Editing movies in iPhoto

I have several movies I have taken with my digital camera and I have two issues I hope folks can resolve:
(1) Can I edit (e.g., rotate) these movies within iPhoto? I've tried and Quicktime forces me to save the file as a *.mov within my "Movies" folder. The movie within iPhoto is unchanged. I would like my movies in iPhoto to edit the same way that I can edit my photos.
(2) I recently found that Front Row is a nice program for going through my iPhoto pics and my movies in my "Movies" folder. However, the movies within iPhoto do not show up for viewing in Front Row. A work around would be for me to copy all my iPhoto movies into my "Movies" folder but that doesn't seem to be a very elegent solution.
Thanks for your help...

Hi peichsta,
1. the method you used is the only one I know of. You would then import the edited movie back into iPhoto and delete the old movie from iPhoto.
2. I don't have the newer macs so I don't know the answer to this one.
I can tell you that I don't use iPhoto to import my photos or movies.
The following is my workflow with the reason why.:
When iPhoto 5 first came out I really think it was programmed to import the smaller 30 sec video clips that cameras were taking at the time. Since then, digital cameras, at least my Canon S2 can take clips as large as your memory card can hold. The first time I tried to download my images and movie clips with my new camera, iPhoto stalled at the movie clips. I wasn't going to take any chances messing up my iPhoto Library so I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
This way I have the photos in iPhoto and I also have just the photos backed up to DVD.
The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive or copy them to an external drive.
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

Similar Messages

  • Can I move an iPhoto event from Mac to Mac?

    My wife and I both have MacBooks with our own iPhoto libraries. Although we each have our own photos in our libraries, there are times when we both want the same photos in our library. Sometimes we simply each download the photos from the camera and do our own thing in our separate libraries. But there are times when we are traveling with the camera and just one MacBook and we'll download photos into events and edit them. When we get home, we often want to move these photos (usually edited and nicely organized into events) to the other MacBook. I've been exporting the photos to a temporary folder, transferring them to the other MacBook over our network or using Firewire, and then importing them into iPhoto on the other MacBook.
    Is there a way to move an iPhoto event from one MacBook to another? If so, will it bring the "original" (prior to being edited photos) as well as the edited versions? I understand the whole non-destructive editing thing.
    I've looked in Finder, opened iPhoto Library with "Show Package Contents", and noticed that there are folders for each year that I have photos (e.g. 1999, 2000, 2001, etc.), and in each year folder there seems to be a folder for each event. In the event folders are the .jpg files. I was thinking that perhaps I could just copy the event folder from one MacBook to the other (placing it in the same place in the "year" folder), but I wasn't sure if this would screw up the iPhoto database that I drop them into. I'm pretty sure that the "importing" process of getting photos into iPhoto involves more than just dropping photos in a folder.
    Any advice would be greatly appreciated.

    Welcome to the Apple Discussions. Use iPhoto Library Manager as Terence suggested. It would work like this .
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • How can I move itunes/iphoto library from SSD to HD on my new imac?

    I have a lovely new imac with the SSD option. My old comps' boot disk was migrated to the SSD because it is the boot disk for the new computer. This is great and speedy but now I'd like to move my huge itunes and iphoto libraries from the SSD to the 2TB HD. I would rather not move the whole 'home' folder. I would appreciate if anyone could tell me how to do this.
    with thanks in advance, nedro
    Message was edited by: nedro
    Message was edited by: nedro

    Go to ~/Music/iTunes and drag & drop the iTunes Media folder to your HDD. It will not actually be moved, it will be copied. Depending on its size this can take a few minutes. When the copying is finished open iTunes and go to Preferences/Advanced. The first area is +iTunes Media folder location+. Click the Change button, browse to the location of your iTunes Media folder on the HDD and press Choose.
    Quit iTunes. Then drag only the iTunes Media folder from the SSD to the Trash and empty. When you restart iTunes it will be using the media folder from it new location.
    To move the iPhoto library, quit iPhoto. Got to ~/pictures and drag & drop the iPhoto Library to the HDD. It will be copied to the HDD. Drag the library on the SSD to the Trash and empty. Open iPhoto, follow the dialog in the window that appears to locate and choose your iPhoto Libray on the HDD.
    Dah•veed

