Editing for 24p

I have shot an event on 24p settings on Panasonic AG DVX100A camera.
I am doing this for the first time. I would like to know about the settings for digitizing it in FCP5 & Printing it on a Mini Dv tape as well as for burning a DVD.
Thanks.
MANDAR

If indeed you used 24P and NOT 24PA then just use a regular 29.97 sequence.
24P from this camera is used to get a 24fps "Feel" to the image and right now you shouldn't worry about trying to actually get it to 23.98 fps "actual."
Just pretend it's 30fps and edit normally. Printing back to MiniDV AND to DVD will be no problem.
IF you shot in 24pA then write back.
CaptM

Similar Messages

  • Realtime effects become jerky after being rendered for 24p HD video

    Hello,
    Any one comes across that for 24p HD Video clips, e.g. just adding a "cross-dissolve" as the transition between two clips (I have tried both uncompressed and ProRes 422 HQ). Before rendering, the realtime effects (green in color) plays perfectly across. However, after render realtime or render all, we find that there will be once that the video becomes jerkly about at the "out" point of the "cross-dissolve". The same result to the video recorded when "print-to-video" or "edit-to-tape".
    The only work-around is to either export the whole sequence to a quicktime movie, OR adding a dummy "Quicktime" effect filter into the both video clips and render all effects. Both methods are very time consuming, as it is video footage
    Also, this problem seems happen to 24p only, not 50i or 60i. I wonder there is any error in calculating and making the render file of the effect for 24p.
    Software configuration:
    10.4.10, Final Cut Pro 6.0.1, Quicktime (most updated), KONA3 driver 4.0 (actually this problem happens to BMD MultiBridge/DeckLink Systems too)
    Is it a "known" bug in FCP? or anyone get similar problem but have a solution to it?
    Thanks.
    Regards,
    Golden

    Hmmm....odd. I only saw this with P2 footage that was imported with FCP 5.0.4 and used in projects since upgraded to FCP 5.1. That little jitter at the end. I had that. I had to reimport all my footage under FCP 5.1.1 and it went away.
    But that is NOT what you are dealing with...same issue, different footage, different version of FCP.
    Got me.

  • Capturing OfflineRT for 24p Advanced?

    Hey guys,
    I've been searching the forum for an answer, but I haven't been able to find anything too clear. I've decided to edit a feature I'm current working on with OfflineRT due to the 100's of hours already shot/still to be shot for the project. Director wants access to everything. But since it's low budget, we definitely don't have the space to have any of it on-line. Can somebody recommend what settings are necessary to capture and edit 24pa anamorphic footage (we want to output to film eventually) using OfflineRT on FCP5?
    Thanks!!

    No, it's not working for me. And I'm certain it is user error. For one thing, in order to capture with the pulldown being removed, do you absolutely have to use the source camera? Because we have it attached to a regular DV deck and it's absolutely refusing to check that part of the preset. Second, the capture preset for OfflineRT NTSC 24p (23.98) is GENERIC CAPTURE TEMPLATE.... with no real sign of anything for 24p. It's really frustrating that this isn't as simple as it could be. At this point, I don't really care about it being anamorphic... but I'd like to get the darn thing actually capturing at 24fps (23.98... or something!) Ugh!

  • Best way?  Edited HDV1080 24p to HDV108060i

    Hello All,
    I've done a search and really don't think I've found my answer. I have an edited HDV1080 24p sequence. It's and intro piece and we wanted the more filmic look. I now need to use this sequence in an HDV1080 60i sequence.
    What is the best way to handle this? Currently I am using compressor to output the file to Apple ProRes format and will then add that to the 1080 60i sequence.
    Which I am sure is the wrong way to do this. Thus I find myself here looking for advice. I am just learning FCP so go easy on me...
    Thanks,
    Scott

    Jim, your comment about you wish mfgs would not include 60 progessive is interesting. So, question, I have no desire to have my final/only output to be BR.
    I see AVCHD coming, which does support 1080p/59.94 fps.  I also see Youtube allows me to now upload a 20 gig file, so I plan on uploading a
    H264 10809/59.94 file.  Not sure if it will make the output better. But to imply one should never shoot in 60 progressive at 1080 because no future format can use the quality is?  I am already loading all of my 10 plus thousand, 100gig plus pictures up into the Flickr cloud.  I am thinking of now trying to do the same with all of my video with Youtube cloud since my account no longer has a time limit, and the 20gig is amazing.  By getting off of my pictures and video in the cloud, I will be set to watch it at anytime from anywhere.

