Editing Pdfs using the Annotations and Drawing Markups
I regularly use the Annotations and Drawing markups on Pdfs on Mac to edit, but since updating to Adobe Reader 11 everything has gone haywire. The Pdf freezes constantly. Although I can still edit on screen, none of the Markup shows in the toolbar so I can't use it to review or navigate around the Pdf. I can't delete the Pop-ups or markup by right clicking as usual. The Save button in the top toolbar doesn't work - I have to go to the Drop down menu, which takes longer. It's impossible to close any Pdfs by clicking the red top left button - I have to go to the Drop down menu to close. It's hopeless! Any suggestions?
I have Adobe Reader XI version 11.0.9 and Mac OS X version 10.6.8. I wonder now if I have the right version ...
Similar Messages
-
Hi, I work in the sign industry and I am looking at a way to streamline our preprint setup for artworks
the issue is that we will get an artwork that is 6m x 2m. This is to big to do in one print so we will chop it into 2-3 pieces and then print those.
this is currently done by laying out the full artwork in indesign then exporting it as a pdf. this pdf is then imported into illustrator where we will manually cutup the artwork using clipping masks (it has to be manual due to cuts in the artwork needing to managed so it doesn't go though text, ext).
ideally I would like to lay it out in indesign then markup this layout with boxes which show the areas to be cut out. then we I export I'd like indesign to export each box as its own pdf(or pages in one pdf) with cut marks and bleeds.
is this possible in indesign using say the slice tool? (the slice tool seems to be for html elements)
any help or suggest would be most welcome
Kind regards
GarethHello gareth, not sure if the info' below will be of use, but I will give it a go.
Try this…
(I am using Indesign CS5.5)
1. Create your desired page size.
2. Then create 2 or 3 more pages
3. Open the pages window (from top menu - window - pages)
4. (fig 1) From the pages menu click top right down arrow to get the menu and uncheck ‘Allow Document Pages to Shuffle’.
5. (fig 2) From the pages menu, drag page 2 and 3 next to page 1, see fig 3 for result.
6. (fig 4) Place text/image across the pages you have created then save as a Pdf. -
I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank youPages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry -
Creative Cloud Student and Teacher Edition .I use the Macbook.I got the mail that said my order was checked,but I don't get the number.So I still use trial.Hoe can I change my character into member?
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
My Macbook pro won't open downloaded programs, it just opens the code it was written in using the text and edit app. How can I fix this? I just bought the computer last month so this is some what frustrating.
If you are downloading .exe files, those are Windows programs, and will not run on your Mac unless you install Windows on it. (That is possible, if you need one of those apps.)
-
Is it possible to break an edit into small scenes, and then sew them together, but without losing quality by using the 'publish and share' options?
redflashred
What is important here is that you know the properties of your source file(s), set the project preset to match the properties of those source files, and then export with settings as close as possible to the original. Often you can do this without noticing quality differences in the export.
I am understanding and defining your issue as you wanting to maintain the quality of the original imported files in the export. If that is the case, the please supply the following, and I will give you a step by step
a. What are the properties of your source files (including bitrate). Here I am looking for
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
file extension
A quick way to get that type of information is knowing the brand/model/settings for the camera that recorded the video.
2. Based on that information we can set manually a project preset to match those source property.
3. When we go to export...example Publish+Share/Computer/ and your choice and its preset, we can customize the preset selected
under the Advanced Button/Video Tab and Audio Tab of that preset in order to try for the best possible match between the properties of the
original file and the properties of the export.
But, please let us know if you also need help in trimming the original import at the Timeline level prior to export.
Your mention of Publish+Share suggest that you are working with Premiere Elements 11, 12, or 13. What is the computer operating system?
Thanks.
ATR -
I'm trying to draw a candlestrick chart without using the open and close fields
I'm trying to draw a candlestrick chart without using the
open and close fields, however I am seeing nothing on the cart. The
horizontal and vertical axis are displaying their labels correctly
for the data. Any ideas what is going on here?"nikos101" <[email protected]> wrote in
message
news:gi5rh4$ptn$[email protected]..
> Is it not to draw the line between the high and low
then? The data I
> recieve has no open and close data :(
>
I've never seen a candlestick that didn't have all 4
properties.
You may find the floating columns do what you want here
http://demo.quietlyscheming.com/ChartSampler/app.html
or possibly the
vertical line type will work for you.
