Editing icloud pages document on desktop, edits not showing up on icloud

I have a pages document on my icloud called "ABC123"
I am on my mac
I go to FINDER > iCLOUD > PAGES FOLDER
in the pages folder I see the document "ABC123"
I click ABC123
It opens in pages on my desktop (not in browser)
I make an edit and type: "***?"
I click save.
When I open ABC123 in the browser-version of pages, my "***?" edit is not there.
Why are my edits not syncing with the icloud version even though I opened it through my icloud folder? Everything is updated (software and pages and icloud acct).... can we just not use the desktop version to edit icloud documents?
In other words:
I ask because I'd like to collaborate with others, but I would like to use my desktop version. They can use the browser to edit. but.... my desktop edits aren't saving to the collaborative online version of ABC123

Hello anonAnthony, 
Thanks for visiting Apple Support Communities. 
Yes, Pages and iCloud Drive can be used in the way you're describing. It sounds like you're seeing some unexpected behavior with this feature. 
For troubleshooting, start with the tips in the "Documents on iCloud.com are not updated when changes are made on my iOS device or Mac" section of this article:
iCloud: Troubleshooting Documents in the Cloud - Apple Support
You may also want to close and re-open Pages and Safari, and test again. 
If the steps above don't solve it, the article I mentioned recommends contacting iCloud Support for more help:
If you still need help, contact iCloud Support.
Best Regards,
Jeremy 

Similar Messages

  • I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    Hi, I'm helping StringSinger2 with this problem.
    The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
    That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
    SO...
    When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
    Many Thanks!

  • I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
    if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue.

  • HT4689 My desktops are not showing up in mission control

    When I use mission control my desktops do not show up, however they are there (just invisible) because if I hover over where they should be and click I am taken to that desktop.

    Hi Jeff,
    Exactly - I do not see them under my account. I have already deleted history, cookies, etc., had my password reset 2x and tried 2 other browsers. I have all my serial numbers that I've saved at home.
    The problem is that I do not see any of my products beyond 2012. I only see a few under orders. I don't see any that should be registered.
    I'd attaching a couple of screenshots so you can see what I see (serial #s and personal info covered up with gray boxes). I should be able to, right? I used to  be able to. This happened 2 years ago as well and finally someone fixed it. Obviously there should be a lot more listed.

  • Rendered html pages in results file(html) not showing the images of origina

    hi,
    rendered html pages in results file(html) not showing the images of original page
    when i click on rendered html pages of different html section of a results file.
    both master and tested as well.
    thx
    pasumarthi

    By design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
    The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
    Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
    Regards,
    Zuriel

  • Why are my desktop files not showing on the desktop

    Why are the files in my desktop folder not showing on my desktop?

    An add-on can put its icon on the bar automatically if it likes, but some add-ons do one of the following:
    * Add an item to the Tools menu
    * Add an item to the right-click menu (depending on the context)
    * Put a button in the button palette so you can add it to a toolbar if you like (''to call up the button palette, use'' View > Toolbars > Customize ''or right-click a blank area after the address box on the Navigation Toolbar and choose Customize from the pop-up menu'')
    Also, you might want to double-check that the add-on is enabled.
    Tools > Add-ons > Extensions
    If you have the orange Firefox button, it's Firefox > Add-ons > Extensions
    Does that help? (If you have problems with a particular extension, you could mention which one it is for more specific comments.)

  • Time machine icon does not rotate and back up icon on desktop does not show during backup session.

    Time machine icon does not rotate and back up icon on desktop does not show during backup session since I installed Maverick.  Why? How do I fix it?

    That's the new look of it. No way to change it other than file a complaint with Apple. If ENOUGH people do thst they may "fix it".
    http://www.apple.com/feedback/macosx.html

  • Do anyone know why the desktops do not show? Is this a bug?

    Do anyone know why the desktops do not show?

