Editing Or Merge/Decision element in the Activity diagram

Hi,
I am creating Activity diagram in JDeveloper. After i added the Decision elememt(diamond shape) in to my activity, i would like to add some text (like isSuccess) in to the elemet.
But edit action is disabled. How can i enable it?
Thanks

I think you can determine this by checking if AFVC-SUMNR has a value.

Similar Messages

  • I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

  • Photoshop and elements 13  Working in iPhoto Want to edit image using photoshop elements Did the following  IPhoto Preferences Advanced Edit Photos: In drop down menu chose in Photoshop Elements  Also control click and chose edit in external editor  Drop

    Photoshop and elements 13
    Working in iPhoto
    Want to edit image using photoshop elements
    Did the following
    IPhoto>Preferences>Advanced>Edit Photos: In drop down menu chose in Photoshop Elements
    Also control click and chose edit in external editor
    Drop down menu edit photos in external program>photoshop Elements
    Go to to the image I'm working on  --- selected the image, the clicked on edit. When nothing happened I double clicked the image. Still elements didn't open. Then I opened the Elements editor, went back to iphoto and tried the entire process again. the photo still didn't open on Elements 13 for editing.
    I have 3 Elements 13 books as well as looked on line--all my references say the exact same thing ---- iPhoto>Preferences>advanced>edit in external program>photoshop Elements
    I uninstalled and reinstalled both iPhoto as well as Elements.
    I spoke with application technical support.  There appears to be nothing wrong with my copy of iPhoto.  However there is no support from Adobe.  I waited for over 1.5 hours for chat support several days ago, and finally gave up.

    You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

  • Want to change the cost element for a activity type (KP26)

    Hi,
    I want to change the Allocation cost element for an activity type in KP26. I have already changed the cost element in the activity master data in KL02. Now i want to change it in KP26. I am trying to delete the existing line item in KP26  to create the new line item with the new cost element, but system not allowing to delete the existing one. It throws the error message ""Allocations with XXXXXXX/XXXX (Cost center/Activity type)  exist ; deletion not possible". Can someone please help me to change the cost element?
    Regards
    Dev

    Hi Rao and Lalit,
    Thanx for you people for helping me. i havin gone doubt here. If i am deleting the existing line in KP26 and create new line with appropriage cost element will it be cause the existing datas? I don't want to go for another activity type, because our process is a complex process exist all over the world in more than 300 company codes. So i want to use the existing activity type but want to change the allocation cost element alone. Is there any possibility to change the cost element alone?
    Regards,
    Dev

  • I have a new iMac running OS 10.9 when I use the Command S shortcut it no longer saves the active document it speaks it instead.

    I have a new iMac running OS 10.9.  When I use the Command S shortcut in any of my apps (numbers, text edit etc), it no longer saves the active document it speaks it instead.  How can I revert to the save shortcut function?

    have you looked in
    system preference->Dictiation & speech if it's assigned there?
    or system preference->accessibility if it's assigned there?

  • Activity Diagrams & Swimlanes

    I'm using JDeveloper 11g release (11.1.1.2.0).
    I previously used JDeveloper version 10.1.3.3.0 and made use of swimlanes in the UML Activity Diagrams. In version 11g I can't see any way to use swimlanes in the UML Activity Diagram. Are swimlanes no longer available in the UML Activity Diagrams or indeed any UML diagrams?

