Editing fireworks files from dreamweaver

I am using CS3 on an iMac with an Intel core 2 duo processor
and 2GB of RAM. I created a fireworks file which I then imported
into Dreamweaver. The problem starts when I select the table and
click edit to take me back to fireworks. I get the following
warning dialogue in Fireworks: "Please reinstall your software. A
problem was detected with your application. Please reinstall this
software to correct the problem." I have reinstalled Fireworks but
this dialogue is still coming up. Can anyone help me?

First off, it's usually a poor decision to use FW HTML,
unless you know
enough HTML to be able to anticipate and correct the problems
you will
encounter with that FW-generated markup. Of course, if you
know enough HTML
to do that, you would just do it all in DW, which is the
right thing to do
anyhow.
What version of DW and FW are you using?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"fragrantbot" <[email protected]> wrote in
message
news:g1ol1t$dgj$[email protected]..
>I am using CS3 on an iMac with an Intel core 2 duo
processor and 2GB of
>RAM. I
> created a fireworks file which I then imported into
Dreamweaver. The
> problem
> starts when I select the table and click edit to take me
back to
> fireworks. I
> get the following warning dialogue in Fireworks: "Please
reinstall your
> software. A problem was detected with your application.
Please reinstall
> this
> software to correct the problem." I have reinstalled
Fireworks but this
> dialogue is still coming up. Can anyone help me?
>

Similar Messages

  • Can't edit .html file in dreamweaver?

    Why can't I edit .html file in Dreamweaver CS 5.5 when it is not attached to a template?
    I have always been able to edit it every other time I have opened the file (since I built the site over two years ago).
    Now each time I try to edit it in Design mode, no matter where I click in the file the whole page gets a dark grey overlay and I can't get a curser.
    I am still able to edit the code directly but I do not want to be restricted.
    The last thing I did the last time I opened the file was paste Google Analytics code in just before the </head> tag. I did this to all the files on the site but this is the only one that isn't working. I have tried taking out this code but it makes no difference.
    I am using a 6 month old Macbook pro.
    Can anyone help me?

    In your stylesheet you have -
    .container {    overflow:hidden; width: 100%;}
    .container2 {   overflow:hidden; width: 646px; margin:0 0 10px 0}
    Try right clicking on the page in Design view and then selecting Element view > Full and see if that helps.

  • How do I edit Raw files from a Canon 5D using Elements 9?

    How do I edit Raw files from a Canon 5D mark 111 using Elements 9?

    The 5D mk III is supported in PSE 10 with ACR 6.7 update.
    You could download and install the latest DNG converter and use that to convert the CR2 files to DNG files (still RAW format). Then you can edit the DNG files using PSE 9.
    Brian

  • Problem uploading files from Dreamweaver CS3 to Yahoo

    I am having a problem uploading files from Dreamweaver CS3 to
    an FTP site on Yahoo.
    The error message I get is "No response from server.
    Reconnecting..."
    I am able to connect to Yahoo using other FTP clients
    successfully.
    I am able to connect to Yahoo using Dreamweaver MX 2004
    successfully.
    I tried playing with various settings (i.e. passive ftp,
    server compatibility options) but to no avail.
    Any thoughts on this would be appreciated.
    Thank you,
    Steven

    I tried enabling passive FTP but it doesn't help.

  • How do I go about transferring files from Dreamweaver CS4 to Dreamweaver CC?

    How do I go about transferring
    files from Dreamweaver CS4 to Dreamweaver CC?

    If both versions are on the same hard drive, simply tell DW CC where your site files are located on your hard drive.  Go to Site > New Site and define your site.
    Nancy O.

  • Opening Fireworks .png file from Dreamweaver

    Anybody have problems with the connectivity between Fireworks
    and Dreamweaver? I have a Retail version of Macromedia Studio 8.
    I've been designing a new site and noticed that my fireworks .png
    file is not updating from my changes in Dreamweaver (probably
    because I cannot open from the edit button in Dreamweaver.) When I
    try to open the .png file from the Edit button at the bottom of the
    Properties Panel in Dreamweaver it gives me an Error Message :
    Unable to Launch. Please be sure that the application exists and
    that there is enough memory.
    Obviously the only benefit of Macromedia suite is the
    connectivity. Well, since I don't have it it is sucking. Was it a
    misinstallation on my part? Anybody know what's happening here or
    how to fix?
    Thanks,
    JP

    Copy the file off the server, then open it?
    And what version of Photoshop are you using?  On what OS version?
    Most likely this is a bug in the OS or server software that just shows up because of the asynchronous file IO used by Photoshop (to improve performance).

  • Edit .swf file in dreamweaver cs3

    hi frends i am new to adobe flash. I am using dreamweaver to edit a .swf flash file.I selected the flsh in design window then selected the "edit" button.The adobe flash cs3 opened it but i want to edit this flash. Please tell me how to edit it as i am only displayed with the flash in a window. how t edit its components like adding new pics to it or making other changes to it.