HTH;
Amy -
Please advise how I can register my Photoshop Starter Edition when I apply I do not receive an unlock code so I am unable to continue to use the program and all my photos are locked in, please advise, thanks John
Please refer to the appropriate Forum, this one is dedicated to Photoshop proper.
Photoshop Album Starter Edition -
Can I publish a PDF to the web and have others access it and use weblinks within the document?
Is it possible to publish a PDF to the web and have the viewers be able to click on links within the document. I'm asking because I found a PDF file WebQest online and it allowed me to click on the links. How did they do that?
What is your operating system?
Can you open that PDF with a text editor and check that the first four characters are '%PDF'. -
The application does not use the screen and run in the background
Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
private SSGameCanvas gameCanvas ;
private Command exitCommand ;
private Player player = null;
public void startApp() {
try {
// create new game thread
gameCanvas = new SSGameCanvas();
gameCanvas.start(); // start game thread
exitCommand = new Command("Exit",Command.EXIT,1);
gameCanvas.addCommand(exitCommand);
gameCanvas.setCommandListener(this);
Display.getDisplay(this).setCurrent(gameCanvas);
catch (java.io.IOException e)
e.printStackTrace();
try {
// start sounds
InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
player = Manager.createPlayer(in,"audio/x-wav");
player.setLoopCount(1);
player.start();
catch (MediaException ex)
ex.printStackTrace();
catch (IOException ex)
ex.printStackTrace();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
if (player != null) {
player.close();
System.gc();
public void commandAction(Command command, Displayable displayable) {
if (command == exitCommand)
destroyApp(true);
notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
protected GameManager gameManager;
protected boolean running;
private int tick=0;
private static int WIDTH;
private static int HEIGHT;
private int mDelay = 20;
Form mainForm;
Display display;
//private int MaxTime;
public SSGameCanvas() throws IOException{
super(true);
gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
public void start() {
this.running = true;
Thread t = new Thread(this);
t.start();
public void stop() {
running = false;
public void render(Graphics g) {
WIDTH = getWidth();
HEIGHT = getHeight();
// Clear the Canvas.
g.setColor(0, 0, 50);
g.fillRect(0,0,WIDTH-1,HEIGHT-1);
// draw border
g.setColor(200,0,0);
g.drawRect(0,0,WIDTH-1,HEIGHT-1);
// draw game canvas
gameManager.paint(g);
public void run() {
while (running) {
// draw graphics
render(getGraphics());
// advance to next graphics
advance(tick++);
// display
flushGraphics();
try { Thread.sleep(mDelay); }
catch (InterruptedException ie) {}
public void advance(int ticks) {
// advance to next game canvas
gameManager.advance(ticks);
this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PMHi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj -
With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Can't save an edited PDF to the same folder it originated from
Can't save an edited PDF to the same folder it originated from. Error "cannot save the document is read-only or is open by someone else" and then it prompts to save the document to another folder or change the name of the document. This is not what I want to do! Using WIndows 7
Hi JC_AUS,
Thank You for posting on the forums. This can happen if the preview of the document is opened in preview pane in Windows Explorer.
Kindly switch off the preview pane and then try the same.
Thanks,
Vikrantt Singh -
Why can I not Convert a Microsoft Office Document to a PDF using the Context Menu?
Why can I not Convert a Microsoft Office 2013 Document to a PDF using the options found in the Context Menu? (Ex: Convert to PDF, Combine Supported Files into PDF?)
I updated to Acrobat XI PRO recently, but now i'm unable to combine or convert microsoft word docs to PDF.
In Adobe Acrobat X I had this feature below, and it would combine Microsoft Office Documents all into a single PDF. Now I no longer have this issue in Adobe Acrobat XI Pro. It seems like it was program named Adobe Elements that was running the conversion.Ajlan. That page is showing as not available. Would the fix apply to Adobe Acrobat X and XI?
Zach Moses
Direct Phone and Fax (615) 577-5814 | [email protected]
W Squared, Inc.