    There is indeed no more "swimlane" in the current JDeveloper. You can still display and assign each element to its correct partitions, that is the name in uml2.
    To display the partitions for each element, there is 3 ways you can do that:
    1- go to preferences for the activity diagram and for all nodes choose to "Show Partitions".
    2- If you already have elements then select the element and in the property inspector choose "Show Partition"
    3- or select the elements and choose "Visual Properties" from the context menu and change the "Show Partition" there.
    To assign the elements to the proper partitions you can do it in 2 different ways:
    1- Once you have shown the partition, it can be in-place edited.
    2- Double click on the element to fire up the dialog and change the partition there on the right panel of the root node.
    We have as top priority to add the swimlane support on top of uml2, the activity diagram is now uml2 compliant.
    I hope it helps.
    - Dominique

  • Activity with "(re-uese)" postfixed to name in an Activity Diagram

    I am creating a new activity diagram and trying to including a pre-existing activity. This activity is currently not used in any other diagrams. (I had created a diagram and later deleted it. All the activities still stayed in the "Application Sources" under the package.)
    This occurs when I do drag and drop from the "Application Sources" into the diagram. It also happens when I right-click and use "Add to diagram".
    How do I include the activity without having the "(re-use)" postfixed to its name in the activity diagram?
    The only way I can find to not have the "(re-use)" is to delete the activity and recreate it from scratch. Is there an easier way?
    I am using version 10.1.3.0.2.223 on Windows XP.
    Mike

    Mike,
    Although I have reproduced this issue in 10.1.3 Production as well I would recommend moving up to the latest version rather than working off a Preview from 2 years ago as we have made many improvements to the overall look and feel of both JDeveloper and the Modelers.
    To workaround the issue, remove the Activity with the '(reuse)' after it from the current diagram and save and close JDeveloper. In a text editor open up the Activity file ('xxx.oxm_act'), you should find a line like:
    <cid name="CONTAINER_REFERENCE" key="<Some Text>" />
    Replace the above line with:
    <null name="CONTAINER_REFERENCE" />
    and save the file. Reopen JDev and include the Activity back on the Diagram, it should no longer say '(Reuse)' after it.
    Regards,
    Lisa
    JDev UML QA

  • I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

    Hello,
    How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
    I have tried several tutorials but these either:
    - show correction in premiere sequence (which is not practical; given the huge number of files we have)
    - or show the editing in audition of a sequence, not the clip.
    We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
    Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

    if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes.  there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
    premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time.  since there is no dynamic link, its not possible to bring merged clips into audition.
    Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
    Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
    Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
    this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

  • I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. Wha.

    I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • How to merge an openActivity with the conflicting activity

    Hi all,
              I checked out the activity which is already checked out by another developer.He checkedIn that activity.Now if i tried to checkIn i am getting an error as Conflict in CheckIn .I had gone through some documents regarding Merging of Activites which are conflicted.
    Can anyone give me step by setp procedure for merging 2 Conflicting activites
    Regards
    Padma N

    Hi,
    1. Open the &#8220;Integration Conflict&#8221; view to display where the version conflict occurred.
    2. Select &#8220;Auto Merge&#8230;&#8221; from the context menu. The list of the source code with conflicts will be displayed.
    3. Select the relevant source code and choose &#8220;Merge Conflict Manually&#8221; from the context menu. The two source code versions will be displayed and will indicate the conflict line.
    4. Choose &#8220;Accept changes&#8221; after resolving the conflict by merging the code lines.
    Also go through the help content on 'Resolving Conflict'
    http://help.sap.com/saphelp_nw70/helpdata/en/44/42dfb4709914bce10000000a155369/frameset.htm
    Regards
    Srinivasan T

  • Edit decision table from the web module

    Hello every one <br>I am using decision table to create rules and my question is can I edit decision table from the web module <br> i.e. can I change decision table values from jsp files(invoke.jsp) and if yes can any one please tell me the steps I should fallow to do it.<br>
    thank you.

    Hi Pratap,
    No, this is not possible. The Decision Table API is not public and the condition and action values can be changed only through the NWDS in BRM 7.1.1
    Regards,
    Arti

  • My edit page in in elements 9 has suddenly stopped working. How can I get it to the workspace?

    My edit page in in elements 9 has suddenly stopped working after over a year. How can I get  the workspace to open?

    You can try Restoring it in iTunes. If that doesn't work you will need to get it serviced.

Maybe you are looking for