Editing picture to fit the Twitter banner - for business

I am trying to edit a picture to fit Twitters new specs etc, however I can't seem to get it to fit. Does anyone have any ideas on correct sizing etc.

InDesignSecrets has some templates for social media http://indesignsecrets.com/premium-member-benefit-social-media-templates.php

Similar Messages

  • How do I get the picture to fit the screen?

    I was playing around with the screen size and not can't get the picture to fit the screen.  How to adjust the screen size? I tried everythign in the disoplays setings and can't get it right?

    Open Preview and open Customize Toolbar. Install 'Zoom to Fit'.
    Ciao.

  • Documetations about the complex interface for business partner

    Hi Folks,
    did anyone knows, were I can find some documentations about "how to use the complex interface for business partner"?
    Kind regards
    Thomas

    The above problems through Notes: 810634 has been resolved!
    The return message is "Instance BJXE001005 belonging to object type BusinessPartnerFS was created".
    But the BP "BJXE001005" has not been established in CRM.
    How to i?
    When i use parameters "roles", the return message is "No update is defined for BP role"?
    How to i?
    Thanks you!
    Do you have any examples I reference to the code?
    Thanks a lot.
    Edited by: Ken.Li on Apr 13, 2008 9:05 AM
    Edited by: Ken.Li on Apr 13, 2008 10:17 AM
    Edited by: Ken.Li on Apr 13, 2008 10:33 AM

  • How to do the Unicode Check for Business Objects ?

    Hi all,
    How to do the Unicode Check for Business Objects ?
    Note: All business Objects are stored in BOR (Business Objects Repositary)
    Thanks in advance
    Sri..

    Hi..
    i have used the  UCCHECK  transaction for some business Objects
    For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
    and for Business Objects it showing the message like : There is no program corresponding to this selection.
    Why system is showing like this ?
    Thanks in advance
    Sri..

  • How to setting for the number range for Business Partner

    Dear Sir,
    I create the new role for Business Parnter , However, I would like to set the new number range for that buiness Partner with that role.
    Please kindly advise what is the step to do.
    Thank you and best regards,
    Vimol

    Hi Vimol,
    In CRM  standard system it is not possible to link specific role with specific grouping. 
    To achive the same go to following IMG path:
    SAP Implementation Guide>Cross-Application Components>SAP Business Partner>Business Partner>Basic Settings>Number Ranges and Groupings>
    Define Groupings and Assign Number Ranges
    Hope you selected the opton button for column 'Int Std.
    I already suggested a work around above.
    Best Regards,
    Satish Mathala

  • How do I OUTPUT an edited picture file from the iPad (latest) to an external USB for easy transfer?

    I am a photographer and I use my camera and iPad everyday. Camera takes pictures, connect to iPad, edit pictures with iPad software, output to Internet somwhere (Dropbox, etc..).
    However, sometimes I need to hand someone a USB stick with an edited picture on it that came directly from the iPad. I know that I could do it by buying another computer but that would be silly. I do not have another computer.
    I need to get the picture file OFF the iPad onto an external storage device (USB stick for instance). Can anyone help?

    Currently you can't use the camera connection kit to export pic to a USB thumb drive or an SD card.
     Cheers, Tom

  • How do I get a picture to fit the full frame size?

    I uploaded pictures into premiere pro and the picture is tall enough for the frame but not wide enough. I want to get rid of the black border without stretching the picture, How do i do so?

    If your images are an aspect that does not fit easily into
    a standard video frame, you might need to scale up
    (or preferably down) and reposition your images to fit.
    What are your image dimensions?
    What are your Sequence settings?
    What is the intended destination for your finished video?
    Premiere Pro / Motion: position, scale, and rotate a clip
    http://help.adobe.com/en_US/premierepro/cs/using/WSC7A162B6-6EF1-49e1-8622-8127366710BB.ht ml
    How do I choose the right sequence settings?
    http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
    Also, make sure you're running the most current update (CS6.0.5).
    Within Premiere:  Help > Updates...

  • Picture wont fit the screen

    All,
    i am using my macbook pro on my tv it a 32 in. sony LCD and i cant get the picture to fit right, with overscan it cuts off some of the screen (the whole menu bar) and with overscan off i have a smaller screen on the tv (black around all sides). i am using a DVI to HDMI cable. any help?!!

    Have you checked the resolution being output to the TV? Check the resolution of your TV, and then open System Preferences -> Displays. You can change the resolution to the TV there. It might solve the problem. It is possible, that due to resolution differences between the computer and TV, it won't fit the screen exactly.

  • What are the certification books for Business objects Xi developer certifi?

    Hi all,
    i am planning to take up business objects certifications Can anyone tell me the prescribes books for the certification? i am able to find out the exam codes from persaon vue but no the Prescribed books can anyone pls guide me on this!!
    Thanks
    Pooja

    Hi Pooja,
    I am also looking for Business Objects certification materials. but didn't find any where.
    If you find, please can you advice me on this.
    very appreciated on your help.
    Many Thanks
    Sree

  • Using an application built with the iPhone SDK for business

    Hi,
    I've just finished making an application for a university project I am working on, its designed to show the benefits of using mobile technology in businesses. But I didn't totally think this through. After demonstrating this application to them, they've now asked if they can have this software on there devices to test and evaluate it. I had to say that I honestly don't know.
    Is it possible to distribute an application I have made only to those who I choose? More specifically this is an application to be ran on iPod touches, how would I only allow my colleges to install this application?
    I've heard of businesses using iPhone for business, but how exactly do they do it?
    Thanks,
    Si.

