Editing pages but not others...

http://castle.eiu.edu/~eiu_taga/
I need to update this page, and I basically need to create / update some rules without affecting other pages.
For example, I'm creating a new page, "Past Work," and I need to adjust the .left rule, but not have it affect any other pages.
I'm sure there is an easy solution, but still learning the CSS rules and such.
Thank you.

There are 3 types of CSS styles.
1) EXTERNAL = a separate physical file that contains your site wide CSS rules and to which all your HTML pages are linked.  See link below:
http://alt-web.com/DEMOS/DW-Link-Stylesheet.shtml
2) EMBEDDED = page specific styles between the <head> & </head> tags in your HTML document. Embedded styles take priority over external styles.  You might use embedded CSS to have a different background image on a particular page.
3) INLINE = styles inside the html code between the <body> & </body> tags.  Inline styles are rarely used on web sites except to over rule a style from somewhere else.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media  Specialists 
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

  • Sidehead: want on L/R master pages but not other master pages

    Hello!
    I've been fighting this all evening and can't seem to get it to work. I would like to have room for a sidehead on my L/R pages in my facing page document but I would like my master page "First Page of Chapter" to not have a sidehead: I would like the text on that one page to span the entire width of the text frame.
    When I try to set this up, however, the first page of chapter has the sidehead, even though it its text frame doesn't appear to have a sidehead when I view its master page.
    What's odd is that the master page sidehead area isn't even the same size as the sidehead that's appearing on the L/R pages, it's much wider.
    Can someone tell me the process for not allowing room for a sidehead on the first page of the chapter (with the "First Page of Chapter" master page) but having sideheads on the subsequent pages that belong to the L/R master pages?
    Many thanks!

    Rocky,
    To add a maybe unnecessary level of detail, the side-head area is a flow level property. Separate text flows within a document may have separate settings, but normally you would not want to have separate text flows.
    Apart from using special paragraph formats, as Arnis mentioned, you could also make the text frame on your title master page wider and move it to the left side possible a little bit off the page, so the main column is positioned as you wnat/like/need it.
    - Michael

  • Trouble loading some web pages but not others

    having a little trouble lately...
    For some reason safari and, well, any other browser, come to think of it isnt work on particular pages.
    Example. The other day google.com wasnt coming up just spinning its wheels then saying:
    Safari can’t open the page “http://google.com/” because it could not connect to the server “google.com”.
    Another example: Safari could not open the page “http://cbgundaker.com/” because the server stopped responding.
    I called my ISP and sat thru 2 hours worth of trouble shooting and got nowhere. They thought it was a DNS issue but I can reach the sites from other machines in the network so it looks like it is only effecting this particular powerbook. I've sat two machines down next to each other and it'll work on one but not the other(same wireless or wired network). annoying.
    Anyone have any ideas?
    Thanks,
    p

    pardon me for butting in, this problem is driving me crazy.
    i just tried your dns thing, no effect.
    what i can't understand is why does my iBook display all 5 pages that i can't display on my iMac? i visit these sites everyday
    -the bookmarks are synced between the two, iBook and iMac use same internet
    -i copied the iBook plist for internet and safari over to my iMac-no change
    -i did all the resets, clear cache, disk utility,ditch plists
    -safari, camino,opera,firefox,shirra do not open these 5 pages
    -macworld.com opens fine, macworld.com/news/ does not
    -my admin account does not display these 5 pages
    -i turned on airport, connected to someone's unprotected network and tried the sites to no avail (i have my own wired internet connection)
    -it hangs on the 2nd to last item in the progress bar, ie "8 out 9 items"
    -this all started sometime after the last security update and before10.4.6
    i am at wits end!

  • Can edit home page but not other pages of website. Can anyone help?

    I've just installed Contribute CS5 and tried some editing of my website. I found that I can only edit the home page. When I go to the other pages the draft that is created doesn't show my images and I also can't get into the page to do anything. On top of the draft page there is something like a small logo with the letters "php" and the curser stays there. Does anyone know why that is and what I can do to make it work? And if yes, can you explain it to me as if I was 3 years old, please. Thank you.

    It is pretty easy but it should be considered more of a content management system rather than a basic web editor (even though that's what it does). For example, we have 25 content posters that use Contribute. They know basically nothing about building websites so we use Contribute so that they can do limited things on the site. But it still takes us using a different tool in the background to keep the site up and running.
    The unfortunate news is, unless you know PHP language, your site will be a bear to work on. It's a scripting language so, much harder than HTML.
    Your site really wouldn't be to hard to rebuild in HTML if you have some experience with building websites from scratch. If you know HTML, you can use one of many low-cost HTML editors out there. If not, you'll need to use a tool like Dreamweaver but even then, it helps to know HTML in case something goes wrong and you have to dig in and find the problem.
    Your other option would be to hire someone to build a new site for you. This time, let them know you will be using Adobe Contribute to work on the site so that they can put it together properly.
    Not sure why it was built in PHP to begin with.
    Good luck.

  • HP Laserjet CP1525 printing test page but not other documents

    My laserjet printer is not printing any documents. When I got into the properties, the properties program freezes. For some reason the test page prints, but when I try to get anything else to print it won't do it. The IP address has not changed, but my wireless was down for a short time this AM. Can I disable to printer and then re-enable it again without having to hook up the ethernet cable to get the wireless to work correctly?

