Editing photo title - very simple question

this seems so simple I am embarassed to ask - I want to change the title of a photo after I import. the help function says use the title box. but the title in the finder never changes so if I want to locate the photo for some other purpose out side of iphoto it is extremely difficult.
does that finder title never change? (if so seems to be poor functionality)
how do I change it other than thru the finder?

HI David,
Yes the title you give a photo within iPhoto stays within iPhoto.
Two Apple kbs for you to read
Don't tamper with files in the iPhoto library folder
About the iPhoto Library folder
To do what you want you have to name the photos before importing into iPhoto. Either download to the computer with your camera software or use Image Capture (found in your Applications folder) to download the photos.
Launch Image Capture (keep the little window open that says no camera is connected or IC will quit if you close the window)
Go to Image Captures preferences and choose what you want to happen when a camera is connected.
Next time a camera is connected, if you chose Image Capture to open, then IC will open and download the photos.
Rename your photos then add to library/import them into iPhoto.

Similar Messages

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

VERY SIMPLE QUESTION REGARDING UML DIAGRAMS IN JDEVELOPER

Hello there,
I have a very simple question. I want to know how I can convert a class diagram that I have created in jdeveloper into a jpg image so I can put in word. When I try exporting it only has the uml to xmi option
Does anyone have a suggestion?

Hi,
Right mouse click on the class diagram,
than click publish diagram on the context menu
and save as jpg where ever you want...
Boris

A very very very simple question

Hi guys,
I have a very simple question and standard but I cant find anywhere...
I have two dateTime variables, i need to calculate difference between this dates in days, thats it.
I tried all functions and tried without success a Java Embed task but I couldnt retrieve this objects as java.util.Date so I couldnt calculate exactly the difference in days like this pure java code:
(dataVencimento.getTime() - dataReferencia.getTime()) / 86400000L)
can you help me this?

Hi Jose
Just see if these alternate approaches works. I know there may be lot like this and you may be lucky to find out simple out of box solution itself. If you want to solve this issue and move ahead, gives these approaches a shot.
1. Create a very simple standalone WebService that takes 2 input date elements (can be of Date type or String type. If string type, convert to date in your java code). Create a simple operation like getDaysBetween(firstDate, secondDate). In the generated webservice impl class, use the java code apis (refer earlier link for usage), and get the difference. Return this value. NOW, invoke this WebService in your BPEL Process, and pass your 2 inputs (if the bpel payload elemetns are date object or string objects of date), and get output, and then use this output in your continuing bpel process.
2. This approach, I did a long back. When we insert any expression using XPath, in that editor window on bottom right side, we see many categories and for each category we see list of functions we can use, like for String, we can use concat etc. I vaguely remember reading somewhere, that we can add our own custom functions also in this section. So explore this direction and see if you can add your own function and then use that fucntion with your 2 input dates.
I have not given solution to your problem, but may be these directions can help you move ahead. Or something along these lines.
Thanks
Ravi Jegga

A very simple question..Very Urgent

HI,
I have a very simple question.I am able to set up the client authentication as well as server authentication. Now do i need to authenticate (both server as well as client auth.) for every request i send to the server on https...i think it should be like that it should authenticate only for the first time and for the next upcoming requests in same session should not require any server or client authentication.. i think as it happens in browsers..
what is the fact actually??..can somebody put some light...right now in my case it is authenticating for every requests..
This is what i have done..
/****constructor part********/
// and tm are arrays of keymanagers and trustmanagers for client keystore and truststore
sslContext.init(km, tm, null);
HttpsURLConnection.setDefaultSSLSocketFactory(ssf);
HttpsURLConnection.setDefaultHostnameVerifier(new MYHostNameVerifier());
/****Method to send the request and response*********/
urlConn = (HttpsURLConnection)url.openConnection();
urlConn.setDoInput(true);
urlConn.setDoOutput(true);
OutputStream os = urlConn.getOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(os);
oos.writeObject(someobject);
oos.flush();
InputStream is1 = urlConn.getInputStream();
ObjectInputStream ois = new ObjectInputStream(is1);
SomeObject retObj = null;
retObj = (SomeObject)ois.readObject();
ois.close();
System.out.println("Get String>>>>> "+retObj.getString());
I am creating the object of this class..and calling the method again and again for sending requests and response..so i think handshake everytime i call the method...what i want is that handshake should happen for the first time and for the next requests no handshake or certificates should be checked or processed..
is it possible ..how..what i need to do for that..
please help me in this..
Akhil Nagpal

Hi,
how could I achieve SSL Session Resumption using HttpsURLConnection.
Thanks.

