Editing issue with DVCpro 50, blak lines right and left
Hello to everyone, I am editing in native DVCpro 50. In the canvas I get a thin black line left and right, so the footgae is not completely covering the canvas view. Should I resize the footgae a little bit to match this?
My problem is that I am bringing pictures to the project so I dont know if I should adjust them to the cambas or to the slightlt smaller fame of the footage, this would be a hard work to make everything equal
Thanks for your help
If this is for TV, the lines will be outside the safe action area anyway, so they will not be seen.
You will see them on a computer though.
If you really need to zoom in slightly, do it when your edit is locked to one clip.
Right click that clip in the timeline and copy it.
Highlight all the other clips, right click and go to Paste Attributes then select Basic Motion.
That will change all the others to match.
Similar Messages
-
320x240 QT export produces black bars on right and left
Ok, this one is strange. So far, it only appears to affect 320x240 targets from sources that don't have square pixels. Starting with a 720x480 DV movie (even if I change the properties to display 640x480), I export directly to 320x240 and I get a movie with black bars down the right and left. I did not tell QT to letterbox or scale, although telling it to scale does no help.
The problem seems to be in the meta data. If I go to the movie's visual properties and change the move dimensions to 324x240 (with preserve aspect ratio unchecked), then the black bars disappear. When I change it back to 320x240, they are still gone and the movie plays fine. I save it and reopen it, and the black bars are back! The same thing happens exporting from Final Cut Pro using Quicktime conversion. This is definitely a bug.
The work around is to export to another 4:3 format with square pixels first and export that to 320x240.
On a related note, the same thing happens when I record a movie in Quicktime at 320x240. I get a recording with black bars down the sides.
This has never happened to me before. I'm a professional QT software developer and a content producer. I've been using Quicktime Pro for a decade, at least. I've been over all of the export settings, and I've deleted all of my Quicktime preference files.
Is there a way to report a bug to Apple?Regarding: "there's a pretty good chance that your playback target isn't Quicktime Player"...
My assumption is that if your material is 320x240, it's probably that size because you're planning to either display it on a small-screen device, send it to a TV set, embed it in a presentation, or deliver it via the Web. In any of those cases, your final delivery target isn't QuickTime Player, but rather some other mode, such as the QuickTime web plug-in, iPod, AppleTV, or even some other option. In which case the strangeness with the player doesn't seem so strange.
As a workaround, you could layer your 320x240 movie with at 350x240 grey rectangle on the layer behind. That would fix it in QuickTime Player, but it would cause grey bars on either side if you embed into a web page or something like that. -
I HAVE AN ISSUE WITH THE BATTRY PAR UP RIGHT SIDE OF MY BOOKPRO
I HAVE AN ISSUE WITH THE BATTRY PAR UP RIGHT SID OF MONITOR, WHEN EVER ITS FULL CHARGED ITS SHOWING ME SOME TIMES IT WILL SERVE ME LIKE 5 HOURS AND SOME MOST OF THE TIMES ONLY 2- HOURS IF I DO RESTART MY LABTOP SEVERAL TIMES ITS SOLVED PLEASE HELP .ITS ANNOUING ME SO MUSH ,
I DID MAKE TWO TIMES THE REPAIR OF HARDISK AND THE PARMESSION BUT THE PROBLEM STILL STANDING
PLEASE HELPYou should repost your question in the "Macbook Pro Forum" since it appears to be a hardware problem.
Hope this helps -
How do I share / unlink the right and left channel, so I can work with them individually ?
I use "Adobe Sound Booster CS5"
I have a stereo soundtrack, which I only want to remove noise in only one channel (right).
How do I share / unlink the right and left channel, so I can work with them individually ?When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
The above is some background info. To your current situation, you can use a workaround like:
* Export your audio file to separate channels by File > Export > Channels to mono files.
You will get 2 files with _L and _R suffix.
You can then edit them separately. You can go from Mono to Stereo by the following step.
Or
* Choose - Edit > Insert > Channels into New Multitrack file.
That will separate the Left and Right Channels and add them to a new multitrack file.
You can then click the Edit link at the top right of the channel to edit it.
You can then save that file as a new audio file.
Dean -
Hi all,
Please help, I repaired an iphone 5c and have now tried two different lcd screens on it but all I get is a black screen or a black screen with a vertical blue line on the left hand side of the screen. I definitely have the cables connected properly etc and before I repaired it the phone had a cracked screen and there was a picture on it.
I have tried hard reset and nothing. I have tried connecting to iTunes but it asks me to confirm on the iPhone which I can't do as there is nothing on the display. I have tried randomly pressing all over the screen but it doesn't work. So I can't even try restoring it on iTunes.
Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
Thanks.purplesunshine3 wrote:
Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
Thanks.
Since you were successful the last two times, I'm sure you will figure it out. -
Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4
Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"
Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel -
How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?
Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed? -
I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion
Hi Seattle
From Adobe site only!
flashplayer11_b1_install_mac_071311.dmg
Works fine.
Cheers Tomi -
Only right and left channels work with external sound card
Just got the USB Sound blaster xfi surround 5.. connected it to my laptop and connected to my home theather in a box using optical connection.
downloaded and installed latest software but when I do a channel check I only get sound out of the right and left and even then it does not sound right.
I have verified that my home theater in the box will play 5. with optical input and have verified with the built in test tones of the home theater that all speakers are working and correctly hooked up.
The laptop is ruiing windows xp 3.
Any suggestions.
Thank you.Which S&V vi's do you mean to be dedicated to NI hardware?
A quick peek into the addon show me waveforms as input and the sound vis have a waveform output.
OK I didn't look at the examples and by habbit ignore the express vis . But maybe you just want to use a program instead of programming your application?
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ' -
URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.
Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
CarlosHi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos -
Solution: iPad/iPhone Login issues with IIS as Reverse Proxy (Android and Windows Phone works)
Hi,
I had issues with iPad/iPhone access from external and tried a lot. Now I found my solution I like to share.
I setup a IIS on Windows Server 2012 with ARR 2.5 and Android and Windows Phone could login but not iPad and iPhone.
The IIS Log on the reverse proxy showed:
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=1996c8d7-09d0-4310-8da4-a8dfb7940e28 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 401 0 0 124
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 502 3 12018 93
First Request gets a 401 while anonymous. Second try would be with authentication but it never reached the internal front end server.
After I installed a fix for ARR
http://forums.iis.net/t/1195560.aspx/1?ARR+502+3+Bad+Gateway+0x80072ef2+2147954418+The+supplied+handle+is+the+wrong+type+for+the+requested+operation the Apple Devices could login.Hi,
This resolved our problem too!! So happy after 2 weeks of messing around with just about every setting recommended from all types of forums and rebuilding our reverse proxy I was at a loose end.
Our environment is Lync 2013 Enterprise, Lync 2013 Edge, IIS as Reverse Proxy on Server 2012 using ARR 2.5
We had Android and Windows clients working but no iOS devices at all. In the iOS log we were seeing
<h1>Server Error</h1></div><div id="content"> <div class="content-container"><fieldset> <h2>502 - Web server received an invalid response while acting as a gateway or proxy server.</h2> <h3>There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.</h3> </fieldset></div></div></body></html>
When the client was trying to retrieve from the webticketservice.svc
2013-04-11 17:19:44.659 Lync[4970:6c61000] INFO TRANSPORT TransportUtilityFunctions.cpp/907:<ReceivedResponse>
POST https://lyncwebext.contoso.com/webticket/webticketservice.svc
Request Id: 0x72cfc18
HttpHeader:Content-Length 1477
HttpHeader:Content-Type text/html
HttpHeader:Date Thu, 11 Apr 2013 16:22:25 GMT
HttpHeader:Server Microsoft-IIS/8.0
HttpHeader:StatusCode 502
Installed the HotFix from here:-
Hotfix for Microsoft Application Request Routing Version 2.5 for IIS7 (KB 2732764) (x64)
Rebooted the Reverse Proxy and iOS clients worked straight away for both Lync 2010 and Lync 2013 on both iPhone 5 and iPad both.
I hope this helps others as I was losing the plot :-)
Cheers
Sam -
We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?
What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay -
Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]
Maybe you are looking for
-
Dynamic JMS Header Property in Multimapping
Hi All, This is IDOC - File Scnario.The requirement is it to 1 .Spilt the input payload based on a patricular field(for eg:company code) and send it as a separate message. Solution :This functionality is achieved by using multimapping 2 .To set
-
Where do deleted bookmark folders go and can they be recovered?
Does anyone know where deleted bookmark folders go? I accidently deleted one while editing, and cannot find it in the trash bin.
-
How to create a Tree Table In ADF
Hi i,m using Jdev 11 g R1 i want to create a Tree table in my application. is any body have sample codes plz help me..
-
SAPNW7.01ABAPTrial installation problems
I've followed the steps explained in installations.html to the letter, but unfortunately the installation was unsuccesful. The logs showed a bunch of java exceptions that didn't make sense to me. So i decided to try again. And this is where the real
-
Conversion of sap to webdynpro
Dear All, My requirement is that i want to convert a code which i have already made in abap, to give a look and feel like web,using webdynpro.Is thid possible and please do also tell me the way out. Thanking you in advance, nisha.