Editing SAP Standard Business Object

Hi,
   There is a SAP standard business object "BUS20370". This object is in implemented status..... I am not able to use or inherit from this object as it is not released. Can i go ahead and relese it ?
Regards,
Bharath Mohan B

Hi
I think the Object number is BUS2037 (Customer billing Document), as there is no object with number BUS20370.
Yes You can change it to release status, to inherit it, if it is in IMPLEMENTED status, But most of the objects will be in Released status only. check it.
Goto SWO1
enter object name
display
from menu EDIT-> change release status->  change
Create a sub object by pressing CREATE button and use
Regards
Anji

Similar Messages

  • CRM standard Business objects reports or dashboard content to enable

    Hi
    Can anyone provide the inputs on availability of standard Business objects reports or xcelsius dashboards in CRM as content.
    How to activate and use them. (not the BI content).

    Hi
    I think in SAP BO Not Available Standard Business Content only based on user requirement the Bo Consultant Report is Created.
    Regards
    R.S.Reddy
    Edited by: R.S REDDY on Feb 28, 2012 6:26 AM

  • Error in Standard Business Object BUS2012

    Hi Friends..
    Iam using standard business object BUS2012 for purchase order creation workflow.
    while creating PO the workflow need to be triggered.
    But i got an error message in BUS2012 thatswhy the workflow was not triggered while creating PO.
    i got the following error
    "Basic IDOC type PORDCR02 is unknown"because of this error the workflow was not getting triggered..
    so how can i solve this problem..
    Thanks
    Gowrishankar

    Hi Karri..
    I checked already,the erroe occured in business object only..
    because if i run the business object in local system it executes perfectly..(if iam using  BUS2012 in local system it will trigger the workflow when iam creating PO)
    but in client system it wont execute...
    it shows the error..(if iam using BUS2012 in client system there is no workflow got triggered when iam creating PO)
    so if you know how to solve problem..
    let me know..
    Thanks
    Gowrishankar
    Edited by: gowrishankar p on Dec 27, 2007 10:35 AM

  • Download SAP Standard Business content

    can you pls give me complete path to download SAP Standard Business content
    1) 55610_AETICLE.zip
    2) 55610_BUSINESS_PARTNER.zip
    3) 55610_CUSTOMER.zip
    4) 55610_EMPLOYEE.zip
    5) 55610_MATERIAL.zip
    6) 55610_PRODUCT.zip
    7) 55610_VENDOR.zip
    thanks
    mainan

    Please refer the link as follows on Service Market Place:
    https://websmp210.sap-ag.de/swdc
    then on the left hand side, click on
    Search for all Categories, in search term write "MDMBC55006P_2-10003437.ZIP" and search method = "All Terms" then press enter.
    then download this Business Content , in Zip folder you will get
    55520_Article.zip, 55520_Customer.zip etc
    you can use this SP6 Patch 2 for your SP6 Patch1.It works.
    Hope it helps you,
    Mandeep Saini

  • SAP WF Business Object methods call our of SAP world

    Hi Guys,
    I want to know if the Methods of SAP workflow business object are always only be used in tasks in the workflows or they can also be called from out of sap world??? If yes then how???
    Seconly does BAPI property of the method (method property where we can provide BAPI function module) has to do with remote call for this method?? What exactly is the use of BAPI property of any method in SAP workflow business object??
    Regards,
    NK

    Hi Naeem,
    Generally we are using SAP BOBI as  best BI adhoc, canned  Webi report  and customizing Dashboard , Crystal report preparation in  Complex Billing report by using Web intelligence , Crystal report  and Digital dashboard  is best for KPI analysis , predictive analysis for Project , Management also .
    Their  flows are very simple by using specific SAP recommended Specific tool for any MIS , BSCS billing BI reports preparation that we are following in specific domain based Project.
    BAPI reporting is part of ABAP reporting , that you can  flow in Mr Rob statement .
    Regards
    Asish

  • Insert or Update data in SAP with Business Objects?

