Editing multiple ending symbols in score editor...what the heck?!?!?

I must be dense or something - in ver. 7 lengthening the end bracket on repeated ending symbols was as easy and click-dragging the end to the desired measure. In ver. 8 it appears that there is no editing possible - you're stuck with the default one measure 1st ending!
Please tell me I'm doing something wrong - it's driving me crazy.
Message was edited by: Phattlippz

The usual way is to delete the old font & restore it from a backup copy.
First you have to identify the corrupted font!

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

When viewing multiple item information, I was wondering what the checkboxes next to "Artist", "Album Artist", etc... are used for.

When viewing multiple item information, I was wondering what the checkboxes next to "Artist", "Album Artist", etc... are used for.

When checked, it means that you are going to apply whatever is in the box to all of the selected items.

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

Hi
Try in iDVD
• Save as a DiskImage
• Play this by use of DVD-player tool
Still OK or problems ?
If OK - Burn it by use of
• Apple Disk Util tool - or -
• Roxio Toast™ (if You got this - I love it)
Yours Bengt W

Every time I compress a file over 1.5 Gigs it ends up corrupt any idea what the cause is?

Every time I compress a file over 1.5 Gigs it ends up corrupt any idea what the cause is?

Compression depends on repetativeness of characters within the file. If it can't map those, it won't compress. Images and programs are much harder to compress for that reason, as they both are basically binary constructs. Some image software compresses looking at common lines and points of the same color. Audio files look for the same frequency. Most video formats are already compressed to some extent except full DV.
And files with DRM get even more dicy, since you really can't bypass the DRM which itself is binary code, not to mention not allowed to be copied. This forum can't discuss such issues due to the DMCA rules. As long as it isn't copyright, what are you trying to compress?

My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?

Hi JDValentine,
If you are having issues with a camera on your iPhone, you may find the Camera troubleshooting in the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
- Brenden

Red X on bottom left corner of palette VIs - What the heck is going on?

I have a subpalette of my own VIs in user.lib that have red 'X's on the bottom left corner of them. I have been ignoring it for a long time, but it bugs me that LabVIEW is trying to tell me something is wrong and I don't know what it is.
All the ones with the 'X' are members of a class. They work fine with no problems. The palette items are all pointed to the right place. The class doesnt' seem to have any problems; I use it all the time.
I have never seen this before, nor have I yet found a place where this indication is mentioned either in LV Help or the online KB. It does nto occur anywhere else in any of my other usr.lib libraries, classes, or subpalettes. I have edited that library, class, and rewritten the mnu file over trying to clear it out, but no luck.
WHAT THE HECK IS THIS THING?!?!
Solved!
Go to Solution.

This sounds like an issue described in CAR 185059 where VIs belonging to a class inside an lvlib have a red X on their palette icons. It has been fixed in LabVIEW 2012.
-Chris M

Option+T (What the heck does that do?)

Option+T (What the heck does that do?) I've looked around on the internet and the boards and haven't found what the purpose is. Just curious. Thanks Jeremy.

If you are curious why don't you just highlight the timeline > hit option + T (the timeline gets sexier ) > select a clip > drop a filter on it > set keyframes to modify the filter overtime or use time remap and option click anyware in the time remap green ramping line to set a keyframe and keep your curious eye on the timeline and find that all those keyframes becomes visible and editable in the timeline?

I redeemed one card, pressed the "redeem another card" button, and I only get $10 and not the $20 I'm supposed to have. What the heck!?

I recently bought a $10 iTunes card multipack of 3, and redeemed two the next day. I typed in the first code, and then clicked the button saying "reedem another code". So I did. That's $20 right there, people. Yet, when I bought my first song, I immediately noticed that my account said $10 instead of the $20 i thought I reedemed. I typed the codes again, and they all said "code already reedemed" What the heck!? I have effectively wasted $10 through the internet! Apple, I want my $10 dollars back!

You are expecting 20MB throughput on a $150 router? Well, ok, maybe.. Can you check on your router or switch if the port is set or auto negotiated to 10 or 100? That could explain 10MB limit (although technically a 10Mb port is considered 20Mb theoretical max throughput as 100Mb port is considered 200Mb per Cisco). So maybe you ended up with 10/half somehow? MTU 1500 would also be good for that connection I think and to try to get max throughput.

What the heck is a print album?

Used to be very simple: select a photo, hit command+p and configure the printer; click print, picture comes out. Now I get a Print album? What the heck? all I want to do is print ONE photo; can't figure it out. I get this double pane thing at the top and when I click print it tells me I have no selected pages(?).
ALL I WANT IS TO PRINT ONE PHOTO AT A TIME!!
I can't believe that it's actually EASIER to print from Aperture and Photoshop now than it is from iPhoto.
How very 'Microsoft' this has become.
What am I missing?????
Message was edited by: Rich Cirminello

When I do what you say I get a window that has "Standard" selected in the left column and a blank white page in the main window. If I click print I get an error message: "No pages from the document were selected to be printed"
So then I hit "Cusomize" and I get the Print 'album.' I can see my image in there, but still can't print it (the screen shows a blank preview).
See screenshots here: http://gallery.mac.com/amorphic8#100010
image 1: select an image to print
image 2: what i see when i click the print icon or command+p
image 3: error message when I click 'print' from previous window
image 4: what I see when I click ok from the error message
if I click print on screenshot 4, I get the error message (image 3) again.
GRRRRRRRRR

Cube will not boot... what the heck?