    A .swf file can´t be edited with e.g. Flash CS3, because this type of file is the "end product" which is generated when exporting your work from Flash (File -> Export -> Export Movie...)
    What you´ll need instead is the corresponding Flash "source file", which has the file extension .fla -- and this type of file is usually editable from Dreamweaver,
    Cheers,
    Günter

  • Can't edit php files in dreamweaver, access to site root denied

    Can anyone help me please?
    I've recently purchased a Macbook Pro after my PCs failed on me and also had to get a Creative Suite Web Premium. I have always used Dreamweaver to edit my php files. In Windows XP, I had to run the programme to run as an Administrator to edit php files. Now I have not a clue how to do it on Mac! Each time I tried to save a php file, a dialog box appear stating: Access to Macintosh
    HD:Library:Webserver:Documents:Untitled-1.php was denied
    Regards
    Sinead

    You shouldn't have to do that on the Mac or Windows.  Only thing I could find that would suggest loading files from there is a tutorial by David.  And although I would normally agree with him, keeping the files in a system library folder for a testing environment is really unnecessary.  I'd recommend moving them into your /Users/{username}/Sites folder.  There is already a modification to the apache server to recognize that as http://localhost/~{username}.  Or install something like MAMP that is in the Applications folder.

  • Finding original Fireworks .pngs from Dreamweaver?

    I'm taking over another person's work and they built the
    designs in Fireworks. I have an HR page that has photos that get
    updated all the time (lots of turnover I guess) and I'm not really
    a Fireworks guys (use Photoshop) and I've kinda figured out that
    there is a ".mno" (I think that's what it is) file that stores the
    metadata to show where the .gif or .jpg was made from the Fireworks
    .png file.
    I guess my question is, in matters of workflow, how do I
    efficiently set up a .PNG file (from scratch) that saves its slices
    in either .jpg or .gif, with the "here is the path to the original
    .png" flag so when I come back to editing the .html in DW, I can
    see a flag that says "find the original .png on Hard Drive 2"?
    I just did a search on OSX Spotlight for the image file and
    it came up with the same named file as .mno or something like that.
    When I opened that as a text doc, it gave a path, which fortunately
    helped me find the original .png this time, so I didn't need to
    rebuild the image from scratch. I did this through the "back door"
    of using OSX's search function.
    There are times I'm so busy, I need to find stuff fast. How
    do I find original .pngs from .jpg/.gif images made in Fireworks,
    easily?
    How do I set up a good workflow from FW to DW?
    Thanks in advance,
    nick

    > How do I set up a good workflow from FW to DW?
    Export the graphics from FW and place them on the page in DW.
    Don't worry
    about any more than that. Trying to use FW to write your HTML
    gets everyone
    into deep trouble.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "adobeexchangenick" <[email protected]>
    wrote in message
    news:[email protected]...
    > I'm taking over another person's work and they built the
    designs in
    > Fireworks.
    > I have an HR page that has photos that get updated all
    the time (lots of
    > turnover I guess) and I'm not really a Fireworks guys
    (use Photoshop) and
    > I've
    > kinda figured out that there is a ".mno" (I think that's
    what it is) file
    > that
    > stores the metadata to show where the .gif or .jpg was
    made from the
    > Fireworks
    > .png file.
    >
    > I guess my question is, in matters of workflow, how do I
    efficiently set
    > up a
    > .PNG file (from scratch) that saves its slices in either
    .jpg or .gif,
    > with the
    > "here is the path to the original .png" flag so when I
    come back to
    > editing the
    > .html in DW, I can see a flag that says "find the
    original .png on Hard
    > Drive
    > 2"?
    >
    > I just did a search on OSX Spotlight for the image file
    and it came up
    > with
    > the same named file as .mno or something like that. When
    I opened that as
    > a
    > text doc, it gave a path, which fortunately helped me
    find the original
    > .png
    > this time, so I didn't need to rebuild the image from
    scratch. I did this
    > through the "back door" of using OSX's search function.
    >
    > There are times I'm so busy, I need to find stuff fast.
    How do I find
    > original
    > .pngs from .jpg/.gif images made in Fireworks, easily?
    >
    > How do I set up a good workflow from FW to DW?
    >
    > Thanks in advance,
    > nick
    >

  • Editing a file from Itunes library

    Hello,
    I called Apple care about this and they recommended asking here because they don't know how to edit files from I tunes library.
    I have a live talk that was recorded on an MP3 recorder and given to me as a Wav file. I want to edit and cut out a live song on the beginning of the talk before burning copies because the quality is bad. I tried monkeying with this by changing the format to aiff or aac etc and when I try to drag it to garage band it doesn't import it. I also tried exporting it to garage band and it saves it as a text file and it's greyed out and I cannot open it.
    Does anyone know how to accomplish what I am asking??
    Thanks very much

    yes there can be and hopefuly you have it in AAC -- don't have to but recommended. Use iTunes to set the 'start playing time' to the time after the song. When you imported your live talk file into iTunes, find the file and right click it then choose "Get Info". Choose the "Options" tab. In it, you will see a box and the words "Start time" next to it. Check that box and edit the start time that you want. In your case is the time when the song finish playing. Press "OK". Right click on the file again and this time choose "Convert Selection to AAC". A new file is being made which will start after the song just finished played.

