Editing Essbase SAI Error Message
Perhaps a weird question.....
But in 11.1.1.3, is there a way we can edit the Error Message that Spreadsheet Add In returns to the user?
In particular, when a user has more than 65K rows and performs an Essbase function, it will give the user a error that has nothing to do with the #of rows. It is cryptic enough that it might incite panic on some of my users.
"Essbase has encountered an internal Excel error. Your sheet will not be overwritten and none of your data will be lost. However, you are strongly urged to exit Ecel and restart in order to clear up the problem."
After constraining the #of rows, we no longer get the message.
So... we thought that maybe we can add "Limit your rows to less than 65K" to the message.
Any thoughts?
The particular error message the original poster referred to is specific to the Add-In - it isn't raised by the Essbase server or client per se, so I don't think you'll find it in essbase.mdb. Similar to "There are no active connections" (if you click 'Disconnect' in the Add-In without making a connection first), for example.
Similar Messages
-
Editing and cropping error message in photoshop 10. help!!!!
i have elements 10. i have been unable to perform editing and cropping of my picutres due to the following error message:
error message: Your system is low on disk space and elements cannot perform this operation. Try removing some files to free up space
I have done the following
I have deleted pictures from my catalog
I have purchased 20gb space in photoshop
I have checked for any problems with my computer. None found
I have a 6 gb hard drive with 530 gb of free space
I have open edit workspace> selected edit>Preferences>performance and have move the slider to the max setting
What other options would you recomend?
ISorry but I find the following detail inconstent
[email protected] wrote:
I have a 6 gb hard drive with 530 gb of free space
Also if you are on MAC, try cleaning up your trash too -
Edit screen after error message in module pool
Hello Experts,
In our scenario ,we have some checks over inputs given in a table control of module pool screen.Requirement is that after error message we need to display that record of table control in editable mode.
Thanks.Thanks for the reply...The issue was resolved by dispaying information message and using EXIT to stop program flow.
-
Omniportlet SQL: Edit Connection - Receive error message - Cannot store ..
Gurus,
Portal version 10g.
Defining a omniportlet SQL. Click 'Next' button. Default SQL 'select * from emp' is displayed. Click on 'Edit Connection' button and receive the following error message:
Cannot store connection information in the repository because the repository has not been configured. Click Help for more information.
How to fix this problem.
Thanks,
KaushikYou first need to configure the repository for OmniPortlet. For this, access the following URL -
{http/https}://{midtier host:port}/portalTools/omniPortlet/providers/omniPortlet
Click on "configure security repository" link. Access the context-sensitive help for any help on this screen. After that you should be able to use sql query with omniportlet. -
i have restarted my pc closed and opened the program, opened another internet page to check if its connect and its still not working?
Are you sure it is still the same underlying Adobe account that was used when then books were originally accessed, with just the password changed?
In that case, should just have continued working, but ... you are using the world's worst software so anything can happen.
Try deauthorizing the computer and reauthorizing.
~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0 -
Launching adobe digital editions 4.0 - error message "encontered a problem and need to close
Hello,
i've installed ADE for the first time and cannot get it work. WHen I click on the icon I receive a message that it encontered a problem and needs to close. Where can I get advice how to fix it?
Thanks.Hi ynotcookit
Please make sure that antivirus has been disabled...
Check the .net framework installed on the machine and update it, if required
Also, Let us know the exact OS that you're using?
Thanks,
Mandeep -
Ipod touch getting an error message when I try to sync
I am trying to sync my Ipod touch (2nd generation, updated) and it keeps telling me
'Ipod touch cannot be synced. An error occured while reading from the device'. Then it says the required disk cannot be found. I have tried plugging it out and in, etc. An ideas? It's driving me crazy.
Message was edited by: krogbosThat error message usually means you have to delete the iPod Photo Cache folder. See the following:
http://support.apple.com/kb/ts1314 -
Help with Oracle AS Portal Error Messages
Hi
Our Application basically consists of a number of Reports which display data from a database, and Forms which will allow the insert of data in the table that the form is based on...
The application is used by business users.
I need assistance with the error messages that appear on Oracle Portal if something goes wrong - wrong data entered on a form for the database table, some error with a trigger that is called on the table where data is being inserted/ updated etc...
Currently, when an error occurs on the form (when you are trying to insert data into the database), the following errors can appear (this is an example of the actual format.)
Error: Internal error (WWC-00006)
An unexpected error occurred: ORA-20001: aft person ins
ORA-06512: at "RFS.RFS_AFT_INS", line 41
ORA-12899: value too large for column "RFS"."RFS_PERSON"."USER_ID" (actual: 22, maximum: 20)
ORA-04088: error during execution of trigger 'RFS.RFS_AFT_INS' (WWV-16016)
While this error will tell a developer what to do, it will not really tell an end user what the problem is...
I have started to edit the functions/ procedures that are used/ triggered from the forms to display a message in more or less the following format.
RAISE_APPLICATION_ERROR(-20001,'PLEASE NOTE: There is no XXX data for the XXX used. Please contact your administrator to assist.',TRUE);
What I want to know is, by changing the functions on the database etc, will I be catering for the errors, and will the message that I create be displayed to the user, or will they still see the original error message above?
