Editing PAL wmv clip and converting to NTSC

I have a 50 min clip (given to me by a client) which was captured in PAL, edited, and compressed as .wmv file; the audio rate is 44.1KHz, square pixel ratio. I need to edit in FCP and convert to NTSC. I've tried rendering in FCP after it's imported, converting to NTSC before bringing it in (probably at the wrong settings), and changing the sequence settings.
I can view it fine in the viewer, but once I put it in the timeline, the sound is completely unsynched (probably the 44.1 thing), which is why I changed the sequence settings to 44.1.
I did find the macworld article from March '06 on how to successfully transfer to PAL using Compressor 2 and will use that. Here's the link for those who want it:
http://www.macworld.com/2006/02/secrets/marchcreate/index.php
Here's my question, do I first transfer the huge clip through flip4mac to make it a .mov, or do I put it through compressor? Or, do I edit it down to the 7 - 1 minute clips I actually need from the clip, export those using ???? and then do the other conversions?

Do you think the out of sync sound is due to the
44.1KHz as opposed to 48KHz?
No.
I did try changing the
sequence settings to 44.1 bringing the exact clips
in, and then rendering (which should convert from
.wmv), but it was still out of sync. Doing it that
way, should I make the sequence settings 44.1KHz but
leave it PAL until I later do the compressor
conversion?
I'd use flip4Mac to get the files to .mov's... then edit in PAL. Export the PAL sequence to compressor for the NTSC conversion.
I think once you get them to .mov's you're possibly home free with the sync problem. FCP just doesn't support wmv's... so that could be the sync problem.
Jerry

Similar Messages

Avi, wmv clips NOT WORK for imovie?

can i edit avi, wmv clips by using imovie? or i have to transfer into mpeg,mov? how to do it?

Use a tool such as MPEG Streamclip or QuickTime Pro to convert them to DV, and import the DVs into iMovie.
(44145)

Importing PAL DVD to Edit and Export as NTSC DV

A producer in China has Betacam SP PAL material that I need for a DV NTSC Project. I am not confident that a standards conversion process in Beijing will yield acceptable quality. I'm thinking of asking him to make PAL DVDs of the footage to send to me. Does anyone have experience with importing PAL DVD into an NTSC project, to master as NTSC DV? Will the quality of the PAL DVD measure up to the NTSC DV? Thanks for any help or advice you can offer.

I'm still waiting to hear whether they would send the tapes. I suppose I could ask them to make a Beta SP PAL clone and send that to me. But we're getting into a lot more cost here -- a high quality dub on their end and a high-quality standards conversion here in the States. Since this project will result in a standard NTSC DVD, I'm hoping that maybe going the PAL DVD route would save a bunch of bucks and still be acceptable quality. If anyone has actual experience importing PAL DVD to Final Cut Pro, perhaps they could speak to that.

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

You should check that the Project settings match the clip settings before editing them to the Timeline.
Only newly created Projects will change not existing ones by adjusting the Project settings.
If, for example, you have a Project set to NTSC DV you can only end up in trouble if the clips are PAL 1920 x 1080i.
Al

How to convert my NTSC project to PAL?

Hi! I'd like know how i can convert my ntsc project into PAL.
I need finish a DVD for my client take to ANGOLA and there is PAL system.It is possible? My Encore is 2.0.
Or It is possible put my NTSC movie into PAL project and let encore transcode the movie? Thank you very much and sorry my english.

You have several options.
1 - Create a new PAL project in Premiere Pro. Capture your footage in the usual manner, and as soon as it is in the project, hit the ENTER key to render it.
2 - Create an NTSC project in Premiere Pro, capture to NTSC DV footage, and export it out again.
Close project.
Create new PAL project, import the NTSC clip & then interpret/conform the footage to the project settings.
3 - Set up an NTSC project, capture footage, export to PAL DV or MPEG-2 from Premiere.
4 - Use TMPGEnc Xpress 4 - it's standards conversion is very good.
5 - Use ProCoder, as Ruud suggests
6 - Use CCE SP if you have it.
I'd try as many different ways as you can, and view the lot to see what looks the best.

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

TA25521 After editing a video clip that was shot in 60fps how do I convert that clip to 24fps for publishing

After editing a video clip in FCX that was shot in 60fps how do I convert that clip to 24fps for publishing?

There is only a limited amount of Compressor instruction available unless you purchase a subscription to something like Lynda.com or a tutorial from Ripple or Larry Jordan.
My advice to everyone who is interested in learning about Compressor is to read the first two chapters of the user manual – on basics and workflows. Those should provide enough of an understanding to cover the majority of things users need Compressor to accomplish. Of course there is plenty more for those who want to explore.
Here is a short write-up from Ken Stone on changing frame rates.
Good luck.
Russ

Final Cut and QT can't view/edit PAL HD footage recieved from Germany...

