, my old actions don't appear. :(
What do you think? advice please! I don't want to do it the long way if possible....
Liz

So, it's pointless to backup or save the Actions palette.psp file without the .atn files??

Digital Editions doesn't find books on ereader - possibly because Kobo used w/ different Adobe ID

I used my ereader for the first time on a friend's computer. I was just loading a pdf quickly.
Now, even though I have authorized my computer to my own adobe ID, digital editions doesn't find books I purchase from the Kobo online store. This means I can't move them from my ereader to the digital editions program.
How do I get digital editions to find those books? I have never downloaded those books onto any device but my kobo.
Thanks for any advice.

Can I add to this?
SONY has begun to tighten their controls over their ereaders. The first
step was to change the way their Reader Store works, so that it becomes
more difficult to download content to their ereaders from other sources.
Your husband may experience some issues in the near future when he goes to
use ADE to download to his ereader because of this. Technically, when a
SONY ereader is registered with SONY, the process includes downloading a
Reader Library to your PC. When you plug in a SONY ereader, it looks for
this Library and synchronizes with its contents. SONY can interact with
the library via the Internet, and can change what's there, which then gets
transferred to the PRS.
If bad comes to worse, and your husband's PRS starts to act up when
attached to ADE, there are options to get around this issue. C'mon back if
that happens!
============

Editing doesn't bring up PSE13 when requesting it through iPhoto

Similar Messages

Maybe you are looking for