Are there ways to display a more user-friendly error, even if just to say "Contact your administrator..." or something?
Any help will be greatly appreciated.
ThanksBy editing the default error messages, there is a risk the next patch or patch set to overwrite your customizations. A better approach would be to create custom error page(s) for Portal forms/reports.
Please refer to Metalink Note: 157132.1 How to Create a Custom Error Page for Portal Form.
Thanks. -
Your role no longer valid error message and cannot edit page
Unfortunately I don't have access to the file, am asking on
behalf of a
friend who is skittish about his skills navigating a forum.
His question is:
When I open contribute, and select the website I want to
edit..there is a
yellow bar across the top of the screen that says "your role
in this website
is no longer valid. Click connect to update your connection
with a valid
one" so when I click connect, it goes through some screens,
then it asks
what folder on the ftp server the website is in? before there
was this
problem, I could get into the page I wanted to edit, and make
the changes,
then when I would hit the publish button the old page would
show up..so I
could make the changes but they weren't publishing..but at
that point I was
getting no error message???
He's having those two problems.
Any thoughts? I don't know diddly about Contribute. Thanks.
LibbiHi, This is because SSRS requires a Login to connect to the datasource to process the report when subscription will be occuring at its scheduled time. I would recommend you to store the credential securily into report server.
GoTo: Report>Properties> Click on the Data Sources tab and you will see following options:
a)A shared data source
b)A custom data source
Use option b) and click on option Credentials stored securely in the report server
and provide credential information and further you can use options: Windows credentials and Impersonate the authenticated User if you require. Click on apply button.
*You can use any option of them provided in first option(a) also using the shared data source which is having credential saved into report server.
Once you have done with above you will be able to create subscription.
Cheers Sunil Gure -
i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?
It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question" -
Both my iPad and iPhone have ios8
On either device in Calendars> edit >shared with> add person when I enter an email address and press add nothing happens - just goes back to edit screen and what I have entered has gone. No error message or any clue about why I cant share my calendar. Please help.UDPATE:
Spoke with Express lane, and issue was escalated. Kudos to the support guys that handled this one (Brian and Yi). Went through everything in detail and took all the crash dumps off the iphones and ipads to send to engineering.
After backing up the contacts, the recommendation was to delete all contacts in iCloud. Doing that caused my iCloud to crash (in the browser), so more crash dumps were sent to apple.
Eventually got all contacts deleted, then did a resync. Looks like IOS devices are coming back to life and syncing again.
Also, Outlook iCloud connector has just been updated to ver 1.0.1 so i installed that on their recommendation.
BOTTOM LINE workaround:
1. Backup contacts
2. Delete contacts in iCloud
3. Delete accounts on IOS devices
4. Recreate accounts on IOS devices.
Hoping a real root cause can be found and real fix implemented. This has caused me to doubt the stability of iCloud, so i will procees with caution. -
I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?
Try opening Disk Utility in your Applications-Utilities folder and repair permissions.
-
I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?
Solving MSVCR80 issue and Windows iTunes install issues.
-
Help with an error message: This edit cannot be done...
"This edit cannot be done because a transition would be cut or an item to one side of a transition would become too short."
Can someone please help me understand this one? I have a project with self made lower thirds from a .tif graphic on V2 and a text track on V3. Each track has a 15 frame Edge Wipe on both ends. Within the sequence I have no problem either drag copying both tracks together or even copy/pasting them further down the sequence.
The error pops up when I try to copy/paste to a different sequence. Regardless of whether I try to paste it above my video on V1 or past the video's end I still get that error message.
If I delete the transitions, I can copy/paste just fine and re-add them, but it's so frustrating. I really just want to understand what's going on here. Could someone explain this in layman's terms?
Edit: I should also add that if I Option-Click the Toggle Auto Select for track two, I can paste just fine. Which might lead me to believe that it's trying to paste to track V1 where video is already laid down, except that even if I try to paste after the video it still won't work. If I'm copying track V2 and V3, shouldn't paste automatically past to V2 and V3?
Message was edited by: The BundokI had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck! -
Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.
Maybe you are looking for
-
Safari is slooowwww after HD upgrade
I just upgraded my 400mHz Pismo to a 100 Gb Hard drive with a 16 MB cache. It spent a few weeks in an external Firewire enclosure - being partitioned, having Tiger installed and transferring settings, folders, files, etc. I was able to boot from it,
-
I don't HAVE any more details. Whenever I open a new site, I get (so far) one of two full screen advertisements. Most of the time there is the word "Skip" in the upper right hand corner, but on occasion that is not there, and there no way to get beyo
-
How to fetch data from bseg based on 2 internal tables in 1 select query?
hi, i have bukrs and belnr in one internal table and bukrs and vbeln in another internal table..now if i select from bseg twice using for all entries for fields bukrs vbeln and bukrs belnr twice in 2 select statements its fine..but since bseg is a hu
-
I downloadedall the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder
-
When one customize text styles or spacing between paragraphs. How do you apply settings permanently to a document??? Should you create a new template???