Editing on another computer

I built my website at work on iweb. Is there a way to edit it at home with iweb?

Transfer the file Users/username/Library/Application Support/iWeb/Domain to the second computer (and back again).

Similar Messages

Can I reinstall Adobe Design Premium cs5.5 Student and Teacher edition onto another computer?

Can I reinstall (deactivate on old computer and activate on new computer) Adobe Design Premium cs5.5 Student and Teacher edition onto another computer? If this is possible would I have to prove that I am a student again, send you the documents etc?

Can I reinstall (deactivate on old computer and activate on new computer) Adobe Design Premium cs5.5 Student and Teacher edition onto another computer?
Yes.
If this is possible would I have to prove that I am a student again, send you the documents etc?
You have a permanent serial number from when you did this the first time and that is all that is required.
Mylenium

How to continue editing on another computer

I began editing my film on FC.10, can i continue editing on another computer with version 7? thank you for any help that can be given

You can export an XML file from FCPX and use Xto7 to convert it to a format that can imported into 7.

How do i transfer my edits to another computer

i have transferred my music by copying and pasting the entire itunes folder onto the hard drive of another computer and importing it into itunes there
how do i transfer the edits in comments and groupings, playlists, ratings, etc
or is there another way to pick up all the songs and tranfer them with edits ?

First, when you say "Store" you mean the "Store" option on the menu bar not the iTunes Store in the source menu. And if you want to transfer music from computer to computer its harder than just authorising the new computer. You have to transfer the files manually. I do hope you have an external HDD or a FireWire 400 cable (if you have two Macs). Basically copy and paste the iTunes folder (not the iTunes Music folder) onto the external HDD and from the HDD to the other computer. If its a Mac make sure that its in the Music folder. Open iTunes with the option key down and click Choose Library. Navigate to the Music folder and select the iTunes folder.

Can't Edit this Page ..already editing on another computer

So, I was Editing a Page and went to Publish it, but it
couldn't Connect, so I hiit Cancel.
I tried again to Edit the page, when up pops this message in
a Yellow Box.
"You Can't Edit this Page now because you are already editing
it on another computer. Please contact your webmaster "
[IMG]http://i11.photobucket.com/albums/a173/JoeWood_/Misc/Contrib.jpg[/IMG]
<a href="http://photobucket.com"
target="_blank"><img src="
http://i11.photobucket.com/albums/a173/JoeWood_/Misc/Contrib.jpg"
border="0" alt="Photobucket - Video and Image
Hosting"></a>
The problem is, I don't have a webmaster anymore, so, how can
I correct this so that I can Edit my Page again?? I have my
Contribute Key (I think) and probably have the password ..

Go here:
http://www.adobe.com/support/documentation/en/contribute/
Download "Using and Administering Contribute" PDF and page
229 has your answer step by step.

Can I open a E-book, which is linked with Adobe Digital Editions On another computer of Mine?

I Have an Ebook, Which can be opened only by using Adobe Digital Editons,
Thus, i downloaded the adobe digital Editons, and authorised it without Adobe id and Passdode..
But now, i found out that i cant open the file in another computer of mine...Is there a possibility for me to open the ebook in another computer of mine
Any Help is appericiated...Thanks in advance :

You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.

Transfer/copy photos with edits to another computer or harddrive

Hi,
How can I make this process work?
1. My partner and I both have lightroom : she's on a PC and me on a Mac.
2. We both take photos together at a shoot.
3. We then go back, make edits to our own photos.
4. Then we need to share them with eachother in order to make a contact sheet that contains both our edited photos.
ANy ideas?
We were trying to use an external hard drive and then importing them to the other's machine, but I cannot find a way to export the files with the edits. Should I export a catalog based on a selection of photos? Would she be able to import these into her library with deleting her own photos?
Anybody in the same situation?
Thanks,
Nicole

I want to expand a bit on this topic. I've got 3 production computers and two laptops; sometimes I need my assitant to work on some things while I work on stuff (or I'll need to work on them remotely via laptop). So, my thought is to put my catalog on my 2 TB networked server. Then have either the Mac, or 2 PC's (or download the catalog to the laptops) to be able to open it. How efficent is LR2 in working across a network AND...
What about images that are on the network server. Can LR2 work effectively with that? My production boxes are exactly that production computers... the serer is where I store my images (and backup on another system/series of removeable HD's. Which I'd love to have that linked in one master LR catalog.
I almost want to ask Matt K. or Scott K. this question... they work with tons of photos all the time.
-jeff

How do I import xmp files that contain edits from another computer?