  • Big Blunder with movies in iPhoto '08 and web galleries

    I've just upgraded to iLife '08 and found a REALLY BIG BLUNDER in the use of movies with iPhoto and the web gallery. As it is, the new 10GB limit won't be enough for diddly squat of movie hosting.
    I've got a Canon A640 that saves to .JPG and .AVI formats. iPhoto opens a gallery with them just fine.
    But .AVI movies take up ~50MB per minute of video. A 2 minute movie I made is about 100 MB, while a 9 minute movie is 550MB in size. So while it's fine to view them on your desktop, you do NOT want to upload them!
    However, iPhoto has no ability to convert .AVIs to any other formats.
    I went into iMovie and manually selected each .AVI clip and Exported it as "medium" to my local drive. Ok, this gets you a .m4v file that's much more workable.
    Going back to iPhoto ... uh, gee, "iPhoto cannot recognize that file format".
    The new iMovie can export exactly ONE format -- .m4v -- and iPhoto thinks it's an iTunes file and won't work with it. Thanks a lot guys. What movie format IS iPhoto expecting to use, exactly?
    I went over to the Apple store and presented my dilemma to one of the geniuses there, and the ONLY solution he could recommend was to get a license for Quicktime Pro and use it to do the conversion to .MP4. But, even then, iPhoto won't recognize .MP4 files in your folder. You have to explicitly import them. Again, iPhoto seems to like movies, but ... in what formats?
    As an aside, MP4 files are smaller than M4V files, but the additional compression takes quite a toll on the image quality.
    I filled up two 4GB SD chips with a couple dozen photos and several movies. The way iPhoto works right now, the only way to get these movies onto a .Mac gallery is to upload them directly, which is NOT a good idea! They take up an ENORMOUS amount of disk space, take FOREVER to upload, and I doubt users will find it very fun waiting for a 500MB download to view them (which download will take longer than the length of the video being viewed).
    iPhoto needs a way to recognize .AVI files and STRONGLY discourage you from uploading them -- offering instead to convert them to something more useful, like .M4V format, WITHOUT having to swith over to iMovie or use Quicktime or some other program to do the conversion.
    It also needs a way to tell it to handle other movie file format besides .AVI files.
    Thanks
    -David

    Errrr.... you guys are totally missing the point.
    Apple sells little Canon cameras, and they have them sitting right next to just about every Mac in the store. Ever noticed them? Maybe you own one? (I suspect not because you probably would have noticed this already if you did.)
    These Canon cameras take two types of images: stills are .JPGs and movies are .AVIs. Got that?
    JPGs are compressed and "ready to use".
    AVIs are UN-compressed and NOT "ready to use". You can play them locally and they look fine. But there's not much to tell you they're HUGE FILES. When I say "huge", I'm taling 50 MEGA-BYTES PER MINUTE huge. That means a measley 2 minute clip is 100 MEGA-BYTES in size. OK? Now, what's the download rate on your iPhone? How long will it take you to view a 2-minute AVI file? But, surely, nobody is dumb enough to load them onto their Web Gallery, right? Keep on reading.
    See, when you connect the camera to the computer, most people have their system set to open something like iPhoto or Aperture when the camera is connected. Agreed? (Maybe YOU don't, but LOTS of people DO.)
    Notice that you can choose to have iMovie or Final Cut Pro or something else launch when you plug the camera in as well. It's up to you. Most people launch iPhoto - or Aperture if they've got it.
    It so happens that iPhoto '08 loads in in BOTH sets of files. Why in the world iPhoto is happy reading in AVI files is beyond me, considering it won't recognize M4V files and has to be slapped to get it to take MP4 files. But it happily reads AVI files with no problem.
    Now, if you've got your iPhoto set to AUTOMATICALLY SYNCHRONIZE with your WEB GALLERY, what happens?
    Well, if you're like me and you filled two 4-GIGA-BYTE Flash cards with movies, and iPhoto launches (like when you plug the camera or flash memory into the computer) and starts to SYNCHRONIZE with your WEB GALLERY, what's gonna happen?
    Did you actually TELL it to upload those files? NOPE! But it DID!
    Several HOURS LATER your computer will finish UPLOADING 8 GIGA-BYTES of MOVIES to your WEB GALLERY! And if you interrupt it, well, it'll happily start over when you turn the computer back on again.
    That's really nice since .Mac now has a 10 GByte limit. Two and a half 4-GB flash cards will fill up your .Mac account if you shoot movies with your Canon camera, have iPhoto set to launch when you attach your camera, and/or have it set to automatically synchronize with your web gallery.
    All I'm saying is that if iPhoto is going to work with movie files, it should NOT blindly upload AVI files, NO WAY. I'd much prefer it if it would let you apply some kind of compression to them, eg., turn them into MP2 files. (MOV files are even bigger than AVI files, from what I can tell.)
    We're not talking about what you THINK about doing. We're talking about the DEFAULT BEHAVIOR of the program for a VERY COMMON SCENARIO -- that you don't HAVE to think about.
    So it's very possible that while you're happily editing your AVI movies in iMovie or Final Cut, iPhoto is happily sitting in the background uploading the same files to your Web Gallery. And you are clueless.
    Is that making sense now?

