Editing messages after the hour is up.

I have noticed that sometimes way after the hour time frame has gone I can edit or remove messages sometimes this doesn't happen all the time but it seems to happen if the person doesn't seem to have read it yet.
I sent a message earlier today but can still edit it or remove it even though several hours have passed but with earlier messages in the day I can't though I do not think the person has read the message that I can edit.
Just wondering if anyone knows why this could be happening , I have only ever seen old messages on this topic and they all say you can't edit after an hour so I am confused.
I have the new version of skype that can send offline messaging

I bet that didn't continue.
What I'm seeing today is the opposite: instead of the usual hour, it changes to other lesser times. An hour ago, it was 15 minutes. Then it became 30 minutes. Now it's up to 45.
What gives? I hope it's not in the process of being lowered to 15 minutes for all. A friend still has 60 right now. Same Skype version.

Similar Messages

Mac Mail deletes messages after 24 hours

Mac Mail started deleting my messages after 24 hours 6 days ago. I believe this is a OSX Lion issue as I run 10.8.2 on my main machine (iMac 27 Dec 2010) but I also have an old iMac G5 (2005) running OS X 10.5.8, and on ths machine my messages are not deleted. An additional problem is that new messages to all accounts remain marked as unread for less than an hour on the new machine but remained marked unread until they are read on the old machine. My sent messages are not deleted.
I use a private email address from my own domain for all of my emails, except for a very few on BTinternet and Yahoo adresses. My webmail for my domain also is having emails deleted after 24 hours. I have spoken to the domain host customer care (very helpful) but they cannot spot the issue. And as it doesn't happen with OS X 10.5.8 it seems to me that it cannot be either the host or my current provider BT. However, I have only switched to BT recently and this deletion problem only started once their service was fully up and operating ( which was a long and messy process leaving me utterly disenchanted with BT).
I also have an iPhone 4S using iOS6 which doesn't delete but also doesn't show new messages as unread on my private domain address. On the iPhone new messages to my BT and Yahoo accounts show as unread.
I have time machine running with an external hard drive so I can see old messages there but thats a laborious procedure and the whole thing is doing my head in. Anyone got any explanations or, better still, solutions.

Tim Cutting wrote:
Thanks for a very quick reply - and this is how this mailbox is set up.
I have also had a bit of help and advice from a knowlegable friend and he thinks the source of the deletions may be that the account is an IMAP account on the new machine and my iphone but a POP3 accont on my old machine. I have turned off the old machine to see if this changes the behaviours on the other machines.
This is a very good start.

How to disable the edit Permission after the task approval in project server 2010.

Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.

Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

TS3406 I have an iPhone 5 c, iOS7 op. system. I have left a vouice message, but after the part of my vm mail ending "please leave your message after the tone", I do not hear a tone. How do I set a tone so that s.o can then leave a message after this? T

I have an iPhone 5C, w/iOS7 op. system. I have left a voice message, ending with "please leave your message after the tone". However, I do not hear a tone; how do I set up my phone answering system so that a tone is heard after my message? Thanks!
Don in KS

[url="http://web6.streamhoster.com/em2253/ZEN/ZenDeviceManager.wmv]See Movie[/url]?Hi, take a look at the movie... hopefully I answer to your question is there. [b]Let me know if you can NOT see it... [/b]and I will send you a picture. [color="#ff0000"]and if you can see the movie, give me feedback on it. Did it look ok in your computer? (it changes with all computers depending on your setting and player!). [color="#ff0000"]Was the sound ok?I almost wish I had not titled this post as "Happy Conclusion." It was happy but only a day or two... then I started having other problems... unbelievable. So, If I gave the wrong impression, sorry!

CUE: disable prompt "Record your message after the tone."

I would like to disable the prompt: "Record your message after the tone. When you are finished, hang up or press # for more options."
I found the „no voicemail conversation caller recording-prompt“ command, but it doesen’t seem to work.
Is this command supported on an UC540?
Regards
Stefan...