I bought a cube yesterday and it will not boot. This is what has happened so far:
New hdd
installed Tiger
ran updates
restarted
ran more updates
restarted
would not load fully.
Got to Mac OS X loading screen with varying degrees of success, but it always stops loading and the blue bar freezes. Single user startup works. Safe mode a no-go. Fsck finds nothing wrong with disk. I can't eject the disc that's in there no way no how in order to reinstall OS.
Another oddity: Target disk mode says the disk is unreadable, and says it's 7.1 GB when it's 38 GB. If I initialize the 7 gig bit nothing happened.
I put the drive into an external firewire case and reformatted it but I still cannot get the DVD drive to eject.
What the heck? This puppy passed all the tests yesterday just fine! It was ready to rock and roll until this happened! I am very frustrated! Please tell me my 300 bucks wasn't wasted... I need this computer for my business.
The only thing that I realized might be wrong is that the HDD was in master mode when I first put it in. The drive I removed was in Slave mode (this was the factory drive). I have tried to boot it up in both CS and Slave mode and neither one works.

Hi! Try holding down the mouse button at startup to see if you can get the disc out. You made a calculated mistake that went wrong.
"New hdd
installed Tiger
ran updates
restarted
ran more updates
restarted
would not load fully."
You probably used Software Update to update the software and sometimes it doesn't work. You should get the install disc back in and then try an archive and install of the os. Don't run any updates until you are sure the system is stable. After you are sure it's stable you can download the 10.4.11 update HERE instead of using Software Update. Tom
Message was edited by: Thomas Bryant

I am trying to pay my bill online. However, when I click the "submit" key, it tells me my "nickname" is incorrect. What the heck is a nickname? I have never had this trouble before.

I am trying to pay my bill online. However, when I click the "submit" key, it tells me my "nickname" is incorrect. What the heck is a nickname? I have never had this trouble before.

Had the same problem. Here's how I sorted it out, not including yelling at my PC or ranting in my own thread (that's optional): First you want to delete your saved payment option. If you try this and it does not delete, log out and back in. It should be gone. Now re-enter your payment option (credit card number or whatever you are using) and if it asks if you want to save the data for future use, make sure you give it a nickname that doesn't include any special characters. Hope this works for you!

HT1386 I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone. On the computer, a circle is next to the song and the title faded out. What the heck is that all about and how do I get my songs back onto my

I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone. On the computer, a circle is next to the song and the title faded out. What the heck is that all about and how do I get my songs back onto my phone playlist? Never happened before. My software is up to date?

http://support.apple.com/kb/HT2519

I am home sharing songs from my computer (library) to another authorized computer (library), the songs will import, but once i sync the iphone (4s) to this computer the songs are shaded and will not import onto the iphone, what the heck is going on?

I am transfering songs from one computer to another using home share. Both machines are authorized in home sharing. The songs import from (my) windows computer to the other (my wifes) authorized MacBook Pro, computer just fine. Once the songs are in the library and i try to sync her Iphone (4s) to her computer the songs ar greyed out and i can't play them nor see them under iPhone after sync is complete. What the heck is going on? BTW, the songs that i have imported are either songs i burned from a CD or songs i have purchased from the iTunes store, so they should sync no problem!? Help please.

screen print of issue...

What the heck is going on with my Virtual Memory??!!

I'm not really sure why but when I check activity monitor and see my VM it says i'm using anywhere from 230-270 gigs of virtual memory. This is literally fresh out of restart when it says this much and never changes. I go through and check every process I see runing and create a quick estimate of the virtual memory being used, and it's definitely not over 10 gigs if even 5; honestly I think it's listing between 1-2.
What the heck could be causing this? Verified HD and came up clean. Should I be concerned? I'm not gonna lie this macbook isn't running the best it used to be. Watching videos, whether mp4, mkv, youtube, is pretty laggy. I'm aways sure to close all other processes to to try and maximize video performance, not that it helps much. I'm considering a fresh install and recovery via timemachine.