This is a very simple question,but I don't know.Please me.Thank you!

I am a Chinese student in a university.I have a very simple question to ask.
I have writed a EJB module,and I have deployed to Weblogic8.1 successfully.
1.Now I want to write a client program.Is it necessary that the client program is packaged in the EJB package.For example ,the EJB package is Beans,is "package Beans " or "import Beans.*" necessary in my client program.
2.If I only know the EJB interfaces,that means the EJB module is writed by other programer.I want to know how I can write the client program.How can I call EJB module's method writed by other programer.Could you give me a simple example?
Thank you very much.

I have writed a EJB module,and I have deployed to
Weblogic8.1 successfully.:-)
1.Now I want to write a client program.Is it
necessary that the client program is packaged in the
EJB package.For example ,the EJB package is Beans,is
"package Beans " or "import Beans.*" necessary in my
client program.You need not package your client with the EJB. It can be a JSP/servlet or a stand-alone application.
2.If I only know the EJB interfaces,that means the
EJB module is writed by other programer.I want to
know how I can write the client program.How can I
call EJB module's method writed by other
programer.Could you give me a simple example?
import java.util.*;
import javax.naming.*;
import javax.rmi.PortableRemoteObject;
import examples.*;
class TestEJBHello {
    public static void main(String[] args) {
        Context context   = null;
        Object object     = null;
        // Hashtable for environment properties.
        Hashtable env = new Hashtable();
        env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
        env.put(Context.PROVIDER_URL, "t3://localhost:7001");
        HelloHome home            = null;
        HelloWorld hello          = null;
        try {
            context     = new InitialContext(env);
            object      = context.lookup("HelloWorldTest");
            System.out.println(" JNDI Looked up >>> " +object);
            home        = (HelloHome)PortableRemoteObject.narrow(object, HelloHome.class);
            hello       = home.create();
            System.out.println(hello.hello());
        } catch(Exception e) {
            e.printStackTrace();
        } finally {
            close(context);        // Closes the initial context.
    private static void close(Context context) {
        try {
            context.close();
            System.out.println("*** Context closed. ***");
        } catch (NamingException namingException) {
            namingException.printStackTrace();
        } catch(Exception exception) {
            exception.printStackTrace();
}Here's a sample client app code I use for a HelloWorld EJB. You need to have a EJB client JAR containing the home and remote interfaces in the classpath during compile time and runtime.
x

Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

Very simple question from a rookie

Hi,
I don't know how sequences work in OWB.
I have a very simple mapping:
1 (not empty) source table, 1 (empty) target table, 1 sequence.
Source and destination are connected.
The sequence.nextval is connected to the primary key. sequence.currval is not connected.
When I run the debug mode an error occurs: "Could not find data for all sources and target ...". The "Test Data" shows that OWB has not found data for the sequence.
Help!

I use 10gR2 and OWB 10.2
The tables and the sequence are deployed. They are in the database.
There's something strange about this:
Starting ("Start...") works.
The debugging does not work.
Problem nearly solved ...
Message was edited by:
user517859

Very simple question about webapp list layout.

Hi Everyone!
I am having a very simple issue. I have created a web app and it has a default list layout looks like:
<table><tbody><tr><td>{tag_counter}. {tag_name}</td></tr></tbody></table>
I have placed web app module (using {module_webapps,14273,a} ) in one of my page. In front-end it has show every thing fine except it shows table tag for each item:
<table>
    <tbody>
        <tr>
            <td>1. <a href="/lot/lot-101">Castlepoint Lot 101</a></td>
        </tr>
    </tbody>
</table>
<table>
    <tbody>
        <tr>
            <td>2. <a href="/lot/efg-lot">EFG Lot</a></td>
        </tr>
    </tbody>
</table>
<table>
    <tbody>
        <tr>
            <td>3. <a href="/lot/some-lot">Some Lot</a></td>
        </tr>
    </tbody>
</table>
<table>
    <tbody>
        <tr>
            <td>4. <a href="/lot/some-other-lot">Some Other Lot</a></td>
        </tr>
    </tbody>
</table>
When I delete table and tbody tags from list view, it stop showing table related tags instead it start showing it without any tag.
How to correct this issue? Please help!!!