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • IOS Pages, Numbers and Keynote do not show my iCloud Documents

    Well, I have and iMac, a MBP and a 3rd gen. iPad. I set up my iCloud account many months ago and everything was fine until I updated my iPad to iOS 6.
    Now, neither Pages, Keynote nor Number show my iCloud documents, although they do appear in mi iMac and MPB.
    I have turned off and on the "Documents and data" option in the iPad's iCloud settings and the "Use iCloud" in the Pages', Numbers' and Keynote settings.
    The strangest thing is this: When I go to Settings - iCloud - Storage, I can see all my documents, but they would never show up in the application.
    Yes, I know, I could use Dropbox, but come on Apple!!! This is why I use this apps.

    Well, I have and iMac, a MBP and a 3rd gen. iPad. I set up my iCloud account many months ago and everything was fine until I updated my iPad to iOS 6.
    Now, neither Pages, Keynote nor Number show my iCloud documents, although they do appear in mi iMac and MPB.
    I have turned off and on the "Documents and data" option in the iPad's iCloud settings and the "Use iCloud" in the Pages', Numbers' and Keynote settings.
    The strangest thing is this: When I go to Settings - iCloud - Storage, I can see all my documents, but they would never show up in the application.
    Yes, I know, I could use Dropbox, but come on Apple!!! This is why I use this apps.

  • Photo edits not showing up in iPhoto when using PSE

    I have recently purchased Photoshop Elements 13 and have set iPhoto to use it as my editor. That is working, however, when I save the file, the new file does not show up in iPhoto. It does, however, show up in Organizer. Is there any way to fix this?

    Thanks Larry, I don't doubt that I'm not doing it correctly, but I don't know what I am doing wrong.  I have selected PSE to be my external editor in the iPhoto preferences and when I select a photo in iPhoto to edit, it comes up in PSE. I edit the photo and select save (or click on the X in the top right corner of the image, I have tried both and gotten the same results both ways. I get a dialog box that indicates PSE is going to save the file in psd format. I have let it do that and I have also changed to JPG, neither has made any difference. I have also gone in and changed the preferences in PSE to replace the original file on the advice of help at Elements Village. It didn't change the file in iPhoto before that change and it hasn't changed it after that change either.
    The file I originally was working with was in RAW format, and I read in another thread that there was no way for PSE to save the edited RAW file back into iPhoto directly, that it would need to be saved somewhere else, such as to the desktop, and then imported back into iPhoto. So, I edited a jpg file and saved it and that edited file did not show up in iPhoto either. From reading other threads, it seems to work for other people, but I don't know what I and doing wrong or what else to try. I have spent a ton of time trying to get this to work because I don't care for the PS Organizer and would prefer to use iPhoto to organize my photos and PSE and ACR to edit them, but so far I am not having any luck with it other than saving the edited file somewhere else and then importing it again into iPhoto, which is a pretty clunky way to have to do it.

  • HDR merge edit not showing correct

    When I try to merge for HDR the edit page does not show correctly. There is big white gap in the merge.
    I am using mac book pro retina and photoshop CC 14.1.2

    I have exactly the same problem with exactly the some configuration, yet I can find no help to solve it.

  • Pages document saved as doc not readable by word

    Hi all,
    Lately I'm having trouble exporting my Pages documents to Microsoft Word format. I've tried the "Export" option directly available in the File menu, as well as the "Save as a copy" option in the Save dialog box. De document is correctly saved as .doc file and Pages can open, read and modify it, but I'm unable to open the exported document in Microsoft Word on my Windows PC. LibreOffice on my Linux PC does open the file, but doesn't show any of the content. Only some strange symbols are shown.
    I'm running Mac OSX Mountain Lion with Pages downloaded from the App Store, so everything is up to date.
    Does anyone have the same problem or know how to solve it?
    Thanks in advance!