  • Movies in iPhoto 08 - How to Copy to iMovie 08

    Hi there,
    Is there a particular way to successfully copy the movies in iPhoto 08 (was upgraded from iPhoto 06) over to iMovie 08 (also upgraded from iMovie 06 but I never had movies in there).
    The iPhoto is grayed out when I try to import.
    However, I clicked on a movie, used QuickTime to Export it to Movies. Then I imported it into iMovie. Unfortunately, no sound is now heard when played back. I used the default settings with the H.264 format.
    Are there other settings I should be using to allow sound to be played in iMovie?
    Is there a better way to get all the movies over to iMovie? If so, please let me know what it is and how to successfully accomplish the task of copying them over.
    Also, when I click on the photo icon in the lower right of the iMovie display area (next to the "T" icon) I can see my iPhoto folders but I cannot locate any of the movies. I even created a new album in iPhoto and all the movies are in that album but I cannot access it in this area. Any ideas on why and how to resolve this?
    Next. What is the best way to back up all my iPhotos onto DVD and which format is the best one to use for this task?
    Any assistance is much appreciated. Thanks in advance.
    Lynn

    Is there a particular way to successfully copy the movies in iPhoto 08 (was upgraded from iPhoto 06) over to iMovie 08 (also upgraded from iMovie 06 but I never had movies in there).
    How you need to "convert" files depends on their source compression format. Muxed formats like MPEG-1/MPEG-2 need to be converted using an MPEG-based, third-party application like MPEG Streamclip (free), iSquint (free), FmpegX (donation-ware), Visual Hub (pay-ware), etc. since neither the audio nor video content can be edited/imported by iMovie '08. Using QT based applications like QT Pro, iTunes, GarageBand, etc. will lose the audio since QT cannot demux/convert both in a single pass.
    Compression formats like Kodak's MPEG4/µ-Law combination in an MOV file container will not import because the µ-Law audio cannot be edited. In this case, you can use the "Movie to MPEG-4" export option to "pass throgh" the video data without re-compressing it but convert the µ-Law audio to MPEG-4 (AAC) which both matches the MPEG-4 video and is easily editable in iMovie '08.
    AVI files like Casio's MJPEG/DVI ADPCM combination suffer a similar problem. In this case the Motion JPEG video is once again quite acceptable to iMovie '08, but the audio cannot be edited. In this case, the audio can be extracted, converted, then re-merged with the video track and placed in am MOV file contaibner. However, owing to the "interleaved" format and "half frame" difference between audio and vide, some people prefer to simpy "convert" both audio and video all at once. Either approach will work here since since these audio/video formats (like MPEG4/µ-Law) are "conversion" compatible with any QT based application.
    The iPhoto is grayed out when I try to import.
    If the compression format cannot be edited by iMovie '08, it will not import it. Unlike previous versions of iMovie which automatically converted imported content to DV for editing, iMovie '08 imports and edits the in file's "native" compression format -- i.e., nothing is converted during import.
    Also, when I click on the photo icon in the lower right of the iMovie display area (next to the "T" icon) I can see my iPhoto folders but I cannot locate any of the movies. I even created a new album in iPhoto and all the movies are in that album but I cannot access it in this area. Any ideas on why and how to resolve this?
    Only the photos are displayed here. Look for your movies under the "iPhoto Movies" heading in the "Events" list on the left edge of your screen. If located in your default location (i.e., your start-up drive) they should display automatically if they can be imported.
    Next. What is the best way to back up all my iPhotos onto DVD and which format is the best one to use for this task?
    I back mine up on an annual basis. You can either "back-up" the given year's library or export the files by event, folder, etc. for general use (e.g., sharing on DVD, printing, posting to online servers, etc.) as you may prefer. I choose to do the latter