    Did that. Now I can't even print a test page. Do I have to reinstall using the ethernet cable because I do not know the steps to doing that and I just removed the printer and then reinstalled as a local printer. It doesn't seem to be connected at all now. It says its connected onthe LPT port and it is just on wireless. It still prints config pages so it's working.Can you tell me the steps to doing it with the ethernet cable?

  • I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    Hi Crushed,
    Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
    Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
    Regards,
    Ian.

  • My iPhone4 docks correctly with some devices but not others, please help!

    Hi,
    Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
    I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
    *Phone used to dock fine with anything and everything - this was about 1 year ago.
    *for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
    *symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
    *I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
    *I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
    *2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
    * now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
    *just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
    to my knowledge it is NOT;
    - a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
    - a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
    -a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
    could it be a problem with the data exchange between phone and device when it is docked??
    or do I really need to try changing the port for an 'official' one??
    or is it just broken and that's that?!

    It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

  • Show breadcrumb bar only on main list pages but not site pages

    Is there any way to show the breadcrumb bar only on list pages (for example to navigate in document libraries, surveys, etc.) but no in site pages or wikipages. The only solution I found was adding a webpart to each page I want to
    hide the breadcrumb bar but this is no long-term solution. How can I make sure that the breadcrumb bar only shows on ootb list pages but not on my site and wiki pages? 

    One way of hiding breadcrumb is through css. You can apply the css in custom master page that will hide the breadcrumb and in your default master page leave it as it is.
    Using IE developer tool, check the class that is applied on the breadcrumb and apply as style of display none to that class. This way you can hide the breadcrumb. I don't have my dev box up so cannot tell the exact class right now but using IE developer
    tool you will be able to find the same.
    Geetanjali Arora | My blogs |

  • Flash file works sometimes, but not others

    Here is the page with what I am trying to do. It is volunteer
    work for a non-profit, and I am not an uber flash programmer, but I
    have come this far, and would appreciate any helps diagnosing the
    possible causes for this. Please view this link to see what I am
    talking about. Clicking on the thumbnails opens a separate window
    with a photo gallery.
    http://www.coafkids.org/dev/photovideo/
    On my computer, this works fine, both on the authoring end
    and the server end. On some others, reportedly, they can view some
    of the gallery slideshows, but not others. The reports have been
    random, so there is no consistency with which shows work and which
    do not.
    The flash file is the same exact file for each of the
    galleries. Each gallery has its own folder on the server. In this
    folder, there is a flash file(same exact file in all galleries) an
    XML file specific to that gallery, and an images folder. The XML
    file gives the flash file the location and respective caption for
    each image that is located in the images folder. With all the flash
    files named exactly the same in each folder, with exactly the same
    code, how does it not work on only some machines??
    Any light, anything at this point would be extremely
    helpful..
    Thank you in advance,
    Armo

    The people that report problems are only reporting them for
    one, two, or sometimes just three out of the 9 galleries.
    Therefore, since it is exactly the same flash file used in all 9,
    why would some choose not to work. And even worse, why are the ones
    that do not work varied across each person?
    Thank you for your response.... hope we can all solve this
    mystery together...

  • I CAN PRINT HP PAGES--- BUT NOT ON LINE PAGES

    I CAN PRINT HP PAGES BUT NOT ON LINE PAGES
    ERROR HAS OCCURRED IN SCRIPT ON THIS PAGE
    ERROR UNSPECIFIED

    Please read this post then provide some details.  What printer model? What operating system? How is the printer connected? 
    What browser are you using? Are you using HP Smart Printing or some similar program?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Podcast - works on iTunes page but not when subscribed

    Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.

    It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
    http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3

  • Indesign master page putting the images on the master in teh middle of some of my pages but not all

    indesign master page putting the images on the master in teh middle of some of my pages but not all =[

    We'll need some more information, and probably a few screen shots, like the master page and one of your pages where the image is not showing.

  • Feel a bit silly! But my mouse only seems to scroll down the page but not up??

    I Feel a bit silly! But my mouse only seems to scroll down the page but not up??

    Rosa R wrote:
    Hi All - my question can be a bit silly ...
    Not silly at all...
    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311
    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region

  • I can open some older numbers files but not others. I get a message that says I need a newer version of numbers.

    I can open some older numbers files but not other. I get a message saying I need a new version of numbers. Why would some files open and not others?

    SK,
    Here's the deal. If you ever open a Numbers file with Version 3, the file is converted to Version 3 and can't be opened again by Version 2. Version 2 and Version 3 are undoubtedly both on your machine and they look so similar that you may not realize which you are using. So, there are two steps to getting into trouble.
    1. Open a Numbers 2 file with Numbers 3, edit it and Close it.
    2. Try to open that file with Version 2. You ill get the error.
    To always get it right, find the file you want to open in Finder, Right-Click it and choose Open With... and pick Version 3 from the drop down list.
    If you have a file that you prefer to use only in Version 2, always use Open with... Numbers 2.3.
    Jerry

  • How come I can print off the Apple support page but not of my note book i n documents.

    How come I can print off the Apple support page but not off of note pad in my documents.

    No. It is not free unless the phone was originally purchased less than 90 days ago or you have an active AppleCare agreement.
    Where did you get the phone? This is almost always a symptom of a phone that was hacked or jailbroken to unlock it.

Maybe you are looking for