I excluded the list of fonts from step 4 as I'm a graphic design major and have well over a thousand...and I didn't want you to burn up your scroll wheel or rub the tips of your fingers off with the amount of scrolling you'd have to do had I included them .
Command 1:
com.displaylink.driver.DisplayLinkDriver (1.7)
com.rogueamoeba.HermesAudio (3.0.1)
com.Cycling74.driver.Soundflower (1.5.1)
com.bresink.driver.BRESINKx86Monitoring (7.0)
com.logmein.hamachi (1.0)
foo.tun (1.0)
foo.tap (1.0)
Command 2:
com.autodesk.backburner_server
com.autodesk.backburner_manager
net.openvpn.client
com.vmware.launchd.vmware
com.themha.airlock.daemon
com.rogueamoeba.hermes
com.logmein.hamachi
com.google.keystone.daemon
com.displaylink.usbnivolistener
com.bombich.ccc
com.autodesk.wiretapgateway
com.autodesk.sw_start
com.autodesk.sw_server
com.autodesk.sw_probed
com.autodesk.sw_dbd
com.autodesk.sw_bwmgr
com.autodesk.dl_mpd
com.autodesk.backburner_start
com.autodesk.adlm
com.adobe.versioncueCS4
Command 3:
com.wacom.pentablet
com.lexmark.hostregister
com.lexmark.hostinfoupdater
com.lexmark.hbnlistener
com.google.keystone.root.agent
com.displaylink.useragent
com.adobe.CS4ServiceManager
com.google.GoogleContactSyncAgent
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9
com.adobe.AAM.Scheduler-1.0
Command 4:
/Library/Components:
XiphQT.component
/Library/Extensions:
ham.kext
/Library/Frameworks:
.DS_Store
AECore.framework
AEProfiling.framework
AERegistration.framework
Adlm.framework
Adobe AIR.framework
AudioMixEngine.framework
Cairo.framework
Compressor.framework
DSPPublishing.framework
DivX Toolkit.framework
EWSMac-GC.framework
EWSMac.framework
Frameworks
FxPlug.framework
GLib.framework
Gtk.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
Jackmp.framework
Jackservermp.framework
MacFUSE.framework
MediaServerAPI.framework
Mesh3DS.framework
Mono.framework
NyxAudioAnalysis.framework
OpenVPN.framework
Panda.framework
PluginManager.framework
ProMetadataSupport.framework
Python.framework
Qmaster.framework
TSLicense.framework
WacomMultiTouch.framework
XSKey.framework
libZJBIG.dylib
libxml.framework
/Library/Input Methods:
/Library/InputManagers:
Safari AdBlock
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
CANONiMAGEGATEWAYDL.plugin
CANONiMAGEGATEWAYLI.plugin
CouponPrinter-FireFox.plugin
CouponPrinter-Safari.webplugin
DivXBrowserPlugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
WacomNetscape.plugin
WeatherScope.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npdivx.xpt
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS4ServiceManager.plist
com.displaylink.useragent.plist
com.google.keystone.agent.plist
com.lexmark.hbnlistener.plist
com.lexmark.hostinfoupdater.plist
com.lexmark.hostregister.plist
com.wacom.pentablet.plist
/Library/LaunchDaemons:
com.adobe.versioncueCS4.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.apple.remotepairtool.plist
com.autodesk.adlm.plist
com.autodesk.backburner_manager.plist
com.autodesk.backburner_server.plist
com.autodesk.backburner_start.plist
com.autodesk.dl_mpd.plist
com.autodesk.sw_bwmgr.plist
com.autodesk.sw_dbd.plist
com.autodesk.sw_probed.plist
com.autodesk.sw_server.plist
com.autodesk.sw_start.plist
com.autodesk.wiretapgateway.plist
com.bombich.ccc.plist
com.displaylink.usbnivolistener.plist
com.google.keystone.daemon.plist
com.logmein.hamachi.plist
com.rogueamoeba.hermes.plist
com.themha.airlock.daemon.plist
com.vmware.launchd.vmware.plist
net.openvpn.client.plist
org.macports.Privoxy.plist
/Library/PreferencePanes:
DivX.prefPane
Fan Control.prefPane
Flip4Mac WMV.prefPane
MacFUSE.prefPane
PenTablet.prefPane
VersionCueCS4.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
/Library/Privoxy:
privoxy
/Library/QuickLook:
BrushViewQL.qlgenerator
GBQLGenerator.qlgenerator
LogicQLGenerator.qlgenerator
VMware Fusion QuickLook.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
CanonMJPEGAVI.component
CanonMJPEGAVIDec.component
CanonText.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
DivX Decoder.component
DivX Encoder.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
IMXCodec.component
MayaIFF.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
BRESINKx86Monitoring
CoreDuoTemp
FanControlDaemon
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
alot...
Library/Frameworks:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Move_Media_Player.plugin
doubleTwistWebPlugin.bundle
fbplugin_1_0_1.plugin
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.8F30A2BB-9699-4472-B47A-69D 7FA822C70.plist
[email protected]
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.google.GoogleContactSyncAgent.plist
Library/PreferencePanes:
.c4dsetup
.c4dsetupCINEMA 4DF51A2E69
Airlock.prefPane
Connect360.prefPane
Perian.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Command 5:
Connect360Helper, DockSpaces, MiniUsage, OpenVPN Connect, Bowtie, SpacieHelper, Rowmote Helper, Dropbox, BambooCore

Editing multiple ending symbols in score editor...what the heck?!?!?

Similar Messages

Maybe you are looking for