    Thanks etresoft,
    I have a Developers account so testing the device on other iPod's/iPhone's shouldn't be a problem then. But what about distribution on a large scale, if they decided to use this for every employee, 1000+, is there a method to do this?
    After researching I have discovered that a business can have an enterprise developers account, would this qualify for installing a private application on 1000+ devices? This will probably never happen, but as this is a uni project, I need to cover all aspects. Including if this is feasibly possible.
    Thanks,
    Si.

  • Can anybody Provide the Docs/Ppts for Business content

    Hi
    Can anyone Provide the Docs/Ppts for Businesscontent.
    to my id      [email protected].
    Thanks in Advance
    Chaitanya

    Hi,
    Refer SAP Help for Buss Content
    http://help.sap.com/saphelp_bw31/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm.

  • How to Enter the Mobile number for Business Partner

    Dear CRM ABAPers,
               I am creating the Business Partner Using the BAPI "BAPI_BUPA_CREATE_FROM_DATA".
    But I am not able to Enter the Mobile number for the Business Partner.Please help me how to Do this
    It is very Urgent Requirement.
    Thanks & Regards,
    Ashok.

    Hello Ashok,
             Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
    Hope it helps.
    Thanks,
    Sriram S

  • Why is setting wallpaper impossible to get the picture to fit the screen, it completely ruins my pictures.

    Why is it impossible to set your wallpaper without it being blown out of proportion and ruining perfect pictures.......

    Since the introduction of the parallax feature in iPad, resizing photos for background pictures no longer works.
    Higher definition pictures work well, but older smaller pictures don't.  One option that many do is open your camera roll and open the picture you want to use.  Size it the way you want and then take a screen shot of that picture, which will store in your camera roll and will work for your background picture.
    To take a screen shot hold your finger on the home button and then tap the power button and you'll hear your camera shutter take the screen shot.

  • ADVANCED: Is manually editing a SparseBundle partition the best approach for backing up 2 Macs to 1 Time Capsule?

    Problem/Question: I want to back up 2 macs to 1 Time Capsule, AND provide each of them with an equal amount of space.
    Issues:
    — to ensure one doesnt "out backup the other" - AND since it isnt possible (practically) to Partition the HDD within the Time Capsule
    or in other words: to prevent 1 computer from taking more space for itself by providing an equal amount of backup space to each computer)
    *Without manually removing the HDD inside the Time Capsule, docking it and partitioning it in DiskUtility and then remounting it into the Time Capsule...
    I understand that it is possible to restrict the size of the SparseBundles, so in theory, one could make at 2TB Time Capsule have a 1TB a sparsebundle for EACH computer, and thus would leave each computer with a maxium 1TB each of backup space.
    Following Pondini's instuctions for SparseBundle editing here:
    http://pondini.org/TM/A8.html
    Is this reccomendable? Any issues I would encounter? or other suggestions for how to proceed?
    Thanks
    —James
    PS - Manditory complaining moment: Why can't Apple just enable a Partioning option in AirPort Utility so we dont have to worry about this?!

    The disk space is not adequate for the operation.. archive off the existing backup if you need it.. then start a new backup from each computer.. once you have a new clean backup then set one to 1TB (remember a 2TB only formats to 1.8TB though, so you really should set one sparsebundle to 800GB.. and leave the other one to fill the remaining space.. the disk must have 10-25% free space remaining for backups to work.
    Note what Pondini says..
    It may not "stick" on Snow Leopard 10.6.3 and 10.6.4, and on some occasions, Mountain Lion.
    This is not a 100% solution.. Even on ML it did not work reliably.. and if that is the case you can almost predict Mavericks will be worse... before it gets better.
    James died before Mavericks came out so unfortunately we have no more information.. but Mavericks and how it handles sparsebundles could well be different.

  • How do I edit or turn off the autofill username for Comcast?

    Overtime I have accumulated a numberof autofill usernames at the Comcast signin. (due to typos, etc.) So I now have this long list of usernames to choose from. How do I edit this list or delete this function entirely?

    You're welcome

Maybe you are looking for

  • HT202213 How do I unregister a computer with home sharing, to register a different one?

    How do I unregister a computer with home sharing, to register a different one?

  • Installation EHP (1+2+3) 4 and Installation NW EHP1

    Hello, We have to install all EHP (1-4) for our ERP 6.0 (SPS9), and as well the EHP 1 for NW. We have all DVDs available (EHP4 READY, etc.) Have I install first the EHP 3 via SPAM/SAINT, and then the EHP4 with the EHPi ? Or can I start the installati

  • Navigational problem

    Hi all, I have a requirment where i have to navigate in the query form one query (in web template) to another .Like right click on the report GOTO-----> to the other report how is this navigational possible.Please help me out. Thanks in advance. Vish

  • Problem with PageFormat when printing

    Hi. I use the following class to print large JPanels, but I have a problem with the PageFormat. For example: I want to print a JPanel called labelPanel, so I write "PrintUtilities.printComponent(labelPanel);". It will now print this Panel on multible

  • Average Calculation for the Dynamically Changing Columns

    Hello Experts, We have to design the following scenario in a query in the query designer. Variable Selection = 0CALMONTH Range Value The Report Data should be as below For Example: 0CALMONTH = MONTH1 to MONTH3 MONTH1--MONTH2-- MONTH3 Statistical Fore