Here is what you can do:
-edit the webapp list layout via FTP or via the "alpha" File Manager. The WYSIWYG editor will attempt to "correct" your HTML code. Enter something like this:
<tr>
<td>
{tag_counter}. {tag_name}
</td>
</tr>
-on the page you need the listing placed on enter this code:
<table>
<tbody>
{webappmodule here}
</tbody>
</table>
When the page renders you will get the desired result:
<table>
<tbody>
<tr><td>1</td><td>Item1</td></tr>
<tr><td>2</td><td>Item2</td></tr>
<tr><td>3</td><td>Item3</td></tr>
<tr><td>4</td><td>Item4</td></tr>
</tbody>
</table>

Very simple question from a beginner

I am currently doing a little exercise, but I ran into a problem. I have written a class that supports operations on rational number. The fields are two long variables, one each that stores the numerator and denominator.
I have made add, subtract, multiply, and divide methods...
1. what I need help in is: beingh able to store the rational number in reduced for, with the denominator always positive
2. constructing a toString method, equals method, and compareTo method.
3. it also says "make sure the toString method correctly handles the case in which the denominator is zero by throwing an exception.
I have been working on this for a long time now, an I am stuck at this point.
I know this will be very simple for you guys and gals, but I am a beginner. Please offer some input, advice, and/or some code to help me get past this problem.
Thanks so much,
Jason

ok, here is what I have so far
public class Rational {
     public long num, den;
     public Rational(long n,long d) {
          this.num = n;
          this.den = d;
     public static void main(String args[]) {
          Rational r = new Rational(1,2);
          Rational s = new Rational(3,4);
          Rational rmuls = r.multiply(s);
          Rational rdivs = r.divide(s);
          Rational radds = r.add(s);
          Rational rsubs = r.subtract(s);
          r.print();
          s.print();
          rmuls.print();
          rdivs.print();
          radds.print();
          rsubs.print();
     public void print(){
          System.out.println(this.num+ "/" +this.den);
     public Rational multiply(Rational t){
          long n;
          long d;
          n = this.num*t.num;
          d = this.den*t.den;
          Rational answer = new Rational(n,d);
          return answer;
     public Rational divide(Rational t){
          long n;
          long d;
          n = this.num*t.den;
          d = this.den*t.num;
          Rational answer = new Rational(n,d);
          return answer;
     public Rational add(Rational t){
          long n;
          long d;
          n = (t.den*this.num)+(t.num*this.den);
          d = t.den*this.den;
          Rational answer = new Rational(n,d);
          return answer;
     public Rational subtract(Rational t){
          long n;
          long d;
          n = (t.den*this.num)-(t.num*this.den);
          d = t.den*this.den;
          Rational answer = new Rational(n,d);
          return answer;
     //public int compareTo (Rational t)??????

How to transfer edited photos to PC? Question AND some solutions!

I make photos with my 5s. I Love HDR and Volume Trigger, so I use apple camera app.
I hate 4:3 Ratio, so I edit the photo using the apple photo app (or directly after shooting the photo) to 16:9 and it looks great.
Once a Week I sync with itunes and get my photos to PC (Win7) BUT only the Original Photos appear on PC.
I already read in apple help that the editing is "non-destructive" so only applied in meta data, which will be read correctly on a MAC ...
But I want my edited photos?
Is there an easy way to get them?
I already know follings workaround which I dont really like.
1. Email the Photos (too time consuming for me)
2. Use another Photoeditor App and save either lokal in app then transfer only from that app instead of apple photos app. (I love the stock app, especially red eye fix)
3. Use another camera app which CAN directy save 16:9 photos, so nothing to edit.(here also I love the stock app and didnt find anything compareable, I already own procamera 7 and camera+)
4. edit photos on PC and s**t on apple (actual my favorite)
5. Use Dropbox (auto upload function will only upload originals). On the other hand if I choose in dropbox manually photos to be uploaded the edited ones will be there (my favorite #2)
I included the solutions for other ppl. with same problem to let em know.
Any other solutions?

Have you tried after editing the photo, and it is in full view, do a screen shot? The saved screen shot should appear as a new photo.