I edited some images on my laptop and the Metadata Catalog settings show changes are written into the .xmp files. I copied both the CR2 and corresponding .xmp files to my Desktop computer. When I imported the images into LR 5.5, the edits did not show up.
How do I get the corresponding .xmp files to update the CR2 files? Or do I have to start over and import the LR Catalog from my Laptop for just this series of images?
If I send off my CR2 files for someone to edit and they send me back the .xmp files containing the edits, shouldn't I be able to update my original CR2 files???
Thanks, Marc

Also for the info to be read 100% both computers need to be using the same version of LR. (e.g. Lr 4.x will not apply all the info from LR 5.x)

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

Extended Features prevents me from editing a form on another computer.

Extended Features prevents me from editing a form on another computer. I have to use this program at work but when I save it to a disk then try to edit it at home or vice verse I can't. This makes Adobe a horrible program to use.
I really HATE IT.
I can't contact a human being by email.
Adobe is a HORRIBLE company to work with.
I wish my work would have stayed with Lotus or what ever it is called now.
I doubt anyone even reads these posts.
DISCUSSED WITH ADOBE.
Deb Amburn

Acrobat Adobe Reader
I have no clue what the right forum would be. would you enlighten me
please. I have wasted hours trying to figure out who I need to talk with. I
would think designers would know the most about the issue.
Obviously, I am wrong. I don't think anyone cares about my problem or for
that matter any ones problem with any Acrobat software.
On Mon, Nov 10, 2014 at 2:09 PM, Pat Willener <[email protected]>

Sharing an edited video on another computer

I am editing video to be used in a PowerPoint presentation. The video needs to be saved in a format that will be viewable on any random cumputer that I load up the ppt file. The problem is that when I export and save the videos I can only view them on this computer. When I open the ppt on another computer the video will not play.
How can I save videos with decent quality that can be viewed on other computers (Mac and PC)? Sorry for the dumb question.

VandyZane,
This is assuming you had the movie encoded in H.264 when you finalized in iMovie. On the PC, you have 2 ways to install the codec. One through Quicktime which you did. The other way is to install a standalone codec (which is H.264). Most PCs would probably have this codec installed as it is one of the most popular used codec to watch downloaded movies. The reason why powerpoint is nothing seeing your movie is because you haven't wrapped it yet into a Windows video file. The program I mentioned changes MP4 to AVI, or with an *.AVI extension. Most PC programs assumes the AVI file as video and use the WMP as the default player.
Why don't you try converting one and then see if WMP plays it. Then insert it into the ppt file and see if it plays properly. If it does, then make sure the corresponding presentation PC has the correct codec installed.
The H.264 vFw codec is also available from the same place I linked you to -- sourceforge.net.

I have an iPhoto event on my computer that I have photo-edited, named, key-worded, and place and dated. How to I transfer that event to another computer in a way that includes ALL the information?

I have iPhoto '09, version 8.1.2. I have an event in the Library whose photos have all been edited, faces named, keywords added, and place and dated. How do I transfer the event intact (with ALL the editing, names, dates, places, etc) to another computer? Exporting does not include all the information (no dates or face names), nor does burning a DVD (it shows the location pinned on the map, but doesn't write out the name of the place).

File -> Export:
Kind: Jpeg
Check the boxes at Include...
This will get everything you mention except the Faces data. There is no way to share that on any system.
Note that this information including the dates is written to the IPTC and Exif metadata. So you'll need an app that understands these things as the Finder doesn't - a Photo app for insstance.
There are two kinds of metadata involved when you consider jpeg or other image file.
One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export. However, the Photo Date doesn't change.
The problem is that the Finder doesn't work with Exif.
So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?

I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?

Is this problem only occurring with the project you copied from an external drive, or with any FCP project?
For example, if you were to create a new project, do you still have this problem?
In FCP, if you go to the menu FInal Cut Pro > System Settings and look at the Scratch Disks Tab, is it set where you expect it to be? Have you tried switching the scratch disk to a different disk?
MtD

I have downloaded adobe editions on my mac and would like to authorize it. says I can't because I have it on another computer. I deauthorized it on that computer

I have downloaded adobe editions on my mac I would like to authorize it I get the message I can't because I have it installed on another computer my dell laptop i deauthorized it on that computer

They should be in itunes on your computer. Just sync them to the ipod.
You could also redownload them:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have saved my project to my harddrive and then when I try to open it on another computer that uses final cut I am unable to open the edited project

i have saved my project to my harddrive and then when I try to open it on another computer that uses final cut I am unable to open and edit the project

Assuming this is an external HD, use finder to select the drive with your original computer, then press Cmd+i to show info. Go to the bottom of the info window and make sure 'Ignore ownership of this volume' is checked so that other computers can access it.
Andy

Editing on another computer

Similar Messages

Maybe you are looking for