From exec mode, use the command
Router# Service-module i0/0 session
You will be connected to the Cue console
Enter your username and password (same as the credentials you used to access the CLI)
Once logged in, press enter to display the cue console (it's waiting for input, so pressing enter re-displays the command line)
Enter configuration mode (conf t), type the command, issue a copy run start to save, then type exit to return to the IOS CLI

Editable messages after receipt?

greetings,
a coworker asked me if it is possible to do something in apple's mail, on saturday... this is a feature that he uses in eudora frequently. i also was used to using on occasion when i used eudora...
is it possible in apple's mailreader to edit a received message? for example, on occasion someone forgets to put a subject. eudora has the ability to change the message from "read-only" to "writable", so the recipient could type in something in the blank subject line. this helps when one needs to be able to find the message again later...
my coworker told me that he not only uses the "make message writable" in eudora to fix subject line problems, but he also adds in a "keyword" to important message he want's to be able to find later, by searching for the keyword... at my job, we work on many different "projects". my friend told me that he also enters the project name as part of the keyword. (usually people don't put in the project name on email messages, unless the message comes from a list server). this can be very helpful if one wants to set up a rule to automatically transfer messages to another mailbox based upon the project or even the keyword if it is a message that he wants to safe... because email has become our communications trail, we often have to go back to the email to see how we handled something or what we agreed to do to finish a task.
i'm involved in our macintosh user's group at work and get lots of questions like this where people use features in other programs and are looking for similar solutions in apple's software... it is interesting to see how diverse the feature set is across all the different software tools... obviously no one program would or could have every possible feature. but the various features are usually solving a problem. so sometimes the different programs will have different ways to solve the same problem...
anyway, i haven't run across the ability to modify a message after it was received in apple's mail. but there are many features hiding in apple mail... so i may not have run across it yet. hopefully, there is some way to address this topic...
any suggestions on this?
thanks-

sorry but that's absolutely impossible in Mail. the best you can do is open the .emlx file with the actual e-mail in a text editor and edit it by hand there.
as for adding a keyword, try [Mailtags|http://www.versiontracker.com/dyn/moreinfo/macosx/27730].

IPhone 3g (16gb, black) 2.1 gives an error message after the upgrade.

Hoi,
Ik heb een T-Mobile iPhone 16gb (zwart) geupgrade van 2.0.2 naar 2.1.
Upgrade is goed gegaan, tot het moment dat ik een venster zag met de tekst "Waiting for activation. This may take some time." met de knop Dismiss.
Ik heb een tijd lang gewacht (een hele nacht), maar er gebeurd niets. ook niet na het aan klikken van de Dismiss knop.
Vervolgens vanmorgen een restore gedaan, telefoon data teruggezet vanaf backup.
Helaas met hetzelfde resultaat.
Wat is de oplossing voor dit probleem, ik heb Apple support ook gebeld, maar na het maken van de iPhone menu keuze, word ik verwezen naar T-Mobile terwijl het hun product is ?

I have talked to several iphone technical reps and received different answers in regards to this issue. I work for at&t and had my 1st customer with this issue today. When he left our store last night his phone was fine. He upgraded this morning to the 2.1.2 upgrade and that's when his phone was left crippled on the "waiting for activation" message. I was advised to have the customer reset the iphone in every different way possible. Also the customer did a restore from itunes. None of this helped and now the phone will be replaced. All of the reps I spoke with even tried to blame it on activation when his sim card was clearly working in other phones. After 3 hours of back and forth there was no answer.

ITunes says a newer version of software (4.3.3) is available. However, when I download it it gives me an error message after the download is complete. Any solutions?

When I sync my iPhone 4 with iTunes it says that a newer version of software (4.3.3) is available. However, after it appears to download the software I get an error message that the server timed out. What's happening?

This is asked and answered here many times each day. You can do a forum search ( right side of this page).
Disable your firewall/security software and try again.