Final Cut and QT can't view/edit PAL HD footage I recieved from Germany - I spoke to filmer and he told me that it is HDV 1080i50.
I downloaded program VLC and was able to view the footage through there.
When I import it into FCP, it ether shows a black screen or crashes immediately - in QT, it only shows a white screen.
I have downloaded the QT plugin for MPEG movies.
PLEASE HELP!!!

If it's MPEG-2, chances are its a muxed file. You should be able to use MPEG Streamclip to demux and convert the file into whatever format matches your FCP Sequence specs.
But 1440 x 81? That doesn't sound right at all.
-DH

Can Compressor convert my NTSC video to PAL?

I am trying to convert my NTSC footage to PAL. I was given a tip that the key is in the compressing stage and then use Studio Pro and burn a PAL DVD. Is this correct?
Thanks so much!!!! it really helps!!!

i saw you on the other forum.., you got fobbed off to this one.., actually you can 'convert' to PAL in both DVD Pro and Compressor..,
if you can use either at all you already know it.., do you know where the settings are in compressor.., (is your compressor working??).., an you load settings and assign a sourse and a destination.., if you ca do those things you can already 'convert.'
what ever, assuming compressor is working on your puter, open compressor and save a project name (give the project a name.) now in the
hit 'add file' (the icon, top left)
go to the settings/destination window (the window that covers the bottom left of your screen)
click the triangle that says 'apple'
click the triangle that says 'DVD best quality 120 minutes (if thats how long you want it.., as long as your movie is under this time your OK)'
drag that setting to the long strip in the window above (top right), check the sourse so you know where the file is going.
look in the inspector window and click the icon, second from the right, this is your encoding settings.
click, video format; change the setting to PAL.., check the frame rate has changed to 25fps
back at the window, top right, you will see 'submit.'.., hit that and it will send the job to the render window.., watch the magic
the same can be done from the inspector in DVD pro.
if this was too confusing, sorry, .., there must be some tuts somewhere.., try 'larry jordons' web site, or maybe 'peachpit.com'..??
M:)

How to edit a Animated Gif file and convert to SWF

I am using the creative cloud with fireworks. I chose the free trial with buying in mind if I saw it work properly. I simply want to upload an animated GIF file and then download it as a SWF file. I saw someone on youtube do this and it's not that if I get on the correct page I would not know how to do that but I just cannot find how to get the GIF into the software to edit. It has just simply put them in the creative cloud folder which can open them on IE> How do i make it available to edit and convert to SWF please? Thanks in advance.

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I've been giving HD videos in MTS format and convert the for editing in FCE. Looks good in the program, but when I export the finished film, quality had been noticeable diminished. Is there any way to prevent FCE from lowering the output quality?

Hello -
I've been sent HD footage in MTS format and converted it to Mp4 for editing in FCE. It looks good in FCE but when I export the movie, the quality is noticably diminished. Is there any way I can prevent FCE from lowering the quality on export?
Thanks.

>I use Foxreal video converter for Mac to convert the MTS using the Apple intermediate codec setting and the problem is that I don't get image, just audio
My thought would be to NOT use Foxreal video converter.
Use MPEG Streamclip or Clipwrap.
-DH

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

I can't imagine any worse workflow than converting to JPEG to edit text, then back to PDF. Text in a PDF is a vector thing, smooth at all resolutions. And JPEG is made for photos. EVERY conversion to JPEG and back loses quality but how much loss there is will vary.
If you must go to an image format, try PNG.

How can I edit a video clip in PE and take it out of PE to use elsewhere?

I want to add edited video clips from PE to use in my photoshop slideshow. I would also like to use the edited clips in another programme, but I only get a file that can only be opened in PE. I have PE 4 and Photoshop 6.on a desktop PC using Vista.
Message was edited by: Mellieha

Many thanks for your reply.
I have video thumbnails from my video camera in My Videos folder. I would like to edit them individualy and return them to my folder as thumbnails again.
I hope I have explained my needs properly. I have made a slideshow including video on photoshop, but I get lost with it on PremE so I have kept to the job on PhotoEl. It seems to work for me apart from the problem of editing the video clips. I have added audio to the slideshow, but when it gets to a video clip I lose the video's sound. I would like to keep that rather than the added audio (music) that plays over the stills.
As you have no doubt realised, I am a beginner and a pensioner. Would senility be an excuse?
Thanks again,
John

Editing PAL wmv clip and converting to NTSC

Similar Messages

Maybe you are looking for