  • Does the new firefox work when previewing files from Dreamweaver?

    I use Dreamweaver CS3. I always preview my pages that I build in Firefox. After just downloading the newest firefox version (3.6.10), I could no longer preview files in Dreamweaver. When I go to preview the file, it just opens a firefox the application, not my webpage within firefox. Any ideas? I even edited my browser list within Firefox, removing Firefox as one of my browser options and replacing it again.

    Dreamweaver CS3 doesn't work correctly in any Firefox 3.6 version.
    There is a fix for Dreamweaver, so it works in Firefox 3.6+ versions:
    http://solutions.marketingmedley.com/
    There is a $5.00 fee for that Dreamweaver fix. That website and the fix are not associated with Mozilla in any manner. Support for that fix is provided by that that website via email.

  • How do I edit Photoshop files in Dreamweaver ??

    Environment: Windows 7 Pro 64-bit, 8GB RAM.
    In Dreamweaver CS6, have graphics (.jpg) files in Assets; I double click to edit in PhotoShop and it defaulted to photoshop CS5 and then indicates that it is unable to load.  Unfortunately (?) I have Phototoshop CS6.  So in Dreamweaver I got to Edit > Preferences > FileTypes/Editors, but could not figure out how to relate my PS CS6 (32-bit ... gotta fix that!) to DW CS6 for editing Graphics Files.
    Here is my File Types / Editors options preference screen:
    What should I do?

    While that was helpful, I also figured out how to do it in Dreamweaver.  I suspect that when I posted the original question I was just flustrated and didn't try hard enough.
    Here's how in Dreamweaver:
    Click on Edit in menu, then at bottom click on Preferences.
    Click on "File Types / Editors" in left menu
    For each graphic extension (.png, .gif, ,jpg, etc.) click on the extension (in the left scrolling panel), and then (in the right scrolling panel) click on what you want to get rid of, and above that panel click the [-] button.  The program designation should go away
    Then for each extension, click on the extension in the left scrolling panel and click on the [+] button for the right scrolling panel
    Browse to the program (usually on your "C" drive) and double click it.
    You're done.

  • Premiere Elements 2.0  how can I edit MOV. files from my camcorder

    I have Elements 2.0 and I can't get it to work with the mov. files from my canon digital camcorder.    The picture does not even come in and then I tried to convert the mov. file to mpeg2 and that worked ok but when I moved it to the elements editing software the video played perfect but the sound would not come in at all?  Any help would be greatly appreciated.

    First, MOV is but a "wrapper," and can contain all sorts of "stuff," mostly different CODEC's. This ARTICLE will give you background on what can be inside those "wrappers," plus tell you how to "peek" inside of them.
    For most MOV files, I use Apple's QuickTime Pro (US$29 upgrade/unlock), and choose DV-AVI w/ the DV/DVCPRO CODEC (compression) and 48KHz 16-bit PCM/WAV for the Audio.
    About the only MOV format/CODEC, that I do not have issues with is the Animation CODEC. I use those in PrPro to edit natively, when an artist, or client provides me material from a Mac. I just specify the Animation CODEC, and things work fine. Other MOV CODEC's - well, not so well.
    Good luck,
    Hunt

  • Using files from dreamweaver 8 in CS5 - not working

    Hi All
    I made 2 websites a few years ago in Dreamweaver 8. We now have windows 7 at work so we are trialling CS5.
    Basically, i open up our web files (which were made in Dreamweaver 8) in CS5 and the site ios not being very friendly at all. It is almost like it doesn't recognise the codes and formats properly.
    And to change one line of text - i select and change colour - it changes the whole 3 paragraphs.
    Is Dreamweaver 8 files compatible with CS5.
    Need help
    one website is www.progressivegroup.com.au
    in the old version i could simply make changes with out any bit of hassel, in the new one i can barely do anything with out it going crazy on me!!
    Thanks

    Thank you for your help.
    Are the code errors from Dreamweaver 8?
    I am not the best with this sort of thing.
    How do i fix the errors so i can use the web siles in CS5?
    also, how do i validate the code?
    Thanks again

  • How do I edit nef files from my Nikon D800 in Lightroom four?  thanks

    Hello
    I am new to lightroom.  I just purchased lightroom four and recently purchased a nikon D800.  How do I edit nef files in lightroom four.  I presently get an error message.  Any help would be appreciated
    thanks

    Make sure you are running the latest version LR 4.1.

Maybe you are looking for