A very simple question (I think)

My school has purchased some mac minis to use in our science lab, and now I want to get some very cheap monitors as we have a limited budget. I have some very basic questions that some experienced users could help me with:
1. Could I use a TV monitor and connect via the HDMI input?
2. What are the drawbacks when connecting a VGA monitor via the HDMI or mini connector?
3. Would spending a bit more and getting a DVI capable monitor connected by the supplied "dongle" be best?
4. What are the best brands of monitor?
Many thanks,
Geoff

Well...
1. If the TV has HDMI input, absolutely. Your main concern is the level of compatibility with a 'computer type' HDMI input, to avoid overscan/underscan issues.
2. You can not connect VGA to HDMI without a device converting the signal from digital to analog, and such would cost much more than its worth. The only way to connect VGA avoiding compatibility issues is via the Mini Displayport with the correct dongle from Apple.
3. I don't see any special advantage to getting a DVI capable computer monitor, over using an HDTV with HDMI or a computer monitor with HDMI. Basically you just need to find whatever display supports the input best as you need, at the best price.
I won't really answer 4 because there's a lot of opinion in that.

Very simple question: using XWS to generate static data

Hi,
I'm testing interop for JWSDP and a soon-to-be-released RSA Security, Inc. product that will also provide WSS as well as XML signatures, XML encryption, ...
I have already used JWSDP -- xmldsig -- to generate a bunch of XML docs that were signed using JWSDP (all varieties of KeyInfo, signing algos, ...).
I need to do something similar for WSS -- using xws-security.
Do I need a Web container in order to be able to do this? (Again, recalling that all I want to do is generate thousands of encrypted, signed, encrypted & signed, signed & encrypted SOAP messages (using UsernameTokens, X509Tokens, ...))
Do you have any examples that might save me some time?
I have looked through all of the examples in the "interop" and "simple" subdirs of the "samples" subdir of "xws-security" and most of these presume that there's some RPC going on, which doesn't really fit the model of what I'm trying to do here. Got any ideas? Even basic ones? Even big ones?
TIA.
Liz

I've kinda answered my own question in part:
SecurableSoapMessage ssm = new SecurableSoapMessage(soapMessage);
ssm.setFilterParameter(FilterParameterConstants.BINARY_SEC_TOKEN,new X509SecurityToken(ssm.getEnvelope().getOwnerDocument(),cert));
ExportCertificateTokenFilter estf = new ExportCertificateTokenFilter();
estf.process(ssm);
ExportSignatureFilter esf = new ExportSignatureFilter(new DirectReferenceStrategy(cert));
esf.process(ssm);
that transforms the soap message, adding the wsse xml, then I try to sign it:
SignFilter sf = new SignFilter(new X509IssuerSerialStrategy(cert));
sf.process(ssm);
and this fails saying I don't have a privatekey, which makes sense. I need to create a DefaultSecurityEnvironmentImpl probably, define the key in there and then attach that to the SecurableSoapMessage? The problem is, I have the cert and privake key stored on files, how do I go about loading that into the SecurityEnvironment? Would this SecurityEnvironment handle cert chain validation then, since it can be constructed with a trusted keystore?

Very simple question-how to fill a shape I draw with color

hi. I am new to photoshop and having a lot of trouble selecting any shape that I draw. I am trying to do a tutorial that involves filling a canvas with gray, then drawing a smaller white rectangle inside of the larger gray canvas/rectangle. (I did not forget to unlock the background).
My question: how do i select and fill (with white) the second rectangle I draw on top of the larger gray rectangle???
In general, I cannot figure out how to select and/or fill any shape I draw using the rectangle tool. Likewise, the marque shape tools are no help as I cannot seem to draw a marque on my gray rectangle in order to select it and fill it with a white fill. I have also tried to use a "fill layer."
I am almost certain that something is wrong with my computer(I reset the settings), but then again I have not used photoshop in over a year. Any help will be greatly appreciated.

The Rectangle Tool sgould create a Work Path, Shape Layer or Fill Pixels according to the Settings in the Options Bar.
The Rectangular Marquee Tool should create a Selection, which you could Edit > Fill or use as a Layer Mask for a Solid Color Layer.
Could you please post a screenshot with the pertinent Panels visible?

Editing photo title - very simple question

Similar Messages

Maybe you are looking for