    Since it's obviously not a Pages plist issue, I think more drastic measures are called for.
    The simplest would be to run the Mountain Lion 10.8.3 combo updater. In systems past, running the combo updater, even if it had been used before, can clear up some system odditites. It may work, but I think the problem is with Pages. Again, the simplest approach would be to delete Pages & reinstall it and run Software Update. I know you should get the most recent version from the Mac App Store, but this has helped others in the past.  The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easist way to delete iWork '09 is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

  • Photoshop CS5 edits not showing in Lightroom

    Experiencing strange behavior and would appreciate any advice...
    Am editing .CR2 files, then doing Edit in > Photoshop CS5 > Edit with Lightroom Adjustments and "Stack with Original".  All goes fine until I save and the new image is now displayed in LR.  If I want to do a subsequent edit to the now-stacked .psd file, using Edit in > Photoshop CS5 > Edit Original, then saving, those edits are not showing up in Lightroom.  Strangest is that if I then do Edit in > Photoshop CS5 > Edit Original to the file again, my edits are there in Photoshop.
    I think this is an issue with Lightroom updating / syncing its preview (I'm looking at these in both Grid and Loupe) so that I can't see the latest version of what I edited.  Also, sometimes I can get it to update by changing zoom levels and having LR go back to re-recreate the preview (I assume).  I have also seen this behavior (it's more obvious in this case) when doing B&W conversions and the preview keeps flipping back and forth from color to B&W.
    I assume this is a bug, but is there any way to force the previews to update as a workaround?  Don't really use the print module, but changes also appear to not be reflected in the Web module, so concerned about what my output will look like.
    Thanks.

    Well, just found one solution...   Library > Previews > Discard 1:1 previews and then zooming in on each photo in the Library (Loupe) forced the update.  This needs to get fixed!!

  • Page document with audio file not sent by email

    Hello and blessed Christmas to everybody.
    Here is my problem.
    I created a pages documents with images and an audio file from iTunes inside.
    Sharing it by Mail, (and converting it in PDF so that anybody without pages be able to open it) I see that the audio file is not present or not playing inside my mail.
    Is this because of the conversion in PDF?
    But I'm afraid of PC user not being able to see it if I let it in Pages.
    Thanks for your tips.
    Cathy

    Of course! I must have been inattentive.      AsI don't have Adobe acrobat pro I sent everything in word and pages.
    Thanks

  • Newbie question: Edits not showing up in execution

    I'm doing some long distance tutoring for a friend. She's a beginner and is just learning Java and is using an IDE for the first time. I'm an experienced CP/M/DOS/Windows programmer and I've used IDEs before. But I've only just installed Sun ONE 3 aka Forte for Java CE, so I'm not intimately familiar with this particular IDE.
    This is a very simple one-file, one-function toy program that she's writing for an assignment at school. We have a situation where when she edits the file and executes it, the changes are not showing up. We've tried putting in simple "we made it here" output at the beginning of the routine and it never shows up. If her code has syntax errors then the compiler does display an appropriate message, so it is being compiled. It's just never executed.
    She sent me her source file and it's working fine here.
    Again, this is long distance, so I haven't been able to search around in her IDE to try to figure out what's different between her environment and mine. And I haven't been able to duplicate the symptoms here. My suspicion is that we have a setting in the project that's running a different compiled module than we just edited. But I don't know where to look to find out if that's what it is.
    Anyone have any ideas? Can anyone give me some suggestions to try to track this down? Or maybe some pointers to the appropriate sections of the documentation that might apply to a situation like this?
    Thanks,
    Drake

    She's definitely picking up a different class file. Is she compiling to a different directory than the source directory? If so, turn this off, close the IDE, and clean up all classes in the source and destination directories.
    Also, check and make sure that she doesn't have the same source file mounted under two different filesystems. For example, don't mount directories like this:
    c:\myproject
    c:\myproject\src
    This is a general issue and should be avoided--it can cause duplicate entries for the same physical file.
    If all else fails, have her delete her user directory, and be sure that all class files have been deleted from your source directory. The location of the user directory can be found in the Help > About dialog.
    I wish I could offer more specific assistance.
    Todd

Maybe you are looking for