  • Oracle8 Enterprise Edition for Windows 8.0.6

    I’m a naïve user in Oracle and would like to know the following details from the Gurus.
    Any information in this regard will be highly appreciated !
    We are trying to use Oracle8 Enterprise Edition for Windows 8.0.6 for some specific reason.
    Some general doubts regarding the installation.
    1.     Is any installation specific to the OS language (English/Japanese) ?
    2.     Say, if I get an installation for Windows, would I be able to use the same for a Japanese Windows version?
    3.     During the installation, choose the default language as Japanese?
    Also, if we would need to install Oracle8 Enterprise Edition for Windows 8.0.6 in a Japanese OS, what should we do?
    Can we procure a license for the same? Oracle8 Enterprise Edition for Windows 8.0.6
    Can we get the media?
    Please advice. Many thanks in advance.

    The best way to arrange this is to contact Oracle sales and talk very nice to them.
    You are asking to have someone provide you with a piece of software that was very full of bugs and made obsolete before year 2000. Oracle will probably not be very happy to do that.
    Besides, Oracle is so upward compatible that - unless you depend on the bugs - you should be able to use any currently supported version. Such as Oracle9i or Oracle10g.

  • Oracle8 Enterprise Edition for Windows 8.0.6 - Info reqd.  Pls help !

    I’m a naïve user in Oracle and would like to know the following details from the Gurus.
    Any information in this regard will be highly appreciated !
    We are trying to use Oracle8 Enterprise Edition for Windows 8.0.6 for some specific reason.
    Some general doubts regarding the installation.
    1. Is any installation specific to the OS language (English/Japanese) ?
    2. Say, if I get an installation for Windows, would I be able to use the same for a Japanese Windows version?
    3. During the installation, choose the default language as Japanese?
    Also, if we would need to install Oracle8 Enterprise Edition for Windows 8.0.6 in a Japanese OS, what should we do?
    Can we procure a license for the same? Oracle8 Enterprise Edition for Windows 8.0.6
    Can we get the media?
    Please advice. Many thanks in advance.

    The best way to arrange this is to contact Oracle sales and talk very nice to them.
    You are asking to have someone provide you with a piece of software that was very full of bugs and made obsolete before year 2000. Oracle will probably not be very happy to do that.
    Besides, Oracle is so upward compatible that - unless you depend on the bugs - you should be able to use any currently supported version. Such as Oracle9i or Oracle10g.

  • I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

    In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

    Here is a copy of the error
    This means : Installation failed.
    Verification of the Adobe Software failed
    The product you want to install is no valid Adobe product and seems to be falsified.
    HUgo
    Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
    I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Hugo please turn off your e-mail signature.
    If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files.  You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    To download a fresh copy of the installation files please see Download CS6 products.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit??

    I can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit. After filling out the form with the questions...I click on the actual link, but the box never pops up. The status bar on my Internet Explorer slowly increases, but never allows me to download. It just hangs. I have tried multiple times, and I can download other verions from your site...and have many times in the past. Could you please fix this. Thanks.

    I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
    OTN

  • How to use BI in netweaver  2004(trial edition for abap)?

    I am new in BI field. I downloaded the netweaver 2004(trial edition for abap)and installed it on my laptop. But the system said I am not authorized to use BI function:(
    how can I use it, thank you

    Hi Phani,
    You can test your TREX server by executing the following step:
    Log on to your TREX server and open up the TREX console which you can find in the TREX program folder. Normally you are now inside the python_support folder.
    Execute the following script by typing: "python runInstallationText.py" and hit Enter.
    The script carries out the following tests:
    &#9679; Deleting any test indexes that were generated for a previous script run
    &#9679; Creating a test index
    &#9679; Indexing documents
    &#9679; Testing search functions
    &#9679; Exact, error-tolerant (fuzzy), and linguistic searches
    &#9679; Search using Boolean operators such as AND and OR
    The results are displayed at the end of the script run. You see the tested calls and their statuses (OK or Failed).
    When you run the script for the first time, the call “Delete Index” has the status Failed. This is because there was no existing text index to be deleted. If this is the only cell with the status Failed, the test was successful.
    Below you will see the final output generated by the test script. As stated near the bottom of this screenshot our TREX is running very well or not if there is a problem.
    Best regards,
    Tom.
    PS. Don't forget to reward helpfull answers

  • Re-installing Photoshop CS5 Extended Student and Teacher Edition (for Mac)?