  • Move from iPhoto '11 to Lightroom using PS Elements to keep Events and Albums

    I am trying to move from iPhoto '11 to Lightroom by using PS Elements as a go-between to keep events and album but it doesn't appear that the option to keep events and albums is possible using iPhoto '11.  However, the instructions for coming from iPhoto '09 show that option.  Is there any way to do this?

    I’m not sure about that routine. I’m not even sure events are transferrable and there of lots of things that could go wrong. You may want to think about importing your masters directly into Ligtroom. From finder you need to be in Pictures (not the application) and control-click on iPhoto Library.
    iPhoto will have created duplicates and hidden your originals. You need to find your masters from the iPhoto Library - Right-Click and select “Show Package Contents”
    Older versions of iPhoto uses an Originals folder and in later versions; Masters. It’s not a good idea to go messing with the structure as it could corrupt the iPhoto Library. Apple has made this structure for good reason; so that you can always use the revert command to go back to an original, even if you have edited in iPhoto using cropping or red eye removal, for example.
    However, if you have no further use for iPhoto, you could consider moving your originals/masters to a new folder structure (iPhoto automatically creates dated sub-folders) and then importing to Lightroom. Alternatively if you still need iPhoto, export duplicates to the desktop and bring those into Lightroom. That will keep iPhoto safe.
    I do actually use iPhoto for creating events which can then be used to make cool slideshows within iPhoto. However Lightroom is my main management and photo editing tool and I have created an export pre-set for sending jpegs into iPhoto. I have even dragged the iPhoto Library off the hard drive to an external hard drive – but that means keeping it connected when using iPhoto.
    This link has further information on folder locations for iPhoto:
    http://osxdaily.com/2011/08/30/where-iphoto-pictures-are-located/

  • Can't edit imported files; iPhoto asks for file import upon each launch

    Hi,
    My hard drive recently went bad and I lost all photos (didn't back up...I've learned my lesson). An authorized repair shop replaced the drive and installed 10.5.2.
    I just tried to import 150 new photos from my camera. After importing from the camera, iPhoto said all files were imported successfully. I was trying to create room on my memory card, so when asked if I wanted to delete the originals, I said yes. (I was planning on backing up the photos just as soon as I got them onto my drive).
    I see them as thumbnails, etc., but I get the grey/black exclamation graphic if I try to edit. Fullscreen gets me a black screen, that's it. Each time I launch iPhoto, it says that it detects 150 pictures not imported. Would I like to import? I choose yes, but the same problem persists.
    When I view each thumbnail, the reported sizes average about 2 mb, so it seems that the real photos are somewhere. I just don't know where. As a last resort, I guess I could try to do screen captures of the thumbnails, but that'll take forever, and I really want these originals back.
    Any ideas? Thanks in advance.