    Hi all,
    I am new to Business Objects world with my little expertise in Crystal Reports and Xclesius.
    Could you please clarify me that is there any solution or technology or Product of Business Objects which not only make impressive dashboards and analyze the data but also can communicate with back end SAP R/3 to save or update data.
    We are actually analyzing our Client requirements in which there is a need of Dashboards as well as some custom configurations that needs to be saved somewhere in the SAP system in order to make decisions in future.
    Our back end system is SAP BW. One possibility is to use Adobe Flex as a base architecture with BSP and BW but we are more concerned with what BOBJ provides.
    Looking forward for your suggestions.
    Kind Regards
    Umer Farooq

    GR81 wrote:
    I would like to know how I can insert or update data in a Google Spreadsheet from an Oracle Database please?
    Thanks,you can't since Oracle knows nothing about spreadsheets; Google or otherwise.

  • SAP TM / Business object creation

    Hi,
    this my first posting, so please excuse that I am still searching for the right place to put my message ...
    I hope this is the right group.
    I have some questions concerning SAP Transportation management; I haven't seen a special group for that, so I am here now.
    In SAP TM there are some business objects like shipment requests, shipment orders and so on. Is there any documentation available how to program with these objects?
    I have found some ways to access them by going through the SAP source code, but that's sometimes very hard, and I couldn't find yet the place where the node ids for the nodes pf the object are created.
    Best regards
    Martin

    Hi Keerthi,
    thanks for your answer. I think that there is something different in the case of TM business objects. I can't see them in SWO1, and have not found any BAPI to handle the objects.
    There is a transaction /TMSF/CONF_UI to display and change the business objects in SAP TM; and there are some menu items to create dictionary elements, access classes and wrapper classes, but they don't work (and I am not sure if this is the right way). In SAP TM source code, there are some general classes and interfaces that are used to access the TM business objects (like /SCMTMS/IF_LCP_FACADE), but they are all TM specific, so perhaps there is really a big difference between TM objects and other business objects. Maybe SAP has only chosen the same name for them.
    SAP TM is still in an early phase of development, so I could imagine that there are still some missing things inside. But at least I managed to do some object access using the same methods as SAP did.
    Best regards
    Martin

  • SAP standard business process mapping

    Hi All,
    Can you provide any link or document where I can find standard business process mapping with various SAP modules for Hi-tech manufacturing industry.

    Cool,
    The below link should help you.
    http://help.sap.com/bp_hightechv1600/HighTech_DE/html/index.htm
    In the area Industry-specific information you will find general industry information and general information on SAP Best Practices for High Tech.
    The section Business Blueprint provides a SAP Best Practices Solution Scope document which outlines the processes and functions covered by the SAP Best Practices for High Tech. It describes the various functions and explains their business purposes.
    The SAP Best Practices Solution Map shows how various processes are covered by SAP Best Practices and illustrates the preconfigured processes in a consistent, multi-level way, in order to demonstrate the value SAP Best Practices can add to a company.
    Under Preconfigured Scenarios, you will find all the scenarios in the scope of SAP Best Practices for High Tech, grouped accoring to the different SAP solutions.
    Hope this information helps too.
    Thanks,
    Ram

  • SAP standard Business Process Procedures ?

    Hi all,
    Some years ago, standard BPPs (Business Process Procedures) were availabe through the old Q&A DB.
    The document type was ZBPP.
    When I load new business processes into Solution Manager from the BPR, I get standard documentation, IMG links etc.
    Can anybody tell me, if standard BPPs (per transaction code) are still available somewhere??
    Best regards,
    Anni Futtrup

    Anni,
    Not sure exactly what docs were available in old QADB.
    SAP maintains quite a few of their 'business process procedure' docs in various places in
    http://help.sap.com/bestpractices
    If you look, for instance, at Baseline Packages; library of building blocks,
    http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
    you can find that many of the building block pages contain one or more SAP BPPs.  Example:
    Look at US building block J03 'Financial Accounting'
    http://help.sap.com/bp_bblibrary/500/html/J03_FI_EN_US.htm
    You will see a list of BPP docs, such as 'Down Payment'
    http://help.sap.com/bp_bblibrary/500/Documentation/J03_AP_DownPaym_BPP_EN_US.doc
    Regards,
    DB49

  • HR-Training and Event Management -Standard business Objects

    Hi
         Can any body let me know,what are all the Standard
    1.Data Dource.
    2.Cube.
    3.Transformation...
    4.Infopackage
    5.DTP
    available for HR-Training and Event Management Module.
    Thanks in Advance.
    Regards,
    MRC.