    How can I download and re-install Photoshop CS5 Extended Student and Teacher Edition (for Mac) for which I have a licence?  I lost the previous version in a disk crash.  I tried downloading the full Photoshop CS5 installer, but I was told I couldn't run the installer because I didn't have permission. 
    Thanks,
    Rodney

    Here is the link for the  CS5 installers: Download CS5 products
    Be sure to right click and run the installer as an administrator if you have trouble. If it still fails, download the installer again.
    Benjamin

  • Tax Cide Field as editable for Automatically created Line Item

    Hi
    How can we make the tax code editable for automatically created line item, when an FI Document is simulated.
    Thanks & Regards
    Sanil K Bhandari

    Hi
    I want to edit the line item which has been created by the system, when the document is in simulation mode. The entry has not been posted yet.
    Thanks & Regards
    Sanil K Bhandari

  • Alternative to a Named Sets in Microsoft Cube for Analysis Edition for OLAP

    SAP has told me via there support system that they do not support Named Sets in Microsoft Analysis cubes and I need to be able to create specific time parameters to ease reporting requirements.  We are migrating off ProClarity and onto Analysis Edition for OLAP and need to be able to create these specific time dimensions.  I don't want to use custom groups as this would be hardcoding the values for the dates.  Is there any alternative to have these dates available in the Analysis application?  Any help would be greatly appreciated. 
    Please note that the Business Layer on the Webi side supports named sets and I have already implemented this for scheduled reports. Below is the MDX Name Set query for the Previous month based on our time dimension.
    ---- [Previous Month] ----
    Intersect ([Time].[Time Fiscal Year].[Month].Members, LastPeriods (1, Tail(Filter([Time].[Time Fiscal Year].[Month].Members, NOT IsEmpty(([Time].[Time Fiscal Year].CurrentMember, [Measures].DefaultMember))), 1).item(0).Lag(1)))
    Our Current Version:
    SAP Business Objects BI Platform 4.1 Support Pack 2 Patch 2

    When connecting to SSAS in a cluster, you do not specify an instance name.  In your case, you would use the name of the SSAS IP address to connect.
    See:
    http://msdn.microsoft.com/en-us/library/dn141153.aspx
    For servers deployed in a failover cluster, connect using the network name of the SSAS cluster. This name is specified during SQL Server setup, as
    SQL Server Network Name. Note that if you installed SSAS as a named instance onto a Windows Server Failover Cluster (WSFC), you never add the instance name on the connection. This practice is unique to SSAS; in contrast, a named
    instance of a clustered relational database engine does include the instance name. For example, if you installed both SSAS and the database engine as named instance (Contoso-Accounting) with a SQL Server Network Name of SQL-CLU, you would connect to SSAS using
    "SQL-CLU" and to the database engine as "SQL-CLU\Contoso-Accounting". See
    How to Cluster SQL Server Analysis Services for more information and examples.

  • Can a signed pdf be edited for changes? & How can a pdf be signed if is protected?

    Can a pdf be edited for changes after signing with ADC "sign" feature? How can you protect a pdf that only needs signature from being edited for changes?

    Hi Ravi,
    Here are few links for the Combo box components. It has the multiple select combo box with "All" functionality.
    http://www.visualbis.com/products/multi-select-combo-box/
    These components  cant be downloaded directly.
    If you want the components mentioned in the above link, you can contact :[email protected]
    Thanks,
    P.Gowri

  • Item category editable for components in task list

    Hi all,
    I need help to put the item category editable for components in task list.
    Currently it comes as "L" and the field is non editable. Do you have any ideas or solutions? I already tried SPRO but didn't find anything useful.
    Thanks in advance,
    MB

    Thanks Maheswaran,
    So if it isn't possible to make it editable, how can I change the category to 'N'?
    Does that configuration depend on the company? Because I want the item category to be 'N' for just some companies.
    Thanks
    MB

  • Oracle 10g Express Edition for Oracle Enterprise Linux

    Hi All,
    Can I install Oracle 10g Express Edition for Oracle Enterprise Linux?
    And which for? Enterprise Linux Release 5 or 4?
    Thanks.
    Attila

    It's certified with Enterprise Linux 4.
    Werner

Maybe you are looking for