5500 Maryland Way | Suite 200 | Brentwood, TN 37027 | www.wsquared.com<http://www.wsquared.com>
This email and any attachments may be confidential and are solely for the use of the individual to whom they were intended. If you are not the intended recipient of this email, you must take no action based upon it, nor must you copy it or show it to anyone. Please immediately reply to the sender if you suspect you were not the intended recipient. All contents of this email are provided "as-is" without warranty of any kind and are subject to change without notice. W Squared assumes no risk from the recipient's use of this email. W Squared is not a certified tax firm or law firm and recipient should not rely on any communication from W Squared or its employees as having such authority. -
Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel
I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
<af:document title="untitled1.jsf" id="d1">
<af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
<af:resource type="javascript" source="resources/js/home.js"/>
<af:messages id="m1"/>
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
<af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
<af:noteWindow id="popupWindow">
<af:panelFormLayout id="pfl2">
<af:panelLabelAndMessage label="Task id" id="plam5">
<af:outputText value="#{homeBean.taskId1}" id="ot64"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Start Location Name" id="plam6">
<af:outputText value="#{homeBean.startLocation}" id="ot7"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Stop Location Name" id="plam7">
<af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="tasktype" id="pla2m7">
<af:outputText value="#{homeBean.taskType}" id="ot9"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</af:noteWindow>
</af:popup>
<af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
<dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
showMenuBar="false" showToolbar="false" iconPlacement="left"
showTasksAsDailyBar="false">
<f:facet name="major">
<dvt:timeAxis scale="days" id="ta1"/>
</f:facet>
<f:facet name="minor">
<dvt:timeAxis scale="hours" id="ta2"/>
</f:facet>
<f:facet name="nodeStamp">
<af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
<af:outputText value="#{row.PersonId}" id="ot1">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
</af:outputText>
</af:column>
</f:facet>
</dvt:schedulingGantt>
</af:form>
</af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
$("div[et]").live('mouseover', function (e) {
$('#cb1').css("position", 'absolute');
$('#cb1').css("top", e.pageY-4);
$('#cb1').css("left", e.pageX);
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
var element = AdfPage.PAGE.findComponent("f1");
var taskIdToPass = null;
if ($(this).attr("tid") !=undefined) {
taskIdToPass = $(this).attr('tid').toString();
} else {
taskIdToPass = $(this).parent().attr('tid').toString();
var param = { taskId : taskIdToPass };
AdfCustomEvent.queue(element, "jsServerListener", param, true);
if (!popup.isPopupVisible()) {
var hints = {};
hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
popup.show(hints);
}).live("mouseout", function () {
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
private RichPopup popup;
private String taskId1;
private String startLocation;
private String stopLocation;
private long taskId;
private String taskType;
public HomeBean() {
super();
public void serverEventHandler(ClientEvent clientEvent) {
String taskIdString = clientEvent.getParameters().get("taskId").toString();
this.taskId = Long.parseLong(taskIdString);
DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
ApplicationModule am = dc1.getApplicationModule();
ViewObject vo = am.findViewObject("PdTrfDayView1");
RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
Row row = rows[0];
this.taskId1 = row.getAttribute("PdTrfDayId").toString();
this.startLocation = row.getAttribute("StartLocation").toString();
this.stopLocation = row.getAttribute("StopLocation").toString();
this.taskType = row.getAttribute ("PdTrfTypeId").toString();
RichPopup.PopupHints ph = new RichPopup.PopupHints();
vo.closeRowSetIterator();
public long getTaskId() {
return taskId;
public void setPopup(RichPopup popup) {
this.popup = popup;
public RichPopup getPopup() {
return popup;
public String getTaskId1() {
return taskId1;
public String getStartLocation() {
return startLocation;
public String getStopLocation() {
return stopLocation;
public String getTaskType() {
return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AMHi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"
Maybe you are looking for
-
Issue while parsing the chinese character from Mime Message
Hi, I have a issue with the chinese characters while parsing the mime message (MimeBodypart). In the MimeMessage charset is mentioned as "gb2312". i am using the MimeBodyPart.getContent() to get the content. When mimetype is html, it will be uploaded
-
hello, i've read this Blog: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6594 and i was wondering if i can use a filesystem as a repository only for some of the rooms and for the others to use the standard way, the db. if yes, how? thx help
-
The same rows are in the table
Hi, I have a web dynpro with 2 equal contexts. First context (node1) contains data (4 different entries) and the second (node2) is empty (0 entries). I want copy it to second context. I have used the following code: IWDNode srcNode = (IWDNode)wd
-
Service suddenly went bad at home.
I went from having like 3 bars of 4g LTE at my house to 1 bar of 3g or no service at all about a week ago. Nothing has changed, not my phone (Galaxy s4), wifi or surroundings. I was thinking it might have something to do with a cell tower or somethin
-
Multiple issues after upgrade to 10.9.1 Macbook Air 2013
After I upgraded to 10.9.1. in December I have been having all sorts of problems ' Outllook simply stopped working and so did Mail (I am on and Exchange 2010 server) and now take forever to send any message with an attachment all other office product