    Hi,
    Look at this link:
    http://help.sap.com/bp_biv133/html/bw.htm
    Thanks,
    Ajay

  • Performance - Integration SAP BW - Business Objects XI 3.1

    Hi to all,
    I have some performance problems when I create a report with almost 210K rows at 10 minutes.
    I don't understand what solutions I have to set in my bex query in order to make it more slow. I suspect in fact that a lot of time is spend when the system read the master data (in my bo query I include some attribute of the characteristics).
    I add that I read the data from an ODS and I don't have restriction into the key figure level or structures.
    All characteristics are selected as free characteristics and all key figures are selected in the columns.
    How can I test the improvement and different setting in order to accelarate my query ?
    Thank'you in advance!
    Edited by: Duilio Paolini on Nov 22, 2010 4:37 PM

    Hi,
    could you provide more details to the following questions:
    - which products from SAP BusinessObjects are you using ?
    - which release of those products - including service packs - are you using ?
    - what performance do you see when you execute the query in transaction RSRT ?
    When you execute the query in transaction RSRT remember that all elements from your BusinessObjects report need to be in the rows to achieve a comparable result.
    Ingo

  • SAP BI business objects Unable to Import roles

    an error has occured
    com/sap/sw/jco/JCO$function
    windows 2003 64 bit
    sap bi -3.1
    sap int kit -3.1
    Java connectors I have tried both 32 bit and 64 bit but still no luck. Do we have to set any environment variables like CLASSPATH ?if yes where?
    can any one reply??
    regards
    letz

    Thx to you guyz . tht really helps
    I have one more question
    After installation of sap integration kit I was unable to see the SAP option in authentication at CMC login page but logging as enterprise authentication the SAP option was available inside CMC for SAP authentication configration .?
    Edited by: letzfriend on Nov 10, 2010 10:03 AM

  • Update Database Through XML file using SAP B1 business objects

    Hello everyone,
    I am facing a problem ie I am not able to update the Database(SQL 2000) through an XML file.
    Though i am able to insert the data in the databse using xml file but unable to update that data.
    The tables i want to update are OITM,ITM1,OITW. While i was trying to update  the Databse i was getting an error ie " -1107 Object's key is not set".
    I dont want to use DTW for importing or anything.
    Kindly help me out why i am facing this problem asap...

    Hi Pranay,
    My case was that I wanted to replicate an item from one company to another (I guess that's your case also). What I finally did is copy field by field the objects I needed. Later I've find out the solution given here,
    Copy items between databases
    but I haven't try it out. I expect your comments about it :).
    Regards,
    Ian

  • Is SAP CRM ,  Business Object based ?

    Hi all
       I am really New to the raw SAP CRM.
       I am working on SAP CRM SALES(Contract Mgmt) space.
       Could you please help me in TECHNICAL understanding of the basics of SAP CRM on Sales area?
    Many Thanks
    Jack

    Hi Jack,
    Look at <b>Brainstorming Discussion</b> - Links to CRM Documentation .
    Brainstorming Discussion - Links to CRM Documentation
    Reward points if it is helpful
    Cheers
    Alfred

  • Business object for user master in SAP

    Is there a standard business object for User Master in SAP?
    Somehow I just could not find it.
    Thanks.

    Hi Jeff,
    I think the BOR - USER should do your purpose.
    Regards
    <i><b>Raja Sekhar</b></i>

Maybe you are looking for