How to restore edited messages after Thunderbird crash?

I work with several messages opened usually to check details of a conversation or for preparing the answer. When Thunderbird crashes all these open messages are lost. Some I edited are in the Drafts, the ones I just viewed are lost.
Is there a way to restore a Thunderbird session? For Firefox this is a standard, for TB it should be as well.

If you mean that the Organizer's catalog is empty, search your entire computer for
*.pse8db
and use Organizer's File...Catalog...Custom Location to browse to the directory that contains the largest *.pse8db file.
Ken

HT6058 I can no longer use facetime or messages after the iOS 7.0.4 update.

After the most recent update, I can no longer connect to Facetime and I no longer recieve messages. I can send texts, but I don't think I can receive them. Any ideas on when a fix can be expected?

Change your iPod DNS to 8.8.8.8
That should work. Cheers

I am having issues with being able to send videos through text message after the update

I have the motorola droid 4 and after the recent update, I am no longer able to change my video settings on my phone. I need to be able to change the quality to low to be able to send as mms, however the option is no longer there? I have went through settings and nothing gives me the option to record a video and send it through text. error says that the video can not be attached because it is too large. can someone please assist me. The update was 4.1.2 version.

I have the Droid 4, and the 4.1.2 OS; when I open the camera and switch to video, then tap the gear for settings, I can choose HD+ (1080), all the way down to 320x240 resolution (5 different choices for resolution)
I can then go to that video in my gallery, and I have the share option there... how long is the video you are trying to send? What is the total size of the file? Perhaps the receiving party's phone cannot receive the video file?

I can't message after the new down load

I can't message after new download. Error message says not connected to network. Network is working fine

Hello A20,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Best of luck,
Mario

I dont receive text messages after the iphone update

after i updated my phone software on my iphone 4, i am not able to receive text messages from anyone. and when i send one like regular, it says that the inbox is full, which is has never said that before. any idea when it is doing that?

Are you having trouble with SMS messages (green)? Or iMessages (blue)? Or both? What happens when you try to send a message? What troubleshooting steps have you tried? Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? Have you contacted your carrier to make sure everything is ok with your account?

Text messaging after the new software update

i have not been able to text out since the update, it sits forever in the message window and i can type the message i want to send but when i hit send nothing happens, it sits for a few minutes and then says "failed to save message" .
then goes blank. i have power cycled, and i have waited and i tried plugging in the device and trying again, nothing. It has alwys used up my entire battery that was a full 100% at 7 am and down to 20% by 9 am and all i did was try and sent a text message...WTH is going on with it?

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you might want to try a clean OS reload via AutoLoader:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I receive a picture message after the notification to download disappeared?

I received a notification of a text msg not received. I was expecting to receive a photo from someone, so I knew I would have to download it. I clicked on the wrong thing and the notification disappeared. Now there is nothing for me to click on to download this message, and I don't see anything showing about a failed message. How do I retrieve this? Device is a Droid Razr M.

LenaA_VZW, I actually ended up chatting with someone from Verizon support about this the other day and we weren't able to resolve it. We checked the available memory, and actually I had recently deleted 300+ photos and some apps so I should be ok on that end. I don't think I have a memory card in the phone. In the 2 years I have had this phone, I have never been able to send photos, but I was always able to receive them. Oddly enough, I was able to send a photo when we were troubleshooting the other day, but I wasn't able to receive. She had me put my phone in safe mode and she tried to send me a photo in safe mode, but it still didn't work. In the end, the last option she had for me to try was to backup my phone and then do a complete reset, but I didn't want to try that yet as I didn't want to risk losing anything. It would be nice if I could resolve this, but I'm planning to upgrade to a new phone probably in about 6 months, so if I have to just deal with not being able to receive picture texts until then, I will. If you have any suggestions or ideas of what could fix this though, I definitely will try!

Editing messages after the hour is up.

Similar Messages

Maybe you are looking for