    ObamaFanRC
    Are you running a Managed Library or a Referenced Library?
    If you're running a Managed library, then it's the default setting, and iPhoto copies files into the iPhoto Library when Importing
    If you're running a Referenced Library, then you made a change at iPhoto -> Preferences -> Advanced and iPhoto is NOT copying the files into the iPhoto Library when importing.
    If you're running a managed library is sounds very like a damaged database file to me.
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • Trying to reduce size of movies in iPhoto

    I'm trying to free up space on my Macbook air. I have 135GB of videos in iPhoto that have been shot on my iPhone over the years.
    I would like to be able to edit many of those videos so I can reduce their file size. I would be keeping it very simple and just trimming the length of the videos and would just be using iphoto.
    My problem is that the original video is still retained along with the edited (trimmed) version. I want to discard the original so that I can gain back that space. Is there anyway I can do this?
    Thanks,
    Andrew

    Simple answer: No. The whole point of iPhoto is to preserve the original image. You will need to export the videos, delete them from iPhoto, (be sure to empty the trashes), trim them and then re-import the trimmed versions back to iPhoto.
    Note that most apps you might trim with will also use some form of versioning, so be sure that you're actually reducing the file size with whatever app you choose.
    Alternatively, if space is an issue you can just move your iPhoto Library to an external disk:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Viewing quicktime movies from iphoto 08

    I just upgrade to Snow Leopard, I use to be able to view quicktime movies from Iphotos in Leopard, now if i click on the movie nothing happens, From Quicktime doesnt seem to want to open my library where the movies are located. These are small video max 30 secs from my digital camera?

    If I upgrade to iphoto 09 will this problem go away?
    No. Not if you don't install Quicktime 7 Player from the Snow Leopard install disk. You can do a custom install and select the Quicktime 7 Player as the only item to install. That should fix the issue.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • How can I put some movies to iPhoto?

    Hi, how can I put some movies to iPhoto? Is there a type of the file that I can convert my fully renderred .mov (a QT files made out of FinalCutE) files/movies to, so iPhoto (8 or 9) would accept? (then I want to upload the converted (?) little movies from iPhoto to Web Picasa...
    And in a case that it is possible - how one can do this?
    Thanks.
    Message was edited by: marekn

    Have you tried importing your .mov files into iPhoto?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • IMovie doesn't import all movies from iPhoto - at least one solution

    I noticed that iMovie 08 imported my movies from iPhoto, but strangely not all of them. A quick search of the support forums indicated many others were having the same issue.
    After comparing file attributes of movies that were importing successfully into iMovie versus movies that didn't show up, I found that a rogue character ("&") was preventing iMovie from importing the file properly.
    Renaming the title in iPhoto does not resolve the issue, since the file name (in Finder) remains the same. However, if I make a copy of that file outside of the iPhoto Library, rename it in Finder, then re-import it back into iPhoto, then iMovie will see it. I didn't rename the movie file inside of the iPhoto Library for fear of corrupting the library structure.
    I found this to work at least with my .avi files. I still have the same issue as everyone else with iMovie not importing .mpg files that play properly in iPhoto.
    Message was edited by: tsanga

    +I didn't rename the movie file inside of the iPhoto Library for fear of corrupting the library structure.+
    Good thinking! The only way to change the filename in iPhoto is to export the movie file, import it back in, copy over comments, keywords from the old to the new movie, and then delete the old movie.

  • I exported 10G of movies from Iphoto but did not get new room on my hard drive.  Why?

    My hard drive is almost full so I exported about 10GB of movies from IPhoto to an external drive.  Then I placed them in Trash.  However, there was no increase on the hard drive available space after I placed those files in trash.  Also, there was no trash in the trash bin.  So it appears as if the files are not really being deleted.  (They have disappeared from the iphoto events folder.)  I also have the same movie clips in IMovie which I did not manipulate.  Prior to this event I was trying to delete files from a thumb drive and also had the files disappear but there was no change in available space on that thumb drive.  In that case I did the deletion on a PC and when placed back on the Mac computer the deleted space became available. 
    Why are file deletions not being processed to add space to the hard drive?

    I can't help with iPhoto specifically since I don't use it, but just out of curiosity: did/do you empty the trash? Space is not regained until after the trash is actually emptied.
    Also, when you export or drag/copy files,  normally the files are copied to the new location and the originals still exist. As for space on your hard drive: you need to maintain an absolute minimum of 10 - 15 GB; more is better. If you edit/render/burn video, you need to have at least as much free space on your hard drive as the size of the files in your project if you want the machine to perform satisfactorily.

  • Import Movies from iPhoto?

    I have a large number of movies in iPhoto spanning hundreds of events. I'd like to import these into iMovie so that they are stored in my iMovie events folders and completely removed from iPhoto.
    I don't see this as an option in iMovie. Is this possible to do without a complicated workaround?

    There are two ways to do this, provided they are in a format that is editable by iMovie.
    1) Open iPhoto. Open iMovie.
    2) In iPhoto, right-click on the movie and select "Reveal in Finder"
    3) In iMovie, select File/Import/From File and navigate to the folder in iPhoto. If it offers to Move it into iMovie, say yes.
    There is a faster way, if you have hundreds of events. Close iMovie.
    Go to the Movies/iMovie Events folder on your Macintosh HD drive.
    Or create a folder named iMovie Events at the top level of an external drive (the external drive MUST be formatted as Mac OS Extended (journaled).
    Then create subfolders under this iMovie Events folder. The subfolders should be named with the names you want to use for the event names.
    Drag the video clips into the appropriate sub-folders.
    Then open iMovie and let it take the take to generate thumbnails for all these new events.

  • Can I move the iPhoto library to my iDisk

    - Can I move the iPhoto library to my iDisk and by doing so being able to share it between several computers (only one editing at the same time is OK.
    Sharing means adding, editing, deleting ... photos.
    - if yes can I use it with the local copy mode of iDisk?

    I doubt very much that you'd be able to access the library at any speed fast enough to make it viable solution. iDisk access is way too slow to make using a library on it possible.
    And if you did, using the local iDisk copy and then have another computer access the actual iDisk version would only mess up the library when they were synced because you can't just file sync libraries. There are database files whose contents must be updated and there are not syncing applications that can do that. It would be the kiss of death for the library.
    If you want to share a library between multiple computers on a LAN add an external FW hard drive to one of the Macs and locate the library there as Apple suggests: iPhoto: Sharing libraries among multiple users. Although written for uses on one computer it will work with multiple computers on a LAN that can log onto the host computer.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Is it possible for two users on seperate Macs to edit the same iPhoto Library

    Hi,
    I've recently been on an overseas trip with my partner, and now we have 5000 photos to sort through, tag, and add descriptions for.
    Is it possible for us to access the same iPhoto library on each of our Macs to make it faster to sort through the photos? If so, how do I go about setting this up? We have a third mac, might it be better to move the iPhoto Library to that, make it act as server of sorts, and our other two macs as clients?

    Yes it is possible, but there are a few caveats.
    A strong warning: If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries. 
    Only one of you can access the Library at a time. You can't both be working on the project at the same time.
    iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Quit iPhoto in both machines. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    On each machine in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both machines will have full access to the library, in fact, both machines will 'own' it.
    Regards
    TD

Maybe you are looking for

  • My Hp Pavilion x2 10-020nr is showing a "Battery Alert" and will not start.

    I've recently purchased the Hp Pavilion x2 10-020nr about a week ago, and have used it moderately everyday since. I have not over-charged it or downloaded any malicious apps/software (as far as I know) but today I tried to turn it on after charging a

  • New Photos App - Thumbnails on edge or not shown correctly

    Hi, after upgrading from iPhotos to Photos Version 1.0 (209.52.0), all my pictures that have been taken on edge are not shown correctly in thumbnail size. When double clicking one of it they are visualized correctly but the thumbnail is still wrong.

  • Stop motion animation

    Hi, Can quicktime pro be used to create stop motion animation? If so how do you do it? Thanx Dave

  • PI7.0 INSTALLATION

    Hi While configuring POST INSTALLATION ACTIVITIES.I tried to open the "go.bat" and "configtool.bat " files to start the J2EE VISUAL ADMINISTRATION  but getting an error shown in below: \usr\sap\PI7\DVEBMGS10\j2ee\admin>"C:\j2sdk1.4.2_16;\bin\java" -s

  • My iCloud server is bouncing email

    For some reason email addressed to my account is recognized as spam, even though it is not. I checked the sending account's IP address [noted below] with MXTOOLBOX, it isn't coming up bad. Then I checked the account IP listed in the bounce message an